diff --git a/Firmware/temperature.cpp b/Firmware/temperature.cpp
index 620819da..97804d16 100644
--- a/Firmware/temperature.cpp
+++ b/Firmware/temperature.cpp
@@ -460,33 +460,36 @@ extern void stop_and_save_print_to_ram(float z_move, float e_move);
 extern void restore_print_from_ram_and_continue(float e_move);
 
 void fanSpeedError(unsigned char _fan) {
-
 	if (card.sdprinting) {
-		if(heating_status != 0) lcd_print_stop();
+		if (heating_status != 0) {
+			lcd_print_stop();
+		}
 		else lcd_sdcard_pause();
 	}
-
-	setTargetHotend0(0);
-		
-	//lcd_update();
-	WRITE(BEEPER, HIGH);
-	delayMicroseconds(2000);
-	WRITE(BEEPER, LOW);
-	delayMicroseconds(100);
-
-
+	else {
+		setTargetHotend0(0);
+	}
 	SERIAL_ERROR_START;
 	switch (_fan) {
 	case 0:
-		fanSpeed = 255;
-		//lcd_print_stop();
 		SERIAL_ERRORLNPGM("ERROR: Extruder fan speed is lower then expected");
-		LCD_ALERTMESSAGEPGM("Err: EXTR. FAN ERROR");
+		if (get_message_level() == 0) {
+			WRITE(BEEPER, HIGH);
+			delayMicroseconds(200);
+			WRITE(BEEPER, LOW);
+			delayMicroseconds(100);
+			LCD_ALERTMESSAGEPGM("Err: EXTR. FAN ERROR");
+		}
 		break;
 	case 1:
-		//stop_and_save_print_to_ram(0, 0);
 		SERIAL_ERRORLNPGM("ERROR: Print fan speed is lower then expected");
-		LCD_ALERTMESSAGEPGM("Err: PRINT FAN ERROR");
+		if (get_message_level() == 0) {
+			WRITE(BEEPER, HIGH);
+			delayMicroseconds(200);
+			WRITE(BEEPER, LOW);
+			delayMicroseconds(100);
+			LCD_ALERTMESSAGEPGM("Err: PRINT FAN ERROR");
+		}
 		break;
 	}
 }
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index 4c0acb63..60a02d54 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -828,6 +828,7 @@ void lcd_sdcard_pause() {
 
 static void lcd_sdcard_resume() {
 	lcd_return_to_status();
+	lcd_reset_alert_level(); //for fan speed error
 	lcd_commands_type = LCD_COMMAND_LONG_PAUSE_RESUME;
 }
 
@@ -5498,6 +5499,10 @@ void lcd_reset_alert_level()
   lcd_status_message_level = 0;
 }
 
+uint8_t get_message_level()
+{
+	return lcd_status_message_level;
+}
 #ifdef DOGLCD
 void lcd_setcontrast(uint8_t value)
 {
diff --git a/Firmware/ultralcd.h b/Firmware/ultralcd.h
index 9b749a33..77e89059 100644
--- a/Firmware/ultralcd.h
+++ b/Firmware/ultralcd.h
@@ -14,6 +14,7 @@
   void lcd_setstatuspgm(const char* message);
   void lcd_setalertstatuspgm(const char* message);
   void lcd_reset_alert_level();
+  uint8_t get_message_level();
   void lcd_adjust_z();
   void lcd_pick_babystep();
   void lcd_alright();