From f17aa3b0a2ec9a22033d1fb2121650092fe39968 Mon Sep 17 00:00:00 2001 From: bubnikv Date: Tue, 26 Jul 2016 15:36:35 +0200 Subject: [PATCH] Adjusted the maximum acceleration of the Z axis to a sensible value for the MK2 printer. --- Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h | 2 +- Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h index d6e73ab7..45ea2148 100644 --- a/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h +++ b/Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h @@ -51,7 +51,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E #define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min) -#define DEFAULT_MAX_FEEDRATE {500, 500, 1000, 25} // (mm/sec) +#define DEFAULT_MAX_FEEDRATE {500, 500, 24, 25} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {9000,9000,1000,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot. #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves diff --git a/Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h index 84d58a12..c740270c 100644 --- a/Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h +++ b/Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h @@ -51,7 +51,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E #define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min) -#define DEFAULT_MAX_FEEDRATE {500, 500, 1000, 25} // (mm/sec) +#define DEFAULT_MAX_FEEDRATE {500, 500, 24, 25} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {9000,9000,1000,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot. #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves