diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index da18ee3d..de2d8255 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -2748,6 +2748,21 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
 	if (lcd_calibrate_z_end_stop_manual(onlyZ))
 	{
 #endif //TMC2130
+		
+		lcd_show_fullscreen_message_and_wait_P(_T(MSG_CONFIRM_NOZZLE_CLEAN));
+		if(onlyZ){
+			lcd_display_message_fullscreen_P(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1));
+			lcd_set_cursor(0, 3);
+			lcd_print(1);
+			lcd_puts_P(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2));
+		}else{
+			//lcd_show_fullscreen_message_and_wait_P(_T(MSG_PAPER));
+			lcd_display_message_fullscreen_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1));
+			lcd_set_cursor(0, 2);
+			lcd_print(1);
+			lcd_puts_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));
+		}
+
 		refresh_cmd_timeout();
 		#ifndef STEEL_SHEET
 		if (((degHotend(0) > MAX_HOTEND_TEMP_CALIBRATION) || (degBed() > MAX_BED_TEMP_CALIBRATION)) && (!onlyZ))
@@ -2762,7 +2777,6 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
 			bool result = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_STEEL_SHEET_CHECK), false, false);
 			if(result) lcd_show_fullscreen_message_and_wait_P(_T(MSG_REMOVE_STEEL_SHEET));
 			#endif //STEEL_SHEET
-			lcd_show_fullscreen_message_and_wait_P(_T(MSG_CONFIRM_NOZZLE_CLEAN));
 		    lcd_show_fullscreen_message_and_wait_P(_T(MSG_PAPER));
 			KEEPALIVE_STATE(IN_HANDLER);
 			lcd_display_message_fullscreen_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1));
@@ -2770,6 +2784,7 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
 			lcd_print(1);
 			lcd_puts_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));
 		}
+			
 		// Move the print head close to the bed.
 		current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
 
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index 74145f56..7dbf768d 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -3077,8 +3077,6 @@ void lcd_wait_for_cool_down() {
 #ifndef TMC2130
 bool lcd_calibrate_z_end_stop_manual(bool only_z)
 {
-    bool clean_nozzle_asked = false;
-
     // Don't know where we are. Let's claim we are Z=0, so the soft end stops will not be triggered when moving up.
     current_position[Z_AXIS] = 0;
     plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
@@ -3125,13 +3123,6 @@ bool lcd_calibrate_z_end_stop_manual(bool only_z)
                 previous_millis_msg = millis();
             }
         }
-
-        if (! clean_nozzle_asked) {
-            lcd_show_fullscreen_message_and_wait_P(_T(MSG_CONFIRM_NOZZLE_CLEAN));
-            clean_nozzle_asked = true;
-        }
-		
-
         // Let the user confirm, that the Z carriage is at the top end stoppers.
         int8_t result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Are left and right Z~carriages all up?"), false);////MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
         if (result == -1)
@@ -3146,22 +3137,6 @@ calibrated:
     // during the search for the induction points.
     current_position[Z_AXIS] = Z_MAX_POS-3.f;
     plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
-    
-    
-    if(only_z){
-        lcd_display_message_fullscreen_P(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1));
-        lcd_set_cursor(0, 3);
-        lcd_print(1);
-        lcd_puts_P(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2));
-    }else{
-		//lcd_show_fullscreen_message_and_wait_P(_T(MSG_PAPER));
-        lcd_display_message_fullscreen_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1));
-        lcd_set_cursor(0, 2);
-        lcd_print(1);
-        lcd_puts_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));
-    }
-    
-    
     return true;
 
 canceled: