3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Status screen - status message logic simplification

Browse source 
added definitions of custom_message_type values
removed flag custom_message (previous solution maybe caused displaying of empty status line)
fixed in Marlin_main.cpp code "custom_message = _T(MSG_TEMP_CALIBRATION)"
This commit is contained in:
Robert Pelnar 2018-08-19 18:34:57 +02:00
parent f1ad1d22ba
commit fd9516f520
4 changed files with 396 additions and 488 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
Firmware/Marlin.h
View file

@ -315,9 +315,6 @@ void save_statistics(unsigned long _total_filament_used, unsigned long _total_pr
extern unsigned int heating_status;
extern unsigned int status_number;
extern unsigned int heating_status_counter;
extern bool custom_message;
extern unsigned int custom_message_type;
extern unsigned int custom_message_state;
extern char snmm_filaments_used;
extern unsigned long PingTime;
extern unsigned long NcTime;
@ -364,7 +361,7 @@ extern uint8_t print_percent_done_silent;
extern uint32_t print_time_remaining_silent;
#define PRINT_TIME_REMAINING_INIT 0xffffffff
#define PRINT_PERCENT_DONE_INIT 0xff
#define PRINTER_ACTIVE (IS_SD_PRINTING || is_usb_printing || isPrintPaused || (custom_message_type == 4) || saved_printing || (lcd_commands_type == LCD_COMMAND_V2_CAL) || card.paused || mmu_print_saved)
#define PRINTER_ACTIVE (IS_SD_PRINTING || is_usb_printing || isPrintPaused || (custom_message_type == CUSTOM_MSG_TYPE_TEMCAL) || saved_printing || (lcd_commands_type == LCD_COMMAND_V2_CAL) || card.paused || mmu_print_saved)
extern void calculate_extruder_multipliers();

44
Firmware/Marlin_main.cpp
View file

@ -353,12 +353,13 @@ unsigned int status_number = 0;
unsigned long total_filament_used;
unsigned int heating_status;
unsigned int heating_status_counter;
bool custom_message;
bool loading_flag = false;
unsigned int custom_message_type;
unsigned int custom_message_state;
char snmm_filaments_used = 0;
bool fan_state[2];
int fan_edge_counter[2];
int fan_speed[2];
@ -3157,8 +3158,7 @@ void gcode_M600(bool automatic, float x_position, float y_position, float z_shif
enquecommand(cmd);
lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message = false;
custom_message_type = 0;
custom_message_type = CUSTOM_MSG_TYPE_STATUS;
}
@ -3172,8 +3172,7 @@ void gcode_M701()
else
{
enable_z();
custom_message = true;
custom_message_type = 2;
custom_message_type = CUSTOM_MSG_TYPE_F_LOAD;
#ifdef FILAMENT_SENSOR
fsensor_oq_meassure_start(40);
@ -3215,8 +3214,7 @@ void gcode_M701()
lcd_setstatuspgm(_T(WELCOME_MSG));
disable_z();
loading_flag = false;
custom_message = false;
custom_message_type = 0;
custom_message_type = CUSTOM_MSG_TYPE_STATUS;
#ifdef FILAMENT_SENSOR
fsensor_oq_meassure_stop();
@ -4051,10 +4049,9 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
// setTargetHotend(200, 0);
setTargetBed(70 + (start_temp - 30));
custom_message = true;
custom_message_type = 4;
custom_message_type = CUSTOM_MSG_TYPE_TEMCAL;
custom_message_state = 1;
custom_message = _T(MSG_TEMP_CALIBRATION);
lcd_setstatuspgm(_T(MSG_TEMP_CALIBRATION));
current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
current_position[X_AXIS] = PINDA_PREHEAT_X;
@ -4154,10 +4151,9 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
break;
}
puts_P(_N("PINDA probe calibration start"));
custom_message = true;
custom_message_type = 4;
custom_message_type = CUSTOM_MSG_TYPE_TEMCAL;
custom_message_state = 1;
custom_message = _T(MSG_TEMP_CALIBRATION);
lcd_setstatuspgm(_T(MSG_TEMP_CALIBRATION));
current_position[X_AXIS] = PINDA_PREHEAT_X;
current_position[Y_AXIS] = PINDA_PREHEAT_Y;
current_position[Z_AXIS] = PINDA_PREHEAT_Z;
@ -4223,8 +4219,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
}
custom_message_type = 0;
custom_message = false;
custom_message_type = CUSTOM_MSG_TYPE_STATUS;
eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1);
puts_P(_N("Temperature calibration done."));
@ -4358,11 +4353,9 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
break;
}
// Save custom message state, set a new custom message state to display: Calibrating point 9.
