3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'upstream/Mk3' into MK3_Dcodes_fix1

Browse Source
This commit is contained in:
3d-gussner 2020-04-07 11:03:21 +02:00
commit e635ce49d9
9 changed files with 345 additions and 279 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

92
Firmware/Dcodes.cpp
View File

@ -635,6 +635,98 @@ void dcode_12()
} }
#ifdef HEATBED_ANALYSIS
/*!
### D80 - Bed check <a href="https://reprap.org/wiki/G-code#D80:_Bed_check">D80: Bed check</a>
This command will log data to SD card file "mesh.txt".
#### Usage
D80 [ E | F | G | H | I | J ]
#### Parameters
- `E` - Dimension X (default 40)
- `F` - Dimention Y (default 40)
- `G` - Points X (default 40)
- `H` - Points Y (default 40)
- `I` - Offset X (default 74)
- `J` - Offset Y (default 34)
*/
void dcode_80()
{
float dimension_x = 40;
float dimension_y = 40;
int points_x = 40;
int points_y = 40;
float offset_x = 74;
float offset_y = 33;
if (code_seen('E')) dimension_x = code_value();
if (code_seen('F')) dimension_y = code_value();
if (code_seen('G')) {points_x = code_value(); }
if (code_seen('H')) {points_y = code_value(); }
if (code_seen('I')) {offset_x = code_value(); }
if (code_seen('J')) {offset_y = code_value(); }
printf_P(PSTR("DIM X: %f\n"), dimension_x);
printf_P(PSTR("DIM Y: %f\n"), dimension_y);
printf_P(PSTR("POINTS X: %d\n"), points_x);
printf_P(PSTR("POINTS Y: %d\n"), points_y);
printf_P(PSTR("OFFSET X: %f\n"), offset_x);
printf_P(PSTR("OFFSET Y: %f\n"), offset_y);
bed_check(dimension_x,dimension_y,points_x,points_y,offset_x,offset_y);
}
/*!
### D81 - Bed analysis <a href="https://reprap.org/wiki/G-code#D81:_Bed_analysis">D80: Bed analysis</a>
This command will log data to SD card file "wldsd.txt".
#### Usage
D81 [ E | F | G | H | I | J ]
#### Parameters
- `E` - Dimension X (default 40)
- `F` - Dimention Y (default 40)
- `G` - Points X (default 40)
- `H` - Points Y (default 40)
- `I` - Offset X (default 74)
- `J` - Offset Y (default 34)
*/
void dcode_81()
{
float dimension_x = 40;
float dimension_y = 40;
int points_x = 40;
int points_y = 40;
float offset_x = 74;
float offset_y = 33;
if (code_seen('E')) dimension_x = code_value();
if (code_seen('F')) dimension_y = code_value();
if (code_seen("G")) { strchr_pointer+=1; points_x = code_value(); }
if (code_seen("H")) { strchr_pointer+=1; points_y = code_value(); }
if (code_seen("I")) { strchr_pointer+=1; offset_x = code_value(); }
if (code_seen("J")) { strchr_pointer+=1; offset_y = code_value(); }
bed_analysis(dimension_x,dimension_y,points_x,points_y,offset_x,offset_y);
}
#endif //HEATBED_ANALYSIS
/*!
### D106 - Print measured fan speed for different pwm values <a href="https://reprap.org/wiki/G-code#D106:_Print_measured_fan_speed_for_different_pwm_values">D106: Print measured fan speed for different pwm values</a>
*/
void dcode_106()
{
for (int i = 255; i > 0; i = i - 5) {
fanSpeed = i;
//delay_keep_alive(2000);
for (int j = 0; j < 100; j++) {
delay_keep_alive(100);
}
printf_P(_N("%d: %d\n"), i, fan_speed[1]);
}
}
#ifdef TMC2130 #ifdef TMC2130
#include "planner.h" #include "planner.h"

22
Firmware/Dcodes.h
View File

@ -2,26 +2,40 @@
#define DCODES_H #define DCODES_H
extern void dcode__1(); //D-1 - Endless loop (to simulate deadlock) extern void dcode__1(); //D-1 - Endless loop (to simulate deadlock)
extern void dcode_0(); //D0 - Reset extern void dcode_0(); //D0 - Reset
extern void dcode_1(); //D1 - Clear EEPROM extern void dcode_1(); //D1 - Clear EEPROM
extern void dcode_2(); //D2 - Read/Write RAM extern void dcode_2(); //D2 - Read/Write RAM
#ifdef DEBUG_DCODE3
extern void dcode_3(); //D3 - Read/Write EEPROM extern void dcode_3(); //D3 - Read/Write EEPROM
#endif //DEBUG_DCODE3
extern void dcode_4(); //D4 - Read/Write PIN extern void dcode_4(); //D4 - Read/Write PIN
#ifdef DEBUG_DCODE5
extern void dcode_5(); //D5 - Read/Write FLASH extern void dcode_5(); //D5 - Read/Write FLASH
#endif //DEBUG_DCODE5
extern void dcode_6(); //D6 - Read/Write external FLASH extern void dcode_6(); //D6 - Read/Write external FLASH
extern void dcode_7(); //D7 - Read/Write Bootloader extern void dcode_7(); //D7 - Read/Write Bootloader
extern void dcode_8(); //D8 - Read/Write PINDA extern void dcode_8(); //D8 - Read/Write PINDA
extern void dcode_9(); //D9 - Read/Write ADC (Write=enable simulated, Read=disable simulated) extern void dcode_9(); //D9 - Read/Write ADC (Write=enable simulated, Read=disable simulated)
extern void dcode_10(); //D10 - XYZ calibration = OK extern void dcode_10(); //D10 - XYZ calibration = OK
extern void dcode_12(); //D12 - Log time. Writes the current time in the log file.
#ifdef HEATBED_ANALYSIS
extern void dcode_80(); //D80 - Bed check. This command will log data to SD card file "mesh.txt".
extern void dcode_81(); //D81 - Bed analysis. This command will log data to SD card file "wldsd.txt".
#endif //HEATBED_ANALYSIS
extern void dcode_106(); //D106 - Print measured fan speed for different pwm values
#ifdef TMC2130 #ifdef TMC2130
extern void dcode_2130(); //D2130 - TMC2130 extern void dcode_2130(); //D2130 - TMC2130
#endif //TMC2130 #endif //TMC2130
#ifdef PAT9125 #ifdef PAT9125
extern void dcode_9125(); //D9125 - PAT9125 extern void dcode_9125(); //D9125 - PAT9125
#endif //PAT9125 #endif //PAT9125

4
Firmware/Marlin.h
View File

@ -310,9 +310,9 @@ extern int8_t lcd_change_fil_state;
extern float default_retraction; extern float default_retraction;
#ifdef TMC2130 #ifdef TMC2130
bool homeaxis(int axis, bool doError = true, uint8_t cnt = 1, uint8_t* pstep = 0); void homeaxis(int axis, uint8_t cnt = 1, uint8_t* pstep = 0);
#else #else
bool homeaxis(int axis, bool doError = true, uint8_t cnt = 1); void homeaxis(int axis, uint8_t cnt = 1);
#endif //TMC2130 #endif //TMC2130

90
Firmware/Marlin_main.cpp
View File

@ -2197,9 +2197,24 @@ bool calibrate_z_auto()
#endif //TMC2130 #endif //TMC2130
#ifdef TMC2130 #ifdef TMC2130
bool homeaxis(int axis, bool doError, uint8_t cnt, uint8_t* pstep) static void check_Z_crash(void)
{
if (READ(Z_TMC2130_DIAG) != 0) { //Z crash
FORCE_HIGH_POWER_END;
current_position[Z_AXIS] = 0;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
current_position[Z_AXIS] += MESH_HOME_Z_SEARCH;
plan_buffer_line_curposXYZE(max_feedrate[Z_AXIS], active_extruder);
st_synchronize();
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
}
}
#endif //TMC2130
#ifdef TMC2130
void homeaxis(int axis, uint8_t cnt, uint8_t* pstep)
#else #else
bool homeaxis(int axis, bool doError, uint8_t cnt) void homeaxis(int axis, uint8_t cnt)
#endif //TMC2130 #endif //TMC2130
{ {
bool endstops_enabled = enable_endstops(true); //RP: endstops should be allways enabled durring homing bool endstops_enabled = enable_endstops(true); //RP: endstops should be allways enabled durring homing
@ -2312,13 +2327,7 @@ bool homeaxis(int axis, bool doError, uint8_t cnt)
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();
#ifdef TMC2130 #ifdef TMC2130
if (READ(Z_TMC2130_DIAG) != 0) { //Z crash check_Z_crash();
FORCE_HIGH_POWER_END;
if (doError) kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
current_position[axis] = -5; //assume that nozzle crashed into bed
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
return 0;
}
#endif //TMC2130 #endif //TMC2130
current_position[axis] = 0; current_position[axis] = 0;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
@ -2330,13 +2339,7 @@ bool homeaxis(int axis, bool doError, uint8_t cnt)
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();
#ifdef TMC2130 #ifdef TMC2130
if (READ(Z_TMC2130_DIAG) != 0) { //Z crash check_Z_crash();
FORCE_HIGH_POWER_END;
if (doError) kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
current_position[axis] = -5; //assume that nozzle crashed into bed
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
return 0;
}
#endif //TMC2130 #endif //TMC2130
axis_is_at_home(axis); axis_is_at_home(axis);
destination[axis] = current_position[axis]; destination[axis] = current_position[axis];
@ -2348,7 +2351,6 @@ bool homeaxis(int axis, bool doError, uint8_t cnt)
#endif #endif
} }
enable_endstops(endstops_enabled); enable_endstops(endstops_enabled);
return 1;
} }
/**/ /**/
@ -8982,28 +8984,7 @@ Sigma_Exit:
- `J` - Offset Y (default 34) - `J` - Offset Y (default 34)
*/ */
case 80: case 80:
{ dcode_80(); break;
float dimension_x = 40;
float dimension_y = 40;
int points_x = 40;
int points_y = 40;
float offset_x = 74;
float offset_y = 33;
if (code_seen('E')) dimension_x = code_value();
if (code_seen('F')) dimension_y = code_value();
if (code_seen('G')) {points_x = code_value(); }
if (code_seen('H')) {points_y = code_value(); }
if (code_seen('I')) {offset_x = code_value(); }
if (code_seen('J')) {offset_y = code_value(); }
printf_P(PSTR("DIM X: %f\n"), dimension_x);
printf_P(PSTR("DIM Y: %f\n"), dimension_y);
printf_P(PSTR("POINTS X: %d\n"), points_x);
printf_P(PSTR("POINTS Y: %d\n"), points_y);
printf_P(PSTR("OFFSET X: %f\n"), offset_x);
printf_P(PSTR("OFFSET Y: %f\n"), offset_y);
bed_check(dimension_x,dimension_y,points_x,points_y,offset_x,offset_y);
}break;
/*! /*!
### D81 - Bed analysis <a href="https://reprap.org/wiki/G-code#D81:_Bed_analysis">D80: Bed analysis</a> ### D81 - Bed analysis <a href="https://reprap.org/wiki/G-code#D81:_Bed_analysis">D80: Bed analysis</a>
@ -9021,24 +9002,7 @@ Sigma_Exit:
- `J` - Offset Y (default 34) - `J` - Offset Y (default 34)
*/ */
case 81: case 81:
{ dcode_81(); break;
float dimension_x = 40;
float dimension_y = 40;
int points_x = 40;
int points_y = 40;
float offset_x = 74;
float offset_y = 33;
if (code_seen('E')) dimension_x = code_value();
if (code_seen('F')) dimension_y = code_value();
if (code_seen("G")) { strchr_pointer+=1; points_x = code_value(); }
if (code_seen("H")) { strchr_pointer+=1; points_y = code_value(); }
if (code_seen("I")) { strchr_pointer+=1; offset_x = code_value(); }
if (code_seen("J")) { strchr_pointer+=1; offset_y = code_value(); }
bed_analysis(dimension_x,dimension_y,points_x,points_y,offset_x,offset_y);
} break;
#endif //HEATBED_ANALYSIS #endif //HEATBED_ANALYSIS
#ifdef DEBUG_DCODES #ifdef DEBUG_DCODES
@ -9047,17 +9011,7 @@ Sigma_Exit:
### D106 - Print measured fan speed for different pwm values <a href="https://reprap.org/wiki/G-code#D106:_Print_measured_fan_speed_for_different_pwm_values">D106: Print measured fan speed for different pwm values</a> ### D106 - Print measured fan speed for different pwm values <a href="https://reprap.org/wiki/G-code#D106:_Print_measured_fan_speed_for_different_pwm_values">D106: Print measured fan speed for different pwm values</a>
*/ */
case 106: case 106:
{ dcode_106(); break;
for (int i = 255; i > 0; i = i - 5) {
fanSpeed = i;
//delay_keep_alive(2000);
for (int j = 0; j < 100; j++) {
delay_keep_alive(100);
}
printf_P(_N("%d: %d\n"), i, fan_speed[1]);
}
}break;
#ifdef TMC2130 #ifdef TMC2130
/*! /*!

380
Firmware/heatbed_pwm.cpp
View File

@ -1,190 +1,190 @@
#include <avr/io.h> #include <avr/io.h>
#include <avr/interrupt.h> #include <avr/interrupt.h>
#include "io_atmega2560.h" #include "io_atmega2560.h"
// All this is about silencing the heat bed, as it behaves like a loudspeaker. // All this is about silencing the heat bed, as it behaves like a loudspeaker.
// Basically, we want the PWM heating switched at 30Hz (or so) which is a well ballanced // Basically, we want the PWM heating switched at 30Hz (or so) which is a well ballanced
// frequency for both power supply units (i.e. both PSUs are reasonably silent). // frequency for both power supply units (i.e. both PSUs are reasonably silent).
// The only trouble is the rising or falling edge of bed heating - that creates an audible click. // The only trouble is the rising or falling edge of bed heating - that creates an audible click.
// This audible click may be suppressed by making the rising or falling edge NOT sharp. // This audible click may be suppressed by making the rising or falling edge NOT sharp.
// Of course, making non-sharp edges in digital technology is not easy, but there is a solution. // Of course, making non-sharp edges in digital technology is not easy, but there is a solution.
// It is possible to do a fast PWM sequence with duty starting from 0 to 255. // It is possible to do a fast PWM sequence with duty starting from 0 to 255.
// Doing this at higher frequency than the bed "loudspeaker" can handle makes the click barely audible. // Doing this at higher frequency than the bed "loudspeaker" can handle makes the click barely audible.
// Technically: // Technically:
// timer0 is set to fast PWM mode at 62.5kHz (timer0 is linked to the bed heating pin) (zero prescaler) // timer0 is set to fast PWM mode at 62.5kHz (timer0 is linked to the bed heating pin) (zero prescaler)
// To keep the bed switching at 30Hz - we don't want the PWM running at 62kHz all the time // To keep the bed switching at 30Hz - we don't want the PWM running at 62kHz all the time
// since it would burn the heatbed's MOSFET: // since it would burn the heatbed's MOSFET:
// 16MHz/256 levels of PWM duty gives us 62.5kHz // 16MHz/256 levels of PWM duty gives us 62.5kHz
// 62.5kHz/256 gives ~244Hz, that is still too fast - 244/8 gives ~30Hz, that's what we need // 62.5kHz/256 gives ~244Hz, that is still too fast - 244/8 gives ~30Hz, that's what we need
// So the automaton runs atop of inner 8 (or 16) cycles. // So the automaton runs atop of inner 8 (or 16) cycles.
// The finite automaton is running in the ISR(TIMER0_OVF_vect) // The finite automaton is running in the ISR(TIMER0_OVF_vect)
// 2019-08-14 update: the original algorithm worked very well, however there were 2 regressions: // 2019-08-14 update: the original algorithm worked very well, however there were 2 regressions:
// 1. 62kHz ISR requires considerable amount of processing power, // 1. 62kHz ISR requires considerable amount of processing power,
// USB transfer speed dropped by 20%, which was most notable when doing short G-code segments. // USB transfer speed dropped by 20%, which was most notable when doing short G-code segments.
// 2. Some users reported TLed PSU started clicking when running at 120V/60Hz. // 2. Some users reported TLed PSU started clicking when running at 120V/60Hz.
// This looks like the original algorithm didn't maintain base PWM 30Hz, but only 15Hz // This looks like the original algorithm didn't maintain base PWM 30Hz, but only 15Hz
// To address both issues, there is an improved approach based on the idea of leveraging // To address both issues, there is an improved approach based on the idea of leveraging
// different CLK prescalers in some automaton states - i.e. when holding LOW or HIGH on the output pin, // different CLK prescalers in some automaton states - i.e. when holding LOW or HIGH on the output pin,
// we don't have to clock 62kHz, but we can increase the CLK prescaler for these states to 8 (or even 64). // we don't have to clock 62kHz, but we can increase the CLK prescaler for these states to 8 (or even 64).
// That shall result in the ISR not being called that much resulting in regained performance // That shall result in the ISR not being called that much resulting in regained performance
// Theoretically this is relatively easy, however one must be very carefull handling the AVR's timer // Theoretically this is relatively easy, however one must be very carefull handling the AVR's timer
// control registers correctly, especially setting them in a correct order. // control registers correctly, especially setting them in a correct order.
// Some registers are double buffered, some changes are applied in next cycles etc. // Some registers are double buffered, some changes are applied in next cycles etc.
// The biggest problem was with the CLK prescaler itself - this circuit is shared among almost all timers, // The biggest problem was with the CLK prescaler itself - this circuit is shared among almost all timers,
// we don't want to reset the prescaler counted value when transiting among automaton states. // we don't want to reset the prescaler counted value when transiting among automaton states.
