Merge remote-tracking branch 'upstream/MK3' into MK3-Fix_M120_M121

.editorconfig

@@ -0,0 +1,14 @@
+#-*-mode:conf-*-
+# editorconfig file (see EditorConfig.org)
+
+root                        = true
+
+[*]
+end_of_line                 = lf
+insert_final_newline        = true
+charset                     = utf-8
+trim_trailing_whitespace    = true
+indent_style                = space
+indent_size                 = 4
+tab_width                   = 4
+max_line_length             = 100

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,31 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: "[BUG]<Enter comprehensive title>"
+labels: bug
+assignees: ''
+
+---
+
+Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
+
+**Printer type** - [e.g. MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2]
+**Printer firmware version**-  [e.g. 3.8.1, 3.8.1-RC1, ...]
+
+**MMU Upgrade** - [e.g. MMU2S, MMU2, MMU1]
+**MMU upgrade firmware version [e.g. 1.0.6, 1.0.6-RC2, ...]
+
+**Describe the bug**
+  A clear and concise description of what the bug is.
+  
+**To Reproduce**
+  Please describe steps to reproduce the behavior.
+  
+**Expected behavior**
+  A clear and concise description of what you expected to happen.
+  
+**G-code**
+  Please attach a G-code. This will make it easier for us to replicate the error.
+
+**Video**
+  Please attach a video. It usually helps to solve the problem.

.github/ISSUE_TEMPLATE/enhancement.md

@@ -0,0 +1,20 @@
+---
+name: Enhancement
+about: Suggest an idea for this project
+title: "  [ENHANCEMENT]<Enter comprehensive title>"
+labels: enhancement
+assignees: ''
+
+---
+
+Please, before you create a new feature request, please make sure you searched in open and closed issues and couldn't find anything that matches.
+
+Enter what type of printer or upgrade the enhancement applies to.
+**Printer type** - [e.g. MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2]
+**MMU Upgrade** - [e.g. MMU2S, MMU2, MMU1]
+
+**Is your enhancement related to a problem? Please describe.**
+  A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+  
+**Describe the solution you'd like**
+  A clear and concise description of what you want to happen.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: "[FEATURE REQUEST]<Enter comprehensive title>"
+labels: feature request
+assignees: ''
+
+---
+
+Please, before you create a new feature request, please make sure you searched in open and closed issues and couldn't find anything that matches.
+
+If it makes sense, enter what type of printer or upgrade the feature request applies to.
+**Printer type** - [e.g. MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2]
+**MMU Upgrade** - [e.g. MMU2S, MMU2, MMU1]
+
+**Is your feature request related to a problem? Please describe.**
+  A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+  
+**Describe the solution you'd like**
+  A clear and concise description of what you want to happen.

.github/ISSUE_TEMPLATE/question.md

@@ -0,0 +1,12 @@
+---
+name: Question
+about: What do you want to know?
+title: "[QUESTION]<Enter comprehensive title>"
+labels: question
+assignees: ''
+
+---
+
+Please, before you create a new question, please make sure you searched in open and closed issues and couldn't find anything that matches.
+
+**What is your question?**

Firmware/Configuration.h

@@ -345,7 +345,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
   #define Y_PROBE_OFFSET_FROM_EXTRUDER -29
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35
 
-  #define Z_RAISE_BEFORE_HOMING 4       // (in mm) Raise Z before homing (G28) for Probe Clearance.
+  #define Z_RAISE_BEFORE_HOMING 5       // (in mm) Raise Z before homing (G28) for Probe Clearance.
                                         // Be sure you have this distance over your Z_MAX_POS in case
 
   #define XY_TRAVEL_SPEED 8000         // X and Y axis travel speed between probes, in mm/min
@@ -549,6 +549,12 @@ enum CalibrationStatus
     CALIBRATION_STATUS_UNKNOWN = 0,
 };
 
+// Try to maintain a minimum distance from the bed even when Z is
+// unknown when doing the following operations
+#define MIN_Z_FOR_LOAD    50
+#define MIN_Z_FOR_UNLOAD  20
+#define MIN_Z_FOR_PREHEAT 10
+
 #include "Configuration_adv.h"
 #include "thermistortables.h"
 

Firmware/Marlin.h

@@ -296,6 +296,7 @@ void setPwmFrequency(uint8_t pin, int val);
 extern bool fans_check_enabled;
 extern float homing_feedrate[];
 extern bool axis_relative_modes[];
+extern float feedrate;
 extern int feedmultiply;
 extern int extrudemultiply; // Sets extrude multiply factor (in percent) for all extruders
 extern int extruder_multiply[EXTRUDERS]; // sets extrude multiply factor (in percent) for each extruder individually
@@ -358,9 +359,6 @@ extern int fan_speed[2];
 // Handling multiple extruders pins
 extern uint8_t active_extruder;
 
-
-#endif
-
 //Long pause
 extern unsigned long pause_time;
 extern unsigned long start_pause_print;
@@ -398,7 +396,7 @@ extern uint16_t gcode_in_progress;
 extern LongTimer safetyTimer;
 
 #define PRINT_PERCENT_DONE_INIT   0xff
-#define PRINTER_ACTIVE (IS_SD_PRINTING || is_usb_printing || isPrintPaused || (custom_message_type == CustomMsg::TempCal) || saved_printing || (lcd_commands_type == LcdCommands::Layer1Cal) || card.paused || mmu_print_saved)
+#define PRINTER_ACTIVE (IS_SD_PRINTING || is_usb_printing || isPrintPaused || (custom_message_type == CustomMsg::TempCal) || saved_printing || (lcd_commands_type == LcdCommands::Layer1Cal) || mmu_print_saved)
 
 //! Beware - mcode_in_progress is set as soon as the command gets really processed,
 //! which is not the same as posting the M600 command into the command queue
@@ -457,6 +455,7 @@ extern void print_mesh_bed_leveling_table();
 
 extern void stop_and_save_print_to_ram(float z_move, float e_move);
 extern void restore_print_from_ram_and_continue(float e_move);
+extern void cancel_saved_printing();
 
 
 //estimated time to end of the print
@@ -513,4 +512,6 @@ void M600_wait_for_user(float HotendTempBckp);
 void M600_check_state(float nozzle_temp);
 void load_filament_final_feed();
 void marlin_wait_for_click();
-void marlin_rise_z(void);
+void raise_z_above(float target, bool plan=true);
+
+#endif

Firmware/Marlin_main.cpp

@@ -63,6 +63,7 @@
 
 #include "menu.h"
 #include "ultralcd.h"
+#include "backlight.h"
 
 #include "planner.h"
 #include "stepper.h"
@@ -309,6 +310,8 @@ bool no_response = false;
 uint8_t important_status;
 uint8_t saved_filament_type;
 
+#define SAVED_TARGET_UNSET (X_MIN_POS-1)
+float saved_target[NUM_AXIS] = {SAVED_TARGET_UNSET, 0, 0, 0};
 
 // save/restore printing in case that mmu was not responding 
 bool mmu_print_saved = false;
@@ -329,11 +332,15 @@ float destination[NUM_AXIS] = {  0.0, 0.0, 0.0, 0.0};
 
 // For tracing an arc
 static float offset[3] = {0.0, 0.0, 0.0};
-static float feedrate = 1500.0, next_feedrate, saved_feedrate;
 
-// Determines Absolute or Relative Coordinates.
+// Current feedrate
-// Also there is bool axis_relative_modes[] per axis flag.
+float feedrate = 1500.0;
-static bool relative_mode = false;  
+
+// Feedrate for the next move
+static float next_feedrate;
+
+// Original feedrate saved during homing moves
+static float saved_feedrate;
 
 const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42
 
@@ -373,8 +380,8 @@ bool saved_printing = false; //!< Print is paused and saved in RAM
 static uint32_t saved_sdpos = 0; //!< SD card position, or line number in case of USB printing
 uint8_t saved_printing_type = PRINTING_TYPE_SD;
 static float saved_pos[4] = { 0, 0, 0, 0 };
-//! Feedrate hopefully derived from an active block of the planner at the time the print has been canceled, in mm/min.
+static uint16_t saved_feedrate2 = 0; //!< Default feedrate (truncated from float)
-static float saved_feedrate2 = 0;
+static int saved_feedmultiply2 = 0;
 static uint8_t saved_active_extruder = 0;
 static float saved_extruder_temperature = 0.0; //!< Active extruder temperature
 static bool saved_extruder_under_pressure = false;
@@ -989,10 +996,6 @@ void setup()
 
 	ultralcd_init();
 
-#if (LCD_BL_PIN != -1) && defined (LCD_BL_PIN)
-	analogWrite(LCD_BL_PIN, 255); //set full brightnes
-#endif //(LCD_BL_PIN != -1) && defined (LCD_BL_PIN)
-
 	spi_init();
 
 	lcd_splash();
@@ -2104,6 +2107,58 @@ bool check_commands() {
 	
 }
 
+
+// raise_z_above: slowly raise Z to the requested height
+//
+// contrarily to a simple move, this function will carefully plan a move
+// when the current Z position is unknown. In such cases, stallguard is
+// enabled and will prevent prolonged pushing against the Z tops
+void raise_z_above(float target, bool plan)
+{
+    if (current_position[Z_AXIS] >= target)
+        return;
+
+    // Z needs raising
+    current_position[Z_AXIS] = target;
+
+#if defined(Z_MIN_PIN) && (Z_MIN_PIN > -1) && !defined(DEBUG_DISABLE_ZMINLIMIT)
+    bool z_min_endstop = (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING);
+#else
+    bool z_min_endstop = false;
+#endif
+
+    if (axis_known_position[Z_AXIS] || z_min_endstop)
+    {
+        // current position is known or very low, it's safe to raise Z
+        if(plan) plan_buffer_line_curposXYZE(max_feedrate[Z_AXIS], active_extruder);
+        return;
+    }
+
+    // ensure Z is powered in normal mode to overcome initial load
+    enable_z();
+    st_synchronize();
+
+    // rely on crashguard to limit damage
+    bool z_endstop_enabled = enable_z_endstop(true);
+#ifdef TMC2130
+    tmc2130_home_enter(Z_AXIS_MASK);
+#endif //TMC2130
+    plan_buffer_line_curposXYZE(homing_feedrate[Z_AXIS] / 60, active_extruder);
+    st_synchronize();
+#ifdef TMC2130
+    if (endstop_z_hit_on_purpose())
+    {
+        // not necessarily exact, but will avoid further vertical moves
+        current_position[Z_AXIS] = max_pos[Z_AXIS];
+        plan_set_position(current_position[X_AXIS], current_position[Y_AXIS],
+                          current_position[Z_AXIS], current_position[E_AXIS]);
+    }
+    tmc2130_home_exit();
+#endif //TMC2130
+    enable_z_endstop(z_endstop_enabled);
+}
+
+
 #ifdef TMC2130
 bool calibrate_z_auto()
 {
@@ -2484,9 +2539,7 @@ static void gcode_G28(bool home_x_axis, long home_x_value, bool home_y_axis, lon
 
 	//if we are homing all axes, first move z higher to protect heatbed/steel sheet
 	if (home_all_axes) {
-		current_position[Z_AXIS] += MESH_HOME_Z_SEARCH;
+        raise_z_above(MESH_HOME_Z_SEARCH);
-		feedrate = homing_feedrate[Z_AXIS];
-		plan_buffer_line_curposXYZE(feedrate / 60, active_extruder);
 		st_synchronize();
 	}
 #ifdef ENABLE_AUTO_BED_LEVELING
@@ -2597,26 +2650,21 @@ static void gcode_G28(bool home_x_axis, long home_x_value, bool home_y_axis, lon
         #ifndef Z_SAFE_HOMING
           if(home_z) {
             #if defined (Z_RAISE_BEFORE_HOMING) && (Z_RAISE_BEFORE_HOMING > 0)
-              destination[Z_AXIS] = Z_RAISE_BEFORE_HOMING * home_dir(Z_AXIS) * (-1);    // Set destination away from bed
+              raise_z_above(Z_RAISE_BEFORE_HOMING);
-              feedrate = max_feedrate[Z_AXIS];
-              plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate, active_extruder);
               st_synchronize();
             #endif // defined (Z_RAISE_BEFORE_HOMING) && (Z_RAISE_BEFORE_HOMING > 0)
             #if (defined(MESH_BED_LEVELING) && !defined(MK1BP))  // If Mesh bed leveling, move X&Y to safe position for home
-      			  if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] )) 
+              raise_z_above(MESH_HOME_Z_SEARCH);
-      			  {
+              st_synchronize();
-                homeaxis(X_AXIS);
+              if (!axis_known_position[X_AXIS]) homeaxis(X_AXIS);
-                homeaxis(Y_AXIS);
+              if (!axis_known_position[Y_AXIS]) homeaxis(Y_AXIS);
-      			  } 
               // 1st mesh bed leveling measurement point, corrected.
               world2machine_initialize();
               world2machine(pgm_read_float(bed_ref_points_4), pgm_read_float(bed_ref_points_4+1), destination[X_AXIS], destination[Y_AXIS]);
               world2machine_reset();
               if (destination[Y_AXIS] < Y_MIN_POS)
                   destination[Y_AXIS] = Y_MIN_POS;
-              destination[Z_AXIS] = MESH_HOME_Z_SEARCH;    // Set destination away from bed
+              feedrate = homing_feedrate[X_AXIS] / 20;
-              feedrate = homing_feedrate[Z_AXIS]/10;
-              current_position[Z_AXIS] = 0;
               enable_endstops(false);
 #ifdef DEBUG_BUILD
               SERIAL_ECHOLNPGM("plan_set_position()");
@@ -2775,7 +2823,10 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
 	#ifdef TMC2130
 	FORCE_HIGH_POWER_START;
 	#endif // TMC2130
-	// Only Z calibration?
+    
+    FORCE_BL_ON_START;
+	
+    // Only Z calibration?
 	if (!onlyZ)
 	{
 		setTargetBed(0);
@@ -2963,6 +3014,9 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
 #ifdef TMC2130
 	FORCE_HIGH_POWER_END;
 #endif // TMC2130
+    
+    FORCE_BL_ON_END;
+    
 	return final_result;
 }
 
@@ -3143,15 +3197,6 @@ static void gcode_M600(bool automatic, float x_position, float y_position, float
     custom_message_type = CustomMsg::Status;
 }
 
-//! @brief Rise Z if too low to avoid blob/jam before filament loading
-//!
-//! It doesn't plan_buffer_line(), as it expects plan_buffer_line() to be called after
-//! during extruding (loading) filament.
-void marlin_rise_z(void)
-{
-    if (current_position[Z_AXIS] < 20) current_position[Z_AXIS] += 30;
-}
-
 void gcode_M701()
 {
 	printf_P(PSTR("gcode_M701 begin\n"));
@@ -3180,7 +3225,7 @@ void gcode_M701()
 		plan_buffer_line_curposXYZE(400 / 60, active_extruder); //fast sequence
 		st_synchronize();
 
-		marlin_rise_z();
+        raise_z_above(MIN_Z_FOR_LOAD, false);
 		current_position[E_AXIS] += 30;
 		plan_buffer_line_curposXYZE(400 / 60, active_extruder); //fast sequence
 		
@@ -3625,7 +3670,7 @@ void process_commands()
     
     Set of internal PRUSA commands
       
-          PRUSA [ Ping | PRN | FAN | fn | thx | uvlo | fsensor_recover | MMURES | RESET | fv | M28 | SN | Fir | Rev | Lang | Lz | Beat | FR ]
+          PRUSA [ Ping | PRN | FAN | fn | thx | uvlo | MMURES | RESET | fv | M28 | SN | Fir | Rev | Lang | Lz | Beat | FR ]
       
       - `Ping` 
       - `PRN` - Prints revision of the printer
@@ -3633,7 +3678,6 @@ void process_commands()
       - `fn` - Prints farm no.
       - `thx` 
       - `uvlo` 
-      - `fsensor_recover` - Filament sensor recover - restore print and continue
       - `MMURES` - Reset MMU
       - `RESET` - (Careful!)
       - `fv`  - ?
@@ -3683,12 +3727,6 @@ void process_commands()
                eeprom_update_byte((uint8_t*)EEPROM_UVLO,0); 
                enquecommand_P(PSTR("M24")); 
 		}	
-#ifdef FILAMENT_SENSOR
-		else if (code_seen("fsensor_recover")) // PRUSA fsensor_recover
-		{
-               fsensor_restore_print_and_continue();
-		}	
-#endif //FILAMENT_SENSOR
 		else if (code_seen("MMURES")) // PRUSA MMURES
 		{
 			mmu_reset();
@@ -4013,8 +4051,19 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
 
         #endif
 
+            get_coordinates(); // For X Y Z E F
+
+            // When recovering from a previous print move, restore the originally
+            // calculated target position on the first USB/SD command. This accounts
+            // properly for relative moves
+            if ((saved_target[0] != SAVED_TARGET_UNSET) &&
+                ((CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_SDCARD) ||
+                 (CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB_WITH_LINENR)))
+            {
+                memcpy(destination, saved_target, sizeof(destination));
+                saved_target[0] = SAVED_TARGET_UNSET;
+            }
 
-        get_coordinates(); // For X Y Z E F
 		if (total_filament_used > ((current_position[E_AXIS] - destination[E_AXIS]) * 100)) { //protection against total_filament_used overflow
 			total_filament_used = total_filament_used + ((destination[E_AXIS] - current_position[E_AXIS]) * 100);
 		}
@@ -5161,15 +5210,19 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
             
     //! ### G90 - Switch off relative mode
     // -------------------------------
-    case 90:
+    case 90: {
-      relative_mode = false;
+        for(uint8_t i = 0; i != NUM_AXIS; ++i)
-      break;
+            axis_relative_modes[i] = false;
+    }
+    break;
 
     //! ### G91 - Switch on relative mode
     // -------------------------------
-    case 91:
+    case 91: {
-      relative_mode = true;
+        for(uint8_t i = 0; i != NUM_AXIS; ++i)
-      break;
+            axis_relative_modes[i] = true;
+    }
+    break;
 
     //! ### G92 - Set position
     // -----------------------------
@@ -5333,21 +5386,19 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
       card.openFile(strchr_pointer + 4,true);
       break;
 
-    //! ### M24 - Start SD print
+    //! ### M24 - Start/resume SD print
     // ----------------------------------
     case 24:
-	  if (!card.paused) 
+	  if (isPrintPaused)
-		failstats_reset_print();
+          lcd_resume_print();
-      card.startFileprint();
+      else
-      starttime=_millis();
+      {
+          failstats_reset_print();
+          card.startFileprint();
+          starttime=_millis();
+      }
 	  break;
 
-    //! ### M25 - Pause SD print
-    // ----------------------------------
-    case 25:
-      card.pauseSDPrint();
-      break;
-
     //! ### M26 S\<index\> - Set SD index
     //! Set position in SD card file to index in bytes.
     //! This command is expected to be called after M23 and before M24.
@@ -5902,7 +5953,7 @@ Sigma_Exit:
     //! ### M112 - Emergency stop
     // -----------------------------------------
     case 112: 
-      kill(_n(""), 3);
+      kill(MSG_M112_KILL, 3);
       break;
 
     //! ### M140 - Set bed temperature
@@ -6165,7 +6216,6 @@ Sigma_Exit:
           LCD_MESSAGERPGM(_T(WELCOME_MSG));
           lcd_update(0);
         break;
-      #endif
 
       //! ### M81 - Turn off Power Supply
       // --------------------------------------
@@ -6189,17 +6239,18 @@ Sigma_Exit:
         LCD_MESSAGERPGM(CAT4(CUSTOM_MENDEL_NAME,PSTR(" "),MSG_OFF,PSTR(".")));
         lcd_update(0);
 	  break;
+    #endif
 
     //! ### M82 - Set E axis to absolute mode
     // ---------------------------------------
     case 82:
-      axis_relative_modes[3] = false;
+      axis_relative_modes[E_AXIS] = false;
       break;
 
     //! ### M83 - Set E axis to relative mode
     // ---------------------------------------  
     case 83:
-      axis_relative_modes[3] = true;
+      axis_relative_modes[E_AXIS] = true;
       break;
 
     //! ### M84, M18 - Disable steppers
@@ -7202,27 +7253,36 @@ Sigma_Exit:
     break;
     #endif //FILAMENTCHANGEENABLE
 
+  //! ### M25 - Pause SD print
   //! ### M601 - Pause print
+  //! ### M125 - Pause print (TODO: not implemented)
   // -------------------------------
+	case 25:
 	case 601:
 	{
-		cmdqueue_pop_front(); //trick because we want skip this command (M601) after restore
+        if (!isPrintPaused)
-		lcd_pause_print();
+        {
+            st_synchronize();
+            cmdqueue_pop_front(); //trick because we want skip this command (M601) after restore
+            lcd_pause_print();
+        }
 	}
 	break;
 
   //! ### M602 - Resume print
   // -------------------------------
 	case 602: {
-		lcd_resume_print();
+	  if (isPrintPaused)
+          lcd_resume_print();
 	}
 	break;
 
   //! ### M603 - Stop print
   // -------------------------------
-  case 603: {
+	case 603: {
 		lcd_print_stop();
 	}
+	break;
 
 #ifdef PINDA_THERMISTOR
   //! ### M860 - Wait for extruder temperature (PINDA)
@@ -7611,27 +7671,33 @@ Sigma_Exit:
     case 350: 
     {
 	#ifdef TMC2130
-		if(code_seen('E'))
+		for (int i=0; i<NUM_AXIS; i++) 
 		{
-			uint16_t res_new = code_value();
+			if(code_seen(axis_codes[i]))
-			if ((res_new == 8) || (res_new == 16) || (res_new == 32) || (res_new == 64) || (res_new == 128))
 			{
-				st_synchronize();
+				uint16_t res_new = code_value();
-				uint8_t axis = E_AXIS;
+				bool res_valid = (res_new == 8) || (res_new == 16) || (res_new == 32); // resolutions valid for all axis
-				uint16_t res = tmc2130_get_res(axis);
+				res_valid |= (i != E_AXIS) && ((res_new == 1) || (res_new == 2) || (res_new == 4)); // resolutions valid for X Y Z only
-				tmc2130_set_res(axis, res_new);
+				res_valid |= (i == E_AXIS) && ((res_new == 64) || (res_new == 128)); // resolutions valid for E only
-				cs.axis_ustep_resolution[axis] = res_new;
+				if (res_valid)
-				if (res_new > res)
 				{
-					uint16_t fac = (res_new / res);
+					
-					cs.axis_steps_per_unit[axis] *= fac;
+					st_synchronize();
-					position[E_AXIS] *= fac;
+					uint16_t res = tmc2130_get_res(i);
-				}
+					tmc2130_set_res(i, res_new);
-				else
+					cs.axis_ustep_resolution[i] = res_new;
-				{
+					if (res_new > res)
-					uint16_t fac = (res / res_new);
+					{
-					cs.axis_steps_per_unit[axis] /= fac;
+						uint16_t fac = (res_new / res);
-					position[E_AXIS] /= fac;
+						cs.axis_steps_per_unit[i] *= fac;
+						position[i] *= fac;
+					}
+					else
+					{
+						uint16_t fac = (res / res_new);
+						cs.axis_steps_per_unit[i] /= fac;
+						position[i] /= fac;
+					}
 				}
 			}
 		}
@@ -8219,7 +8285,7 @@ void get_coordinates()
   for(int8_t i=0; i < NUM_AXIS; i++) {
     if(code_seen(axis_codes[i]))
     {
-      bool relative = axis_relative_modes[i] || relative_mode;
+      bool relative = axis_relative_modes[i];
       destination[i] = (float)code_value();
       if (i == E_AXIS) {
         float emult = extruder_multiplier[active_extruder];
@@ -8302,38 +8368,43 @@ void clamp_to_software_endstops(float target[3])
 }
 
 #ifdef MESH_BED_LEVELING
-    void mesh_plan_buffer_line(const float &x, const float &y, const float &z, const float &e, const float &feed_rate, const uint8_t extruder) {
+void mesh_plan_buffer_line(const float &x, const float &y, const float &z, const float &e, const float &feed_rate, const uint8_t extruder) {
         float dx = x - current_position[X_AXIS];
         float dy = y - current_position[Y_AXIS];
-        float dz = z - current_position[Z_AXIS];
         int n_segments = 0;
-		
+
         if (mbl.active) {
             float len = abs(dx) + abs(dy);
             if (len > 0)
                 // Split to 3cm segments or shorter.
                 n_segments = int(ceil(len / 30.f));
         }
-        
+
         if (n_segments > 1) {
+            // In a multi-segment move explicitly set the final target in the plan
+            // as the move will be recalculated in it's entirety
+            float gcode_target[NUM_AXIS];
+            gcode_target[X_AXIS] = x;
+            gcode_target[Y_AXIS] = y;
+            gcode_target[Z_AXIS] = z;
+            gcode_target[E_AXIS] = e;
+
+            float dz = z - current_position[Z_AXIS];
             float de = e - current_position[E_AXIS];
+
             for (int i = 1; i < n_segments; ++ i) {
                 float t = float(i) / float(n_segments);
-                if (saved_printing || (mbl.active == false)) return;
+                plan_buffer_line(current_position[X_AXIS] + t * dx,
-                plan_buffer_line(
-                                 current_position[X_AXIS] + t * dx,
                                  current_position[Y_AXIS] + t * dy,
                                  current_position[Z_AXIS] + t * dz,
                                  current_position[E_AXIS] + t * de,
-                                 feed_rate, extruder);
+                                 feed_rate, extruder, gcode_target);
+                if (waiting_inside_plan_buffer_line_print_aborted)
+                    return;
             }
         }
         // The rest of the path.
         plan_buffer_line(x, y, z, e, feed_rate, extruder);
-        current_position[X_AXIS] = x;
-        current_position[Y_AXIS] = y;
-        current_position[Z_AXIS] = z;
-        current_position[E_AXIS] = e;
     }
 #endif  // MESH_BED_LEVELING
     
@@ -8354,9 +8425,7 @@ void prepare_move()
 #endif
   }
 
-  for(int8_t i=0; i < NUM_AXIS; i++) {
+  set_current_to_destination();
-    current_position[i] = destination[i];
-  }
 }
 
 void prepare_arc_move(char isclockwise) {
@@ -8564,7 +8633,7 @@ if(0)
 
   if( (_millis() - previous_millis_cmd) >  max_inactive_time )
     if(max_inactive_time)
-      kill(_n(""), 4);
+      kill(_n("Inactivity Shutdown"), 4);
   if(stepper_inactive_time)  {
     if( (_millis() - previous_millis_cmd) >  stepper_inactive_time )
     {
@@ -8605,7 +8674,7 @@ if(0)
     // ----------------------------------------------------------------
     if ( killCount >= KILL_DELAY)
     {
-       kill("", 5);
+       kill(NULL, 5);
     }
   #endif
     
@@ -8683,6 +8752,16 @@ void kill(const char *full_screen_message, unsigned char id)
   } // Wait for reset
 }
 
+// Stop: Emergency stop used by overtemp functions which allows recovery
+//
+//   In addition to stopping the print, this prevents subsequent G[0-3] commands to be
+//   processed via USB (using "Stopped") until the print is resumed via M999 or
+//   manually started from scratch with the LCD.
+//
+//   Note that the current instruction is completely discarded, so resuming from Stop()
+//   will introduce either over/under extrusion on the current segment, and will not
+//   survive a power panic. Switching Stop() to use the pause machinery instead (with
+//   the addition of disabling the headers) could allow true recovery in the future.
 void Stop()
 {
   disable_heater();
@@ -8867,6 +8946,8 @@ void delay_keep_alive(unsigned int ms)
 }
 
 static void wait_for_heater(long codenum, uint8_t extruder) {
+    if (!degTargetHotend(extruder))
+        return;
 
 #ifdef TEMP_RESIDENCY_TIME
 	long residencyStart;
@@ -9075,10 +9156,8 @@ void bed_check(float x_dimension, float y_dimension, int x_points_num, int y_poi
 		destination[X_AXIS] = ix * (x_dimension / (x_points_num - 1)) + shift_x;
 		destination[Y_AXIS] = iy * (y_dimension / (y_points_num - 1)) + shift_y;
 
-		mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], XY_AXIS_FEEDRATE/6, active_extruder);
+        mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], XY_AXIS_FEEDRATE/6, active_extruder);
-		for(int8_t i=0; i < NUM_AXIS; i++) {
+        set_current_to_destination();
-			current_position[i] = destination[i];
-		}
 		st_synchronize();
 
 	//	printf_P(PSTR("X = %f; Y= %f \n"), current_position[X_AXIS], current_position[Y_AXIS]);
@@ -9493,9 +9572,11 @@ float temp_compensation_pinda_thermistor_offset(float temperature_pinda)
 void long_pause() //long pause print
 {
 	st_synchronize();
-	
 	start_pause_print = _millis();
 
+    // Stop heaters
+    setAllTargetHotends(0);
+
 	//retract
 	current_position[E_AXIS] -= default_retraction;
 	plan_buffer_line_curposXYZE(400, active_extruder);
@@ -9512,8 +9593,6 @@ void long_pause() //long pause print
 
 	// Turn off the print fan
 	fanSpeed = 0;
-
-	st_synchronize();
 }
 
 void serialecho_temperatures() {
@@ -9534,6 +9613,11 @@ void uvlo_()
 	unsigned long time_start = _millis();
 	bool sd_print = card.sdprinting;
     // Conserve power as soon as possible.
+#ifdef LCD_BL_PIN
+    backlightMode = BACKLIGHT_MODE_DIM;
+    backlightLevel_LOW = 0;
+    backlight_update();
+#endif //LCD_BL_PIN
     disable_x();
     disable_y();
     
@@ -9565,8 +9649,18 @@ void uvlo_()
       if (sd_position < 0) sd_position = 0;
     }
 
-    // Backup the feedrate in mm/min.
+    // save the global state at planning time
-    int feedrate_bckp = blocks_queued() ? (block_buffer[block_buffer_tail].nominal_speed * 60.f) : feedrate;
+    uint16_t feedrate_bckp;
+    if (blocks_queued())
+    {
+        memcpy(saved_target, current_block->gcode_target, sizeof(saved_target));
+        feedrate_bckp = current_block->gcode_feedrate;
+    }
+    else
+    {
+        saved_target[0] = SAVED_TARGET_UNSET;
+        feedrate_bckp = feedrate;
+    }
 
     // After this call, the planner queue is emptied and the current_position is set to a current logical coordinate.
     // The logical coordinate will likely differ from the machine coordinate if the skew calibration and mesh bed leveling
@@ -9633,7 +9727,8 @@ void uvlo_()
     eeprom_update_float((float*)(EEPROM_UVLO_CURRENT_POSITION + 4), current_position[Y_AXIS]);
     eeprom_update_float((float*)EEPROM_UVLO_CURRENT_POSITION_Z , current_position[Z_AXIS]);
     // Store the current feed rate, temperatures, fan speed and extruder multipliers (flow rates)
-    EEPROM_save_B(EEPROM_UVLO_FEEDRATE, &feedrate_bckp);
+	eeprom_update_word((uint16_t*)EEPROM_UVLO_FEEDRATE, feedrate_bckp);
+    EEPROM_save_B(EEPROM_UVLO_FEEDMULTIPLY, &feedmultiply);
     eeprom_update_byte((uint8_t*)EEPROM_UVLO_TARGET_HOTEND, target_temperature[active_extruder]);
     eeprom_update_byte((uint8_t*)EEPROM_UVLO_TARGET_BED, target_temperature_bed);
     eeprom_update_byte((uint8_t*)EEPROM_UVLO_FAN_SPEED, fanSpeed);
@@ -9645,6 +9740,11 @@ void uvlo_()
 #endif
 #endif
 	eeprom_update_word((uint16_t*)(EEPROM_EXTRUDEMULTIPLY), (uint16_t)extrudemultiply);
+    // Store the saved target
+    eeprom_update_float((float*)(EEPROM_UVLO_SAVED_TARGET+0*4), saved_target[X_AXIS]);
+    eeprom_update_float((float*)(EEPROM_UVLO_SAVED_TARGET+1*4), saved_target[Y_AXIS]);
+    eeprom_update_float((float*)(EEPROM_UVLO_SAVED_TARGET+2*4), saved_target[Z_AXIS]);
+    eeprom_update_float((float*)(EEPROM_UVLO_SAVED_TARGET+3*4), saved_target[E_AXIS]);
 
     // Finaly store the "power outage" flag.
 	if(sd_print) eeprom_update_byte((uint8_t*)EEPROM_UVLO, 1);
@@ -9893,10 +9993,17 @@ void recover_machine_state_after_power_panic(bool bTiny)
 #endif
 #endif
   extrudemultiply = (int)eeprom_read_word((uint16_t*)(EEPROM_EXTRUDEMULTIPLY));
+
+  // 9) Recover the saved target
+  saved_target[X_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_SAVED_TARGET+0*4));
+  saved_target[Y_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_SAVED_TARGET+1*4));
+  saved_target[Z_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_SAVED_TARGET+2*4));
+  saved_target[E_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_SAVED_TARGET+3*4));
 }
 
 void restore_print_from_eeprom() {
 	int feedrate_rec;
+	int feedmultiply_rec;
 	uint8_t fan_speed_rec;
 	char cmd[30];
 	char filename[13];
@@ -9904,9 +10011,12 @@ void restore_print_from_eeprom() {
 	char dir_name[9];
 
 	fan_speed_rec = eeprom_read_byte((uint8_t*)EEPROM_UVLO_FAN_SPEED);
-	EEPROM_read_B(EEPROM_UVLO_FEEDRATE, &feedrate_rec);
+    feedrate_rec = eeprom_read_word((uint16_t*)EEPROM_UVLO_FEEDRATE);
+	EEPROM_read_B(EEPROM_UVLO_FEEDMULTIPLY, &feedmultiply_rec);
 	SERIAL_ECHOPGM("Feedrate:");
-	MYSERIAL.println(feedrate_rec);
+	MYSERIAL.print(feedrate_rec);
+	SERIAL_ECHOPGM(", feedmultiply:");
+	MYSERIAL.println(feedmultiply_rec);
 
 	depth = eeprom_read_byte((uint8_t*)EEPROM_DIR_DEPTH);
 	
@@ -9947,9 +10057,11 @@ void restore_print_from_eeprom() {
 	enquecommand(cmd);
   // Unretract.
 	enquecommand_P(PSTR("G1 E"  STRINGIFY(2*default_retraction)" F480"));
-  // Set the feedrate saved at the power panic.
+  // Set the feedrates saved at the power panic.
 	sprintf_P(cmd, PSTR("G1 F%d"), feedrate_rec);
 	enquecommand(cmd);
+	sprintf_P(cmd, PSTR("M220 S%d"), feedmultiply_rec);
+	enquecommand(cmd);
 	if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_E_ABS))
 	{
 	  enquecommand_P(PSTR("M82")); //E axis abslute mode
@@ -10101,16 +10213,21 @@ void stop_and_save_print_to_ram(float z_move, float e_move)
   }
 #endif
 
-#if 0
+  // save the global state at planning time
-  saved_feedrate2 = feedrate; //save feedrate
+  if (blocks_queued())
-#else
+  {
-  // Try to deduce the feedrate from the first block of the planner.
+      memcpy(saved_target, current_block->gcode_target, sizeof(saved_target));
-  // Speed is in mm/min.
+      saved_feedrate2 = current_block->gcode_feedrate;
-  saved_feedrate2 = blocks_queued() ? (block_buffer[block_buffer_tail].nominal_speed * 60.f) : feedrate;
+  }
-#endif
+  else
+  {
+      saved_target[0] = SAVED_TARGET_UNSET;
+      saved_feedrate2 = feedrate;
+  }
 
 	planner_abort_hard(); //abort printing
 	memcpy(saved_pos, current_position, sizeof(saved_pos));
+    saved_feedmultiply2 = feedmultiply; //save feedmultiply
 	saved_active_extruder = active_extruder; //save active_extruder
 	saved_extruder_temperature = degTargetHotend(active_extruder);
 
@@ -10126,7 +10243,9 @@ void stop_and_save_print_to_ram(float z_move, float e_move)
 	sei();
 	if ((z_move != 0) || (e_move != 0)) { // extruder or z move
 #if 1
-    // Rather than calling plan_buffer_line directly, push the move into the command queue, 
+    // Rather than calling plan_buffer_line directly, push the move into the command queue so that
+    // the caller can continue processing. This is used during powerpanic to save the state as we
+    // move away from the print.
     char buf[48];
 
 	// First unretract (relative extrusion)
@@ -10155,6 +10274,7 @@ void stop_and_save_print_to_ram(float z_move, float e_move)
     memcpy(current_position, saved_pos, sizeof(saved_pos));
     memcpy(destination, current_position, sizeof(destination));
 #endif
+    waiting_inside_plan_buffer_line_print_aborted = true; //unroll the stack
   }
 }
 
@@ -10188,7 +10308,6 @@ void restore_print_from_ram_and_continue(float e_move)
 		wait_for_heater(_millis(), saved_active_extruder);
 		heating_status = 2;
 	}
-	feedrate = saved_feedrate2; //restore feedrate
 	axis_relative_modes[E_AXIS] = saved_extruder_relative_mode;
 	float e = saved_pos[E_AXIS] - e_move;
 	plan_set_e_position(e);
@@ -10211,6 +10330,10 @@ void restore_print_from_ram_and_continue(float e_move)
     fans_check_enabled = true;
   #endif
 
+    // restore original feedrate/feedmultiply _after_ restoring the extruder position
+	feedrate = saved_feedrate2;
+	feedmultiply = saved_feedmultiply2;
+
 	memcpy(current_position, saved_pos, sizeof(saved_pos));
 	memcpy(destination, current_position, sizeof(destination));
 	if (saved_printing_type == PRINTING_TYPE_SD) { //was sd printing
@@ -10226,10 +10349,20 @@ void restore_print_from_ram_and_continue(float e_move)
 	else {
 		//not sd printing nor usb printing
 	}
+
 	SERIAL_PROTOCOLLNRPGM(MSG_OK); //dummy response because of octoprint is waiting for this
 	lcd_setstatuspgm(_T(WELCOME_MSG));
     saved_printing_type = PRINTING_TYPE_NONE;
 	saved_printing = false;
+    waiting_inside_plan_buffer_line_print_aborted = true; //unroll the stack
+}
+
+// Cancel the state related to a currently saved print
+void cancel_saved_printing()
+{
+    saved_target[0] = SAVED_TARGET_UNSET;
+    saved_printing_type = PRINTING_TYPE_NONE;
+    saved_printing = false;
 }
 
 void print_world_coordinates()

Firmware/Sd2Card.cpp

@@ -319,6 +319,22 @@ bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
       goto fail;
     }
   }
+
+  // send 0xFF until 0xFF received to give card some clock cycles
+  t0 = (uint16_t)_millis();
+  SERIAL_ECHOLNRPGM(PSTR("Sending 0xFF"));
+  spiSend(0XFF);
+  while ((status_ = spiRec()) != 0xFF)
+  {
+    spiSend(0XFF);
+    if (((uint16_t)_millis() - t0) > SD_CARD_ERROR_FF_TIMEOUT)
+    {
+      error(SD_CARD_ERROR_CMD8);
+      SERIAL_ECHOLNRPGM(PSTR("No 0xFF received"));
+      goto fail;
+    }
+  }
+
   // check SD version
   if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) {
     type(SD_CARD_TYPE_SD1);

Firmware/Sd2Card.h

@@ -105,6 +105,8 @@ uint8_t const SD_CARD_ERROR_SCK_RATE = 0X18;
 uint8_t const SD_CARD_ERROR_INIT_NOT_CALLED = 0X19;
 /** crc check error */
 uint8_t const SD_CARD_ERROR_CRC = 0X20;
+/** no response to sent 0xFF */
+uint8_t const SD_CARD_ERROR_FF_TIMEOUT = 0X21;
 
 /** Toshiba FlashAir: iSDIO */
 uint8_t const SD_CARD_ERROR_CMD48 = 0x80;

Firmware/adc.c

@@ -4,6 +4,7 @@
 #include <stdio.h>
 #include <avr/io.h>
 #include <avr/pgmspace.h>
+#include "pins.h"
 
 uint8_t adc_state;
 uint8_t adc_count;
@@ -24,8 +25,8 @@ void adc_init(void)
 	ADMUX |= (1 << REFS0);
 	ADCSRA |= (1 << ADEN);
 //	ADCSRA |= (1 << ADIF) | (1 << ADSC);
-	DIDR0 = (ADC_CHAN_MSK & 0xff);
+	DIDR0 = ((ADC_CHAN_MSK & ADC_DIDR_MSK) & 0xff);
-	DIDR2 = (ADC_CHAN_MSK >> 8);
+	DIDR2 = ((ADC_CHAN_MSK & ADC_DIDR_MSK) >> 8);
 	adc_reset();
 //	adc_sim_mask = 0b0101;
 //	adc_sim_mask = 0b100101;

Firmware/backlight.cpp

@@ -0,0 +1,120 @@
+//backlight.cpp
+
+#include "backlight.h"
+#include <avr/eeprom.h>
+#include <Arduino.h>
+#include "eeprom.h"
+#include "Marlin.h"
+#include "pins.h"
+#include "fastio.h"
+#include "Timer.h"
+
+#ifdef LCD_BL_PIN
+
+#define BL_FLASH_DELAY_MS 25
+
+bool backlightSupport = 0; //only if it's true will any of the settings be visible to the user
+int16_t backlightLevel_HIGH = 0;
+int16_t backlightLevel_LOW = 0;
+uint8_t backlightMode = BACKLIGHT_MODE_BRIGHT;
+int16_t backlightTimer_period = 10;
+LongTimer backlightTimer;
+
+static void backlightTimer_reset() //used for resetting the timer and waking the display. Triggered on user interactions.
+{
+    if (!backlightSupport) return;
+    backlightTimer.start();
+    backlight_update();
+}
+
+void force_bl_on(bool section_start)
+{
+    if (section_start)
+    {
+        backlightMode = BACKLIGHT_MODE_BRIGHT;
+        if (backlightLevel_HIGH < 30) backlightLevel_HIGH = 30;
+    }
+    else
+    {
+        backlightMode = eeprom_read_byte((uint8_t *)EEPROM_BACKLIGHT_MODE);
+        backlightLevel_HIGH = eeprom_read_byte((uint8_t *)EEPROM_BACKLIGHT_LEVEL_HIGH);
+    }
+    backlight_update();
+}
+
+void backlight_wake(const uint8_t flashNo)
+{
+    if (!backlightSupport) return;
+    
+    if (flashNo)
+    {
+        uint8_t backlightMode_bck = backlightMode;
+        for (uint8_t i = 0; i < (((backlightMode_bck == BACKLIGHT_MODE_AUTO) && !backlightTimer.running()) + (flashNo * 2)); i++)
+        {
+            backlightMode = !backlightMode; //toggles between BACKLIGHT_MODE_BRIGHT and BACKLIGHT_MODE_DIM
+            backlight_update();
+            _delay(BL_FLASH_DELAY_MS);
+        }
+        backlightMode = backlightMode_bck;
+    }
+    backlightTimer_reset();
+}
+
+void backlight_save() //saves all backlight data to eeprom.
+{
+    eeprom_update_byte((uint8_t *)EEPROM_BACKLIGHT_LEVEL_HIGH, (uint8_t)backlightLevel_HIGH);
+    eeprom_update_byte((uint8_t *)EEPROM_BACKLIGHT_LEVEL_LOW, (uint8_t)backlightLevel_LOW);
+    eeprom_update_byte((uint8_t *)EEPROM_BACKLIGHT_MODE, backlightMode);
+    eeprom_update_word((uint16_t *)EEPROM_BACKLIGHT_TIMEOUT, backlightTimer_period);
+}
+
+void backlight_update()
+{
+    if (!backlightSupport) return;
+    
+    if (backlightMode == BACKLIGHT_MODE_AUTO)
+    {
+        if (backlightTimer.expired((uint32_t)backlightTimer_period * 1000ul)) analogWrite(LCD_BL_PIN, backlightLevel_LOW);
+        else if (backlightTimer.running()) analogWrite(LCD_BL_PIN, backlightLevel_HIGH);
+        else {/*do nothing*/;} //display is dimmed.
+    }
+    else if (backlightMode == BACKLIGHT_MODE_DIM) analogWrite(LCD_BL_PIN, backlightLevel_LOW);
+    else analogWrite(LCD_BL_PIN, backlightLevel_HIGH);
+}
+
+void backlight_init()
+{
+//check for backlight support on lcd
+    SET_INPUT(LCD_BL_PIN);
+    WRITE(LCD_BL_PIN,HIGH);
+    _delay(10);
+    backlightSupport = !READ(LCD_BL_PIN);
+    if (!backlightSupport) return;
+
+//initialize backlight
+    backlightMode = eeprom_read_byte((uint8_t *)EEPROM_BACKLIGHT_MODE);
+    if (backlightMode == 0xFF) //set default values
+    {
+        backlightMode = BACKLIGHT_MODE_AUTO;
+        backlightLevel_HIGH = 130;
+        backlightLevel_LOW = 50;
+        backlightTimer_period = 10; //in seconds
+        backlight_save();
+    }
+    backlightLevel_HIGH = eeprom_read_byte((uint8_t *)EEPROM_BACKLIGHT_LEVEL_HIGH);
+    backlightLevel_LOW = eeprom_read_byte((uint8_t *)EEPROM_BACKLIGHT_LEVEL_LOW);
+    backlightTimer_period = eeprom_read_word((uint16_t *)EEPROM_BACKLIGHT_TIMEOUT);
+    
+    SET_OUTPUT(LCD_BL_PIN);
+    backlightTimer_reset();
+}
+
+#else //LCD_BL_PIN
+
+void force_bl_on(__attribute__((unused)) bool section_start) {}
+void backlight_update() {}
+void backlight_init() {}
+void backlight_save() {}
+void backlight_wake(__attribute__((unused)) const uint8_t flashNo) {}
+
+#endif //LCD_BL_PIN

Firmware/backlight.h

@@ -0,0 +1,32 @@
+//backlight.h
+#ifndef _BACKLIGHT_H
+#define _BACKLIGHT_H
+
+#include <inttypes.h>
+#include "Marlin.h"
+#include "pins.h"
+
+enum Backlight_Mode
+{
+	BACKLIGHT_MODE_DIM     = 0,
+	BACKLIGHT_MODE_BRIGHT  = 1,
+	BACKLIGHT_MODE_AUTO    = 2,
+};
+
+extern int16_t backlightLevel_HIGH;
+extern int16_t backlightLevel_LOW;
+extern uint8_t backlightMode;
+extern bool backlightSupport;
+extern int16_t backlightTimer_period;
+
+#define FORCE_BL_ON_START force_bl_on(true)
+#define FORCE_BL_ON_END force_bl_on(false)
+
+extern void force_bl_on(bool section_start);
+extern void backlight_update();
+extern void backlight_init();
+extern void backlight_save();
+extern void backlight_wake(const uint8_t flashNo = 0);
+
+
+#endif //_BACKLIGHT_H

Firmware/cardreader.cpp

@@ -25,7 +25,6 @@ CardReader::CardReader()
    sdpos = 0;
    sdprinting = false;
    cardOK = false;
-   paused = false;
    saving = false;
    logging = false;
    autostart_atmillis=0;
@@ -137,8 +136,8 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
 						SERIAL_ECHOPGM("Access date: ");
 						MYSERIAL.println(p.lastAccessDate);
 						SERIAL_ECHOLNPGM("");*/
-						creationDate = p.creationDate;
+						modificationDate = p.lastWriteDate;
-						creationTime = p.creationTime;
+						modificationTime = p.lastWriteTime;
 						//writeDate = p.lastAccessDate;
 						if (match != NULL) {
 							if (strcasecmp(match, filename) == 0) return;
@@ -242,24 +241,13 @@ void CardReader::startFileprint()
   if(cardOK)
   {
     sdprinting = true;
-	paused = false;
+    Stopped = false;
-     Stopped = false;
 	#ifdef SDCARD_SORT_ALPHA
 		//flush_presort();
 	#endif
   }
 }
 
-void CardReader::pauseSDPrint()
-{
-  if(sdprinting)
-  {
-    sdprinting = false;
-	paused = true;
-  }
-}
-
-
 void CardReader::openLogFile(const char* name)
 {
   logging = true;
@@ -371,10 +359,10 @@ void CardReader::openFile(const char* name,bool read, bool replace_current/*=tru
     {
      if((int)file_subcall_ctr>(int)SD_PROCEDURE_DEPTH-1)
      {
-       SERIAL_ERROR_START;
+       // SERIAL_ERROR_START;
-       SERIAL_ERRORPGM("trying to call sub-gcode files with too many levels. MAX level is:");
+       // SERIAL_ERRORPGM("trying to call sub-gcode files with too many levels. MAX level is:");
-       SERIAL_ERRORLN(SD_PROCEDURE_DEPTH);
+       // SERIAL_ERRORLN(SD_PROCEDURE_DEPTH);
-       kill("", 1);
+       kill(_n("trying to call sub-gcode files with too many levels."), 1);
        return;
      }
      
@@ -408,9 +396,7 @@ void CardReader::openFile(const char* name,bool read, bool replace_current/*=tru
     SERIAL_ECHOLN(name);
   }
   sdprinting = false;
-  paused = false;
+
-  
- 
   SdFile myDir;
   const char *fname=name;
   diveSubfolder(fname,myDir);
@@ -492,24 +478,27 @@ uint32_t CardReader::getFileSize()
 
 void CardReader::getStatus()
 {
-  if(sdprinting){
+  if(sdprinting)
-    SERIAL_PROTOCOL(longFilename);
+  {
-    SERIAL_PROTOCOLPGM("\n");
+      if (isPrintPaused) {
-    SERIAL_PROTOCOLRPGM(_N("SD printing byte "));////MSG_SD_PRINTING_BYTE
+          SERIAL_PROTOCOLLNPGM("SD print paused");
-    SERIAL_PROTOCOL(sdpos);
+      }
-    SERIAL_PROTOCOLPGM("/");
+      else if (saved_printing) {
-    SERIAL_PROTOCOLLN(filesize);
+          SERIAL_PROTOCOLLNPGM("Print saved");
-    uint16_t time = _millis()/60000 - starttime/60000;
+      }
-    SERIAL_PROTOCOL(itostr2(time/60));
+      else {
-    SERIAL_PROTOCOL(':');
+          SERIAL_PROTOCOL(longFilename);
-    SERIAL_PROTOCOL(itostr2(time%60));
+          SERIAL_PROTOCOLPGM("\n");
-    SERIAL_PROTOCOLPGM("\n");
+          SERIAL_PROTOCOLRPGM(_N("SD printing byte "));////MSG_SD_PRINTING_BYTE
-  }
+          SERIAL_PROTOCOL(sdpos);
-  else if (paused) {
+          SERIAL_PROTOCOLPGM("/");
-	SERIAL_PROTOCOLLNPGM("SD print paused");
+          SERIAL_PROTOCOLLN(filesize);
-  }
+          uint16_t time = _millis()/60000 - starttime/60000;
-  else if (saved_printing) {
+          SERIAL_PROTOCOL(itostr2(time/60));
-	SERIAL_PROTOCOLLNPGM("Print saved");
+          SERIAL_PROTOCOL(':');
+          SERIAL_PROTOCOL(itostr2(time%60));
+          SERIAL_PROTOCOLPGM("\n");
+      }
   }
   else {
     SERIAL_PROTOCOLLNPGM("Not SD printing");
@@ -763,8 +752,8 @@ void CardReader::presort() {
 		#endif
 		#elif SDSORT_USES_STACK
 		char sortnames[fileCnt][LONG_FILENAME_LENGTH];
-		uint16_t creation_time[fileCnt];
+		uint16_t modification_time[fileCnt];
-		uint16_t creation_date[fileCnt];
+		uint16_t modification_date[fileCnt];
 		#endif
 
 		// Folder sorting needs 1 bit per entry for flags.
@@ -784,8 +773,8 @@ void CardReader::presort() {
 		// retaining only two filenames at a time. This is very
 		// slow but is safest and uses minimal RAM.
 		char name1[LONG_FILENAME_LENGTH + 1];
-		uint16_t creation_time_bckp;
+		uint16_t modification_time_bckp;
-		uint16_t creation_date_bckp;
+		uint16_t modification_date_bckp;
 
 		#endif
 		position = 0;
@@ -811,8 +800,8 @@ void CardReader::presort() {
 				#else
 				// Copy filenames into the static array
 				strcpy(sortnames[i], LONGEST_FILENAME);
-				creation_time[i] = creationTime;
+				modification_time[i] = modificationTime;
-				creation_date[i] = creationDate;
+				modification_date[i] = modificationDate;
 				#if SDSORT_CACHE_NAMES
 				strcpy(sortshort[i], filename);
 				#endif
@@ -837,12 +826,12 @@ void CardReader::presort() {
 			// Compare names from the array or just the two buffered names
 			#if SDSORT_USES_RAM
 			#define _SORT_CMP_NODIR() (strcasecmp(sortnames[o1], sortnames[o2]) > 0)
-			#define _SORT_CMP_TIME_NODIR() (((creation_date[o1] == creation_date[o2]) && (creation_time[o1] < creation_time[o2])) || \
+			#define _SORT_CMP_TIME_NODIR() (((modification_date[o1] == modification_date[o2]) && (modification_time[o1] < modification_time[o2])) || \
-																	(creation_date[o1] < creation_date [o2]))
+																	(modification_date[o1] < modification_date [o2]))
 			#else
 			#define _SORT_CMP_NODIR() (strcasecmp(name1, name2) > 0) //true if lowercase(name1) > lowercase(name2)
-			#define _SORT_CMP_TIME_NODIR() (((creation_date_bckp == creationDate) && (creation_time_bckp > creationTime)) || \
+			#define _SORT_CMP_TIME_NODIR() (((modification_date_bckp == modificationDate) && (modification_time_bckp > modificationTime)) || \
-																	(creation_date_bckp > creationDate))
+																	(modification_date_bckp > modificationDate))
 
 			#endif
 
@@ -893,8 +882,8 @@ void CardReader::presort() {
 					counter++;
 					getfilename_simple(positions[o1]);
 					strcpy(name1, LONGEST_FILENAME); // save (or getfilename below will trounce it)
-					creation_date_bckp = creationDate;
+					modification_date_bckp = modificationDate;
-					creation_time_bckp = creationTime;
+					modification_time_bckp = modificationTime;
 					#if HAS_FOLDER_SORTING
 					bool dir1 = filenameIsDir;
 					#endif

Firmware/cardreader.h

@@ -25,7 +25,6 @@ public:
   void closefile(bool store_location=false);
   void release();
   void startFileprint();
-  void pauseSDPrint();
   uint32_t getFileSize();
   void getStatus();
   void printingHasFinished();
@@ -75,9 +74,8 @@ public:
   bool logging;
   bool sdprinting ;  
   bool cardOK ;
-  bool paused ;
   char filename[13];
-  uint16_t creationTime, creationDate;
+  uint16_t modificationTime, modificationDate;
   uint32_t cluster, position;
   char longFilename[LONG_FILENAME_LENGTH];
   bool filenameIsDir;
@@ -114,8 +112,8 @@ private:
     #endif
   #elif !SDSORT_USES_STACK
     char sortnames[SDSORT_LIMIT][FILENAME_LENGTH];
-    uint16_t creation_time[SDSORT_LIMIT];
+    uint16_t modification_time[SDSORT_LIMIT];
-    uint16_t creation_date[SDSORT_LIMIT];
+    uint16_t modification_date[SDSORT_LIMIT];
   #endif
 
   // Folder sorting uses an isDir array when caching items.

