diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index f740fd1e..e1535e9c 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -7322,16 +7322,6 @@ void recover_print(uint8_t automatic) {
         enquecommand_P(PSTR("G1 E5 F120")); //Extrude some filament to stabilize pessure 
     } 
 	enquecommand_P(PSTR("G1 E"  STRINGIFY(-DEFAULT_RETRACTION)" F480"));
-	if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_E_ABS))
-	{
-		float extruder_abs_pos = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION_E));
-		enquecommand_P(PSTR("M82")); //E axis abslute mode
-//		current_position[E_AXIS] = extruder_abs_pos;
-//		plan_set_e_position(extruder_abs_pos);
-	    sprintf_P(cmd, PSTR("G92 E"));
-		dtostrf(extruder_abs_pos, 6, 3, cmd + strlen(cmd));
-		enquecommand(cmd); 
-	}
 
   // Mark the power panic status as inactive.
 	eeprom_update_byte((uint8_t*)EEPROM_UVLO, 0);
@@ -7355,6 +7345,7 @@ void recover_print(uint8_t automatic) {
 
 void recover_machine_state_after_power_panic()
 {
+  char cmd[30];
   // 1) Recover the logical cordinates at the time of the power panic.
   // The logical XY coordinates are needed to recover the machine Z coordinate corrected by the mesh bed leveling.
   current_position[X_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION + 0));
@@ -7363,6 +7354,13 @@ void recover_machine_state_after_power_panic()
   // The current position after power panic is moved to the next closest 0th full step.
   current_position[Z_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION_Z)) + 
     UVLO_Z_AXIS_SHIFT + float((1024 - eeprom_read_word((uint16_t*)(EEPROM_UVLO_Z_MICROSTEPS)) + 7) >> 4) / axis_steps_per_unit[Z_AXIS];
+  if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_E_ABS)) {
+	  current_position[E_AXIS] = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION_E));
+	  sprintf_P(cmd, PSTR("G92 E"));
+	  dtostrf(current_position[E_AXIS], 6, 3, cmd + strlen(cmd));
+	  enquecommand(cmd);
+  }
+
   memcpy(destination, current_position, sizeof(destination));
 
   SERIAL_ECHOPGM("recover_machine_state_after_power_panic, initial ");
@@ -7468,6 +7466,11 @@ void restore_print_from_eeprom() {
   // Set the feedrate saved at the power panic.
 	sprintf_P(cmd, PSTR("G1 F%d"), feedrate_rec);
 	enquecommand(cmd);
+	if (eeprom_read_byte((uint8_t*)EEPROM_UVLO_E_ABS))
+	{
+	  float extruder_abs_pos = eeprom_read_float((float*)(EEPROM_UVLO_CURRENT_POSITION_E));
+	  enquecommand_P(PSTR("M82")); //E axis abslute mode
+	}
   // Set the fan speed saved at the power panic.
 	strcpy_P(cmd, PSTR("M106 S"));
 	strcat(cmd, itostr3(int(fan_speed_rec)));