3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

init sd card after wizard

Browse source
This commit is contained in:
PavelSindler 2017-12-13 16:27:15 +01:00
parent e3b693c71d
commit d1224834c1
1 changed files with 5 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
Firmware/Marlin_main.cpp
View file

@ -1062,10 +1062,7 @@ void setup()
// Enable Toshiba FlashAir SD card / WiFi enahanced card.
card.ToshibaFlashAir_enable(eeprom_read_byte((unsigned char*)EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY) == 1);
// Force SD card update. Otherwise the SD card update is done from loop() on card.checkautostart(false),
// but this times out if a blocking dialog is shown in setup().
card.initsd();
if (eeprom_read_dword((uint32_t*)(EEPROM_TOP - 4)) == 0x0ffffffff &&
eeprom_read_dword((uint32_t*)(EEPROM_TOP - 8)) == 0x0ffffffff &&
eeprom_read_dword((uint32_t*)(EEPROM_TOP - 12)) == 0x0ffffffff) {
@ -1078,6 +1075,10 @@ void setup()
eeprom_write_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1); //run wizard
}
// Force SD card update. Otherwise the SD card update is done from loop() on card.checkautostart(false),
// but this times out if a blocking dialog is shown in setup().
card.initsd();
if (eeprom_read_byte((uint8_t*)EEPROM_POWER_COUNT) == 0xff)
eeprom_write_byte((uint8_t*)EEPROM_POWER_COUNT, 0);
if (eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT) == 0xff)