Firmware/cmdqueue.cpp

@@ -500,7 +500,7 @@ void get_command()
 
         //If command was e-stop process now
         if(strcmp(cmdbuffer+bufindw+CMDHDRSIZE, "M112") == 0)
-          kill("", 2);
+          kill(MSG_M112_KILL, 2);
         
         // Store the current line into buffer, move to the next line.
 		// Store type of entry
@@ -582,30 +582,8 @@ void get_command()
        ((serial_char == '#' || serial_char == ':') && comment_mode == false) ||
        serial_count >= (MAX_CMD_SIZE - 1) || n==-1)
     {
-      if(card.eof()){
+      if(card.eof()) break;
-        SERIAL_PROTOCOLLNRPGM(_n("Done printing file"));////MSG_FILE_PRINTED
-        stoptime=_millis();
-        char time[30];
-        unsigned long t=(stoptime-starttime-pause_time)/1000;
-        pause_time = 0;
-        int hours, minutes;
-        minutes=(t/60)%60;
-        hours=t/60/60;
-        save_statistics(total_filament_used, t);
-        sprintf_P(time, PSTR("%i hours %i minutes"),hours, minutes);
-        SERIAL_ECHO_START;
-        SERIAL_ECHOLN(time);
-        lcd_setstatus(time);
-        card.printingHasFinished();
-        card.checkautostart(true);
 
-        if (farm_mode)
-        {
-            prusa_statistics(6);
-            lcd_commands_type = LcdCommands::FarmModeConfirm;
-        }
-
-      }
       if(serial_char=='#')
         stop_buffering=true;
 
@@ -663,6 +641,37 @@ void get_command()
       else if(!comment_mode) cmdbuffer[bufindw+CMDHDRSIZE+serial_count++] = serial_char;
     }
   }
+  if(card.eof())
+  {
+      // file was fully buffered, but commands might still need to be planned!
+      // do *not* clear sdprinting until all SD commands are consumed to ensure
+      // SD state can be resumed from a saved printing state. sdprinting is only
+      // cleared by printingHasFinished after peforming all remaining moves.
+      if(!cmdqueue_calc_sd_length())
+      {
+          SERIAL_PROTOCOLLNRPGM(_n("Done printing file"));////MSG_FILE_PRINTED
+          stoptime=_millis();
+          char time[30];
+          unsigned long t=(stoptime-starttime-pause_time)/1000;
+          pause_time = 0;
+          int hours, minutes;
+          minutes=(t/60)%60;
+          hours=t/60/60;
+          save_statistics(total_filament_used, t);
+          sprintf_P(time, PSTR("%i hours %i minutes"),hours, minutes);
+          SERIAL_ECHO_START;
+          SERIAL_ECHOLN(time);
+          lcd_setstatus(time);
+          card.printingHasFinished();
+          card.checkautostart(true);
+
+          if (farm_mode)
+          {
+              prusa_statistics(6);
+              lcd_commands_type = LcdCommands::FarmModeConfirm;
+          }
+      }
+  }
 
   #endif //SDSUPPORT
 }

Firmware/config.h

@@ -2,9 +2,21 @@
 #define _CONFIG_H
 
 
+#include "Configuration_prusa.h"
+#include "pins.h"
+
+#define IR_SENSOR_ANALOG (defined(VOLT_IR_PIN) && defined(IR_SENSOR))
+
 //ADC configuration
+#if !IR_SENSOR_ANALOG
 #define ADC_CHAN_MSK      0b0000001001011111 //used AD channels bit mask (0,1,2,3,4,6,9)
+#define ADC_DIDR_MSK      0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
 #define ADC_CHAN_CNT      7         //number of used channels)
+#else //!IR_SENSOR_ANALOG
+#define ADC_CHAN_MSK      0b0000001101011111 //used AD channels bit mask (0,1,2,3,4,6,8,9)
+#define ADC_DIDR_MSK      0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
+#define ADC_CHAN_CNT      8         //number of used channels)
+#endif //!IR_SENSOR_ANALOG
 #define ADC_OVRSAMPL      16        //oversampling multiplier
 #define ADC_CALLBACK      adc_ready //callback function ()
 
@@ -42,11 +54,8 @@
 #define W25X20CL_SPCR          SPI_SPCR(W25X20CL_SPI_RATE, 1, 1, 1, 0)
 #define W25X20CL_SPSR          SPI_SPSR(W25X20CL_SPI_RATE)
 
-#include "boards.h"
-#include "Configuration_prusa.h"
-
 //LANG - Multi-language support
-//#define LANG_MODE              0 // primary language only
+//define LANG_MODE              0 // primary language only
 #define LANG_MODE              1 // sec. language support
 
 #define LANG_SIZE_RESERVED     0x3000 // reserved space for secondary language (12288 bytes)

Firmware/eeprom.h

@@ -74,7 +74,7 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
 #define EEPROM_UVLO_CURRENT_POSITION_Z	(EEPROM_FILE_POSITION - 4) //float for current position in Z
 #define EEPROM_UVLO_TARGET_HOTEND		(EEPROM_UVLO_CURRENT_POSITION_Z - 1)
 #define EEPROM_UVLO_TARGET_BED			(EEPROM_UVLO_TARGET_HOTEND - 1)
-#define EEPROM_UVLO_FEEDRATE			(EEPROM_UVLO_TARGET_BED - 2)
+#define EEPROM_UVLO_FEEDRATE			(EEPROM_UVLO_TARGET_BED - 2) //uint16_t
 #define EEPROM_UVLO_FAN_SPEED			(EEPROM_UVLO_FEEDRATE - 1) 
 #define EEPROM_FAN_CHECK_ENABLED		(EEPROM_UVLO_FAN_SPEED - 1)
 #define EEPROM_UVLO_MESH_BED_LEVELING     (EEPROM_FAN_CHECK_ENABLED - 9*2)
@@ -201,9 +201,20 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
 #define EEPROM_SHEETS_BASE (EEPROM_CHECK_GCODE - EEPROM_SHEETS_SIZEOF) // Sheets
 static Sheets * const EEPROM_Sheets_base = (Sheets*)(EEPROM_SHEETS_BASE);
 
+#define EEPROM_FSENSOR_PCB (EEPROM_SHEETS_BASE-1) // uint8
+#define EEPROM_FSENSOR_ACTION_NA (EEPROM_FSENSOR_PCB-1) // uint8
+
+#define EEPROM_UVLO_SAVED_TARGET (EEPROM_FSENSOR_ACTION_NA - 4*4) // 4 x float for saved target for all axes
+#define EEPROM_UVLO_FEEDMULTIPLY (EEPROM_UVLO_SAVED_TARGET - 2) // uint16_t for feedmultiply
+
+#define EEPROM_BACKLIGHT_LEVEL_HIGH (EEPROM_UVLO_FEEDMULTIPLY-1) // uint8
+#define EEPROM_BACKLIGHT_LEVEL_LOW (EEPROM_BACKLIGHT_LEVEL_HIGH-1) // uint8
+#define EEPROM_BACKLIGHT_MODE (EEPROM_BACKLIGHT_LEVEL_LOW-1) // uint8
+#define EEPROM_BACKLIGHT_TIMEOUT (EEPROM_BACKLIGHT_MODE-2) // uint16
+
 
 //This is supposed to point to last item to allow EEPROM overrun check. Please update when adding new items.
-#define EEPROM_LAST_ITEM EEPROM_SHEETS_BASE
+#define EEPROM_LAST_ITEM EEPROM_BACKLIGHT_TIMEOUT
 // !!!!!
 // !!!!! this is end of EEPROM section ... all updates MUST BE inserted before this mark !!!!!
 // !!!!!

Firmware/fsensor.cpp

@@ -15,6 +15,10 @@
 #include "mmu.h"
 #include "cardreader.h"
 
+#include "adc.h"
+#include "temperature.h"
+#include "config.h"
+
 //! @name Basic parameters
 //! @{
 #define FSENSOR_CHUNK_LEN    0.64F  //!< filament sensor chunk length 0.64mm
@@ -53,15 +57,8 @@ bool fsensor_enabled = true;
 bool fsensor_watch_runout = true;
 //! not responding - is set if any communication error occurred during initialization or readout
 bool fsensor_not_responding = false;
-//! printing saved
-bool fsensor_printing_saved = false;
 //! enable/disable quality meassurement
 bool fsensor_oq_meassure_enabled = false;
-//! as explained in the CHECK_FSENSOR macro: this flag is set to true when fsensor posts
-//! the M600 into the command queue, which elliminates the hazard of having posted multiple M600's
-//! before the first one gets read and started processing.
-//! Btw., the IR fsensor could do up to 6 posts before the command queue managed to start processing the first M600 ;)
-static bool fsensor_m600_enqueued = false;
 
 //! number of errors, updated in ISR
 uint8_t fsensor_err_cnt = 0;
@@ -117,6 +114,13 @@ int16_t fsensor_oq_yd_max;
 uint16_t fsensor_oq_sh_sum;
 //! @}
 
+#if IR_SENSOR_ANALOG
+ClFsensorPCB oFsensorPCB;
+ClFsensorActionNA oFsensorActionNA;
+bool bIRsensorStateFlag=false;
+unsigned long nIRsensorLastTime;
+#endif //IR_SENSOR_ANALOG
+
 void fsensor_stop_and_save_print(void)
 {
     printf_P(PSTR("fsensor_stop_and_save_print\n"));
@@ -126,20 +130,28 @@ void fsensor_stop_and_save_print(void)
 void fsensor_restore_print_and_continue(void)
 {
     printf_P(PSTR("fsensor_restore_print_and_continue\n"));
-	fsensor_watch_runout = true;
 	fsensor_err_cnt = 0;
-	fsensor_m600_enqueued = false;
     restore_print_from_ram_and_continue(0); //XYZ = orig, E - no change
 }
 
+// fsensor_checkpoint_print cuts the current print job at the current position,
+// allowing new instructions to be inserted in the middle
+void fsensor_checkpoint_print(void)
+{
+    printf_P(PSTR("fsensor_checkpoint_print\n"));
+    stop_and_save_print_to_ram(0, 0);
+    restore_print_from_ram_and_continue(0);
+}
+
 void fsensor_init(void)
 {
 #ifdef PAT9125
 	uint8_t pat9125 = pat9125_init();
-    printf_P(PSTR("PAT9125_init:%hhu\n"), pat9125);
+     printf_P(PSTR("PAT9125_init:%hhu\n"), pat9125);
 #endif //PAT9125
 	uint8_t fsensor = eeprom_read_byte((uint8_t*)EEPROM_FSENSOR);
 	fsensor_autoload_enabled=eeprom_read_byte((uint8_t*)EEPROM_FSENS_AUTOLOAD_ENABLED);
+     fsensor_not_responding = false;
 #ifdef PAT9125
 	uint8_t oq_meassure_enabled = eeprom_read_byte((uint8_t*)EEPROM_FSENS_OQ_MEASS_ENABLED);
 	fsensor_oq_meassure_enabled = (oq_meassure_enabled == 1)?true:false;
@@ -150,19 +162,27 @@ void fsensor_init(void)
 		fsensor = 0; //disable sensor
 		fsensor_not_responding = true;
 	}
-	else
-		fsensor_not_responding = false;
 #endif //PAT9125
+#if IR_SENSOR_ANALOG
+     bIRsensorStateFlag=false;
+     oFsensorPCB=(ClFsensorPCB)eeprom_read_byte((uint8_t*)EEPROM_FSENSOR_PCB);
+     oFsensorActionNA=(ClFsensorActionNA)eeprom_read_byte((uint8_t*)EEPROM_FSENSOR_ACTION_NA);
+#endif //IR_SENSOR_ANALOG
 	if (fsensor)
-		fsensor_enable();
+		fsensor_enable(false);                  // (in this case) EEPROM update is not necessary
 	else
-		fsensor_disable();
+		fsensor_disable(false);                 // (in this case) EEPROM update is not necessary
-	printf_P(PSTR("FSensor %S\n"), (fsensor_enabled?PSTR("ENABLED"):PSTR("DISABLED\n")));
+	printf_P(PSTR("FSensor %S"), (fsensor_enabled?PSTR("ENABLED"):PSTR("DISABLED")));
+#if IR_SENSOR_ANALOG
+     printf_P(PSTR(" (sensor board revision: %S)\n"),(oFsensorPCB==ClFsensorPCB::_Rev03b)?PSTR("03b or newer"):PSTR("03 or older"));
+#else //IR_SENSOR_ANALOG
+     printf_P(PSTR("\n"));
+#endif //IR_SENSOR_ANALOG
 	if (check_for_ir_sensor()) ir_sensor_detected = true;
 
 }
 
-bool fsensor_enable(void)
+bool fsensor_enable(bool bUpdateEEPROM)
 {
 #ifdef PAT9125
 	if (mmu_enabled == false) { //filament sensor is pat9125, enable only if it is working
@@ -187,18 +207,34 @@ bool fsensor_enable(void)
 		FSensorStateMenu = 1;
 	}
 #else // PAT9125
-	fsensor_enabled = true;
+#if IR_SENSOR_ANALOG
-	eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, 0x01);
+     if(!fsensor_IR_check())
-	FSensorStateMenu = 1;
+          {
-#endif // PAT9125
+          bUpdateEEPROM=true;
+          fsensor_enabled=false;
+          fsensor_not_responding=true;
+          FSensorStateMenu=0;
+          }
+     else {
+#endif //IR_SENSOR_ANALOG
+     fsensor_enabled=true;
+     fsensor_not_responding=false;
+     FSensorStateMenu=1;
+#if IR_SENSOR_ANALOG
+          }
+#endif //IR_SENSOR_ANALOG
+     if(bUpdateEEPROM)
+          eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, FSensorStateMenu);
+#endif //PAT9125
 	return fsensor_enabled;
 }
 
-void fsensor_disable(void)
+void fsensor_disable(bool bUpdateEEPROM)
-{
+{ 
 	fsensor_enabled = false;
-	eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, 0x00); 
 	FSensorStateMenu = 0;
+     if(bUpdateEEPROM)
+          eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, 0x00); 
 }
 
 void fsensor_autoload_set(bool State)
@@ -529,8 +565,6 @@ void fsensor_enque_M600(){
 	printf_P(PSTR("fsensor_update - M600\n"));
 	eeprom_update_byte((uint8_t*)EEPROM_FERROR_COUNT, eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT) + 1);
 	eeprom_update_word((uint16_t*)EEPROM_FERROR_COUNT_TOT, eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT) + 1);
-	enquecommand_front_P(PSTR("PRUSA fsensor_recover"));
-	fsensor_m600_enqueued = true;
 	enquecommand_front_P((PSTR("M600")));
 }
 
@@ -542,7 +576,7 @@ void fsensor_enque_M600(){
 void fsensor_update(void)
 {
 #ifdef PAT9125
-		if (fsensor_enabled && fsensor_watch_runout && (fsensor_err_cnt > FSENSOR_ERR_MAX) && ( ! fsensor_m600_enqueued) )
+		if (fsensor_enabled && fsensor_watch_runout && (fsensor_err_cnt > FSENSOR_ERR_MAX))
 		{
 			bool autoload_enabled_tmp = fsensor_autoload_enabled;
 			fsensor_autoload_enabled = false;
@@ -575,24 +609,86 @@ void fsensor_update(void)
 			err |= (fsensor_oq_er_sum > 2);
 			err |= (fsensor_oq_yd_sum < (4 * FSENSOR_OQ_MIN_YD));
 
-			if (!err)
+            fsensor_restore_print_and_continue();
-			{
-				printf_P(PSTR("fsensor_err_cnt = 0\n"));
-				fsensor_restore_print_and_continue();
-			}
-			else
-			{
-				fsensor_enque_M600();
-				fsensor_watch_runout = false;
-			}
 			fsensor_autoload_enabled = autoload_enabled_tmp;
 			fsensor_oq_meassure_enabled = oq_meassure_enabled_tmp;
+
+			if (!err)
+				printf_P(PSTR("fsensor_err_cnt = 0\n"));
+			else
+				fsensor_enque_M600();
 		}
 #else //PAT9125
-		if ((digitalRead(IR_SENSOR_PIN) == 1) && CHECK_FSENSOR && fsensor_enabled && ir_sensor_detected && ( ! fsensor_m600_enqueued) )
+		if (CHECK_FSENSOR && fsensor_enabled && ir_sensor_detected)
-		{
+        {
-			fsensor_stop_and_save_print();
+               if(digitalRead(IR_SENSOR_PIN))
-			fsensor_enque_M600();
+               {                                  // IR_SENSOR_PIN ~ H
+#if IR_SENSOR_ANALOG
+                    if(!bIRsensorStateFlag)
+                    {
+                         bIRsensorStateFlag=true;
+                         nIRsensorLastTime=_millis();
+                    }
+                    else
+                    {
+                         if((_millis()-nIRsensorLastTime)>IR_SENSOR_STEADY)
+                         {
+                              uint8_t nMUX1,nMUX2;
+                              uint16_t nADC;
+                              bIRsensorStateFlag=false;
+                              // sequence for direct data reading from AD converter
+                              DISABLE_TEMPERATURE_INTERRUPT();
+                              nMUX1=ADMUX;        // ADMUX saving
+                              nMUX2=ADCSRB;
+                              adc_setmux(VOLT_IR_PIN);
+                              ADCSRA|=(1<<ADSC);  // first conversion after ADMUX change discarded (preventively)
+                              while(ADCSRA&(1<<ADSC))
+                                   ;
+                              ADCSRA|=(1<<ADSC);  // second conversion used
+                              while(ADCSRA&(1<<ADSC))
+                                   ;
+                              nADC=ADC;
+                              ADMUX=nMUX1;        // ADMUX restoring
+                              ADCSRB=nMUX2;
+                              ENABLE_TEMPERATURE_INTERRUPT();
+                              // end of sequence for ...
+                              if((oFsensorPCB==ClFsensorPCB::_Rev03b)&&((nADC*OVERSAMPLENR)>((int)IRsensor_Hopen_TRESHOLD)))
+                              {
+                                   fsensor_disable();
+                                   fsensor_not_responding = true;
+                                   printf_P(PSTR("IR sensor not responding (%d)!\n"),1);
+                                   if((ClFsensorActionNA)eeprom_read_byte((uint8_t*)EEPROM_FSENSOR_ACTION_NA)==ClFsensorActionNA::_Pause)
+                                   if(oFsensorActionNA==ClFsensorActionNA::_Pause)
+                                        lcd_pause_print();
+                              }
+                              else
+                              {
+#endif //IR_SENSOR_ANALOG
+                                  fsensor_checkpoint_print();
+                                  fsensor_enque_M600();
+#if IR_SENSOR_ANALOG
+                              }
+                         }
+                    }
+               }
+               else
+               {                                  // IR_SENSOR_PIN ~ L
+                    bIRsensorStateFlag=false;
+#endif //IR_SENSOR_ANALOG
+               }
 		}
 #endif //PAT9125
 }
+
+#if IR_SENSOR_ANALOG
+bool fsensor_IR_check()
+{
+uint16_t volt_IR_int;
+bool bCheckResult;
+
+volt_IR_int=current_voltage_raw_IR;
+bCheckResult=(volt_IR_int<((int)IRsensor_Lmax_TRESHOLD))||(volt_IR_int>((int)IRsensor_Hmin_TRESHOLD));
+bCheckResult=bCheckResult&&(!((oFsensorPCB==ClFsensorPCB::_Rev03b)&&(volt_IR_int>((int)IRsensor_Hopen_TRESHOLD))));
+return(bCheckResult);
+}
+#endif //IR_SENSOR_ANALOG

Firmware/fsensor.h

@@ -3,6 +3,7 @@
 #define FSENSOR_H
 
 #include <inttypes.h>
+#include "config.h"
 
 
 //! minimum meassured chunk length in steps
@@ -20,6 +21,8 @@ extern bool fsensor_oq_meassure_enabled;
 extern void fsensor_stop_and_save_print(void);
 //! restore print - restore position and heatup to original temperature
 extern void fsensor_restore_print_and_continue(void);
+//! split the current gcode stream to insert new instructions
+extern void fsensor_checkpoint_print(void);
 //! @}
 
 //! initialize
@@ -27,8 +30,8 @@ extern void fsensor_init(void);
 
 //! @name enable/disable
 //! @{
-extern bool fsensor_enable(void);
+extern bool fsensor_enable(bool bUpdateEEPROM=true);
-extern void fsensor_disable(void);
+extern void fsensor_disable(bool bUpdateEEPROM=true);
 //! @}
 
 //autoload feature enabled
@@ -65,4 +68,28 @@ extern void fsensor_st_block_begin(block_t* bl);
 extern void fsensor_st_block_chunk(block_t* bl, int cnt);
 //! @}
 
+
+#if IR_SENSOR_ANALOG
+#define IR_SENSOR_STEADY 10                       // [ms]
+
+enum class ClFsensorPCB:uint_least8_t
+{
+    _Old=0,
+    _Rev03b=1,
+    _Undef=EEPROM_EMPTY_VALUE
+};
+
+enum class ClFsensorActionNA:uint_least8_t
+{
+    _Continue=0,
+    _Pause=1,
+    _Undef=EEPROM_EMPTY_VALUE
+};
+
+extern ClFsensorPCB oFsensorPCB;
+extern ClFsensorActionNA oFsensorActionNA;
+
+extern bool fsensor_IR_check();
+#endif //IR_SENSOR_ANALOG
+
 #endif //FSENSOR_H

Firmware/language.c

@@ -17,10 +17,10 @@ uint8_t lang_selected = 0;
 
 #if (LANG_MODE == 0) //primary language only
 
-uint8_t lang_select(uint8_t lang) { return 0; }
+uint8_t lang_select(__attribute__((unused)) uint8_t lang) { return 0; }
 uint8_t lang_get_count() { return 1; }
-uint16_t lang_get_code(uint8_t lang) { return LANG_CODE_EN; }
+uint16_t lang_get_code(__attribute__((unused)) uint8_t lang) { return LANG_CODE_EN; }
-const char* lang_get_name_by_code(uint16_t code) { return _n("English"); }
+const char* lang_get_name_by_code(__attribute__((unused)) uint16_t code) { return _n("English"); }
 void lang_reset(void) { }
 uint8_t lang_is_selected(void) { return 1; }
 

Firmware/menu.cpp

@@ -184,6 +184,22 @@ static void menu_draw_item_puts_P(char type_char, const char* str)
     lcd_printf_P(PSTR("%c%-18.18S%c"), menu_selection_mark(), str, type_char);
 }
 
+static void menu_draw_toggle_puts_P(const char* str, const char* toggle, const uint8_t settings)
+{
+    //settings:
+    //xxxxxcba
+    //a = selection mark. If it's set(1), then '>' will be used as the first character on the line. Else leave blank
+    //b = toggle string is from progmem
+    //c = do not set cursor at all. Must be handled externally.
+    char lineStr[LCD_WIDTH + 1];
+    const char eol = (toggle == NULL)?LCD_STR_ARROW_RIGHT[0]:' ';
+    if (toggle == NULL) toggle = _T(MSG_NA);
+    sprintf_P(lineStr, PSTR("%c%-18.18S"), (settings & 0x01)?'>':' ', str);
+    sprintf_P(lineStr + LCD_WIDTH - ((settings & 0x02)?strlen_P(toggle):strlen(toggle)) - 3, (settings & 0x02)?PSTR("[%S]%c"):PSTR("[%s]%c"), toggle, eol);
+    if (!(settings & 0x04)) lcd_set_cursor(0, menu_row);
+    fputs(lineStr, lcdout);
+}
+
 //! @brief Format sheet name
 //!
 //! @param[in] sheet_E Sheet in EEPROM
@@ -375,6 +391,33 @@ uint8_t menu_item_function_P(const char* str, char number, void (*func)(uint8_t)
     return 0;
 }
 
+uint8_t menu_item_toggle_P(const char* str, const char* toggle, menu_func_t func, const uint8_t settings)
+{
+	if (menu_item == menu_line)
+	{
+		if (lcd_draw_update) menu_draw_toggle_puts_P(str, toggle, settings | (menu_selection_mark()=='>'));
+		if (menu_clicked && (lcd_encoder == menu_item))
+		{
+			if (toggle == NULL) // print N/A warning message
+			{
+				menu_submenu(func);
+				return menu_item_ret();
+			}
+			else // do the actual toggling
+			{
+				menu_clicked = false;
+				lcd_consume_click();
+				lcd_update_enabled = 0;
+				if (func) func();
+				lcd_update_enabled = 1;
+				return menu_item_ret();
+			}
+		}
+	}
+	menu_item++;
+	return 0;
+}
+
 uint8_t menu_item_gcode_P(const char* str, const char* str_gcode)
 {
 	if (menu_item == menu_line)
@@ -390,17 +433,12 @@ uint8_t menu_item_gcode_P(const char* str, const char* str_gcode)
 	return 0;
 }
 
-
-const char menu_20x_space[] PROGMEM = "                    ";
-
 const char menu_fmt_int3[] PROGMEM = "%c%.15S:%s%3d";
 
 const char menu_fmt_float31[] PROGMEM = "%-12.12S%+8.1f";
 
 const char menu_fmt_float13[] PROGMEM = "%c%-13.13S%+5.3f";
 
-const char menu_fmt_float13off[] PROGMEM = "%c%-13.13S%6.6S";
-
 template<typename T>
 static void menu_draw_P(char chr, const char* str, int16_t val);
 
@@ -409,8 +447,8 @@ void menu_draw_P<int16_t*>(char chr, const char* str, int16_t val)
 {
 	int text_len = strlen_P(str);
 	if (text_len > 15) text_len = 15;
-	char spaces[21];
+	char spaces[LCD_WIDTH + 1] = {0};
-	strcpy_P(spaces, menu_20x_space);
+    memset(spaces,' ', LCD_WIDTH);
 	if (val <= -100) spaces[15 - text_len - 1] = 0;
 	else spaces[15 - text_len] = 0;
 	lcd_printf_P(menu_fmt_int3, chr, str, spaces, val);
@@ -423,7 +461,7 @@ void menu_draw_P<uint8_t*>(char chr, const char* str, int16_t val)
     float factor = 1.0f + static_cast<float>(val) / 1000.0f;
     if (val <= _md->minEditValue)
     {
-        lcd_printf_P(menu_fmt_float13off, chr, str, _i(" [off]"));
+        menu_draw_toggle_puts_P(str, _T(MSG_OFF), 0x04 | 0x02 | (chr=='>'));
     }
     else
     {

Firmware/menu.h

@@ -118,6 +118,10 @@ extern uint8_t menu_item_function_P(const char* str, menu_func_t func);
 #define MENU_ITEM_FUNCTION_NR_P(str, number, func, fn_par) do { if (menu_item_function_P(str, number, func, fn_par)) return; } while (0)
 extern uint8_t menu_item_function_P(const char* str, char number, void (*func)(uint8_t), uint8_t fn_par);
 
+#define MENU_ITEM_TOGGLE_P(str, toggle, func) do { if (menu_item_toggle_P(str, toggle, func, 0x02)) return; } while (0)
+#define MENU_ITEM_TOGGLE(str, toggle, func) do { if (menu_item_toggle_P(str, toggle, func, 0x00)) return; } while (0)
+extern uint8_t menu_item_toggle_P(const char* str, const char* toggle, menu_func_t func, const uint8_t settings);
+
 #define MENU_ITEM_GCODE_P(str, str_gcode) do { if (menu_item_gcode_P(str, str_gcode)) return; } while (0)
 extern uint8_t menu_item_gcode_P(const char* str, const char* str_gcode);
 

Firmware/messages.c

@@ -9,7 +9,6 @@
 
 //internationalized messages
 const char MSG_AUTO_HOME[] PROGMEM_I1 = ISTR("Auto home"); ////
-const char MSG_AUTO_MODE_ON[] PROGMEM_I1 = ISTR("Mode [auto power]"); ////
 const char MSG_BABYSTEP_Z[] PROGMEM_I1 = ISTR("Live adjust Z"); //// c=18
 const char MSG_BABYSTEP_Z_NOT_SET[] PROGMEM_I1 = ISTR("Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."); ////c=20 r=12
 const char MSG_BED[] PROGMEM_I1 = ISTR("Bed"); ////
@@ -22,9 +21,7 @@ const char MSG_CARD_MENU[] PROGMEM_I1 = ISTR("Print from SD"); ////
 const char MSG_CONFIRM_NOZZLE_CLEAN[] PROGMEM_I1 = ISTR("Please clean the nozzle for calibration. Click when done."); ////c=20 r=8
 const char MSG_COOLDOWN[] PROGMEM_I1 = ISTR("Cooldown"); ////
 const char MSG_CRASH_DETECTED[] PROGMEM_I1 = ISTR("Crash detected."); ////c=20 r=1
-const char MSG_CRASHDETECT_NA[] PROGMEM_I1 = ISTR("Crash det.  [N/A]"); ////
+const char MSG_CRASHDETECT[] PROGMEM_I1 = ISTR("Crash det."); ////
-const char MSG_CRASHDETECT_OFF[] PROGMEM_I1 = ISTR("Crash det.  [off]"); ////
-const char MSG_CRASHDETECT_ON[] PROGMEM_I1 = ISTR("Crash det.   [on]"); ////
 const char MSG_ERROR[] PROGMEM_I1 = ISTR("ERROR:"); ////
 const char MSG_EXTRUDER[] PROGMEM_I1 = ISTR("Extruder"); ////c=17 r=1
 const char MSG_FILAMENT[] PROGMEM_I1 = ISTR("Filament"); ////c=17 r=1
@@ -40,9 +37,8 @@ const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[] PROGMEM_I1 = ISTR(" of 4"); ////
 const char MSG_FINISHING_MOVEMENTS[] PROGMEM_I1 = ISTR("Finishing movements"); ////c=20 r=1
 const char MSG_FOLLOW_CALIBRATION_FLOW[] PROGMEM_I1 = ISTR("Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."); ////c=20 r=8
 const char MSG_FOLLOW_Z_CALIBRATION_FLOW[] PROGMEM_I1 = ISTR("There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."); ////c=20 r=8
-const char MSG_FSENS_AUTOLOAD_NA[] PROGMEM_I1 = ISTR("F. autoload [N/A]"); ////c=17 r=1
+const char MSG_FSENSOR_AUTOLOAD[] PROGMEM_I1 = ISTR("F. autoload"); ////c=17 r=1
-const char MSG_FSENSOR_OFF[] PROGMEM_I1 = ISTR("Fil. sensor [off]"); ////
+const char MSG_FSENSOR[] PROGMEM_I1 = ISTR("Fil. sensor"); ////
-const char MSG_FSENSOR_ON[] PROGMEM_I1 = ISTR("Fil. sensor  [on]"); ////
 const char MSG_HEATING[] PROGMEM_I1 = ISTR("Heating"); ////
 const char MSG_HEATING_COMPLETE[] PROGMEM_I1 = ISTR("Heating done."); ////c=20
 const char MSG_HOMEYZ[] PROGMEM_I1 = ISTR("Calibrate Z"); ////
@@ -85,14 +81,16 @@ const char MSG_SELFTEST_FILAMENT_SENSOR[] PROGMEM_I1 = ISTR("Filament sensor");
 const char MSG_SELFTEST_WIRINGERROR[] PROGMEM_I1 = ISTR("Wiring error"); ////
 const char MSG_SETTINGS[] PROGMEM_I1 = ISTR("Settings"); ////
 const char MSG_HW_SETUP[] PROGMEM_I1 = ISTR("HW Setup"); ////
-const char MSG_SILENT_MODE_OFF[] PROGMEM_I1 = ISTR("Mode [high power]"); ////
+const char MSG_MODE[] PROGMEM_I1 = ISTR("Mode"); ////
-const char MSG_SILENT_MODE_ON[] PROGMEM_I1 = ISTR("Mode     [silent]"); ////
+const char MSG_HIGH_POWER[] PROGMEM_I1 = ISTR("High power"); ////
-const char MSG_STEALTH_MODE_OFF[] PROGMEM_I1 = ISTR("Mode     [Normal]"); ////
+const char MSG_AUTO_POWER[] PROGMEM_I1 = ISTR("Auto power"); ////
-const char MSG_STEALTH_MODE_ON[] PROGMEM_I1 = ISTR("Mode    [Stealth]"); ////
+const char MSG_SILENT[] PROGMEM_I1 = ISTR("Silent"); ////
+const char MSG_NORMAL[] PROGMEM_I1 = ISTR("Normal"); ////
+const char MSG_STEALTH[] PROGMEM_I1 = ISTR("Stealth"); ////
 const char MSG_STEEL_SHEET_CHECK[] PROGMEM_I1 = ISTR("Is steel sheet on heatbed?"); ////c=20 r=2
 const char MSG_STOP_PRINT[] PROGMEM_I1 = ISTR("Stop print"); ////
 const char MSG_STOPPED[] PROGMEM_I1 = ISTR("STOPPED. "); ////
-const char MSG_TEMP_CALIBRATION[] PROGMEM_I1 = ISTR("Temp. cal.          "); ////c=20 r=1
+const char MSG_TEMP_CALIBRATION[] PROGMEM_I1 = ISTR("Temp. cal."); ////c=12 r=1
 const char MSG_TEMP_CALIBRATION_DONE[] PROGMEM_I1 = ISTR("Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."); ////c=20 r=12
 const char MSG_UNLOAD_FILAMENT[] PROGMEM_I1 = ISTR("Unload filament"); ////c=17
 const char MSG_UNLOADING_FILAMENT[] PROGMEM_I1 = ISTR("Unloading filament"); ////c=20 r=1
@@ -104,13 +102,48 @@ const char MSG_WIZARD_QUIT[] PROGMEM_I1 = ISTR("You can always resume the Wizard
 const char MSG_YES[] PROGMEM_I1 = ISTR("Yes"); ////
 const char MSG_V2_CALIBRATION[] PROGMEM_I1 = ISTR("First layer cal."); ////c=17 r=1
 const char WELCOME_MSG[] PROGMEM_I1 = ISTR(CUSTOM_MENDEL_NAME " OK."); ////c=20
+const char MSG_OFF[] PROGMEM_I1 = ISTR("Off"); ////
+const char MSG_ON[] PROGMEM_I1 = ISTR("On"); ////
+const char MSG_NA[] PROGMEM_I1 = ISTR("N/A"); ////
+const char MSG_AUTO_DEPLETE[] PROGMEM_I1 = ISTR("SpoolJoin"); ////
+const char MSG_CUTTER[] PROGMEM_I1 = ISTR("Cutter"); ////
+const char MSG_NONE[] PROGMEM_I1 = ISTR("None"); ////
+const char MSG_WARN[] PROGMEM_I1 = ISTR("Warn"); ////
+const char MSG_STRICT[] PROGMEM_I1 = ISTR("Strict"); ////
+const char MSG_MODEL[] PROGMEM_I1 = ISTR("Model"); ////
+const char MSG_FIRMWARE[] PROGMEM_I1 = ISTR("Firmware"); ////
+const char MSG_GCODE[] PROGMEM_I1 = ISTR("Gcode"); ////
+const char MSG_NOZZLE_DIAMETER[] PROGMEM_I1 = ISTR("Nozzle d."); ////
+const char MSG_MMU_MODE[] PROGMEM_I1 = ISTR("MMU Mode"); ////
+const char MSG_SD_CARD[] PROGMEM_I1 = ISTR("SD card"); ////
+const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY[] PROGMEM_I1 = ISTR("FlashAir"); ////
+const char MSG_SORT[] PROGMEM_I1 = ISTR("Sort"); ////
+const char MSG_SORT_TIME[] PROGMEM_I1 = ISTR("Time"); ////
+const char MSG_SORT_ALPHA[] PROGMEM_I1 = ISTR("Alphabet"); ////
+const char MSG_RPI_PORT[] PROGMEM_I1 = ISTR("RPi port"); ////
+const char MSG_SOUND[] PROGMEM_I1 = ISTR("Sound"); ////
+const char MSG_SOUND_LOUD[] PROGMEM_I1 = ISTR("Loud"); ////
+const char MSG_SOUND_ONCE[] PROGMEM_I1 = ISTR("Once"); ////
+const char MSG_SOUND_BLIND[] PROGMEM_I1 = ISTR("Assist"); ////
+const char MSG_MESH[] PROGMEM_I1 = ISTR("Mesh"); ////
+const char MSG_Z_PROBE_NR[] PROGMEM_I1 = ISTR("Z-probe nr."); ////
+const char MSG_MAGNETS_COMP[] PROGMEM_I1 = ISTR("Magnets comp."); ////
+const char MSG_FS_ACTION[] PROGMEM_I1 = ISTR("FS Action"); ////
+const char MSG_FS_CONTINUE[] PROGMEM_I1 = ISTR("Cont."); ////
+const char MSG_FS_PAUSE[] PROGMEM_I1 = ISTR("Pause"); ////
+const char MSG_BRIGHTNESS[] PROGMEM_I1 = ISTR("Brightness"); ////
+const char MSG_BL_HIGH[] PROGMEM_I1 = ISTR("Level Bright"); ////
+const char MSG_BL_LOW[] PROGMEM_I1 = ISTR("Level Dimmed"); ////
+const char MSG_TIMEOUT[] PROGMEM_I1 = ISTR("Timeout"); ////
+const char MSG_BRIGHT[] PROGMEM_I1 = ISTR("Bright"); ////
+const char MSG_DIM[] PROGMEM_I1 = ISTR("Dim"); ////
+const char MSG_AUTO[] PROGMEM_I1 = ISTR("Auto"); ////
+
 //not internationalized messages
 const char MSG_SD_WORKDIR_FAIL[] PROGMEM_N1 = "workDir open failed"; ////
 const char MSG_BROWNOUT_RESET[] PROGMEM_N1 = " Brown out Reset"; ////
 const char MSG_EXTERNAL_RESET[] PROGMEM_N1 = " External Reset"; ////
 const char MSG_FILE_SAVED[] PROGMEM_N1 = "Done saving file."; ////
-const char MSG_OFF[] PROGMEM_N1 = "Off"; ////
-const char MSG_ON[] PROGMEM_N1 = "On "; ////
 const char MSG_POSITION_UNKNOWN[] PROGMEM_N1 = "Home X/Y before Z"; ////
 const char MSG_SOFTWARE_RESET[] PROGMEM_N1 = " Software Reset"; ////
 const char MSG_UNKNOWN_COMMAND[] PROGMEM_N1 = "Unknown command: \""; ////
@@ -134,3 +167,4 @@ const char MSG_OCTOPRINT_RESUMED[] PROGMEM_N1 = "// action:resumed"; ////
 const char MSG_OCTOPRINT_CANCEL[] PROGMEM_N1 = "// action:cancel"; ////
 const char MSG_FANCHECK_EXTRUDER[] PROGMEM_N1 = "Err: EXTR. FAN ERROR"; ////c=20
 const char MSG_FANCHECK_PRINT[] PROGMEM_N1 = "Err: PRINT FAN ERROR"; ////c=20
+const char MSG_M112_KILL[] PROGMEM_N1 = "M112 called. Emergency Stop."; ////c=20

Firmware/messages.h

@@ -10,7 +10,6 @@ extern "C" {
 // LCD Menu Messages
 //internationalized messages
 extern const char MSG_AUTO_HOME[];
-extern const char MSG_AUTO_MODE_ON[];
 extern const char MSG_BABYSTEP_Z[];
 extern const char MSG_BABYSTEP_Z_NOT_SET[];
 extern const char MSG_BED[];
@@ -23,9 +22,7 @@ extern const char MSG_CARD_MENU[];
 extern const char MSG_CONFIRM_NOZZLE_CLEAN[];
 extern const char MSG_COOLDOWN[];
 extern const char MSG_CRASH_DETECTED[];
-extern const char MSG_CRASHDETECT_NA[];
+extern const char MSG_CRASHDETECT[];
-extern const char MSG_CRASHDETECT_OFF[];
-extern const char MSG_CRASHDETECT_ON[];
 extern const char MSG_ERROR[];
 extern const char MSG_EXTRUDER[];
 extern const char MSG_FILAMENT[];
@@ -41,9 +38,8 @@ extern const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[];
 extern const char MSG_FINISHING_MOVEMENTS[];
 extern const char MSG_FOLLOW_CALIBRATION_FLOW[];
 extern const char MSG_FOLLOW_Z_CALIBRATION_FLOW[];
-extern const char MSG_FSENS_AUTOLOAD_NA[];
+extern const char MSG_FSENSOR_AUTOLOAD[];
-extern const char MSG_FSENSOR_OFF[];
+extern const char MSG_FSENSOR[];
-extern const char MSG_FSENSOR_ON[];
 extern const char MSG_HEATING[];
 extern const char MSG_HEATING_COMPLETE[];
 extern const char MSG_HOMEYZ[];
@@ -85,10 +81,12 @@ extern const char MSG_SELFTEST_FILAMENT_SENSOR[];
 extern const char MSG_SELFTEST_WIRINGERROR[];
 extern const char MSG_SETTINGS[];
 extern const char MSG_HW_SETUP[];
-extern const char MSG_SILENT_MODE_OFF[];
+extern const char MSG_MODE[];
-extern const char MSG_SILENT_MODE_ON[];
+extern const char MSG_HIGH_POWER[];
-extern const char MSG_STEALTH_MODE_OFF[];
+extern const char MSG_AUTO_POWER[];
-extern const char MSG_STEALTH_MODE_ON[];
+extern const char MSG_SILENT[];
+extern const char MSG_NORMAL[];
+extern const char MSG_STEALTH[];
 extern const char MSG_STEEL_SHEET_CHECK[];
 extern const char MSG_STOP_PRINT[];
 extern const char MSG_STOPPED[];
@@ -104,12 +102,47 @@ extern const char MSG_WIZARD_QUIT[];
 extern const char MSG_YES[];
 extern const char MSG_V2_CALIBRATION[];
 extern const char WELCOME_MSG[];
+extern const char MSG_OFF[];
+extern const char MSG_ON[];
+extern const char MSG_NA[];
+extern const char MSG_AUTO_DEPLETE[];
+extern const char MSG_CUTTER[];
+extern const char MSG_NONE[];
+extern const char MSG_WARN[];
+extern const char MSG_STRICT[];
+extern const char MSG_MODEL[];
+extern const char MSG_FIRMWARE[];
+extern const char MSG_GCODE[];
+extern const char MSG_NOZZLE_DIAMETER[];
+extern const char MSG_MMU_MODE[];
+extern const char MSG_SD_CARD[];
+extern const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY[];
+extern const char MSG_SORT[];
+extern const char MSG_SORT_TIME[];
+extern const char MSG_SORT_ALPHA[];
+extern const char MSG_RPI_PORT[];
+extern const char MSG_SOUND[];
+extern const char MSG_SOUND_LOUD[];
+extern const char MSG_SOUND_ONCE[];
+extern const char MSG_SOUND_BLIND[];
+extern const char MSG_MESH[];
+extern const char MSG_Z_PROBE_NR[];
+extern const char MSG_MAGNETS_COMP[];
+extern const char MSG_FS_ACTION[];
+extern const char MSG_FS_CONTINUE[];
+extern const char MSG_FS_PAUSE[];
+extern const char MSG_BRIGHTNESS[];
+extern const char MSG_BL_HIGH[];
+extern const char MSG_BL_LOW[];
+extern const char MSG_TIMEOUT[];
+extern const char MSG_BRIGHT[];
+extern const char MSG_DIM[];
+extern const char MSG_AUTO[];
+
 //not internationalized messages
 extern const char MSG_BROWNOUT_RESET[];
 extern const char MSG_EXTERNAL_RESET[];
 extern const char MSG_FILE_SAVED[];
-extern const char MSG_OFF[];
-extern const char MSG_ON[];
 extern const char MSG_POSITION_UNKNOWN[];
 extern const char MSG_SOFTWARE_RESET[];
 extern const char MSG_UNKNOWN_COMMAND[];
@@ -135,6 +168,7 @@ extern const char MSG_OCTOPRINT_RESUMED[];
 extern const char MSG_OCTOPRINT_CANCEL[];
 extern const char MSG_FANCHECK_EXTRUDER[];
 extern const char MSG_FANCHECK_PRINT[];
+extern const char MSG_M112_KILL[];
 
 #if defined(__cplusplus)
 }

Firmware/mmu.cpp

@@ -70,6 +70,7 @@ uint8_t mmu_extruder = MMU_FILAMENT_UNKNOWN;
 uint8_t tmp_extruder = MMU_FILAMENT_UNKNOWN;
 
 int8_t mmu_finda = -1;
+uint32_t mmu_last_finda_response = 0;
 
 int16_t mmu_version = -1;
 
@@ -264,6 +265,7 @@ void mmu_loop(void)
 		if (mmu_rx_ok() > 0)
 		{
 			fscanf_P(uart2io, PSTR("%hhu"), &mmu_finda); //scan finda from buffer
+			mmu_last_finda_response = _millis();
 			FDEBUG_PRINTF_P(PSTR("MMU => '%dok'\n"), mmu_finda);
 			puts_P(PSTR("MMU - ENABLED"));
 			mmu_enabled = true;
@@ -376,11 +378,11 @@ void mmu_loop(void)
 		if (mmu_rx_ok() > 0)
 		{
 			fscanf_P(uart2io, PSTR("%hhu"), &mmu_finda); //scan finda from buffer
+			mmu_last_finda_response = _millis();
 			FDEBUG_PRINTF_P(PSTR("MMU => '%dok'\n"), mmu_finda);
 			//printf_P(PSTR("Eact: %d\n"), int(e_active()));
 			if (!mmu_finda && CHECK_FSENSOR && fsensor_enabled) {
-				fsensor_stop_and_save_print();
+				fsensor_checkpoint_print();
-				enquecommand_front_P(PSTR("PRUSA fsensor_recover")); //then recover
 				ad_markDepleted(mmu_extruder);
 				if (lcd_autoDepleteEnabled() && !ad_allDepleted())
 				{
@@ -1355,7 +1357,7 @@ void lcd_mmu_load_to_nozzle(uint8_t filament_nr)
         manage_response(true, true, MMU_TCODE_MOVE);
         mmu_continue_loading(false);
         mmu_extruder = tmp_extruder; //filament change is finished
-        marlin_rise_z();
+        raise_z_above(MIN_Z_FOR_LOAD, false);
         mmu_load_to_nozzle();
         load_filament_final_feed();
         st_synchronize();
@@ -1556,34 +1558,27 @@ void mmu_continue_loading(bool blocking)
             increment_load_fail();
             // no break
         case Ls::Retry:
-#ifdef MMU_HAS_CUTTER
+            ++retry; // overflow not handled, as it is not dangerous.
-            if (1 == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
+            if (retry >= max_retry)
             {
-                mmu_command(MmuCmd::K0 + tmp_extruder);
+                state = Ls::Unload;
-                manage_response(true, true, MMU_UNLOAD_MOVE);
+#ifdef MMU_HAS_CUTTER
-            }
+                if (1 == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
+                {
+                    mmu_command(MmuCmd::K0 + tmp_extruder);
+                    manage_response(true, true, MMU_UNLOAD_MOVE);
+                }
 #endif //MMU_HAS_CUTTER
+            }
             mmu_command(MmuCmd::T0 + tmp_extruder);
             manage_response(true, true, MMU_TCODE_MOVE);
             success = load_more();
             if (success) success = can_load();
-            ++retry; // overflow not handled, as it is not dangerous.
+
-            if (retry >= max_retry) state = Ls::Unload;
             break;
         case Ls::Unload:
             stop_and_save_print_to_ram(0, 0);
-
+            long_pause();
-            //lift z
-            current_position[Z_AXIS] += Z_PAUSE_LIFT;
-            if (current_position[Z_AXIS] > Z_MAX_POS) current_position[Z_AXIS] = Z_MAX_POS;
-            plan_buffer_line_curposXYZE(15, active_extruder);
-            st_synchronize();
-
-            //Move XY to side
-            current_position[X_AXIS] = X_PAUSE_POS;
-            current_position[Y_AXIS] = Y_PAUSE_POS;
-            plan_buffer_line_curposXYZE(50, active_extruder);
-            st_synchronize();
 
             mmu_command(MmuCmd::U0);
             manage_response(false, true, MMU_UNLOAD_MOVE);

Firmware/mmu.h

@@ -14,6 +14,7 @@ extern uint8_t mmu_extruder;
 extern uint8_t tmp_extruder;
 
 extern int8_t mmu_finda;
+extern uint32_t mmu_last_finda_response;
 extern bool ir_sensor_detected;
 
 extern int16_t mmu_version;

Firmware/optiboot_w25x20cl.cpp

@@ -258,11 +258,11 @@ void optiboot_w25x20cl_enter()
         uint32_t addr = (((uint32_t)rampz) << 16) | address;
         // During a single bootloader run, only erase a 64kB block once.
         // An 8bit bitmask 'pages_erased' covers 512kB of FLASH memory.
-        if (address == 0 && (pages_erased & (1 << addr)) == 0) {
+        if ((address == 0) && (pages_erased & (1 << (addr >> 16))) == 0) {
           w25x20cl_wait_busy();
           w25x20cl_enable_wr();
           w25x20cl_block64_erase(addr);
-          pages_erased |= (1 << addr);
+          pages_erased |= (1 << (addr >> 16));
         }
         w25x20cl_wait_busy();
         w25x20cl_enable_wr();

Firmware/pins_Einsy_1_0.h

@@ -71,12 +71,13 @@
 #define HEATER_2_PIN        -1
 #define TEMP_2_PIN          -1
 
-#define TEMP_AMBIENT_PIN     5 //A5
+#define TEMP_AMBIENT_PIN     6 //A6
 
 #define TEMP_PINDA_PIN       3 //A3
 
 #define VOLT_PWR_PIN         4 //A4
 #define VOLT_BED_PIN         9 //A9
+#define VOLT_IR_PIN          8 //A8
 
 
 #define E0_TMC2130_CS       66
@@ -99,7 +100,7 @@
 
 //#define KILL_PIN            32
 
-//#define LCD_BL_PIN          5   //backlight control pin
+#define LCD_BL_PIN          5   //backlight control pin
 #define BEEPER              84  // Beeper on AUX-4
 #define LCD_PINS_RS         82
 #define LCD_PINS_ENABLE     61 // !!! changed from 18 (EINY03)

Firmware/planner.cpp

@@ -659,15 +659,15 @@ float junction_deviation = 0.1;
 // Add a new linear movement to the buffer. steps_x, _y and _z is the absolute position in 
 // mm. Microseconds specify how many microseconds the move should take to perform. To aid acceleration
 // calculation the caller must also provide the physical length of the line in millimeters.
-void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, uint8_t extruder)
+void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, uint8_t extruder, const float* gcode_target)
 {
     // Calculate the buffer head after we push this byte
   int next_buffer_head = next_block_index(block_buffer_head);
 
   // If the buffer is full: good! That means we are well ahead of the robot. 
   // Rest here until there is room in the buffer.
+  waiting_inside_plan_buffer_line_print_aborted = false;
   if (block_buffer_tail == next_buffer_head) {
-      waiting_inside_plan_buffer_line_print_aborted = false;
       do {
           manage_heater(); 
           // Vojtech: Don't disable motors inside the planner!
@@ -687,6 +687,29 @@ void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate
   planner_update_queue_min_counter();
 #endif /* PLANNER_DIAGNOSTICS */
 
+  // Prepare to set up new block
+  block_t *block = &block_buffer[block_buffer_head];
+
+  // Mark block as not busy (Not executed by the stepper interrupt, could be still tinkered with.)
+  block->busy = false;
+
+  // Set sdlen for calculating sd position
+  block->sdlen = 0;
+
+  // Save original destination of the move
+  if (gcode_target)
+      memcpy(block->gcode_target, gcode_target, sizeof(block_t::gcode_target));
+  else
+  {
+      block->gcode_target[X_AXIS] = x;
+      block->gcode_target[Y_AXIS] = y;
+      block->gcode_target[Z_AXIS] = z;
+      block->gcode_target[E_AXIS] = e;
+  }
+
+  // Save the global feedrate at scheduling time
+  block->gcode_feedrate = feedrate;
+
 #ifdef ENABLE_AUTO_BED_LEVELING
   apply_rotation_xyz(plan_bed_level_matrix, x, y, z);
 #endif // ENABLE_AUTO_BED_LEVELING
@@ -786,15 +809,6 @@ void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate
   }
   #endif
 
-  // Prepare to set up new block
-  block_t *block = &block_buffer[block_buffer_head];
-
-  // Set sdlen for calculating sd position
-  block->sdlen = 0;
-
-  // Mark block as not busy (Not executed by the stepper interrupt, could be still tinkered with.)
-  block->busy = false;
-
   // Number of steps for each axis
 #ifndef COREXY
 // default non-h-bot planning

Firmware/planner.h

@@ -116,7 +116,10 @@ typedef struct {
   unsigned long abs_adv_steps_multiplier8; // Factorised by 2^8 to avoid float
 #endif
 
-  uint16_t sdlen;
+  // Save/recovery state data
+  float gcode_target[NUM_AXIS];     // Target (abs mm) of the original Gcode instruction
+  uint16_t gcode_feedrate;          // Default and/or move feedrate
+  uint16_t sdlen;                   // Length of the Gcode instruction
 } block_t;
 
 #ifdef LIN_ADVANCE
@@ -147,7 +150,7 @@ vector_3 plan_get_position();
 /// The performance penalty is negligible, since these planned lines are usually maintenance moves with the extruder.
 void plan_buffer_line_curposXYZE(float feed_rate, uint8_t extruder);
 
-void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, uint8_t extruder);
+void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate, uint8_t extruder, const float* gcode_target = NULL);
 //void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder);
 #endif // ENABLE_AUTO_BED_LEVELING
 
@@ -238,6 +241,7 @@ FORCE_INLINE bool planner_queue_full() {
 // wait for the steppers to stop,
 // update planner's current position and the current_position of the front end.
 extern void planner_abort_hard();
+extern bool waiting_inside_plan_buffer_line_print_aborted;
 
 #ifdef PREVENT_DANGEROUS_EXTRUDE
 void set_extrude_min_temp(float temp);

Firmware/sound.cpp

@@ -5,6 +5,7 @@
 //#include <inttypes.h>
 //#include <avr/eeprom.h>
 //#include "eeprom.h"
+#include "backlight.h"
 
 
 //eSOUND_MODE eSoundMode=e_SOUND_MODE_LOUD;
@@ -63,6 +64,7 @@ Sound_SaveMode();
 
 //if critical is true then silend and once mode is ignored
 void Sound_MakeCustom(uint16_t ms,uint16_t tone_,bool critical){
+    backlight_wake();
      if (!critical){
           if (eSoundMode != e_SOUND_MODE_SILENT){
                if(!tone_){
@@ -135,6 +137,7 @@ switch(eSoundMode)
 
 static void Sound_DoSound_Blind_Alert(void)
 {
+    backlight_wake(1);
      uint8_t nI;
 
      for(nI=0; nI<20; nI++)
@@ -148,6 +151,7 @@ static void Sound_DoSound_Blind_Alert(void)
 
  static void Sound_DoSound_Encoder_Move(void)
 {
+    backlight_wake();
 uint8_t nI;
 
  for(nI=0;nI<5;nI++)
@@ -161,6 +165,7 @@ uint8_t nI;
 
 static void Sound_DoSound_Echo(void)
 {
+    backlight_wake();
 uint8_t nI;
 
 for(nI=0;nI<10;nI++)
@@ -174,6 +179,7 @@ for(nI=0;nI<10;nI++)
 
 static void Sound_DoSound_Prompt(void)
 {
+    backlight_wake(2);
 WRITE(BEEPER,HIGH);
 _delay_ms(500);
 WRITE(BEEPER,LOW);
@@ -181,6 +187,7 @@ WRITE(BEEPER,LOW);
 
 static void Sound_DoSound_Alert(bool bOnce)
 {
+    backlight_wake();
 uint8_t nI,nMax;
 
 nMax=bOnce?1:3;

Firmware/sound.h

@@ -3,12 +3,6 @@
 #define SOUND_H
 
 
-#define MSG_SOUND_MODE_LOUD   "Sound      [loud]"
-#define MSG_SOUND_MODE_ONCE   "Sound      [once]"
-#define MSG_SOUND_MODE_SILENT "Sound    [silent]"
-#define MSG_SOUND_MODE_BLIND  "Sound    [assist]" 
-
-
 #define e_SOUND_MODE_NULL 0xFF
 typedef enum
      {e_SOUND_MODE_LOUD,e_SOUND_MODE_ONCE,e_SOUND_MODE_SILENT,e_SOUND_MODE_BLIND} eSOUND_MODE;

Firmware/temperature.cpp

@@ -44,6 +44,8 @@
 #include "Timer.h"
 #include "Configuration_prusa.h"
 
+#include "config.h"
+
 //===========================================================================
 //=============================public variables============================
 //===========================================================================
@@ -71,6 +73,10 @@ int current_voltage_raw_pwr = 0;
 int current_voltage_raw_bed = 0;
 #endif
 
+#if IR_SENSOR_ANALOG
+int current_voltage_raw_IR = 0;
+#endif //IR_SENSOR_ANALOG
+
 int current_temperature_bed_raw = 0;
 float current_temperature_bed = 0.0;
   
@@ -873,7 +879,7 @@ static float analog2temp(int raw, uint8_t e) {
       SERIAL_ERROR_START;
       SERIAL_ERROR((int)e);
       SERIAL_ERRORLNPGM(" - Invalid extruder number !");
-      kill(PSTR(""), 6);
+      kill(NULL, 6);
       return 0.0;
   } 
   #ifdef HEATER_0_USES_MAX6675
@@ -1576,11 +1582,14 @@ void adc_ready(void) //callback from adc when sampling finished
 	current_voltage_raw_pwr = adc_values[ADC_PIN_IDX(VOLT_PWR_PIN)];
 #endif
 #ifdef AMBIENT_THERMISTOR
-	current_temperature_raw_ambient = adc_values[ADC_PIN_IDX(TEMP_AMBIENT_PIN)];
+	current_temperature_raw_ambient = adc_values[ADC_PIN_IDX(TEMP_AMBIENT_PIN)]; // 5->6
 #endif //AMBIENT_THERMISTOR
 #ifdef VOLT_BED_PIN
 	current_voltage_raw_bed = adc_values[ADC_PIN_IDX(VOLT_BED_PIN)]; // 6->9
 #endif
+#if IR_SENSOR_ANALOG
+     current_voltage_raw_IR = adc_values[ADC_PIN_IDX(VOLT_IR_PIN)];
+#endif //IR_SENSOR_ANALOG
 	temp_meas_ready = true;
 }
 

Firmware/temperature.h

@@ -27,6 +27,8 @@
   #include "stepper.h"
 #endif
 
+#include "config.h"
+
 
 #ifdef SYSTEM_TIMER_2
 
@@ -74,6 +76,9 @@ extern int current_voltage_raw_pwr;
 extern int current_voltage_raw_bed;
 #endif
 
+#if IR_SENSOR_ANALOG
+extern int current_voltage_raw_IR;
+#endif //IR_SENSOR_ANALOG
 
 #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
   extern unsigned char soft_pwm_bed;

Firmware/tmc2130.cpp

@@ -24,7 +24,7 @@ uint8_t tmc2130_current_h[4] = TMC2130_CURRENTS_H;
 uint8_t tmc2130_current_r[4] = TMC2130_CURRENTS_R;
 
 //running currents for homing
-uint8_t tmc2130_current_r_home[4] = {8, 10, 20, 18};
+uint8_t tmc2130_current_r_home[4] = TMC2130_CURRENTS_R_HOME;
 
 
 //pwm_ampl
@@ -40,7 +40,7 @@ uint8_t tmc2130_mres[4] = {0, 0, 0, 0}; //will be filed at begin of init
 
 
 uint8_t tmc2130_sg_thr[4] = {TMC2130_SG_THRS_X, TMC2130_SG_THRS_Y, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E};
-uint8_t tmc2130_sg_thr_home[4] = {3, 3, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E};
+uint8_t tmc2130_sg_thr_home[4] = TMC2130_SG_THRS_HOME;
 
 
 uint8_t tmc2130_sg_homing_axes_mask = 0x00;
@@ -427,7 +427,7 @@ void tmc2130_check_overtemp()
 
 void tmc2130_setup_chopper(uint8_t axis, uint8_t mres, uint8_t current_h, uint8_t current_r)
 {
-	uint8_t intpol = 1;
+	uint8_t intpol = (mres != 0); // intpol to 256 only if microsteps aren't 256
 	uint8_t toff = tmc2130_chopper_config[axis].toff; // toff = 3 (fchop = 27.778kHz)
 	uint8_t hstrt = tmc2130_chopper_config[axis].hstr; //initial 4, modified to 5
 	uint8_t hend = tmc2130_chopper_config[axis].hend; //original value = 1
@@ -600,7 +600,7 @@ void tmc2130_wr_THIGH(uint8_t axis, uint32_t val32)
 
 uint8_t tmc2130_usteps2mres(uint16_t usteps)
 {
-	uint8_t mres = 8; while (mres && (usteps >>= 1)) mres--;
+	uint8_t mres = 8; while (usteps >>= 1) mres--;
 	return mres;
 }
 
@@ -807,15 +807,15 @@ void tmc2130_goto_step(uint8_t axis, uint8_t step, uint8_t dir, uint16_t delay_u
 	{
 		dir = tmc2130_get_inv(axis)?0:1;
 		int steps = (int)step - (int)(mscnt >> shift);
-		if (steps < 0)
-		{
-			dir ^= 1;
-			steps = -steps;
-		}
 		if (steps > static_cast<int>(cnt / 2))
 		{
 			dir ^= 1;
-			steps = cnt - steps;
+			steps = cnt - steps; // This can create a negative step value
+		}
+        if (steps < 0)
+		{
+			dir ^= 1;
+			steps = -steps;
 		}
 		cnt = steps;
 	}

Firmware/ultralcd.h

@@ -6,6 +6,9 @@
 #include "conv2str.h"
 #include "menu.h"
 #include "mesh_bed_calibration.h"
+#include "config.h"
+
+#include "config.h"
 
 extern void menu_lcd_longpress_func(void);
 extern void menu_lcd_charsetup_func(void);
@@ -47,6 +50,7 @@ unsigned char lcd_choose_color();
 void lcd_load_filament_color_check();
 //void lcd_mylang();
 
+extern void lcd_belttest();
 extern bool lcd_selftest();
 
 void lcd_menu_statistics(); 
@@ -217,7 +221,9 @@ void lcd_set_degree();
 void lcd_set_progress();
 #endif
 
+#if (LANG_MODE != 0)
 void lcd_language();
+#endif
 
 void lcd_wizard();
 bool lcd_autoDepleteEnabled();
@@ -244,4 +250,12 @@ enum class WizState : uint8_t
 
 void lcd_wizard(WizState state);
 
+#define VOLT_DIV_REF 5
+#if IR_SENSOR_ANALOG
+#define IRsensor_Hmin_TRESHOLD (3.0*1023*OVERSAMPLENR/VOLT_DIV_REF) // ~3.0V (0.6*Vcc)
+#define IRsensor_Lmax_TRESHOLD (1.5*1023*OVERSAMPLENR/VOLT_DIV_REF) // ~1.5V (0.3*Vcc)
+#define IRsensor_Hopen_TRESHOLD (4.6*1023*OVERSAMPLENR/VOLT_DIV_REF) // ~4.6V (N.C. @ Ru~20-50k, Rd'=56k, Ru'=10k)
+#define IRsensor_Ldiode_TRESHOLD (0.3*1023*OVERSAMPLENR/VOLT_DIV_REF) // ~0.3V
+#endif //IR_SENSOR_ANALOG
+
 #endif //ULTRALCD_H

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -260,11 +260,13 @@
 #define TMC2130_SG_THRS_Y       3     // stallguard sensitivity for Y axis
 #define TMC2130_SG_THRS_Z       4     // stallguard sensitivity for Z axis
 #define TMC2130_SG_THRS_E       3     // stallguard sensitivity for E axis
+#define TMC2130_SG_THRS_HOME {3, 3, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E}
 
 //new settings is possible for vsense = 1, running current value > 31 set vsense to zero and shift both currents by 1 bit right (Z axis only)
 #define TMC2130_CURRENTS_H {16, 20, 35, 30}  // default holding currents for all axes
 #define TMC2130_CURRENTS_R {16, 20, 35, 30}  // default running currents for all axes
-#define TMC2130_UNLOAD_CURRENT_R 12			 // lowe current for M600 to protect filament sensor 
+#define TMC2130_CURRENTS_R_HOME {8, 10, 20, 18}  // homing running currents for all axes
+// #define TMC2130_UNLOAD_CURRENT_R 12			 // lower current for M600 to protect filament sensor - Unused
 
 #define TMC2130_STEALTH_Z
 

Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h

@@ -262,11 +262,13 @@
 #define TMC2130_SG_THRS_Y       3     // stallguard sensitivity for Y axis
 #define TMC2130_SG_THRS_Z       4     // stallguard sensitivity for Z axis
 #define TMC2130_SG_THRS_E       3     // stallguard sensitivity for E axis
+#define TMC2130_SG_THRS_HOME {3, 3, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E}
 
 //new settings is possible for vsense = 1, running current value > 31 set vsense to zero and shift both currents by 1 bit right (Z axis only)
 #define TMC2130_CURRENTS_H {16, 20, 35, 30}  // default holding currents for all axes
 #define TMC2130_CURRENTS_R {16, 20, 35, 30}  // default running currents for all axes
-#define TMC2130_UNLOAD_CURRENT_R 12			 // lowe current for M600 to protect filament sensor 
+#define TMC2130_CURRENTS_R_HOME {8, 10, 20, 18}  // homing running currents for all axes
+// #define TMC2130_UNLOAD_CURRENT_R 12			 // lower current for M600 to protect filament sensor - Unused
 
 #define TMC2130_STEALTH_Z
 

PF-build.sh

@@ -56,7 +56,7 @@
 #   Some may argue that this is only used by a script, BUT as soon someone accidentally or on purpose starts Arduino IDE
 #   it will use the default Arduino IDE folders and so can corrupt the build environment.
 #
-# Version: 1.0.6-Build_9
+# Version: 1.0.6-Build_10
 # Change log:
 # 12 Jan 2019, 3d-gussner, Fixed "compiler.c.elf.flags=-w -Os -Wl,-u,vfprintf -lprintf_flt -lm -Wl,--gc-sections" in 'platform.txt'
 # 16 Jan 2019, 3d-gussner, Build_2, Added development check to modify 'Configuration.h' to prevent unwanted LCD messages that Firmware is unknown
@@ -112,7 +112,9 @@
 #                          Changed Hex-files folder to PF-build-hex as requested in PR
 # 23 Jul 2019, 3d-gussner, Added Finding OS version routine so supporting new OS should get easier
 # 26 Jul 2019, 3d-gussner, Change JSON repository to prusa3d after PR https://github.com/prusa3d/Arduino_Boards/pull/1 was merged
-
+# 23 Sep 2019, 3d-gussner, Prepare PF-build.sh for comming Prusa3d/Arduino_Boards version 1.0.2 Pull Request
+# 17 Oct 2019, 3d-gussner, Changed folder and check file names to have seperated build enviroments depening on Arduino IDE version and
+#                          board-versions. 
 #### Start check if OSTYPE is supported
 OS_FOUND=$( command -v uname)
 
@@ -211,7 +213,8 @@ fi
 #### Set build environment 
 ARDUINO_ENV="1.8.5"
 BUILD_ENV="1.0.6"
-BOARD="PrusaResearchRambo"
+BOARD="rambo"
+BOARD_PACKAGE_NAME="PrusaResearchRambo"
 BOARD_VERSION="1.0.1"
 BOARD_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/master/IDE_Board_Manager/package_prusa3d_index.json"
 BOARD_FILENAME="prusa3drambo"
@@ -229,6 +232,7 @@ echo ""
 echo "Ardunio IDE :" $ARDUINO_ENV
 echo "Build env   :" $BUILD_ENV
 echo "Board       :" $BOARD
+echo "Package name:" $BOARD_PACKAGE_NAME
 echo "Specific Lib:" $LIB
 echo ""
 
@@ -259,12 +263,12 @@ if [ $TARGET_OS == "windows" ]; then
 		wget https://downloads.arduino.cc/arduino-$ARDUINO_ENV-windows.zip || exit 7
 		echo "$(tput sgr 0)"
 	fi
-	if [ ! -d "../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor" ]; then
+	if [[ ! -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" && ! -e "../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
 		echo "$(tput setaf 6)Unzipping Windows 32/64-bit Arduino IDE portable...$(tput setaf 2)"
 		sleep 2
 		unzip arduino-$ARDUINO_ENV-windows.zip -d ../PF-build-env-$BUILD_ENV || exit 7
-		mv ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor
+		mv ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor
-		echo "# arduino-$ARDUINO_ENV-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$TARGET_OS-$Processor
+		echo "# arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
 		echo "$(tput sgr0)"
 	fi
 fi
@@ -277,55 +281,55 @@ if [ $TARGET_OS == "linux" ]; then
 		wget --no-check-certificate https://downloads.arduino.cc/arduino-$ARDUINO_ENV-linux$Processor.tar.xz || exit 8
 		echo "$(tput sgr 0)"
 	fi
-	if [[ ! -d "../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor" && ! -e "../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$TARGET_OS-$Processor.txt" ]]; then
+	if [[ ! -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" && ! -e "../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
 		echo "$(tput setaf 6)Unzipping Linux $Processor Arduino IDE portable...$(tput setaf 2)"
 		sleep 2
 		tar -xvf arduino-$ARDUINO_ENV-linux$Processor.tar.xz -C ../PF-build-env-$BUILD_ENV/ || exit 8
-		mv ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor
+		mv ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor
-		echo "# arduino-$ARDUINO_ENV-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$TARGET_OS-$Processor.txt
+		echo "# arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
 		echo "$(tput sgr0)"
 	fi
 fi
 # Make Arduino IDE portable
-if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/ ]; then
+if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/ ]; then
-	mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/
+	mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/
 fi
 
-if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/ ]; then
+if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/ ]; then
-	mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable
+	mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable
 fi
-if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/output/ ]; then
+if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/output/ ]; then
-	mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/output
+	mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/output
 fi
-if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/ ]; then
+if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/ ]; then
-	mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages
+	mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages
 fi
-if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/sketchbook/ ]; then
+if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook/ ]; then
-	mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/sketchbook
+	mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook
 fi
-if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/sketchbook/libraries/ ]; then
+if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook/libraries/ ]; then
-	mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/sketchbook/libraries
+	mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook/libraries
 fi
-if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/staging/ ]; then
+if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/staging/ ]; then
-	mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/staging
+	mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/staging
 fi
 
 # Change Arduino IDE preferences
-if [ ! -e ../PF-build-env-$BUILD_ENV/Preferences-$TARGET_OS-$Processor.txt ]; then
+if [ ! -e ../PF-build-env-$BUILD_ENV/Preferences-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt ]; then
-	echo "$(tput setaf 6)Setting $TARGET_OS-$Processor Arduino IDE preferences for portable GUI usage...$(tput setaf 2)"
+	echo "$(tput setaf 6)Setting $ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor Arduino IDE preferences for portable GUI usage...$(tput setaf 2)"
 	sleep 2
 	echo "update.check"
-	sed -i 's/update.check = true/update.check = false/g' ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/lib/preferences.txt
+	sed -i 's/update.check = true/update.check = false/g' ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
 	echo "board"
-	sed -i 's/board = uno/board = rambo/g' ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/lib/preferences.txt
+	sed -i 's/board = uno/board = $BOARD/g' ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
 	echo "editor.linenumbers"
-	sed -i 's/editor.linenumbers = false/editor.linenumbers = true/g' ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/lib/preferences.txt
+	sed -i 's/editor.linenumbers = false/editor.linenumbers = true/g' ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
 	echo "boardsmanager.additional.urls"
-	echo "boardsmanager.additional.urls=$BOARD_URL" >>../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/lib/preferences.txt
+	echo "boardsmanager.additional.urls=$BOARD_URL" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
-	echo "build.verbose=true" >>../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/lib/preferences.txt
+	echo "build.verbose=true" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
-	echo "compiler.cache_core=false" >>../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/lib/preferences.txt
+	echo "compiler.cache_core=false" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
-	echo "compiler.warning_level=all" >>../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/lib/preferences.txt
+	echo "compiler.warning_level=all" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
-	echo "# Preferences-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/Preferences-$TARGET_OS-$Processor.txt
+	echo "# Preferences-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/Preferences-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
 	echo "$(tput sgr0)"
 fi
 
@@ -336,25 +340,26 @@ if [ ! -f "$BOARD_FILENAME-$BOARD_VERSION.tar.bz2" ]; then
 	sleep 2
 	wget $BOARD_FILE_URL || exit 9
 fi
-if [[ ! -d "../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD/hardware/avr/$BOARD_VERSION" || ! -e "../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
+if [[ ! -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION" || ! -e "../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
-	echo "$(tput setaf 6)Unzipping $BOARD Arduino IDE portable...$(tput setaf 2)"
+	echo "$(tput setaf 6)Unzipping $BOARD_PACKAGE_NAME Arduino IDE portable...$(tput setaf 2)"
 	sleep 2
 	tar -xvf $BOARD_FILENAME-$BOARD_VERSION.tar.bz2 -C ../PF-build-env-$BUILD_ENV/ || exit 10
-	if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD ]; then
+	if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME ]; then
-		mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD
+		mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME
 	fi
-	if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD ]; then
+	if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME ]; then
-		mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD
+		mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME
 	fi
-	if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD/hardware ]; then
+	if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware ]; then
-		mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD/hardware
+		mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware
 	fi
-	if [ ! -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD/hardware/avr ]; then
+	if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr ]; then
-		mkdir ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD/hardware/avr
+		mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr
 	fi
 	
-	mv ../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$BOARD_VERSION ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/$BOARD/hardware/avr/$BOARD_VERSION
+	mv ../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$BOARD_VERSION ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION
-	echo "# $BOARD_FILENAME-$BOARD_VERSION" >> ../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$BOARD_VERSION-$TARGET_OS-$Processor.txt
+	echo "# $BOARD_FILENAME-$BOARD_VERSION" >> ../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
+
 	echo "$(tput sgr 0)"
 fi	
 
@@ -365,30 +370,30 @@ if [ ! -f "PF-build-env-$BUILD_ENV.zip" ]; then
 	wget $PF_BUILD_FILE_URL || exit 11
 	echo "$(tput sgr 0)"
 fi
-if [ ! -e "../PF-build-env-$BUILD_ENV/PF-build-env-$BUILD_ENV-$TARGET_OS-$Processor.txt" ]; then
+if [ ! -e "../PF-build-env-$BUILD_ENV/PF-build-env-$BUILD_ENV-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]; then
 	echo "$(tput setaf 6)Unzipping Prusa Firmware build environment...$(tput setaf 2)"
 	sleep 2
-	unzip -o PF-build-env-$BUILD_ENV.zip -d ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor || exit 12
+	unzip -o PF-build-env-$BUILD_ENV.zip -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor || exit 12
-	echo "# PF-build-env-$TARGET_OS-$Processor-$BUILD_ENV" >> ../PF-build-env-$BUILD_ENV/PF-build-env-$BUILD_ENV-$TARGET_OS-$Processor.txt
+	echo "# PF-build-env-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor-$BUILD_ENV" >> ../PF-build-env-$BUILD_ENV/PF-build-env-$BUILD_ENV-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
 	echo "$(tput sgr0)"
 fi
 
 # Check if User updated Arduino IDE 1.8.5 boardsmanager and tools
-if [ -d "../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/arduino/tools" ]; then
+if [ -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools" ]; then
 	echo "$(tput setaf 6)Arduino IDE boards / tools have been manually updated...$"
 	echo "Please don't update the 'Arduino AVR boards' as this will prevent running this script (tput setaf 2)"
 	sleep 2
 fi	
-if [ -d "../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2" ]; then
+if [ -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2" ]; then
 	echo "$(tput setaf 6)PrusaReasearch compatible tools have been manually updated...$(tput setaf 2)"
 	sleep 2
 	echo "$(tput setaf 6)Copying Prusa Firmware build environment to manually updated boards / tools...$(tput setaf 2)"
 	sleep 2
-	cp -f ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/hardware/tools/avr/avr/lib/ldscripts/avr6.xn ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/avr/lib/ldscripts/avr6.xn
+	cp -f ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/hardware/tools/avr/avr/lib/ldscripts/avr6.xn ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/avr/lib/ldscripts/avr6.xn
-	echo "# PF-build-env-portable-$TARGET_OS-$Processor-$BUILD_ENV" >> ../PF-build-env-$BUILD_ENV/PF-build-env-portable-$BUILD_ENV-$TARGET_OS-$Processor.txt
+	echo "# PF-build-env-portable-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor-$BUILD_ENV" >> ../PF-build-env-$BUILD_ENV/PF-build-env-portable-$BUILD_ENV-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
 	echo "$(tput sgr0)"
 fi	
-if [ -d "../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2" ]; then
+if [ -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2" ]; then
 	echo "$(tput setaf 1)Arduino IDE tools have been updated manually to a non supported version!!!"
 	echo "Delete ../PF-build-env-$BUILD_ENV and start the script again"
 	echo "Script will not continue until this have been fixed $(tput setaf 2)"
@@ -489,7 +494,7 @@ if [ ! -z "$3" ] ; then
 fi
 
 #Set BUILD_ENV_PATH
-cd ../PF-build-env-$BUILD_ENV/$TARGET_OS-$Processor || exit 24
+cd ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor || exit 24
 BUILD_ENV_PATH="$( pwd -P )"
 
 cd ../..
@@ -634,8 +639,8 @@ do
 	echo "Start to build Prusa Firmware ..."
 	echo "Using variant $VARIANT$(tput setaf 3)"
 	sleep 2
-	#$BUILD_ENV_PATH/arduino-builder -dump-prefs -debug-level 10 -compile -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=$BOARD:avr:rambo -ide-version=10805 -build-path=$BUILD_PATH -warnings=all $SCRIPT_PATH/Firmware/Firmware.ino || exit 14
+	#$BUILD_ENV_PATH/arduino-builder -dump-prefs -debug-level 10 -compile -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=$BOARD_PACKAGE_NAME:avr:$BOARD -build-path=$BUILD_PATH -warnings=all $SCRIPT_PATH/Firmware/Firmware.ino || exit 14
-	$BUILD_ENV_PATH/arduino-builder -compile -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=$BOARD:avr:rambo -ide-version=10805 -build-path=$BUILD_PATH -warnings=all $SCRIPT_PATH/Firmware/Firmware.ino || exit 14
+	$BUILD_ENV_PATH/arduino-builder -compile -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=$BOARD_PACKAGE_NAME:avr:$BOARD -build-path=$BUILD_PATH -warnings=all $SCRIPT_PATH/Firmware/Firmware.ino || exit 14
 	echo "$(tput sgr 0)"
 
 	if [ $LANGUAGES ==  "ALL" ]; then

README.md

@@ -178,6 +178,7 @@ Example:
 
 # 4. Documentation
 run [doxygen](http://www.doxygen.nl/) in Firmware folder
+or visit https://prusa3d.github.io/Prusa-Firmware-Doc for doxygen generated output
 
 # 5. FAQ
 Q:I built firmware using Arduino and I see "?" instead of numbers in printer user interface.

Tests/PrusaStatistics_test.cpp

@@ -198,7 +198,7 @@ void prusa_statistics(int _message, uint8_t _fil_nr) {
 			SERIAL_ECHOLN("}");
 			status_number = 15;
 		}
-		else if (isPrintPaused || card.paused) 
+		else if (isPrintPaused)
 		{
 			SERIAL_ECHO("{");
 			prusa_stat_printerstatus(14);
@@ -490,7 +490,7 @@ void prusa_statistics(int _message, uint8_t _fil_nr) {
 		{   
 			prusa_statistics_case0(15);
 		}
-		else if (isPrintPaused || card.paused) 
+		else if (isPrintPaused)
 		{
 			prusa_statistics_case0(14);
 		}
@@ -753,7 +753,6 @@ TEST_CASE("Prusa_statistics test", "[prusa_stats]")
 				SERIALS_RESET();
 
 				isPrintPaused = 0;
-				card.paused = 0;
 				IS_SD_PRINTING = 1;
 				old_code::prusa_statistics(test_codes[i],0);
 				new_code::prusa_statistics(test_codes[i],0);

lang/lang_en.txt

@@ -37,14 +37,8 @@
 #MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
 "Are left and right Z~carriages all up?"
 
-#MSG_AUTO_DEPLETE_ON c=17 r=1
+#MSG_AUTO_DEPLETE c=17 r=1
-"SpoolJoin    [on]"
+"SpoolJoin"
-
-#
-"SpoolJoin   [N/A]"
-
-#MSG_AUTO_DEPLETE_OFF c=17 r=1
-"SpoolJoin   [off]"
 
 #MSG_AUTO_HOME
 "Auto home"
@@ -130,18 +124,11 @@
 #
 "Copy selected language?"
 
-#MSG_CRASHDETECT_ON
+#MSG_CRASHDETECT
-"Crash det.   [on]"
+"Crash det."
-
 #
 "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
 
-#MSG_CRASHDETECT_NA
-"Crash det.  [N/A]"
-
-#MSG_CRASHDETECT_OFF
-"Crash det.  [off]"
-
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
 
@@ -205,14 +192,8 @@
 #
 "Fail stats MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
+#MSG_FSENSOR_AUTOLOAD
-"F. autoload  [on]"
+"F. autoload"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
 
 #
 "Fail stats"
@@ -223,20 +204,11 @@
 #MSG_SELFTEST_FAN c=20
 "Fan test"
 
-#MSG_FANS_CHECK_ON c=17 r=1
+#MSG_FANS_CHECK
-"Fans check   [on]"
+"Fans check"
 
-#MSG_FANS_CHECK_OFF c=17 r=1
+#MSG_FSENSOR
-"Fans check  [off]"
+"Fil. sensor"
-
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
 
 #
 "Filam. runouts"
@@ -433,11 +405,14 @@
 #MSG_MMU_OK_RESUMING c=20 r=4
 "MMU OK. Resuming..."
 
-#MSG_STEALTH_MODE_OFF
+#MSG_MODE
-"Mode     [Normal]"
+"Mode"
 
-#MSG_SILENT_MODE_ON
+#MSG_NORMAL
-"Mode     [silent]"
+"Normal"
+
+#MSG_SILENT
+"Silent"
 
 #
 "MMU needs user attention."
@@ -445,14 +420,14 @@
 #
 "MMU power fails"
 
-#MSG_STEALTH_MODE_ON
+#MSG_STEALTH
-"Mode    [Stealth]"
+"Stealth"
 
-#MSG_AUTO_MODE_ON
+#MSG_AUTO_POWER
-"Mode [auto power]"
+"Auto power"
 
-#MSG_SILENT_MODE_OFF
+#MSG_HIGH_POWER
-"Mode [high power]"
+"High power"
 
 #
 "MMU2 connected"
@@ -478,7 +453,7 @@
 #MSG_NO_CARD
 "No SD card"
 
-#
+#MSG_NA
 "N/A"
 
 #MSG_NO
@@ -658,20 +633,17 @@
 #MSG_BED_CORRECTION_RIGHT c=14 r=1
 "Right side[um]"
 
-#MSG_SECOND_SERIAL_ON c=17 r=1
+#MSG_RPI_PORT
-"RPi port     [on]"
+"RPi port"
-
-#MSG_SECOND_SERIAL_OFF c=17 r=1
-"RPi port    [off]"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
+#MSG_SD_CARD
-"SD card  [normal]"
+"SD card"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
+#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY
-"SD card [flshAir]"
+"FlashAir"
 
 #
 "Right"
@@ -718,38 +690,38 @@
 #MSG_FILE_CNT c=20 r=4
 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
 
-#MSG_SORT_NONE c=17 r=1
+#MSG_SORT
-"Sort       [none]"
+"Sort"
 
-#MSG_SORT_TIME c=17 r=1
+#MSG_NONE
-"Sort       [time]"
+"None"
+
+#MSG_SORT_TIME
+"Time"
 
 #
 "Severe skew:"
 
-#MSG_SORT_ALPHA c=17 r=1
+#MSG_SORT_ALPHA
-"Sort   [alphabet]"
+"Alphabet"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
 
-#MSG_SOUND_LOUD c=17 r=1
+#MSG_SOUND_LOUD
-"Sound      [loud]"
+"Loud"
 
 #
 "Slight skew:"
 
-#MSG_SOUND_MUTE c=17 r=1
+#MSG_SOUND
-"Sound      [mute]"
+"Sound"
 
 #
 "Some problem encountered, Z-leveling enforced ..."
 
-#MSG_SOUND_ONCE c=17 r=1
+#MSG_SOUND_ONCE
-"Sound      [once]"
+"Once"
-
-#MSG_SOUND_SILENT c=17 r=1
-"Sound    [silent]"
 
 #MSG_SPEED
 "Speed"
@@ -778,18 +750,12 @@
 #
 "Select filament:"
 
-#MSG_TEMP_CALIBRATION c=20 r=1
+#MSG_TEMP_CALIBRATION c=12 r=1
-"Temp. cal.          "
+"Temp. cal."
-
-#MSG_TEMP_CALIBRATION_ON c=20 r=1
-"Temp. cal.   [on]"
 
 #
 "Select temperature which matches your material."
 
-#MSG_TEMP_CALIBRATION_OFF c=20 r=1
-"Temp. cal.  [off]"
-
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"
 
@@ -929,7 +895,10 @@
 "Y-correct:"
 
 #MSG_OFF
-" [off]"
+"Off"
+
+#MSG_ON
+"On"
 
 #
 "Back"
@@ -943,14 +912,14 @@
 #
 "FINDA:"
 
-#
+#MSG_FIRMWARE
-"Firmware   [none]"
+"Firmware"
 
-#
+#MSG_STRICT
-"Firmware [strict]"
+"Strict"
 
-#
+#MSG_WARN
-"Firmware   [warn]"
+"Warn"
 
 #
 "HW Setup"
@@ -958,20 +927,11 @@
 #
 "IR:"
 
-#
+#MSG_MAGNETS_COMP
-"Magnets comp.[N/A]"
+"Magnets comp."
 
-#
+#MSG_MESH
-"Magnets comp.[Off]"
+"Mesh"
-
-#
-"Magnets comp. [On]"
-
-#
-"Mesh         [3x3]"
-
-#
-"Mesh         [7x7]"
 
 #
 "Mesh bed leveling"
@@ -979,41 +939,17 @@
 #
 "MK3S firmware detected on MK3 printer"
 
-#
+#MSG_MMU_MODE
-"MMU Mode [Normal]"
+"MMU Mode"
-
-#
-"MMU Mode[Stealth]"
 
 #
 "Mode change in progress ..."
 
-#
+#MSG_MODEL
-"Model      [none]"
+"Model"
 
-#
+#MSG_NOZZLE_DIAMETER
-"Model    [strict]"
+"Nozzle d."
-
-#
-"Model      [warn]"
-
-#
-"Nozzle d.  [0.25]"
-
-#
-"Nozzle d.  [0.40]"
-
-#
-"Nozzle d.  [0.60]"
-
-#
-"Nozzle     [none]"
-
-#
-"Nozzle   [strict]"
-
-#
-"Nozzle     [warn]"
 
 #
 "G-code sliced for a different level. Continue?"
@@ -1060,8 +996,8 @@
 #
 "Sheet"
 
-#
+#MSG_SOUND_BLIND
-"Sound    [assist]"
+"Assist"
 
 #
 "Steel sheets"
@@ -1069,11 +1005,5 @@
 #
 "Z-correct:"
 
-#
+#MSG_Z_PROBE_NR
-"Z-probe nr.    [1]"
+"Z-probe nr."
-
-#
-"Z-probe nr.    [3]"
-
-#
-"Z-probe nr.    [5]"

lang/lang_en_cz.txt

@@ -50,18 +50,10 @@
 "Are left and right Z~carriages all up?"
 "Dojely oba Z voziky k~hornimu dorazu?"
 
-#MSG_AUTO_DEPLETE_ON c=17 r=1
+#MSG_AUTO_DEPLETE c=17 r=1
-"SpoolJoin    [on]"
+"SpoolJoin"
-"SpoolJoin   [zap]"
-
-#
-"SpoolJoin   [N/A]"
 "\x00"
 
-#MSG_AUTO_DEPLETE_OFF c=17 r=1
-"SpoolJoin   [off]"
-"SpoolJoin   [vyp]"
-
 #MSG_AUTO_HOME
 "Auto home"
 "\x00"
@@ -174,21 +166,13 @@
 "Copy selected language?"
 "Kopirovat vybrany jazyk?"
 
-#MSG_CRASHDETECT_ON
+#MSG_CRASHDETECT
-"Crash det.   [on]"
+"Crash det."
-"Crash det.  [zap]"
-
-#
-"Choose a filament for the First Layer Calibration and select it in the on-screen menu."
-"Zvolte filament pro kalibraci prvni vrstvy z nasledujiciho menu"
-
-#MSG_CRASHDETECT_NA
-"Crash det.  [N/A]"
 "\x00"
 
-#MSG_CRASHDETECT_OFF
+#
-"Crash det.  [off]"
+"Zvolte filament pro kalibraci prvni vrstvy z nasledujiciho menu"
-"Crash det.  [vyp]"
+"Choose a filament for the First Layer Calibration and select it in the on-screen menu."
 
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
@@ -274,17 +258,9 @@
 "Fail stats MMU"
 "Selhani MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
+#MSG_FSENSOR_AUTOLOAD
-"F. autoload  [on]"
+"F. autoload"
-"F. autozav. [zap]"
+"F. autozav."
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"F. autozav. [N/A]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"F. autozav. [vyp]"
 
 #
 "Fail stats"
@@ -298,25 +274,13 @@
 "Fan test"
 "Test ventilatoru"
 
-#MSG_FANS_CHECK_ON c=17 r=1
+#MSG_FANS_CHECK
-"Fans check   [on]"
+"Fans check"
-"Kontr. vent.[zap]"
+"Kontr. vent."
 
-#MSG_FANS_CHECK_OFF c=17 r=1
+#MSG_FSENSOR
-"Fans check  [off]"
+"Fil. sensor"
-"Kontr. vent.[vyp]"
+"Fil. senzor"
-
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Fil. senzor [zap]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Fil. senzor [N/A]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Fil. senzor [vyp]"
 
 #
 "Filam. runouts"
@@ -578,13 +542,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Pokracuji..."
 
-#MSG_STEALTH_MODE_OFF
+#MSG_MODE
-"Mode     [Normal]"
+"Mode"
-"Mod      [Normal]"
+"Mod"
 
-#MSG_SILENT_MODE_ON
+#MSG_NORMAL
-"Mode     [silent]"
+"Normal"
-"Mod       [tichy]"
+"\x00"
+
+#MSG_SILENT
+"Silent"
+"Tichy"
 
 #
 "MMU needs user attention."
@@ -594,17 +562,17 @@
 "MMU power fails"
 "MMU vypadky proudu"
 
-#MSG_STEALTH_MODE_ON
+#MSG_STEALTH
-"Mode    [Stealth]"
+"Stealth"
-"Mod       [tichy]"
+"Tichy"
 
-#MSG_AUTO_MODE_ON
+#MSG_AUTO_POWER
-"Mode [auto power]"
+"Auto power"
-"Mod [automaticky]"
+"Automaticky"
 
-#MSG_SILENT_MODE_OFF
+#MSG_HIGH_POWER
-"Mode [high power]"
+"High power"
-"Mod  [vys. vykon]"
+"Vys. vykon"
 
 #
 "MMU2 connected"
@@ -638,7 +606,7 @@
 "No SD card"
 "Zadna SD karta"
 
-#
+#MSG_NA
 "N/A"
 "\x00"
 
@@ -878,25 +846,21 @@
 "Right side[um]"
 "Vpravo [um]"
 
-#MSG_SECOND_SERIAL_ON c=17 r=1
+#MSG_RPI_PORT
-"RPi port     [on]"
+"RPi port"
-"RPi port    [zap]"
+"\x00"
-
-#MSG_SECOND_SERIAL_OFF c=17 r=1
-"RPi port    [off]"
-"RPi port    [vyp]"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
 "Spusteni Pruvodce vymaze ulozene vysledky vsech kalibraci a spusti kalibracni proces od zacatku. Pokracovat?"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
+#MSG_SD_CARD
-"SD card  [normal]"
+"SD card"
 "\x00"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
+#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY
-"SD card [flshAir]"
+"FlashAir"
-"SD card [FlshAir]"
+"\x00"
 
 #
 "Right"
@@ -958,49 +922,49 @@
 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
 "Nektere soubory nebudou setrideny. Maximalni pocet souboru ve slozce pro setrideni je 100."
 
-#MSG_SORT_NONE c=17 r=1
+#MSG_SORT
-"Sort       [none]"
+"Sort"
-"Trideni   [Zadne]"
+"Trideni"
 
-#MSG_SORT_TIME c=17 r=1
+#MSG_NONE
-"Sort       [time]"
+"None"
-"Trideni     [cas]"
+"Zadne"
+
+#MSG_SORT_TIME
+"Time"
+"Cas"
 
 #
 "Severe skew:"
 "Tezke zkoseni:"
 
-#MSG_SORT_ALPHA c=17 r=1
+#MSG_SORT_ALPHA
-"Sort   [alphabet]"
+"Alphabet"
-"Trideni [Abeceda]"
+"Abeceda"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
 "Trideni souboru"
 
-#MSG_SOUND_LOUD c=17 r=1
+#MSG_SOUND_LOUD
-"Sound      [loud]"
+"Loud"
-"Zvuk    [hlasity]"
+"Hlasity"
 
 #
 "Slight skew:"
 "Lehke zkoseni:"
 
-#MSG_SOUND_MUTE c=17 r=1
+#MSG_SOUND
-"Sound      [mute]"
+"Sound"
-"Zvuk    [vypnuto]"
+"Zvuk"
 
 #
 "Some problem encountered, Z-leveling enforced ..."
 "Vyskytl se problem, srovnavam osu Z ..."
 
-#MSG_SOUND_ONCE c=17 r=1
+#MSG_SOUND_ONCE
-"Sound      [once]"
+"Once"
-"Zvuk     [jednou]"
+"Jednou"
-
-#MSG_SOUND_SILENT c=17 r=1
-"Sound    [silent]"
-"Zvuk      [tichy]"
 
 #MSG_SPEED
 "Speed"
@@ -1038,22 +1002,14 @@
 "Select filament:"
 "Zvolte filament:"
 
-#MSG_TEMP_CALIBRATION c=20 r=1
+#MSG_TEMP_CALIBRATION c=12 r=1
-"Temp. cal.          "
+"Temp. cal."
-"Tepl. kal. "
+"Tepl. kal."
-
-#MSG_TEMP_CALIBRATION_ON c=20 r=1
-"Temp. cal.   [on]"
-"Tepl. kal.  [zap]"
 
 #
 "Select temperature which matches your material."
 "Zvolte teplotu, ktera odpovida vasemu materialu."
 
-#MSG_TEMP_CALIBRATION_OFF c=20 r=1
-"Temp. cal.  [off]"
-"Tepl. kal.  [vyp]"
-
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"
 "Teplot. kalibrace"
@@ -1232,15 +1188,19 @@
 
 #
 "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
-"\x00"
+"Tiskarna zacne tisknout lomenou caru. Otacenim tlacitka nastavte optimalni vysku. Postupujte podle obrazku v handbooku (kapitola Kalibrace)."
 
 #
 "Y-correct:"
 "Korekce Y:"
 
 #MSG_OFF
-" [off]"
+"Off"
-" [vyp]"
+"Vyp"
+
+#MSG_ON
+"On"
+"Zap"
 
 #
 "Back"
@@ -1258,17 +1218,17 @@
 "FINDA:"
 "\x00"
 
-#
+#MSG_FIRMWARE
-"Firmware   [none]"
+"Firmware"
-"Firmware  [Zadne]"
+"\x00"
 
-#
+#MSG_STRICT
-"Firmware [strict]"
+"Strict"
-"Firmware [Prisne]"
+"Prisne"
 
-#
+#MSG_WARN
-"Firmware   [warn]"
+"Warn"
-"Firmware[Varovat]"
+"Varovat"
 
 #
 "HW Setup"
@@ -1278,25 +1238,13 @@
 "IR:"
 "\x00"
 
-#
+#MSG_MAGNETS_COMP
-"Magnets comp.[N/A]"
+"Magnets comp."
-"Komp. magnetu[N/A]"
+"Komp. magnetu"
 
-#
+#MSG_MESH
-"Magnets comp.[Off]"
+"Mesh"
-"Komp. magnetu[Vyp]"
+"\x00"
-
-#
-"Magnets comp. [On]"
-"Komp. magnetu[Zap]"
-
-#
-"Mesh         [3x3]"
-"Mesh         [3x3]"
-
-#
-"Mesh         [7x7]"
-"Mesh         [7x7]"
 
 #
 "Mesh bed leveling"
@@ -1306,53 +1254,21 @@
 "MK3S firmware detected on MK3 printer"
 "MK3S firmware detekovan na tiskarne MK3"
 
-#
+#MSG_MMU_MODE
-"MMU Mode [Normal]"
+"MMU Mode"
-"MMU mod  [Normal]"
+"MMU mod"
-
-#
-"MMU Mode[Stealth]"
-"MMU Mod   [Tichy]"
 
 #
 "Mode change in progress ..."
 "Probiha zmena modu..."
 
-#
+#MSG_MODEL
-"Model      [none]"
+"Model"
-"Model     [Zadne]"
+"\x00"
 
-#
+#MSG_NOZZLE_DIAMETER
-"Model    [strict]"
+"Nozzle d."
-"Model    [Prisne]"
+"Tryska"
-
-#
-"Model      [warn]"
-"Model   [Varovat]"
-
-#
-"Nozzle d.  [0.25]"
-"Tryska     [0.25]"
-
-#
-"Nozzle d.  [0.40]"
-"Tryska     [0.40]"
-
-#
-"Nozzle d.  [0.60]"
-"Tryska     [0.60]"
-
-#
-"Nozzle     [none]"
-"Tryska    [Zadne]"
-
-#
-"Nozzle   [strict]"
-"Tryska   [Prisne]"
-
-#
-"Nozzle     [warn]"
-"Tryska  [Varovat]"
 
 #
 "G-code sliced for a different level. Continue?"
@@ -1414,9 +1330,9 @@
 "Sheet"
 "Plat"
 
-#
+#MSG_SOUND_BLIND
-"Sound    [assist]"
+"Assist"
-"Zvuk     [Asist.]"
+"Asist."
 
 #
 "Steel sheets"
@@ -1426,14 +1342,6 @@
 "Z-correct:"
 "Korekce Z:"
 
-#
+#MSG_Z_PROBE_NR
-"Z-probe nr.    [1]"
+"Z-probe nr."
-"Pocet mereni Z [1]"
+"Pocet mereni Z"
-
-#
-"Z-probe nr.    [3]"
-"Pocet mereni Z [3]"
-
-#
-"Z-probe nr.    [5]"
-"Pocet mereni Z [5]"

lang/lang_en_de.txt

@@ -50,17 +50,9 @@
 "Are left and right Z~carriages all up?"
 "Sind linke+rechte Z- Schlitten ganz oben?"
 
-#MSG_AUTO_DEPLETE_ON c=17 r=1
+#MSG_AUTO_DEPLETE c=17 r=1
-"SpoolJoin    [on]"
+"SpoolJoin"
-"SpoolJoin    [an]"
+"\x00"
-
-#
-"SpoolJoin   [N/A]"
-"SpoolJoin   [N/V]"
-
-#MSG_AUTO_DEPLETE_OFF c=17 r=1
-"SpoolJoin   [off]"
-"SpoolJoin   [aus]"
 
 #MSG_AUTO_HOME
 "Auto home"
@@ -174,22 +166,14 @@
 "Copy selected language?"
 "Gewaehlte Sprache kopieren?"
 
-#MSG_CRASHDETECT_ON
+#MSG_CRASHDETECT
-"Crash det.   [on]"
+"Crash det."
-"Crash Erk.   [an]"
+"Crash Erk."
 
 #
 "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
 "Waehlen Sie ein Filament fuer Erste Schichtkalibrierung aus und waehlen Sie es im On-Screen-Menu aus."
 
-#MSG_CRASHDETECT_NA
-"Crash det.  [N/A]"
-"Crash Erk.   [nv]"
-
-#MSG_CRASHDETECT_OFF
-"Crash det.  [off]"
-"Crash Erk.  [aus]"
-
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
 "Crash erkannt."
@@ -274,17 +258,9 @@
 "Fail stats MMU"
 "MMU-Fehler"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
+#MSG_FSENSOR_AUTOLOAD
-"F. autoload  [on]"
+"F. autoload"
-"F.Autoladen  [an]"
+"F. autoladen"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"F. Autoload  [nv]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"F. Autoload [aus]"
 
 #
 "Fail stats"
@@ -298,25 +274,13 @@
 "Fan test"
 "Lueftertest"
 
-#MSG_FANS_CHECK_ON c=17 r=1
+#MSG_FANS_CHECK
-"Fans check   [on]"
+"Fans check"
-"Luefter Chk. [an]"
+"Luefter Chk."
 
-#MSG_FANS_CHECK_OFF c=17 r=1
+#MSG_FSENSOR
-"Fans check  [off]"
+"Fil. sensor"
-"Luefter Chk.[aus]"
+"\x00"
-
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Fil. Sensor  [an]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Fil. Sensor  [nv]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Fil. Sensor [aus]"
 
 #
 "Filam. runouts"
@@ -578,13 +542,17 @@
 "MMU OK. Resuming..."
 "MMU OK.  Weiterdrucken..."
 
-#MSG_STEALTH_MODE_OFF
+#MSG_MODE
-"Mode     [Normal]"
+"Mode"
-"Modus    [Normal]"
+"Modus"
 
-#MSG_SILENT_MODE_ON
+#MSG_NORMAL
-"Mode     [silent]"
+"Normal"
-"Modus     [leise]"
+"\x00"
+
+#MSG_SILENT
+"Silent"
+"Leise"
 
 #
 "MMU needs user attention."
@@ -594,17 +562,17 @@
 "MMU power fails"
 "MMU Netzfehler"
 
-#MSG_STEALTH_MODE_ON
+#MSG_STEALTH
-"Mode    [Stealth]"
+"Stealth"
-"Modus   [Stealth]"
+"\x00"
 
-#MSG_AUTO_MODE_ON
+#MSG_AUTO_POWER
-"Mode [auto power]"
+"Auto power"
-"Modus[Auto Power]"
+"\x00"
 
-#MSG_SILENT_MODE_OFF
+#MSG_HIGH_POWER
-"Mode [high power]"
+"High power"
-"Modus[Hohe Leist]"
+"Hohe leist"
 
 #
 "MMU2 connected"
@@ -638,9 +606,9 @@
 "No SD card"
 "Keine SD Karte"
 
-#
+#MSG_NA
 "N/A"
-"N.V."
+"N/V"
 
 #MSG_NO
 "No"
@@ -878,25 +846,21 @@
 "Right side[um]"
 "Rechts [um]"
 
-#MSG_SECOND_SERIAL_ON c=17 r=1
+#MSG_RPI_PORT
-"RPi port     [on]"
+"RPi port"
-"RPi Port     [an]"
+"\x00"
-
-#MSG_SECOND_SERIAL_OFF c=17 r=1
-"RPi port    [off]"
-"RPi Port    [aus]"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
 "Der Assistent wird die aktuellen Kalibrierungsdaten loeschen und von vorne beginnen. Weiterfahren?"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
+#MSG_SD_CARD
-"SD card  [normal]"
+"SD card"
-"SD Karte [normal]"
+"SD Karte"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
+#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY
-"SD card [flshAir]"
+"FlashAir"
-"SD Karte[flshAir]"
+"\x00"
 
 #
 "Right"
@@ -958,49 +922,49 @@
 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
 "Einige Dateien wur- den nicht sortiert. Max. Dateien pro Verzeichnis = 100."
 
-#MSG_SORT_NONE c=17 r=1
+#MSG_SORT
-"Sort       [none]"
+"Sort"
-"Sort.      [ohne]"
+"Sort."
 
-#MSG_SORT_TIME c=17 r=1
+#MSG_NONE
-"Sort       [time]"
+"None"
-"Sort.      [Zeit]"
+"Ohne"
+
+#MSG_SORT_TIME
+"Time"
+"Zeit"
 
 #
 "Severe skew:"
 "Schwer.Schr:"
 
-#MSG_SORT_ALPHA c=17 r=1
+#MSG_SORT_ALPHA
-"Sort   [alphabet]"
+"Alphabet"
-"Sort.  [Alphabet]"
+"\x00"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
 "Sortiere Dateien"
 
-#MSG_SOUND_LOUD c=17 r=1
+#MSG_SOUND_LOUD
-"Sound      [loud]"
+"Loud"
-"Sound      [laut]"
+"Laut"
 
 #
 "Slight skew:"
 "Leicht.Schr:"
 
-#MSG_SOUND_MUTE c=17 r=1
+#MSG_SOUND
-"Sound      [mute]"
+"Sound"
-"Sound     [stumm]"
+"\x00"
 
 #
 "Some problem encountered, Z-leveling enforced ..."
 "Fehler aufgetreten, Z-Kalibrierung erforderlich..."
 
-#MSG_SOUND_ONCE c=17 r=1
+#MSG_SOUND_ONCE
-"Sound      [once]"
+"Once"
-"Sound    [einmal]"
+"Einmal"
-
-#MSG_SOUND_SILENT c=17 r=1
-"Sound    [silent]"
-"Sound     [leise]"
 
 #MSG_SPEED
 "Speed"
@@ -1038,22 +1002,14 @@
 "Select filament:"
 "Filament auswaehlen:"
 
-#MSG_TEMP_CALIBRATION c=20 r=1
+#MSG_TEMP_CALIBRATION c=12 r=1
-"Temp. cal.          "
+"Temp. cal."
-"Temp Kalib.         "
+"Temp Kalib."
-
-#MSG_TEMP_CALIBRATION_ON c=20 r=1
-"Temp. cal.   [on]"
-"Temp. Kal.   [an]"
 
 #
 "Select temperature which matches your material."
 "Waehlen Sie die Temperatur, die zu Ihrem Material passt."
 
-#MSG_TEMP_CALIBRATION_OFF c=20 r=1
-"Temp. cal.  [off]"
-"Temp. Kal.  [aus]"
-
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"
 "Temp. kalibrieren"
@@ -1232,15 +1188,19 @@
 
 #
 "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
-"\x00"
+"Der Drucker beginnt mit dem Drucken einer Zickzacklinie. Drehen Sie den Knopf, bis Sie die optimale Hoehe erreicht haben. Ueberpruefen Sie die Bilder im Handbuch (Kapitel Kalibrierung)."
 
 #
 "Y-correct:"
 "Y-Korrektur:"
 
 #MSG_OFF
-" [off]"
+"Off"
-" [aus]"
+"Aus"
+
+#MSG_ON
+"On"
+"An"
 
 #
 "Back"
@@ -1258,17 +1218,17 @@
 "FINDA:"
 "\x00"
 
-#
+#MSG_FIRMWARE
-"Firmware   [none]"
+"Firmware"
-"Firmware   [ohne]"
+"\x00"
 
-#
+#MSG_STRICT
-"Firmware [strict]"
+"Strict"
-"Firmware [strikt]"
+"Strikt"
 
-#
+#MSG_WARN
-"Firmware   [warn]"
+"Warn"
-"Firmware [warnen]"
+"Warnen"
 
 #
 "HW Setup"
@@ -1278,25 +1238,13 @@
 "IR:"
 "\x00"
 
-#
+#MSG_MAGNETS_COMP
-"Magnets comp.[N/A]"
+"Magnets comp."
-"Magnet Komp.  [nv]"
+"Magnet Komp."
 
-#
+#MSG_MESH
-"Magnets comp.[Off]"
+"Mesh"
-"Magnet Komp. [Aus]"
+"Gitter"
-
-#
-"Magnets comp. [On]"
-"Magnet Komp.  [An]"
-
-#
-"Mesh         [3x3]"
-"Gitter       [3x3]"
-
-#
-"Mesh         [7x7]"
-"Gitter       [7x7]"
 
 #
 "Mesh bed leveling"
@@ -1306,53 +1254,21 @@
 "MK3S firmware detected on MK3 printer"
 "MK3S-Firmware auf MK3-Drucker erkannt"
 
-#
+#MSG_MMU_MODE
-"MMU Mode [Normal]"
+"MMU Mode"
-"MMU Modus[Normal]"
+"MMU Modus"
-
-#
-"MMU Mode[Stealth]"
-"MMU Mod.[Stealth]"
 
 #
 "Mode change in progress ..."
 "Moduswechsel erfolgt..."
 
-#
+#MSG_MODEL
-"Model      [none]"
+"Model"
-"Modell     [ohne]"
+"Modell"
 
-#
+#MSG_NOZZLE_DIAMETER
-"Model    [strict]"
+"Nozzle d."
-"Modell   [strikt]"
+"Duese D."
-
-#
-"Model      [warn]"
-"Modell   [warnen]"
-
-#
-"Nozzle d.  [0.25]"
-"Duese D.   [0.25]"
-
-#
-"Nozzle d.  [0.40]"
-"Duese D.   [0.40]"
-
-#
-"Nozzle d.  [0.60]"
-"Duese D.   [0.60]"
-
-#
-"Nozzle     [none]"
-"Duese      [ohne]"
-
-#
-"Nozzle   [strict]"
-"Duese    [strikt]"
-
-#
-"Nozzle     [warn]"
-"Duese    [warnen]"
 
 #
 "G-code sliced for a different level. Continue?"
@@ -1414,9 +1330,9 @@
 "Sheet"
 "Blech"
 
-#
+#MSG_SOUND_BLIND
-"Sound    [assist]"
+"Assist"
-"Sound    [Assist]"
+"\x00"
 
 #
 "Steel sheets"
@@ -1426,14 +1342,6 @@
 "Z-correct:"
 "Z-Korrektur:"
 
-#
+#MSG_Z_PROBE_NR
-"Z-probe nr.    [1]"
+"Z-probe nr."
-"Z-Probe Nr.    [1]"
+"\x00"
-
-#
-"Z-probe nr.    [3]"
-"Z-Probe Nr.    [3]"
-
-#
-"Z-probe nr.    [5]"
-"Z-Probe Nr.    [5]"

lang/lang_en_es.txt

@@ -50,16 +50,8 @@
 "Are left and right Z~carriages all up?"
 "Carros Z izq./der. estan arriba maximo?"
 
-#MSG_AUTO_DEPLETE_ON c=17 r=1
+#MSG_AUTO_DEPLETE c=17 r=1
-"SpoolJoin    [on]"
+"SpoolJoin"
-"\x00"
-
-#
-"SpoolJoin   [N/A]"
-"\x00"
-
-#MSG_AUTO_DEPLETE_OFF c=17 r=1
-"SpoolJoin   [off]"
 "\x00"
 
 #MSG_AUTO_HOME
@@ -174,22 +166,14 @@
 "Copy selected language?"
 "Copiar idioma seleccionado?"
 
-#MSG_CRASHDETECT_ON
+#MSG_CRASHDETECT
-"Crash det.   [on]"
+"Crash det."
-"Det. choque [act]"
+"Det. choque"
 
 #
 "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
 "Escoge un filamento para la Calibracion de la Primera Capa y seleccionalo en el menu en pantalla."
 
-#MSG_CRASHDETECT_NA
-"Crash det.  [N/A]"
-"Dec. choque [N/D]"
-
-#MSG_CRASHDETECT_OFF
-"Crash det.  [off]"
-"Det. choque [ina]"
-
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
 "Choque detectado."
@@ -274,17 +258,9 @@
 "Fail stats MMU"
 "Estadistica de fallos MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
+#MSG_FSENSOR_AUTOLOAD
-"F. autoload  [on]"
+"F. autoload"
-"Autocarg.Fil[act]"
+"Autocarg.fil."
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"Autocarg.Fil[N/D]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"Autocarg.Fil[ina]"
 
 #
 "Fail stats"
@@ -298,25 +274,13 @@
 "Fan test"
 "Test ventiladores"
 
-#MSG_FANS_CHECK_ON c=17 r=1
+#MSG_FANS_CHECK
-"Fans check   [on]"
+"Fans check"
-"Comprob.vent[act]"
+"Comprob.vent"
 
-#MSG_FANS_CHECK_OFF c=17 r=1
+#MSG_FSENSOR
-"Fans check  [off]"
+"Fil. sensor"
-"Comprob.vent[ina]"
+"Sensor Fil."
-
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Sensor Fil. [act]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Sensor Fil. [N/D]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Sensor Fil. [ina]"
 
 #
 "Filam. runouts"
@@ -578,13 +542,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Resumiendo..."
 
-#MSG_STEALTH_MODE_OFF
+#MSG_MODE
-"Mode     [Normal]"
+"Mode"
-"Modo     [Normal]"
+"Modo"
 
-#MSG_SILENT_MODE_ON
+#MSG_NORMAL
-"Mode     [silent]"
+"Normal"
-"Modo   [silencio]"
+"\x00"
+
+#MSG_SILENT
+"Silent"
+"Silencio"
 
 #
 "MMU needs user attention."
@@ -594,17 +562,17 @@
 "MMU power fails"
 "Fallo de energia en MMU"
 
-#MSG_STEALTH_MODE_ON
+#MSG_STEALTH
-"Mode    [Stealth]"
+"Stealth"
-"Modo   [Silencio]"
+"Silencio"
 
-#MSG_AUTO_MODE_ON
+#MSG_AUTO_POWER
-"Mode [auto power]"
+"Auto power"
-"Modo[fuerza auto]"
+"Fuerza auto"
 
-#MSG_SILENT_MODE_OFF
+#MSG_HIGH_POWER
-"Mode [high power]"
+"High power"
-"Modo [rend.pleno]"
+"Rend.pleno"
 
 #
 "MMU2 connected"
@@ -638,7 +606,7 @@
 "No SD card"
 "No hay tarjeta SD"
 
-#
+#MSG_NA
 "N/A"
 "N/A"
 
@@ -878,25 +846,21 @@
 "Right side[um]"
 "Derecha [um]"
 
-#MSG_SECOND_SERIAL_ON c=17 r=1
+#MSG_RPI_PORT
-"RPi port     [on]"
+"RPi port"
-"Puerto RPi  [act]"
+"Puerto RPi"
-
-#MSG_SECOND_SERIAL_OFF c=17 r=1
-"RPi port    [off]"
-"Puerto RPi  [ina]"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
 "Ejecutar el Wizard borrara los valores de calibracion actuales y comenzara de nuevo. Continuar?"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
+#MSG_SD_CARD
-"SD card  [normal]"
+"SD card"
-"Tarj. SD [normal]"
+"Tarj. SD"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
+#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY
-"SD card [flshAir]"
+"FlashAir"
-"Tarj. SD[FlshAir]"
+"\x00"
 
 #
 "Right"
@@ -958,49 +922,49 @@
 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
 "Algunos archivos no se ordenaran. Maximo 100 archivos por carpeta para ordenar. "
 
-#MSG_SORT_NONE c=17 r=1
+#MSG_SORT
-"Sort       [none]"
+"Sort"
-"Ordenar [ninguno]"
+"Ordenar"
 
-#MSG_SORT_TIME c=17 r=1
+#MSG_NONE
-"Sort       [time]"
+"None"
-"Ordenar   [fecha]"
+"Ninguno"
+
+#MSG_SORT_TIME
+"Time"
+"Fecha"
 
 #
 "Severe skew:"
 "Incl.severa:"
 
-#MSG_SORT_ALPHA c=17 r=1
+#MSG_SORT_ALPHA
-"Sort   [alphabet]"
+"Alphabet"
-"Ordenar [alfabet]"
+"Alfabet"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
 "Ordenando archivos"
 
-#MSG_SOUND_LOUD c=17 r=1
+#MSG_SOUND_LOUD
-"Sound      [loud]"
+"Loud"
-"Sonido     [alto]"
+"Alto"
 
 #
 "Slight skew:"
 "Liger.incl.:"
 
-#MSG_SOUND_MUTE c=17 r=1
+#MSG_SOUND
-"Sound      [mute]"
+"Sound"
-"Sonido[silenciad]"
+"Sonido"
 
 #
 "Some problem encountered, Z-leveling enforced ..."
 "Problema encontrado, nivelacion Z forzosa ..."
 
-#MSG_SOUND_ONCE c=17 r=1
+#MSG_SOUND_ONCE
-"Sound      [once]"
+"Once"
-"Sonido  [una vez]"
+"Una vez"
-
-#MSG_SOUND_SILENT c=17 r=1
-"Sound    [silent]"
-"Sonido[silencios]"
 
 #MSG_SPEED
 "Speed"
@@ -1038,22 +1002,14 @@
 "Select filament:"
 "Selecciona filamento:"
 
-#MSG_TEMP_CALIBRATION c=20 r=1
+#MSG_TEMP_CALIBRATION c=12 r=1
-"Temp. cal.          "
+"Temp. cal."
-"Cal. temp. "
+"Cal. temp."
-
-#MSG_TEMP_CALIBRATION_ON c=20 r=1
-"Temp. cal.   [on]"
-"Cal. temp.   [on]"
 
 #
 "Select temperature which matches your material."
 "Selecciona la temperatura adecuada a tu material."
 
-#MSG_TEMP_CALIBRATION_OFF c=20 r=1
-"Temp. cal.  [off]"
-"Cal. temp.  [off]"
-
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"
 "Calibracion temp."
@@ -1232,15 +1188,19 @@
 
 #
 "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
-"\x00"
+"La impresora comenzara a imprimir una linea en zig-zag. Gira el dial hasta que la linea alcance la altura optima. Mira las fotos del manual (Capitulo de calibracion)."
 
 #
 "Y-correct:"
 "Corregir-Y:"
 
 #MSG_OFF
-" [off]"
+"Off"
-"[apag]"
+"Ina"
+
+#MSG_ON
+"On"
+"Act"
 
 #
 "Back"
@@ -1258,17 +1218,17 @@
 "FINDA:"
 "FINDA:"
 
-#
+#MSG_FIRMWARE
-"Firmware   [none]"
+"Firmware"
-"Firmware[ninguno]"
+"\x00"
 
-#
+#MSG_STRICT
-"Firmware [strict]"
+"Strict"
-"Firmware[estrict]"
+"Estrict"
 
-#
+#MSG_WARN
-"Firmware   [warn]"
+"Warn"
-"Firmware  [aviso]"
+"Aviso"
 
 #
 "HW Setup"
@@ -1278,25 +1238,13 @@
 "IR:"
 "\x00"
 
-#
+#MSG_MAGNETS_COMP
-"Magnets comp.[N/A]"
+"Magnets comp."
-"Comp. imanes [N/A]"
+"Comp. imanes"
 
-#
+#MSG_MESH
-"Magnets comp.[Off]"
+"Mesh"
-"Comp. imanes [Off]"
+"Malla"
-
-#
-"Magnets comp. [On]"
-"Comp. imanes  [On]"
-
-#
-"Mesh         [3x3]"
-"Malla        [3x3]"
-
-#
-"Mesh         [7x7]"
-"Malla        [7x7]"
 
 #
 "Mesh bed leveling"
@@ -1306,53 +1254,21 @@
 "MK3S firmware detected on MK3 printer"
 "Firmware MK3S detectado en impresora MK3"
 
-#
+#MSG_MMU_MODE
-"MMU Mode [Normal]"
+"MMU Mode"
-"Modo MMU [Normal]"
+"Modo MMU"
-
-#
-"MMU Mode[Stealth]"
-"Modo MMU[Silenci]"
 
 #
 "Mode change in progress ..."
 "Cambio de modo progresando ..."
 
-#
+#MSG_MODEL
-"Model      [none]"
+"Model"
-"Modelo  [ninguno]"
+"Modelo"
 
-#
+#MSG_NOZZLE_DIAMETER
-"Model    [strict]"
+"Nozzle d."
-"Modelo [estricto]"
+"Diam. nozzl"
-
-#
-"Model      [warn]"
-"Modelo    [aviso]"
-
-#
-"Nozzle d.  [0.25]"
-"Diam. nozzl[0.25]"
-
-#
-"Nozzle d.  [0.40]"
-"Diam. nozzl[0.40]"
-
-#
-"Nozzle d.  [0.60]"
-"Diam. nozzl[0.60]"
-
-#
-"Nozzle     [none]"
-"Nozzle  [ninguno]"
-
-#
-"Nozzle   [strict]"
-"Nozzle [estricto]"
-
-#
-"Nozzle     [warn]"
-"Nozzle    [aviso]"
 
 #
 "G-code sliced for a different level. Continue?"
@@ -1414,9 +1330,9 @@
 "Sheet"
 "Lamina"
 
-#
+#MSG_SOUND_BLIND
-"Sound    [assist]"
+"Assist"
-"Sonido [asistido]"
+"Asistido"
 
 #
 "Steel sheets"
@@ -1426,14 +1342,6 @@
 "Z-correct:"
 "Corregir-Z:"
 
-#
+#MSG_Z_PROBE_NR
-"Z-probe nr.    [1]"
+"Z-probe nr."
-"Z-sensor nr.   [1]"
+"Z-sensor nr."
-
-#
-"Z-probe nr.    [3]"
-"Z-sensor nr.   [3]"
-
-#
-"Z-probe nr.    [5]"
-"Z-sensor nr.   [5]"

lang/lang_en_fr.txt

@@ -50,16 +50,8 @@
 "Are left and right Z~carriages all up?"
 "Z~carriages gauche + droite tout en haut?"
 
-#MSG_AUTO_DEPLETE_ON c=17 r=1
+#MSG_AUTO_DEPLETE c=17 r=1
-"SpoolJoin    [on]"
+"SpoolJoin"
-"\x00"
-
-#
-"SpoolJoin   [N/A]"
-"\x00"
-
-#MSG_AUTO_DEPLETE_OFF c=17 r=1
-"SpoolJoin   [off]"
 "\x00"
 
 #MSG_AUTO_HOME
@@ -174,22 +166,14 @@
 "Copy selected language?"
 "Copier la langue selectionne?"
 
-#MSG_CRASHDETECT_ON
+#MSG_CRASHDETECT
-"Crash det.   [on]"
+"Crash det."
-"Detect.crash [on]"
+"Detect.crash"
 
 #
 "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
 "Choisissez un filament pour la Calibration de la Premiere Couche et selectionnez-le depuis le menu a l'ecran."
 
-#MSG_CRASHDETECT_NA
-"Crash det.  [N/A]"
-"Detect.crash[N/A]"
-
-#MSG_CRASHDETECT_OFF
-"Crash det.  [off]"
-"Detect.crash[off]"
-
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
 "Crash detecte."
@@ -274,18 +258,9 @@
 "Fail stats MMU"
 "Stat. d'echec MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
+#MSG_FSENSOR_AUTOLOAD
-"F. autoload  [on]"
+"F. autoload"
-"Autochargeur [on]"
+"Autochargeur"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"Autochargeur[N/A]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"Autochargeur[off]"
-
 #
 "Fail stats"
 "Stat. d'echec"
@@ -298,26 +273,13 @@
 "Fan test"
 "Test du ventilateur"
 
-#MSG_FANS_CHECK_ON c=17 r=1
+#MSG_FANS_CHECK
-"Fans check   [on]"
+"Fans check"
-"Verif vent.  [on]"
+"Verif vent."
-
-#MSG_FANS_CHECK_OFF c=17 r=1
-"Fans check  [off]"
-"Verif vent. [off]"
-
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Capteur Fil. [on]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Capteur Fil.[N/A]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Capteur Fil.[off]"
 
+#MSG_FSENSOR
+"Fil. sensor"
+"Capteur Fil."
 #
 "Filam. runouts"
 "Fins de filament"
@@ -578,13 +540,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Reprise ..."
 
-#MSG_STEALTH_MODE_OFF
+#MSG_MODE
-"Mode     [Normal]"
+"Mode"
 "\x00"
 
-#MSG_SILENT_MODE_ON
+#MSG_NORMAL
-"Mode     [silent]"
+"Normal"
-"Mode     [feutre]"
+"\x00"
+
+#MSG_SILENT
+"Silent"
+"Feutre"
 
 #
 "MMU needs user attention."
@@ -594,17 +560,17 @@
 "MMU power fails"
 "Echecs alim. MMU"
 
-#MSG_STEALTH_MODE_ON
+#MSG_STEALTH
-"Mode    [Stealth]"
+"Stealth"
-"Mode     [furtif]"
+"Furtif"
 
-#MSG_AUTO_MODE_ON
+#MSG_AUTO_POWER
-"Mode [auto power]"
+"Auto power"
-"Mode [puiss.auto]"
+"Puiss.auto"
 
-#MSG_SILENT_MODE_OFF
+#MSG_HIGH_POWER
-"Mode [high power]"
+"High power"
-"Mode[haute puiss]"
+"Haute puiss"
 
 #
 "MMU2 connected"
@@ -638,7 +604,7 @@
 "No SD card"
 "Pas de carte SD"
 
-#
+#MSG_NA
 "N/A"
 "\x00"
 
@@ -878,25 +844,21 @@
 "Right side[um]"
 "Droite [um]"
 
-#MSG_SECOND_SERIAL_ON c=17 r=1
+#MSG_RPI_PORT
-"RPi port     [on]"
+"RPi port"
-"Port RPi     [on]"
+"Port RPi"
-
-#MSG_SECOND_SERIAL_OFF c=17 r=1
-"RPi port    [off]"
-"Port RPi    [off]"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
 "Lancement de l'Assistant supprimera les resultats actuels de calibration et commencera du debut. Continuer?"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
+#MSG_SD_CARD
-"SD card  [normal]"
+"SD card"
-"Carte SD [normal]"
+"Carte SD"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
+#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY
-"SD card [flshAir]"
+"FlashAir"
-"Carte SD[flshAir]"
+"FlshAir"
 
 #
 "Right"
@@ -958,50 +920,49 @@
 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
 "Certains fichiers ne seront pas tries. Max 100 fichiers tries par dossier."
 
-#MSG_SORT_NONE c=17 r=1
+#MSG_SORT
-"Sort       [none]"
+"Sort"
-"Tri       [aucun]"
+"Tri"
 
-#MSG_SORT_TIME c=17 r=1
+#MSG_NONE
-"Sort       [time]"
+"None"
-"Tri       [heure]"
+"Aucun"
+
+#MSG_SORT_TIME
+"Time"
+"Heure"
 
 #
 "Severe skew:"
 "Deviat.sev.:"
 
-#MSG_SORT_ALPHA c=17 r=1
+#MSG_SORT_ALPHA
-"Sort   [alphabet]"
+"Alphabet"
-"Tri    [alphabet]"
+"\x00"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
 "Tri des fichiers"
 
-#MSG_SOUND_LOUD c=17 r=1
+#MSG_SOUND_LOUD
-"Sound      [loud]"
+"Loud"
-"Son        [fort]"
+"Fort"
 
 #
 "Slight skew:"
 "Deviat.leg.:"
 
-#MSG_SOUND_MUTE c=17 r=1
+#MSG_SOUND
-"Sound      [mute]"
+"Sound"
-"Son        [muet]"
+"Son"
 
 #
 "Some problem encountered, Z-leveling enforced ..."
 "Probleme rencontre, cliquez sur le bouton pour niveller l'axe Z..."
 
-#MSG_SOUND_ONCE c=17 r=1
+#MSG_SOUND_ONCE
-"Sound      [once]"
+"Once"
-"Son    [une fois]"
+"Une fois"
-
-#MSG_SOUND_SILENT c=17 r=1
-"Sound    [silent]"
-"Son      [feutre]"
-
 #MSG_SPEED
 "Speed"
 "Vitesse"
@@ -1038,22 +999,14 @@
 "Select filament:"
 "Selectionnez le filament:"
 
-#MSG_TEMP_CALIBRATION c=20 r=1
+#MSG_TEMP_CALIBRATION c=12 r=1
-"Temp. cal.          "
+"Temp. cal."
 "Calib. Temp."
 
-#MSG_TEMP_CALIBRATION_ON c=20 r=1
-"Temp. cal.   [on]"
-"Calib. Temp. [on]"
-
 #
 "Select temperature which matches your material."
 "Selectionnez la temperature qui correspond a votre materiau."
 
-#MSG_TEMP_CALIBRATION_OFF c=20 r=1
-"Temp. cal.  [off]"
-"Calib. Temp.[off]"
-
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"
 "Calibration temp."
@@ -1232,15 +1185,19 @@
 
 #
 "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
-"\x00"
+"L'imprimante commencera a  imprimer une ligne en zig-zag. Tournez le bouton jusqu'a atteindre la hauteur optimale. Consultez les photos dans le manuel (chapitre Calibration)."
 
 #
 "Y-correct:"
 "Correct-Y:"
 
 #MSG_OFF
-" [off]"
+"Off"
-" [off]"
+"\x00"
+
+#MSG_ON
+"On"
+"\x00"
 
 #
 "Back"
@@ -1258,17 +1215,17 @@
 "FINDA:"
 "FINDA:"
 
-#
+#MSG_FIRMWARE
-"Firmware   [none]"
+"Firmware"
-"Firmware [aucune]"
+"\x00"
 
-#
+#MSG_STRICT
-"Firmware [strict]"
+"Strict"
-"Firmware[stricte]"
+"Stricte"
 
-#
+#MSG_WARN
-"Firmware   [warn]"
+"Warn"
-"Firmware  [avert]"
+"Avert"
 
 #
 "HW Setup"
@@ -1278,24 +1235,12 @@
 "IR:"
 "IR:"
 
-#
+#MSG_MAGNETS_COMP
-"Magnets comp.[N/A]"
+"Magnets comp."
-"Compens. aim.[N/A]"
+"Compens. aim."
 
-#
+#MSG_MESH
-"Magnets comp.[Off]"
+"Mesh"
-"Compens. aim.[off]"
-
-#
-"Magnets comp. [On]"
-"Compens. aim. [on]"
-
-#
-"Mesh         [3x3]"
-"\x00"
-
-#
-"Mesh         [7x7]"
 "\x00"
 
 #
@@ -1306,53 +1251,21 @@
 "MK3S firmware detected on MK3 printer"
 "Firmware MK3S detecte sur imprimante MK3"
 
-#
+#MSG_MMU_MODE
-"MMU Mode [Normal]"
+"MMU Mode"
-"Mode MMU [normal]"
+"Mode MMU"
-
-#
-"MMU Mode[Stealth]"
-"Mode MMU [feutre]"
 
 #
 "Mode change in progress ..."
 "Changement de mode en cours..."
 
-#
+#MSG_MODEL
-"Model      [none]"
+"Model"
-"Modele   [aucune]"
+"Modele"
 
-#
+#MSG_NOZZLE_DIAMETER
-"Model    [strict]"
+"Nozzle d."
-"Modele  [stricte]"
+"Diam. buse"
-
-#
-"Model      [warn]"
-"Modele    [avert]"
-
-#
-"Nozzle d.  [0.25]"
-"Diam. buse [0.25]"
-
-#
-"Nozzle d.  [0.40]"
-"Diam. buse [0.40]"
-
-#
-"Nozzle d.  [0.60]"
-"Diam. buse [0.60]"
-
-#
-"Nozzle     [none]"
-"Buse     [aucune]"
-
-#
-"Nozzle   [strict]"
-"Buse    [stricte]"
-
-#
-"Nozzle     [warn]"
-"Buse      [avert]"
 
 #
 "G-code sliced for a different level. Continue?"
@@ -1414,9 +1327,9 @@
 "Sheet"
 "Plaque"
 
-#
+#MSG_SOUND_BLIND
-"Sound    [assist]"
+"Assist"
-"Son      [assist]"
+"\x00"
 
 #
 "Steel sheets"
@@ -1426,15 +1339,6 @@
 "Z-correct:"
 "Correct-Z:"
 
-#
+#MSG_Z_PROBE_NR
-"Z-probe nr.    [1]"
+"Z-probe nr."
-"Mesurer x-fois [1]"
+"Mesurer x-fois"
-
-#
-"Z-probe nr.    [3]"
-"Mesurer x-fois [3]"
-
-#
-"Z-probe nr.    [5]"
-"Mesurer x-fois [5]"
- 

lang/lang_en_it.txt

@@ -50,16 +50,8 @@
 "Are left and right Z~carriages all up?"
 "I carrelli Z sin/des sono altezza max?"
 
-#MSG_AUTO_DEPLETE_ON c=17 r=1
+#MSG_AUTO_DEPLETE c=17 r=1
-"SpoolJoin    [on]"
+"SpoolJoin"
-"\x00"
-
-#
-"SpoolJoin   [N/A]"
-"\x00"
-
-#MSG_AUTO_DEPLETE_OFF c=17 r=1
-"SpoolJoin   [off]"
 "\x00"
 
 #MSG_AUTO_HOME
@@ -174,22 +166,14 @@
 "Copy selected language?"
 "Copiare la lingua selezionata?"
 
-#MSG_CRASHDETECT_ON
+#MSG_CRASHDETECT
-"Crash det.   [on]"
+"Crash det."
-"Rileva.crash [on]"
+"Rileva.crash"
 
 #
 "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
 "Scegli un filamento per la calibrazione del primo strato e selezionalo nel menu sullo schermo."
 
-#MSG_CRASHDETECT_NA
-"Crash det.  [N/A]"
-"Rileva.crash[N/A]"
-
-#MSG_CRASHDETECT_OFF
-"Crash det.  [off]"
-"Rileva.crash[off]"
-
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
 "Rilevato impatto."
@@ -274,17 +258,9 @@
 "Fail stats MMU"
 "Stat.fall. MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
+#MSG_FSENSOR_AUTOLOAD
-"F. autoload  [on]"
+"F. autoload"
-"Autocar.fil. [on]"
+"Autocar.fil."
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"Autocar.fil.[N/A]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"Autocar.fil.[off]"
 
 #
 "Fail stats"
@@ -298,26 +274,13 @@
 "Fan test"
 "Test ventola"
 
-#MSG_FANS_CHECK_ON c=17 r=1
+#MSG_FANS_CHECK
-"Fans check   [on]"
+"Fans check"
-"Control.vent [on]"
+"Control.vent"
-
-#MSG_FANS_CHECK_OFF c=17 r=1
-"Fans check  [off]"
-"Control.vent[off]"
-
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Sensore fil. [on]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Sensore fil.[N/A]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Sensore fil.[off]"
 
+#MSG_FSENSOR
+"Fil. sensor"
+"Sensore fil."
 #
 "Filam. runouts"
 "Filam. esauriti"
@@ -578,13 +541,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Riprendendo... "
 
-#MSG_STEALTH_MODE_OFF
+#MSG_MODE
-"Mode     [Normal]"
+"Mode"
-"Mod.    [normale]"
+"Mod."
 
-#MSG_SILENT_MODE_ON
+#MSG_NORMAL
-"Mode     [silent]"
+"Normal"
-"Mod. [silenziosa]"
+"Normale"
+
+#MSG_SILENT
+"Silent"
+"Silenzioso"
 
 #
 "MMU needs user attention."
@@ -594,17 +561,17 @@
 "MMU power fails"
 "Manc. corr. MMU"
 
-#MSG_STEALTH_MODE_ON
+#MSG_STEALTH
-"Mode    [Stealth]"
+"Stealth"
-"Mod. [silenziosa]"
+"Silenziosa"
 
-#MSG_AUTO_MODE_ON
+#MSG_AUTO_POWER
-"Mode [auto power]"
+"Auto power"
-"Mod.       [auto]"
+"Auto"
 
-#MSG_SILENT_MODE_OFF
+#MSG_HIGH_POWER
-"Mode [high power]"
+"High power"
-"Mod.      [forte]"
+"Forte"
 
 #
 "MMU2 connected"
@@ -638,7 +605,7 @@
 "No SD card"
 "Nessuna SD"
 
-#
+#MSG_NA
 "N/A"
 "\x00"
 
@@ -878,25 +845,21 @@
 "Right side[um]"
 "Destra [um]"
 
-#MSG_SECOND_SERIAL_ON c=17 r=1
+#MSG_RPI_PORT
-"RPi port     [on]"
+"RPi port"
-"Porta RPi    [on]"
+"Porta RPi"
-
-#MSG_SECOND_SERIAL_OFF c=17 r=1
-"RPi port    [off]"
-"Porta RPi   [off]"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
 "Se avvi il Wizard perderai la calibrazione preesistente e dovrai ricominciare dall'inizio. Continuare?"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
+#MSG_SD_CARD
-"SD card  [normal]"
+"SD card"
-"Mem. SD [normale]"
+"Mem. SD"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
+#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY
-"SD card [flshAir]"
+"FlashAir"
-"Mem. SD [flshAir]"
+"\x00"
 
 #
 "Right"
@@ -958,49 +921,49 @@
 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
 "Alcuni file non saranno ordinati. Il numero massimo di file in una cartella e 100 perche siano ordinati."
 
-#MSG_SORT_NONE c=17 r=1
+#MSG_SORT
-"Sort       [none]"
+"Sort"
-"Ordina  [nessuno]"
+"Ordina"
 
-#MSG_SORT_TIME c=17 r=1
+#MSG_NONE
-"Sort       [time]"
+"None"
-"Ordina    [cron.]"
+"Nessuno"
+
+#MSG_SORT_TIME
+"Time"
+"Cron."
 
 #
 "Severe skew:"
 "Devia.grave:"
 
-#MSG_SORT_ALPHA c=17 r=1
+#MSG_SORT_ALPHA
-"Sort   [alphabet]"
+"Alphabet"
-"Ordine [alfabeti]"
+"Alfabeti"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
 "Ordinando i file"
 
-#MSG_SOUND_LOUD c=17 r=1
+#MSG_SOUND_LOUD
-"Sound      [loud]"
+"Loud"
-"Suono     [forte]"
+"Forte"
 
 #
 "Slight skew:"
 "Devia.lieve:"
 
-#MSG_SOUND_MUTE c=17 r=1
+#MSG_SOUND
-"Sound      [mute]"
+"Sound"
-"Suono      [mute]"
+"Suono"
 
 #
 "Some problem encountered, Z-leveling enforced ..."
 "Sono stati rilevati problemi, avviato livellamento Z ..."
 
-#MSG_SOUND_ONCE c=17 r=1
+#MSG_SOUND_ONCE
-"Sound      [once]"
+"Once"
-"Suono   [singolo]"
+"Singolo"
-
-#MSG_SOUND_SILENT c=17 r=1
-"Sound    [silent]"
-"Suono[silenzioso]"
 
 #MSG_SPEED
 "Speed"
@@ -1038,22 +1001,14 @@
 "Select filament:"
 "Seleziona il filamento:"
 
-#MSG_TEMP_CALIBRATION c=20 r=1
+#MSG_TEMP_CALIBRATION c=12 r=1
-"Temp. cal.          "
+"Temp. cal."
-"Calib. temp. "
+"Calib. temp."
-
-#MSG_TEMP_CALIBRATION_ON c=20 r=1
-"Temp. cal.   [on]"
-"Calib. temp. [on]"
 
 #
 "Select temperature which matches your material."
 "Seleziona la temperatura appropriata per il tuo materiale."
 
-#MSG_TEMP_CALIBRATION_OFF c=20 r=1
-"Temp. cal.  [off]"
-"Calib. temp.[off]"
-
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"
 "Calib. Temp."
@@ -1232,14 +1187,18 @@
 
 #
 "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
-"\x00"
+"La stampante iniziera a stampare una linea a zig-zag. Gira la manopola fino a che non hai raggiungo l'altezza ottimale. Verifica con le immagini nel manuale (capitolo sulla calibrazione):"
 
 #
 "Y-correct:"
 "Correzione-Y:"
 
 #MSG_OFF
-" [off]"
+"Off"
+"\x00"
+
+#MSG_ON
+"On"
 "\x00"
 
 #
@@ -1258,17 +1217,17 @@
 "FINDA:"
 "\x00"
 
-#
+#MSG_FIRMWARE
-"Firmware   [none]"
+"Firmware"
-"Firmware[nessuno]"
+"\x00"
 
-#
+#MSG_STRICT
-"Firmware [strict]"
+"Strict"
-"Firmware [esatto]"
+"Esatto"
 
-#
+#MSG_WARN
-"Firmware   [warn]"
+"Warn"
-"Firmware [avviso]"
+"Avviso"
 
 #
 "HW Setup"
@@ -1278,25 +1237,13 @@
 "IR:"
 "\x00"
 
-#
+#MSG_MAGNETS_COMP
-"Magnets comp.[N/A]"
+"Magnets comp."
-"Comp. Magneti[N/A]"
+"Comp. Magneti"
 
-#
+#MSG_MESH
-"Magnets comp.[Off]"
+"Mesh"
-"Comp. Magneti[off]"
+"Griglia"
-
-#
-"Magnets comp. [On]"
-"Comp. Magneti [on]"
-
-#
-"Mesh         [3x3]"
-"Griglia      [3x3]"
-
-#
-"Mesh         [7x7]"
-"Griglia      [7x7]"
 
 #
 "Mesh bed leveling"
@@ -1306,53 +1253,21 @@
 "MK3S firmware detected on MK3 printer"
 "Firmware MK3S rilevato su stampante MK3"
 
-#
+#MSG_MMU_MODE
-"MMU Mode [Normal]"
+"MMU Mode"
-"Modalita MMU [Normale]"
+"Mod. MMU"
-
-#
-"MMU Mode[Stealth]"
-"Modalita MMU [Silenziosa]"
 
 #
 "Mode change in progress ..."
 "Cambio modalita in corso ..."
 
-#
+#MSG_MODEL
-"Model      [none]"
+"Model"
-"Modello [nessuno]"
+"Modello"
 
-#
+#MSG_NOZZLE_DIAMETER
-"Model    [strict]"
+"Nozzle d."
-"Modello  [esatto]"
+"Diam.Ugello"
-
-#
-"Model      [warn]"
-"Modello  [avviso]"
-
-#
-"Nozzle d.  [0.25]"
-"Diam.Ugello[0.25]"
-
-#
-"Nozzle d.  [0.40]"
-"Diam.Ugello[0.40]"
-
-#
-"Nozzle d.  [0.60]"
-"Diam.Ugello[0.60]"
-
-#
-"Nozzle     [none]"
-"Ugello  [nessuno]"
-
-#
-"Nozzle   [strict]"
-"Ugello   [esatto]"
-
-#
-"Nozzle     [warn]"
-"Ugello   [avviso]"
 
 #
 "G-code sliced for a different level. Continue?"
@@ -1414,9 +1329,9 @@
 "Sheet"
 "Piano"
 
-#
+#MSG_SOUND_BLIND
-"Sound    [assist]"
+"Assist"
-"Suono   [assist.]"
+"Assist."
 
 #
 "Steel sheets"
@@ -1426,14 +1341,6 @@
 "Z-correct:"
 "Correzione-Z:"
 
-#
+#MSG_Z_PROBE_NR
-"Z-probe nr.    [1]"
+"Z-probe nr."
-"Z-probe nr.    [1]"
+"\x00"
-
-#
-"Z-probe nr.    [3]"
-"Z-probe nr.    [3]"
-
-#
-"Z-probe nr.    [5]"
-"Z-probe nr.    [5]"

lang/lang_en_pl.txt

@@ -50,17 +50,9 @@
 "Are left and right Z~carriages all up?"
 "Obydwa konce osi sa na szczycie?"
 
-#MSG_AUTO_DEPLETE_ON c=17 r=1
+#MSG_AUTO_DEPLETE c=17 r=1
-"SpoolJoin    [on]"
+"SpoolJoin"
-"SpoolJoin    [wl]"
+"\x00"
-
-#
-"SpoolJoin   [N/A]"
-"SpoolJoin   [N/D]"
-
-#MSG_AUTO_DEPLETE_OFF c=17 r=1
-"SpoolJoin   [off]"
-"SpoolJoin   [wyl]"
 
 #MSG_AUTO_HOME
 "Auto home"
@@ -175,21 +167,13 @@
 "Skopiowac wybrany jezyk?"
 
 #MSG_CRASHDETECT_ON
-"Crash det.   [on]"
+"Crash det."
-"Wykr.zderzen [wl]"
+"Wykr.zderzen"
 
 #
 "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
 "Wybierz filament do Kalibracji Pierwszej Warstwy i potwierdz w menu ekranowym."
 
-#MSG_CRASHDETECT_NA
-"Crash det.  [N/A]"
-"Wykr.zderzen[N/D]"
-
-#MSG_CRASHDETECT_OFF
-"Crash det.  [off]"
-"Wykr.zderzen[wyl]"
-
 #MSG_CRASH_DETECTED c=20 r=1
 "Crash detected."
 "Zderzenie wykryte"
@@ -274,17 +258,9 @@
 "Fail stats MMU"
 "Bledy MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
+#MSG_FSENSOR_AUTOLOAD
-"F. autoload  [on]"
+"F. autoload"
-"Autolad.fil. [wl]"
+"Autolad. fil."
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"Autolad.fil.[N/D]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"Autolad.fil.[wyl]"
 
 #
 "Fail stats"
@@ -298,25 +274,13 @@
 "Fan test"
 "Test wentylatora"
 
-#MSG_FANS_CHECK_ON c=17 r=1
+#MSG_FANS_CHECK
-"Fans check   [on]"
+"Fans check"
-"Sprawd.went. [wl]"
+"Sprawd.went."
 
-#MSG_FANS_CHECK_OFF c=17 r=1
+#MSG_FSENSOR
-"Fans check  [off]"
+"Fil. sensor"
-"Sprawd.went.[wyl]"
+"Czuj. filam."
-
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Czuj. filam. [wl]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Czuj. filam.[N/D]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Czuj. filam.[wyl]"
 
 #
 "Filam. runouts"
@@ -578,13 +542,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Wznawianie..."
 
-#MSG_STEALTH_MODE_OFF
+#MSG_MODE
-"Mode     [Normal]"
+"Mode"
-"Tryb   [normalny]"
+"Tryb"
 
-#MSG_SILENT_MODE_ON
+#MSG_NORMAL
-"Mode     [silent]"
+"Normal"
-"Tryb      [cichy]"
+"Normalny"
+
+#MSG_SILENT
+"Silent"
+"Cichy"
 
 #
 "MMU needs user attention."
@@ -594,17 +562,17 @@
 "MMU power fails"
 "Zaniki zasil. MMU"
 
-#MSG_STEALTH_MODE_ON
+#MSG_STEALTH
-"Mode    [Stealth]"
+"Stealth"
-"Tryb      [cichy]"
+"Cichy"
 
-#MSG_AUTO_MODE_ON
+#MSG_AUTO_POWER
-"Mode [auto power]"
+"Auto power"
-"Tryb [automatycz]"
+"Automatycz"
 
-#MSG_SILENT_MODE_OFF
+#MSG_HIGH_POWER
-"Mode [high power]"
+"High power"
-"Tryb[wysoka wyd.]"
+"Wysoka wyd."
 
 #
 "MMU2 connected"
@@ -638,7 +606,7 @@
 "No SD card"
 "Brak karty SD"
 
-#
+#MSG_NA
 "N/A"
 "N/D"
 
@@ -878,25 +846,21 @@
 "Right side[um]"
 "Prawo [um]"
 
-#MSG_SECOND_SERIAL_ON c=17 r=1
+#MSG_RPI_PORT
-"RPi port     [on]"
+"RPi port"
-"Port RPi     [wl]"
+"Port RPi"
-
-#MSG_SECOND_SERIAL_OFF c=17 r=1
-"RPi port    [off]"
-"Port RPi    [wyl]"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
 "Wlaczenie Asystenta usunie obecne dane kalibracyjne i zacznie od poczatku. Kontynuowac?"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
+#MSG_SD_CARD
-"SD card  [normal]"
+"SD card"
-"Karta SD [normal]"
+"Karta SD"
 
-#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
+#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY
-"SD card [flshAir]"
+"FlashAir"
-"Karta SD[FlshAir]"
+"\x00"
 
 #
 "Right"
@@ -958,50 +922,49 @@
 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
 "Niektore pliki nie zostana posortowane. Max. liczba plikow w 1 folderze = 100."
 
-#MSG_SORT_NONE c=17 r=1
+#MSG_SORT
-"Sort       [none]"
+"Sort"
-"Sortowanie [brak]"
+"Sortowanie"
 
-#MSG_SORT_TIME c=17 r=1
+#MSG_NONE
-"Sort       [time]"
+"None"
-"Sortowanie [czas]"
+"Brak"
+
+#MSG_SORT_TIME
+"Time"
+"Czas"
 
 #
 "Severe skew:"
 "Znaczny skos:"
 
-#MSG_SORT_ALPHA c=17 r=1
+#MSG_SORT_ALPHA
-"Sort   [alphabet]"
+"Alphabet"
-"Sortowanie[alfab]"
+"Alfab"
 
 #MSG_SORTING c=20 r=1
 "Sorting files"
 "Sortowanie plikow"
 
-#MSG_SOUND_LOUD c=17 r=1
+#MSG_SOUND_LOUD
-"Sound      [loud]"
+"Loud"
-"Dzwiek   [glosny]"
+"Glosny"
 
 #
 "Slight skew:"
 "Lekki skos:"
 
-#MSG_SOUND_MUTE c=17 r=1
+#MSG_SOUND
-"Sound      [mute]"
+"Sound"
-"Dzwiek[wylaczony]"
+"Dzwiek"
 
 #
 "Some problem encountered, Z-leveling enforced ..."
 "Wykryto problem, wymuszono poziomowanie osi Z."
 
-#MSG_SOUND_ONCE c=17 r=1
+#MSG_SOUND_ONCE
-"Sound      [once]"
+"Once"
-"Dzwiek    [1-raz]"
+"1-raz"
-
-#MSG_SOUND_SILENT c=17 r=1
-"Sound    [silent]"
-"Dzwiek    [cichy]"
-
 #MSG_SPEED
 "Speed"
 "Predkosc"
@@ -1038,22 +1001,14 @@
 "Select filament:"
 "Wybierz filament:"
 
-#MSG_TEMP_CALIBRATION c=20 r=1
+#MSG_TEMP_CALIBRATION c=12 r=1
-"Temp. cal.          "
+"Temp. cal."
 "Kalibracja temp."
 
-#MSG_TEMP_CALIBRATION_ON c=20 r=1
-"Temp. cal.   [on]"
-"Kalibr.temp. [wl]"
-
 #
 "Select temperature which matches your material."
 "Wybierz temperature, ktora odpowiada Twojemu filamentowi."
 
-#MSG_TEMP_CALIBRATION_OFF c=20 r=1
-"Temp. cal.  [off]"
-"Kalibr.temp.[wyl]"
-
 #MSG_CALIBRATION_PINDA_MENU c=17 r=1
 "Temp. calibration"
 "Kalibracja temp."
@@ -1232,15 +1187,19 @@
 
 #
 "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
-"\x00"
+"Drukarka zacznie drukowanie linii w ksztalcie zygzaka. Ustaw optymalna wysokosc obracajac pokretlo. Porownaj z ilustracjami w Podreczniku (rozdzial Kalibracja)."
 
 #
 "Y-correct:"
 "Korekcja-Y:"
 
 #MSG_OFF
-" [off]"
+"Off"
-" [wyl]"
+"Wyl"
+
+#MSG_ON
+"On"
+"Wl"
 
 #
 "Back"
@@ -1258,17 +1217,17 @@
 "FINDA:"
 "\x00"
 
-#
+#MSG_FIRMWARE
-"Firmware   [none]"
+"Firmware"
-"Firmware   [brak]"
+"\x00"
 
-#
+#MSG_STRICT
-"Firmware [strict]"
+"Strict"
-"Firmware [restr.]"
+"Restr."
 
-#
+#MSG_WARN
-"Firmware   [warn]"
+"Warn"
-"Firmware[ostrzez]"
+"Ostrzez"
 
 #
 "HW Setup"
@@ -1278,25 +1237,13 @@
 "IR:"
 "\x00"
 
-#
+#MSG_MAGNETS_COMP
-"Magnets comp.[N/A]"
+"Magnets comp."
-"Kor. magnesow[N/D]"
+"Kor. magnesow"
 
-#
+#MSG_MESH
-"Magnets comp.[Off]"
+"Mesh"
-"Kor. magnesow[wyl]"
+"Siatka"
-
-#
-"Magnets comp. [On]"
-"Kor. magnesow [wl]"
-
-#
-"Mesh         [3x3]"
-"Siatka       [3x3]"
-
-#
-"Mesh         [7x7]"
-"Siatka       [7x7]"
 
 #
 "Mesh bed leveling"
@@ -1306,53 +1253,21 @@
 "MK3S firmware detected on MK3 printer"
 "Wykryto firmware MK3S w drukarce MK3"
 
-#
+#MSG_MMU_MODE
-"MMU Mode [Normal]"
+"MMU Mode"
-"Tryb MMU[Normaln]"
+"Tryb MMU"
-
-#
-"MMU Mode[Stealth]"
-"Tryb MMU[Stealth]"
 
 #
 "Mode change in progress ..."
 "Trwa zmiana trybu..."
 
-#
+#MSG_MODEL
-"Model      [none]"
+"Model"
-"Model      [brak]"
+"\x00"
 
-#
+#MSG_NOZZLE_DIAMETER
-"Model    [strict]"
+"Nozzle d."
-"Model [restrykc.]"
+"Sr. dyszy"
-
-#
-"Model      [warn]"
-"Model  [ostrzez.]"
-
-#
-"Nozzle d.  [0.25]"
-"Sr. dyszy  [0,25]"
-
-#
-"Nozzle d.  [0.40]"
-"Sr. dyszy  [0,40]"
-
-#
-"Nozzle d.  [0.60]"
-"Sr. dyszy  [0,60]"
-
-#
-"Nozzle     [none]"
-"Dysza      [brak]"
-
-#
-"Nozzle   [strict]"
-"Dysza [restrykc.]"
-
-#
-"Nozzle     [warn]"
-"Dysza  [ostrzez.]"
 
 #
 "G-code sliced for a different level. Continue?"
@@ -1414,9 +1329,9 @@
 "Sheet"
 "Plyta"
 
-#
+#MSG_SOUND_BLIND
-"Sound    [assist]"
+"Assist"
-"Dzwiek   [asyst.]"
+"Asyst."
 
 #
 "Steel sheets"
@@ -1426,14 +1341,6 @@
 "Z-correct:"
 "Korekcja-Z:"
 
-#
+#MSG_Z_PROBE_NR
-"Z-probe nr.    [1]"
+"Z-probe nr."
-"Ilosc Pomiarow [1]"
+"Ilosc Pomiarow"
-
-#
-"Z-probe nr.    [3]"
-"Ilosc Pomiarow [3]"
-
-#
-"Z-probe nr.    [5]"
-"Ilosc Pomiarow [5]"