// Resetting the prescaler would make the PWM more precise, right now there are temporal segments // Resetting the prescaler would make the PWM more precise, right now there are temporal segments
// of variable period ranging from 0 to 7 62kHz ticks - that's logical, the timer must "sync" // of variable period ranging from 0 to 7 62kHz ticks - that's logical, the timer must "sync"
// to the new slower CLK after setting the slower prescaler value. // to the new slower CLK after setting the slower prescaler value.
// In our application, this isn't any significant problem and may be ignored. // In our application, this isn't any significant problem and may be ignored.
// Doing changes in timer's registers non-correctly results in artefacts on the output pin // Doing changes in timer's registers non-correctly results in artefacts on the output pin
// - it can toggle unnoticed, which will result in bed clicking again. // - it can toggle unnoticed, which will result in bed clicking again.
// That's why there are special transition states ZERO_TO_RISE and ONE_TO_FALL, which enable the // That's why there are special transition states ZERO_TO_RISE and ONE_TO_FALL, which enable the
// counter change its operation atomically and without artefacts on the output pin. // counter change its operation atomically and without artefacts on the output pin.
// The resulting signal on the output pin was checked with an osciloscope. // The resulting signal on the output pin was checked with an osciloscope.
// If there are any change requirements in the future, the signal must be checked with an osciloscope again, // If there are any change requirements in the future, the signal must be checked with an osciloscope again,
// ad-hoc changes may completely screw things up! // ad-hoc changes may completely screw things up!
// 2020-01-29 update: we are introducing a new option to the automaton that will allow us to force the output state // 2020-01-29 update: we are introducing a new option to the automaton that will allow us to force the output state
// to either full ON or OFF. This is so that interference during the MBL probing is minimal. // to either full ON or OFF. This is so that interference during the MBL probing is minimal.
// To accomplish this goal we use bedPWMDisabled. It is only supposed to be used for brief periods of time as to // To accomplish this goal we use bedPWMDisabled. It is only supposed to be used for brief periods of time as to
// not make the bed temperature too unstable. Also, careful consideration should be used when using this // not make the bed temperature too unstable. Also, careful consideration should be used when using this
// option as leaving this enabled will also keep the bed output in the state it stopped in. // option as leaving this enabled will also keep the bed output in the state it stopped in.
///! Definition off finite automaton states ///! Definition off finite automaton states
enum class States : uint8_t { enum class States : uint8_t {
ZERO_START = 0,///< entry point of the automaton - reads the soft_pwm_bed value for the next whole PWM cycle ZERO_START = 0,///< entry point of the automaton - reads the soft_pwm_bed value for the next whole PWM cycle
ZERO, ///< steady 0 (OFF), no change for the whole period ZERO, ///< steady 0 (OFF), no change for the whole period
ZERO_TO_RISE, ///< metastate allowing the timer change its state atomically without artefacts on the output pin ZERO_TO_RISE, ///< metastate allowing the timer change its state atomically without artefacts on the output pin
RISE, ///< 16 fast PWM cycles with increasing duty up to steady ON RISE, ///< 16 fast PWM cycles with increasing duty up to steady ON
RISE_TO_ONE, ///< metastate allowing the timer change its state atomically without artefacts on the output pin RISE_TO_ONE, ///< metastate allowing the timer change its state atomically without artefacts on the output pin
ONE, ///< steady 1 (ON), no change for the whole period ONE, ///< steady 1 (ON), no change for the whole period
ONE_TO_FALL, ///< metastate allowing the timer change its state atomically without artefacts on the output pin ONE_TO_FALL, ///< metastate allowing the timer change its state atomically without artefacts on the output pin
FALL, ///< 16 fast PWM cycles with decreasing duty down to steady OFF FALL, ///< 16 fast PWM cycles with decreasing duty down to steady OFF
FALL_TO_ZERO ///< metastate allowing the timer change its state atomically without artefacts on the output pin FALL_TO_ZERO ///< metastate allowing the timer change its state atomically without artefacts on the output pin
}; };
///! Inner states of the finite automaton ///! Inner states of the finite automaton
static States state = States::ZERO_START; static States state = States::ZERO_START;
bool bedPWMDisabled = 0; bool bedPWMDisabled = 0;
///! Fast PWM counter is used in the RISE and FALL states (62.5kHz) ///! Fast PWM counter is used in the RISE and FALL states (62.5kHz)
static uint8_t slowCounter = 0; static uint8_t slowCounter = 0;
///! Slow PWM counter is used in the ZERO and ONE states (62.5kHz/8 or 64) ///! Slow PWM counter is used in the ZERO and ONE states (62.5kHz/8 or 64)
static uint8_t fastCounter = 0; static uint8_t fastCounter = 0;
///! PWM counter for the whole cycle - a cache for soft_pwm_bed ///! PWM counter for the whole cycle - a cache for soft_pwm_bed
static uint8_t pwm = 0; static uint8_t pwm = 0;
///! The slow PWM duty for the next 30Hz cycle ///! The slow PWM duty for the next 30Hz cycle
///! Set in the whole firmware at various places ///! Set in the whole firmware at various places
extern unsigned char soft_pwm_bed; extern unsigned char soft_pwm_bed;
/// fastMax - how many fast PWM steps to do in RISE and FALL states /// fastMax - how many fast PWM steps to do in RISE and FALL states
/// 16 is a good compromise between silenced bed ("smooth" edges) /// 16 is a good compromise between silenced bed ("smooth" edges)
/// and not burning the switching MOSFET /// and not burning the switching MOSFET
static const uint8_t fastMax = 16; static const uint8_t fastMax = 16;
/// Scaler 16->256 for fast PWM /// Scaler 16->256 for fast PWM
static const uint8_t fastShift = 4; static const uint8_t fastShift = 4;
/// Increment slow PWM counter by slowInc every ZERO or ONE state /// Increment slow PWM counter by slowInc every ZERO or ONE state
/// This allows for fine-tuning the basic PWM switching frequency /// This allows for fine-tuning the basic PWM switching frequency
/// A possible further optimization - use a 64 prescaler (instead of 8) /// A possible further optimization - use a 64 prescaler (instead of 8)
/// increment slowCounter by 1 /// increment slowCounter by 1
/// but use less bits of soft PWM - something like soft_pwm_bed >> 2 /// but use less bits of soft PWM - something like soft_pwm_bed >> 2
/// that may further reduce the CPU cycles required by the bed heating automaton /// that may further reduce the CPU cycles required by the bed heating automaton
/// Due to the nature of bed heating the reduced PID precision may not be a major issue, however doing 8x less ISR(timer0_ovf) may significantly improve the performance /// Due to the nature of bed heating the reduced PID precision may not be a major issue, however doing 8x less ISR(timer0_ovf) may significantly improve the performance
static const uint8_t slowInc = 1; static const uint8_t slowInc = 1;
ISR(TIMER0_OVF_vect) // timer compare interrupt service routine ISR(TIMER0_OVF_vect) // timer compare interrupt service routine
{ {
switch(state){ switch(state){
case States::ZERO_START: case States::ZERO_START:
if (bedPWMDisabled) return; // stay in the OFF state and do not change the output pin if (bedPWMDisabled) return; // stay in the OFF state and do not change the output pin
pwm = soft_pwm_bed << 1;// expecting soft_pwm_bed to be 7bit! pwm = soft_pwm_bed << 1;// expecting soft_pwm_bed to be 7bit!
if( pwm != 0 ){ if( pwm != 0 ){
state = States::ZERO; // do nothing, let it tick once again after the 30Hz period state = States::ZERO; // do nothing, let it tick once again after the 30Hz period
} }
break; break;
case States::ZERO: // end of state ZERO - we'll either stay in ZERO or change to RISE case States::ZERO: // end of state ZERO - we'll either stay in ZERO or change to RISE
// In any case update our cache of pwm value for the next whole cycle from soft_pwm_bed // In any case update our cache of pwm value for the next whole cycle from soft_pwm_bed
slowCounter += slowInc; // this does software timer_clk/256 or less (depends on slowInc) slowCounter += slowInc; // this does software timer_clk/256 or less (depends on slowInc)
if( slowCounter > pwm ){ if( slowCounter > pwm ){
return; return;
} // otherwise moving towards RISE } // otherwise moving towards RISE
state = States::ZERO_TO_RISE; // and finalize the change in a transitional state RISE0 state = States::ZERO_TO_RISE; // and finalize the change in a transitional state RISE0
break; break;
// even though it may look like the ZERO state may be glued together with the ZERO_TO_RISE, don't do it // even though it may look like the ZERO state may be glued together with the ZERO_TO_RISE, don't do it
// the timer must tick once more in order to get rid of occasional output pin toggles. // the timer must tick once more in order to get rid of occasional output pin toggles.
case States::ZERO_TO_RISE: // special state for handling transition between prescalers and switching inverted->non-inverted fast-PWM without toggling the output pin. case States::ZERO_TO_RISE: // special state for handling transition between prescalers and switching inverted->non-inverted fast-PWM without toggling the output pin.
// It must be done in consequent steps, otherwise the pin will get flipped up and down during one PWM cycle. // It must be done in consequent steps, otherwise the pin will get flipped up and down during one PWM cycle.
// Also beware of the correct sequence of the following timer control registers initialization - it really matters! // Also beware of the correct sequence of the following timer control registers initialization - it really matters!
state = States::RISE; // prepare for standard RISE cycles state = States::RISE; // prepare for standard RISE cycles
fastCounter = fastMax - 1;// we'll do 16-1 cycles of RISE fastCounter = fastMax - 1;// we'll do 16-1 cycles of RISE
TCNT0 = 255; // force overflow on the next clock cycle TCNT0 = 255; // force overflow on the next clock cycle
TCCR0B = (1 << CS00); // change prescaler to 1, i.e. 62.5kHz TCCR0B = (1 << CS00); // change prescaler to 1, i.e. 62.5kHz
TCCR0A &= ~(1 << COM0B0); // Clear OC0B on Compare Match, set OC0B at BOTTOM (non-inverting mode) TCCR0A &= ~(1 << COM0B0); // Clear OC0B on Compare Match, set OC0B at BOTTOM (non-inverting mode)
break; break;
case States::RISE: case States::RISE:
OCR0B = (fastMax - fastCounter) << fastShift; OCR0B = (fastMax - fastCounter) << fastShift;
if( fastCounter ){ if( fastCounter ){
--fastCounter; --fastCounter;
} else { // end of RISE cycles, changing into state ONE } else { // end of RISE cycles, changing into state ONE
state = States::RISE_TO_ONE; state = States::RISE_TO_ONE;
OCR0B = 255; // full duty OCR0B = 255; // full duty
TCNT0 = 254; // make the timer overflow in the next cycle TCNT0 = 254; // make the timer overflow in the next cycle
// @@TODO these constants are still subject to investigation // @@TODO these constants are still subject to investigation
} }
break; break;
case States::RISE_TO_ONE: case States::RISE_TO_ONE:
state = States::ONE; state = States::ONE;
OCR0B = 255; // full duty OCR0B = 255; // full duty
TCNT0 = 255; // make the timer overflow in the next cycle TCNT0 = 255; // make the timer overflow in the next cycle
TCCR0B = (1 << CS01); // change prescaler to 8, i.e. 7.8kHz TCCR0B = (1 << CS01); // change prescaler to 8, i.e. 7.8kHz
break; break;
case States::ONE: // state ONE - we'll either stay in ONE or change to FALL case States::ONE: // state ONE - we'll either stay in ONE or change to FALL
OCR0B = 255; OCR0B = 255;
if (bedPWMDisabled) return; // stay in the ON state and do not change the output pin if (bedPWMDisabled) return; // stay in the ON state and do not change the output pin
slowCounter += slowInc; // this does software timer_clk/256 or less slowCounter += slowInc; // this does software timer_clk/256 or less
if( slowCounter < pwm ){ if( slowCounter < pwm ){
return; return;
} }
if( (soft_pwm_bed << 1) >= (255 - slowInc - 1) ){ //@@TODO simplify & explain if( (soft_pwm_bed << 1) >= (255 - slowInc - 1) ){ //@@TODO simplify & explain
// if slowInc==2, soft_pwm == 251 will be the first to do short drops to zero. 252 will keep full heating // if slowInc==2, soft_pwm == 251 will be the first to do short drops to zero. 252 will keep full heating
return; // want full duty for the next ONE cycle again - so keep on heating and just wait for the next timer ovf return; // want full duty for the next ONE cycle again - so keep on heating and just wait for the next timer ovf
} }
// otherwise moving towards FALL // otherwise moving towards FALL
// @@TODO it looks like ONE_TO_FALL isn't necessary, there are no artefacts at all // @@TODO it looks like ONE_TO_FALL isn't necessary, there are no artefacts at all
state = States::ONE;//_TO_FALL; state = States::ONE;//_TO_FALL;
// TCCR0B = (1 << CS00); // change prescaler to 1, i.e. 62.5kHz // TCCR0B = (1 << CS00); // change prescaler to 1, i.e. 62.5kHz
// break; // break;
// case States::ONE_TO_FALL: // case States::ONE_TO_FALL:
// OCR0B = 255; // zero duty // OCR0B = 255; // zero duty
state=States::FALL; state=States::FALL;
fastCounter = fastMax - 1;// we'll do 16-1 cycles of RISE fastCounter = fastMax - 1;// we'll do 16-1 cycles of RISE
TCNT0 = 255; // force overflow on the next clock cycle TCNT0 = 255; // force overflow on the next clock cycle
TCCR0B = (1 << CS00); // change prescaler to 1, i.e. 62.5kHz TCCR0B = (1 << CS00); // change prescaler to 1, i.e. 62.5kHz
// must switch to inverting mode already here, because it takes a whole PWM cycle and it would make a "1" at the end of this pwm cycle // must switch to inverting mode already here, because it takes a whole PWM cycle and it would make a "1" at the end of this pwm cycle
// COM0B1 remains set both in inverting and non-inverting mode // COM0B1 remains set both in inverting and non-inverting mode
TCCR0A |= (1 << COM0B0); // inverting mode TCCR0A |= (1 << COM0B0); // inverting mode
break; break;
case States::FALL: case States::FALL:
OCR0B = (fastMax - fastCounter) << fastShift; // this is the same as in RISE, because now we are setting the zero part of duty due to inverting mode OCR0B = (fastMax - fastCounter) << fastShift; // this is the same as in RISE, because now we are setting the zero part of duty due to inverting mode
//TCCR0A |= (1 << COM0B0); // already set in ONE_TO_FALL //TCCR0A |= (1 << COM0B0); // already set in ONE_TO_FALL
if( fastCounter ){ if( fastCounter ){
--fastCounter; --fastCounter;
} else { // end of FALL cycles, changing into state ZERO } else { // end of FALL cycles, changing into state ZERO
state = States::FALL_TO_ZERO; state = States::FALL_TO_ZERO;
TCNT0 = 128; //@@TODO again - need to wait long enough to propagate the timer state changes TCNT0 = 128; //@@TODO again - need to wait long enough to propagate the timer state changes
OCR0B = 255; OCR0B = 255;
} }
break; break;
case States::FALL_TO_ZERO: case States::FALL_TO_ZERO:
state = States::ZERO_START; // go to read new soft_pwm_bed value for the next cycle state = States::ZERO_START; // go to read new soft_pwm_bed value for the next cycle
TCNT0 = 128; TCNT0 = 128;
OCR0B = 255; OCR0B = 255;
TCCR0B = (1 << CS01); // change prescaler to 8, i.e. 7.8kHz TCCR0B = (1 << CS01); // change prescaler to 8, i.e. 7.8kHz
break; break;
} }
} }

2
Firmware/tmc2130.cpp
View File

@ -994,7 +994,7 @@ bool tmc2130_home_calibrate(uint8_t axis)
uint8_t step[16]; uint8_t step[16];
uint8_t cnt[16]; uint8_t cnt[16];
uint8_t val[16]; uint8_t val[16];
homeaxis(axis, true, 16, step); homeaxis(axis, 16, step);
bubblesort_uint8(step, 16, 0); bubblesort_uint8(step, 16, 0);
printf_P(PSTR("sorted samples:\n")); printf_P(PSTR("sorted samples:\n"));
for (uint8_t i = 0; i < 16; i++) for (uint8_t i = 0; i < 16; i++)

28
Firmware/ultralcd.cpp
View File

@ -168,10 +168,10 @@ static void reset_crash_det(unsigned char axis);
static bool lcd_selfcheck_axis_sg(unsigned char axis); static bool lcd_selfcheck_axis_sg(unsigned char axis);
static bool lcd_selfcheck_axis(int _axis, int _travel); static bool lcd_selfcheck_axis(int _axis, int _travel);
#else #else
static bool lcd_selfcheck_endstops();
static bool lcd_selfcheck_axis(int _axis, int _travel); static bool lcd_selfcheck_axis(int _axis, int _travel);
static bool lcd_selfcheck_pulleys(int axis); static bool lcd_selfcheck_pulleys(int axis);
#endif //TMC2130 #endif //TMC2130
static bool lcd_selfcheck_endstops();
static bool lcd_selfcheck_check_heater(bool _isbed); static bool lcd_selfcheck_check_heater(bool _isbed);
enum class TestScreen : uint_least8_t enum class TestScreen : uint_least8_t
@ -7667,11 +7667,7 @@ bool lcd_selftest()
if (_result) if (_result)
{ {
_progress = lcd_selftest_screen(TestScreen::FansOk, _progress, 3, true, 2000); _progress = lcd_selftest_screen(TestScreen::FansOk, _progress, 3, true, 2000);
#ifndef TMC2130 _result = lcd_selfcheck_endstops(); //With TMC2130, only the Z probe is tested.
_result = lcd_selfcheck_endstops();
#else
_result = true;
#endif
} }
if (_result) if (_result)
@ -7738,7 +7734,7 @@ bool lcd_selftest()
set_destination_to_current(); set_destination_to_current();
_progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 1500); _progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 1500);
#ifdef TMC2130 #ifdef TMC2130
_result = homeaxis(Z_AXIS, false); homeaxis(Z_AXIS); //In case of failure, the code gets stuck in this function.
#else #else
_result = lcd_selfcheck_axis(Z_AXIS, Z_MAX_POS); _result = lcd_selfcheck_axis(Z_AXIS, Z_MAX_POS);
#endif //TMC2130 #endif //TMC2130
@ -8137,31 +8133,42 @@ static bool lcd_selfcheck_pulleys(int axis)
} }
return(true); return(true);
} }
#endif //not defined TMC2130
static bool lcd_selfcheck_endstops() static bool lcd_selfcheck_endstops()
{ {
bool _result = true; bool _result = true;
if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) || if (
#ifndef TMC2130
((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) || ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ||
#endif //!TMC2130
((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1)) ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1))
{ {
#ifndef TMC2130
if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) current_position[0] += 10; if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) current_position[0] += 10;
if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) current_position[1] += 10; if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) current_position[1] += 10;
#endif //!TMC2130
if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) current_position[2] += 10; if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) current_position[2] += 10;
} }
plan_buffer_line_curposXYZE(manual_feedrate[0] / 60, active_extruder); plan_buffer_line_curposXYZE(manual_feedrate[0] / 60, active_extruder);
_delay(500); st_synchronize();
if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) || if (
#ifndef TMC2130
((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ||
((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) || ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ||
#endif //!TMC2130
((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1)) ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1))
{ {
_result = false; _result = false;
char _error[4] = ""; char _error[4] = "";
#ifndef TMC2130
if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "X"); if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "X");
if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Y"); if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Y");
#endif //!TMC2130
if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Z"); if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Z");
lcd_selftest_error(TestError::Endstops, _error, ""); lcd_selftest_error(TestError::Endstops, _error, "");
} }
@ -8169,7 +8176,6 @@ static bool lcd_selfcheck_endstops()
manage_inactivity(true); manage_inactivity(true);
return _result; return _result;
} }
#endif //not defined TMC2130
static bool lcd_selfcheck_check_heater(bool _isbed) static bool lcd_selfcheck_check_heater(bool _isbed)
{ {

2
README.md
View File

@ -21,7 +21,7 @@
- For MK3 --> skip to step 3. - For MK3 --> skip to step 3.
- If you have a different printer model, follow step [2.b](#2b) from Windows build - If you have a different printer model, follow step [2.b](#2b) from Windows build
3. Run `sudo ./build.sh` 3. Run `./build.sh`
- Output hex file is at `"PrusaFirmware/lang/firmware.hex"` . In the same folder you can hex files for other languages as well. - Output hex file is at `"PrusaFirmware/lang/firmware.hex"` . In the same folder you can hex files for other languages as well.
4. Connect your printer and flash with PrusaSlicer ( Configuration --> Flash printer firmware ) or Slic3r PE. 4. Connect your printer and flash with PrusaSlicer ( Configuration --> Flash printer firmware ) or Slic3r PE.

4
lang/lang_en_fr.txt
View File

@ -20,7 +20,7 @@
#MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 #MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
"WARNING:\x0aCrash detection\x0adisabled in\x0aStealth mode" "WARNING:\x0aCrash detection\x0adisabled in\x0aStealth mode"
"ATTENTION:\x0aDetection de crash\x0adesactivee en\x0amode feutre" "ATTENTION:\x0aDetection de crash\x0adesactivee en\x0amode furtif"
# #
">Cancel" ">Cancel"
@ -550,7 +550,7 @@
#MSG_SILENT #MSG_SILENT
"Silent" "Silent"
"Feutre" "Furtif"
# #
"MMU needs user attention." "MMU needs user attention."