3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Don't include M851 in build if Auto Bed Leveling is not enabled

Browse source 
The variable cs.zprobe_zoffset is not used unless
auto bed leveling is enabled
This commit is contained in:
Guðni Már Gilbert 2022-08-26 15:18:14 +00:00
parent d87999a020
commit f7ae3039f8
5 changed files with 10 additions and 2 deletions

2
Firmware/Marlin_main.cpp
View file

@ -7930,6 +7930,7 @@ Sigma_Exit:
break;
#endif
#ifdef ENABLE_AUTO_BED_LEVELING
/*!
### M851 - Set Z-Probe Offset <a href="https://reprap.org/wiki/G-code#M851:_Set_Z-Probe_Offset">M851: Set Z-Probe Offset"</a>
Sets the Z-probe Z offset. This offset is used to determine the actual Z position of the nozzle when using a probe to home Z with G28. This value may also be used by G81 (Prusa) / G29 (Marlin) to apply correction to the Z position.
@ -7976,6 +7977,7 @@ Sigma_Exit:
break;
}
#endif // CUSTOM_M_CODE_SET_Z_PROBE_OFFSET
#endif // ENABLE_AUTO_BED_LEVELING
/*!
### M552 - Set IP address <a href="https://reprap.org/wiki/G-code#M552:_Set_IP_address.2C_enable.2Fdisable_network_interface">M552: Set IP address, enable/disable network interface"</a>