bool custom_message_old = custom_message;
unsigned int custom_message_type_old = custom_message_type;
unsigned int custom_message_state_old = custom_message_state;
custom_message = true;
custom_message_type = 1;
custom_message_type = CUSTOM_MSG_TYPE_MESHBL;
custom_message_state = (MESH_MEAS_NUM_X_POINTS * MESH_MEAS_NUM_Y_POINTS) + 10;
lcd_update(1);
@ -4594,7 +4587,6 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
KEEPALIVE_STATE(NOT_BUSY);
// Restore custom message state
lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message = custom_message_old;
custom_message_type = custom_message_type_old;
custom_message_state = custom_message_state_old;
mesh_bed_leveling_flag = false;
@ -7804,11 +7796,9 @@ void bed_analysis(float x_dimension, float y_dimension, int x_points_num, int y_
enquecommand_front_P((PSTR("G1 Z5")));
return;
}
bool custom_message_old = custom_message;
unsigned int custom_message_type_old = custom_message_type;
unsigned int custom_message_state_old = custom_message_state;
custom_message = true;
custom_message_type = 1;
custom_message_type = CUSTOM_MSG_TYPE_MESHBL;
custom_message_state = (x_points_num * y_points_num) + 10;
lcd_update(1);
@ -7958,8 +7948,7 @@ void bed_analysis(float x_dimension, float y_dimension, int x_points_num, int y_
void temp_compensation_start() {
custom_message = true;
custom_message_type = 5;
custom_message_type = CUSTOM_MSG_TYPE_TEMPRE;
custom_message_state = PINDA_HEAT_T + 1;
lcd_update(2);
if (degHotend(active_extruder) > EXTRUDE_MINTEMP) {
@ -7980,9 +7969,8 @@ void temp_compensation_start() {
if (custom_message_state == 99 || custom_message_state == 9) lcd_update(2); //force whole display redraw if number of digits changed
else lcd_update(1);
}
custom_message_type = 0;
custom_message_type = CUSTOM_MSG_TYPE_STATUS;
custom_message_state = 0;
custom_message = false;
}
void temp_compensation_apply() {

489
Firmware/ultralcd.cpp
View file

@ -66,13 +66,17 @@ extern void crashdet_disable();
#endif //TMC2130
#ifdef SDCARD_SORT_ALPHA
bool presort_flag = false;
#endif
int lcd_commands_type = LCD_COMMAND_IDLE;
int lcd_commands_step = 0;
unsigned int custom_message_type = CUSTOM_MSG_TYPE_STATUS;
unsigned int custom_message_state = 0;
bool isPrintPaused = false;
uint8_t farm_mode = 0;
int farm_no = 0;
@ -518,23 +522,177 @@ uint8_t menu_item_sdfile(const char* str, const char* str_fn, char* str_fnl)
}
/*
20x4 |01234567890123456789|
|T 000/000D Z000.0 |
|B 000/000D F100% |
|SD100% T--:-- |
|Status line.........|
*/
static void lcd_implementation_status_screen()
//Print status line on status screen
void lcdui_print_status_line(void)
{
lcd_set_cursor(0, 3);
if (IS_SD_PRINTING)
{
if (strcmp(longFilenameOLD, card.longFilename) != 0)
{
memset(longFilenameOLD, '\0', strlen(longFilenameOLD));
sprintf_P(longFilenameOLD, PSTR("%s"), card.longFilename);
scrollstuff = 0;
}
}
if (heating_status)
{ // If heating flag, show progress of heating
heating_status_counter++;
if (heating_status_counter > 13)
{
heating_status_counter = 0;
}
lcd_set_cursor(7, 3);
lcd_puts_P(PSTR(" "));
for (unsigned int dots = 0; dots < heating_status_counter; dots++)
{
lcd_set_cursor(7 + dots, 3);
lcd_print('.');
}
switch (heating_status)
{
case 1:
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_HEATING));
break;
case 2:
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_HEATING_COMPLETE));
heating_status = 0;
heating_status_counter = 0;
break;
case 3:
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_BED_HEATING));
break;
case 4:
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_BED_DONE));
heating_status = 0;
heating_status_counter = 0;
break;
default:
break;
}
}
else if ((IS_SD_PRINTING) && (custom_message_type == CUSTOM_MSG_TYPE_STATUS))
{ // If printing from SD, show what we are printing
if(strlen(card.longFilename) > LCD_WIDTH)
{
int inters = 0;
int gh = scrollstuff;
while (((gh - scrollstuff) < LCD_WIDTH) && (inters == 0))
{
if (card.longFilename[gh] == '\0')
{
lcd_set_cursor(gh - scrollstuff, 3);
lcd_print(card.longFilename[gh - 1]);
scrollstuff = 0;
gh = scrollstuff;
inters = 1;
}
else
{
lcd_set_cursor(gh - scrollstuff, 3);
lcd_print(card.longFilename[gh - 1]);
gh++;
}
}
scrollstuff++;
}
else
{
lcd_print(longFilenameOLD);
}
}
else
{ // Otherwise check for other special events
switch (custom_message_type)
{
case CUSTOM_MSG_TYPE_STATUS: // Nothing special, print status message normally
lcd_print(lcd_status_message);
break;
case CUSTOM_MSG_TYPE_MESHBL: // If mesh bed leveling in progress, show the status
if (custom_message_state > 10)
{
lcd_set_cursor(0, 3);
lcd_puts_P(PSTR(" "));
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_CALIBRATE_Z_AUTO));
lcd_puts_P(PSTR(" : "));
lcd_print(custom_message_state-10);
}
else
{
if (custom_message_state == 3)
{
lcd_puts_P(_T(WELCOME_MSG));
lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message_type = CUSTOM_MSG_TYPE_STATUS;
}
if (custom_message_state > 3 && custom_message_state <= 10 )
{
lcd_set_cursor(0, 3);
lcd_puts_P(PSTR(" "));
lcd_set_cursor(0, 3);
lcd_puts_P(_i("Calibration done"));////MSG_HOMEYZ_DONE c=0 r=0
custom_message_state--;
}
}
break;
case CUSTOM_MSG_TYPE_F_LOAD: // If loading filament, print status
lcd_print(lcd_status_message);
break;
case CUSTOM_MSG_TYPE_PIDCAL: // PID tuning in progress
lcd_print(lcd_status_message);
if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0)
{
lcd_set_cursor(10, 3);
lcd_print(itostr3(pid_cycle));
lcd_print('/');
lcd_print(itostr3left(pid_number_of_cycles));
}
break;
case CUSTOM_MSG_TYPE_TEMCAL: // PINDA temp calibration in progress
{
char progress[4];
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_TEMP_CALIBRATION));
lcd_set_cursor(12, 3);
sprintf(progress, "%d/6", custom_message_state);
lcd_print(progress);
}
break;
case CUSTOM_MSG_TYPE_TEMPRE: // temp compensation preheat
lcd_set_cursor(0, 3);
lcd_puts_P(_i("PINDA Heating"));////MSG_PINDA_PREHEAT c=20 r=1
if (custom_message_state <= PINDA_HEAT_T)
{
lcd_puts_P(PSTR(": "));
lcd_print(custom_message_state); //seconds
lcd_print(' ');
}
break;
}
}
// Fill the rest of line to have nice and clean output
for(int fillspace = 0; fillspace < 20; fillspace++)
if ((lcd_status_message[fillspace] <= 31 ))
lcd_print(' ');
}
void lcdui_print_status_screen(void)
{
//|01234567890123456789|
//|T 000/000D Z000.0 |
//|B 000/000D F100% |
//|SD100% T--:-- |
//|Status line.........|
//----------------------
int tHotend=int(degHotend(0) + 0.5);
int tTarget=int(degTargetHotend(0) + 0.5);
@ -552,7 +710,7 @@ static void lcd_implementation_status_screen()
lcd_set_cursor(LCD_WIDTH - 8-2, 0);
#if 1
lcd_puts_P(PSTR(" Z"));
if (custom_message_type == 1) {
if (custom_message_type == CUSTOM_MSG_TYPE_MESHBL) {
// In a bed calibration mode.
lcd_puts_P(PSTR(" --- "));
} else {
@ -612,7 +770,7 @@ static void lcd_implementation_status_screen()
bool print_sd_status = true;
#ifdef PINDA_THERMISTOR
// if (farm_mode && (custom_message_type == 4))
// if (farm_mode && (custom_message_type == CUSTOM_MSG_TYPE_TEMCAL))
if (false)
{
lcd_set_cursor(0, 2);
@ -677,217 +835,19 @@ if (print_sd_status)
return;
#endif //DEBUG_DISABLE_LCD_STATUS_LINE
//Print status line
lcd_set_cursor(0, 3);
// If heating in progress, set flag
if (heating_status != 0) { custom_message = true; }
if (IS_SD_PRINTING) {
if (strcmp(longFilenameOLD, card.longFilename) != 0)
{
memset(longFilenameOLD, '\0', strlen(longFilenameOLD));
sprintf_P(longFilenameOLD, PSTR("%s"), card.longFilename);
scrollstuff = 0;
}
}
// If printing from SD, show what we are printing
if ((IS_SD_PRINTING) && !custom_message
#ifdef DEBUG_BUILD
&& lcd_status_message[0] == 0
#endif /* DEBUG_BUILD */
)
{
if(strlen(card.longFilename) > LCD_WIDTH)
{
int inters = 0;
int gh = scrollstuff;
while (((gh - scrollstuff) < LCD_WIDTH) && (inters == 0))
{
if (card.longFilename[gh] == '\0')
{
lcd_set_cursor(gh - scrollstuff, 3);
lcd_print(card.longFilename[gh - 1]);
scrollstuff = 0;
gh = scrollstuff;
inters = 1;
}
else
{
lcd_set_cursor(gh - scrollstuff, 3);
lcd_print(card.longFilename[gh - 1]);
gh++;
}
}
scrollstuff++;
}
else
{
lcd_print(longFilenameOLD);
}
}
// If not, check for other special events
else
{
if (custom_message)
{
// If heating flag, show progress of heating.
if (heating_status != 0)
{
heating_status_counter++;
if (heating_status_counter > 13)
{
heating_status_counter = 0;
}
lcd_set_cursor(7, 3);
lcd_puts_P(PSTR(" "));
for (unsigned int dots = 0; dots < heating_status_counter; dots++)
{
lcd_set_cursor(7 + dots, 3);
lcd_print('.');
}
switch (heating_status)
{
case 1:
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_HEATING));
break;
case 2:
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_HEATING_COMPLETE));
heating_status = 0;
heating_status_counter = 0;
custom_message = false;
break;
case 3:
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_BED_HEATING));
break;
case 4:
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_BED_DONE));
heating_status = 0;
heating_status_counter = 0;
custom_message = false;
break;
default:
break;
}
}
// If mesh bed leveling in progress, show the status
if (custom_message_type == 1)
{
if (custom_message_state > 10)
{
lcd_set_cursor(0, 3);
lcd_puts_P(PSTR(" "));
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_CALIBRATE_Z_AUTO));
lcd_puts_P(PSTR(" : "));
lcd_print(custom_message_state-10);
}
else
{
if (custom_message_state == 3)
{
lcd_puts_P(_T(WELCOME_MSG));
lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message = false;
custom_message_type = 0;
}
if (custom_message_state > 3 && custom_message_state <= 10 )
{
lcd_set_cursor(0, 3);
lcd_puts_P(PSTR(" "));
lcd_set_cursor(0, 3);
lcd_puts_P(_i("Calibration done"));////MSG_HOMEYZ_DONE c=0 r=0
custom_message_state--;
}
}
}
// If loading filament, print status
if (custom_message_type == 2)
{
lcd_print(lcd_status_message);
}
// PID tuning in progress
if (custom_message_type == 3) {
lcd_print(lcd_status_message);
if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0) {
lcd_set_cursor(10, 3);
lcd_print(itostr3(pid_cycle));
lcd_print('/');
lcd_print(itostr3left(pid_number_of_cycles));
}
}
// PINDA temp calibration in progress
if (custom_message_type == 4) {
char progress[4];
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_TEMP_CALIBRATION));
lcd_set_cursor(12, 3);
sprintf(progress, "%d/6", custom_message_state);
lcd_print(progress);
}
// temp compensation preheat
if (custom_message_type == 5) {
lcd_set_cursor(0, 3);
lcd_puts_P(_i("PINDA Heating"));////MSG_PINDA_PREHEAT c=20 r=1
if (custom_message_state <= PINDA_HEAT_T) {
lcd_puts_P(PSTR(": "));
lcd_print(custom_message_state); //seconds
lcd_print(' ');
}
}
}
else
{
// Nothing special, print status message normally
lcd_print(lcd_status_message);
}
}
// Fill the rest of line to have nice and clean output
for(int fillspace = 0; fillspace<20;fillspace++)
{
if((lcd_status_message[fillspace] > 31 ))
{
}
else
{
lcd_print(' ');
}
}
lcdui_print_status_line();
}
/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
// Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent
static void lcd_status_screen()
{
if (firstrun == 1)
{
firstrun = 0;
if(lcd_status_message_level == 0){
if(lcd_status_message_level == 0)
{
strncpy_P(lcd_status_message, _T(WELCOME_MSG), LCD_WIDTH);
lcd_finishstatus();
}
@ -896,19 +856,17 @@ static void lcd_status_screen()
eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, 0);
eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, 0);
}
}
if (lcd_status_update_delay)
lcd_status_update_delay--;
else
lcd_draw_update = 1;
if (lcd_draw_update)
{
ReInitLCD++;
if (ReInitLCD == 30)
{
lcd_refresh(); // to maybe revive the LCD if static electricity killed it.
@ -916,17 +874,11 @@ static void lcd_status_screen()
}
else
{
if ((ReInitLCD % 10) == 0)
{
lcd_refresh_noclear(); //to maybe revive the LCD if static electricity killed it.
}
}
lcd_implementation_status_screen();
//lcd_clear();
lcdui_print_status_screen();
if (farm_mode)
{
@ -943,38 +895,29 @@ static void lcd_status_screen()
break;
case 5:
if (IS_SD_PRINTING)
{
prusa_statistics(20);
}
break;
}
} // end of farm_mode
lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
if (lcd_commands_type != LCD_COMMAND_IDLE)
{
lcd_commands();
}
} // end of lcd_draw_update
bool current_click = LCD_CLICKED;
if (ignore_click) {
if (wait_for_unclick) {
if (!current_click) {
if (ignore_click)
{
if (wait_for_unclick)
{
if (!current_click)
ignore_click = wait_for_unclick = false;
}
else {
else
current_click = false;
}
}
else if (current_click) {
else if (current_click)
{
lcd_quick_feedback();
wait_for_unclick = true;
current_click = false;
@ -996,7 +939,6 @@ static void lcd_status_screen()
lcd_encoder = 0;
feedmultiply = 100;
}
if (feedmultiply == 100 && int(lcd_encoder) > ENCODER_FEEDRATE_DEADZONE)
{
feedmultiply += int(lcd_encoder) - ENCODER_FEEDRATE_DEADZONE;
@ -1018,24 +960,6 @@ static void lcd_status_screen()
feedmultiply = 10;
else if (feedmultiply > 999)
feedmultiply = 999;
/*if (farm_mode && !printer_connected) {
lcd_set_cursor(0, 3);
lcd_puts_P(_i("Printer disconnected"));////MSG_PRINTER_DISCONNECTED c=20 r=1
}*/
//#define FSENS_FACTOR (2580.8/50) //filament sensor factor [steps / encoder counts]
//#define FSENS_FACTOR (2580.8/45.3) //filament sensor factor [steps / encoder counts]
//lcd_set_cursor(0, 3);
//lcd_print(" ");
//lcd_set_cursor(0, 3);
//lcd_print(pat9125_x);
//lcd_set_cursor(6, 3);
//lcd_print(pat9125_y);
//lcd_set_cursor(12, 3);
//lcd_print(pat9125_b);
}
@ -1636,7 +1560,6 @@ void lcd_commands()
if (lcd_commands_step == 0)
{
lcd_commands_step = 6;
custom_message = true;
}
if (lcd_commands_step == 1 && !blocks_queued())
@ -1644,8 +1567,7 @@ void lcd_commands()
lcd_commands_step = 0;
lcd_commands_type = 0;
lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message_type = 0;
custom_message = false;
custom_message_type = CUSTOM_MSG_TYPE_STATUS;
isPrintPaused = false;
}
if (lcd_commands_step == 2 && !blocks_queued())
@ -1701,8 +1623,7 @@ void lcd_commands()
if (mmu_enabled)
setAllTargetHotends(0);
manage_heater();
custom_message = true;
custom_message_type = 2;
custom_message_type = CUSTOM_MSG_TYPE_F_LOAD;
lcd_commands_step = 5;
}
if (lcd_commands_step == 7 && !blocks_queued())
@ -1732,7 +1653,7 @@ void lcd_commands()
if (lcd_commands_type == LCD_COMMAND_FARM_MODE_CONFIRM) /// farm mode confirm
{
if (lcd_commands_step == 0) { lcd_commands_step = 6; custom_message = true; }
if (lcd_commands_step == 0) { lcd_commands_step = 6; }
if (lcd_commands_step == 1 && !blocks_queued())
{
@ -1775,9 +1696,8 @@ void lcd_commands()
char cmd1[30];
if (lcd_commands_step == 0) {
custom_message_type = 3;
custom_message_type = CUSTOM_MSG_TYPE_PIDCAL;
custom_message_state = 1;
custom_message = true;
lcd_draw_update = 3;
lcd_commands_step = 3;
}
@ -1810,8 +1730,7 @@ void lcd_commands()
}
if ((lcd_commands_step == 1) && ((millis()- display_time)>2000)) { //calibration finished message
lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message_type = 0;
custom_message = false;
custom_message_type = CUSTOM_MSG_TYPE_STATUS;
pid_temp = DEFAULT_PID_TEMP;
lcd_commands_step = 0;
lcd_commands_type = 0;
@ -2524,7 +2443,7 @@ static void lcd_LoadFilament()
{
if (degHotend0() > EXTRUDE_MINTEMP)
{
custom_message = true;
custom_message_type = CUSTOM_MSG_TYPE_F_LOAD;
loading_flag = true;
enquecommand_P(PSTR("M701")); //load filament
SERIAL_ECHOLN("Loading filament");
@ -3581,8 +3500,7 @@ void lcd_bed_calibration_show_result(uint8_t result, uint8_t point_too_far_mask)
void lcd_temp_cal_show_result(bool result) {
custom_message_type = 0;
custom_message = false;
custom_message_type = CUSTOM_MSG_TYPE_STATUS;
disable_x();
disable_y();
disable_z();
@ -5229,8 +5147,7 @@ static void change_extr_menu(){
//unload filament for single material printer (used in M702 gcode)
void unload_filament()
{
custom_message = true;
custom_message_type = 2;
custom_message_type = CUSTOM_MSG_TYPE_F_LOAD;
lcd_setstatuspgm(_T(MSG_UNLOADING_FILAMENT));
// extr_unload2();
@ -5265,8 +5182,7 @@ void unload_filament()
lcd_update_enable(true);
lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message = false;
custom_message_type = 0;
custom_message_type = CUSTOM_MSG_TYPE_STATUS;
}
@ -5752,8 +5668,7 @@ static void lcd_colorprint_change() {
enquecommand_P(PSTR("M600"));
custom_message = true;
custom_message_type = 2; //just print status message
custom_message_type = CUSTOM_MSG_TYPE_F_LOAD; //just print status message
lcd_setstatuspgm(_T(MSG_FINISHING_MOVEMENTS));
lcd_return_to_status();
lcd_draw_update = 3;

18
Firmware/ultralcd.h
View file

@ -52,6 +52,7 @@ extern const char* lcd_display_message_fullscreen_P(const char *msg);
extern int8_t lcd_show_multiscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting = true, bool default_yes = false);
// Ask the user to move the Z axis up to the end stoppers and let
// the user confirm that it has been done.
#ifndef TMC2130
extern bool lcd_calibrate_z_end_stop_manual(bool only_z);
#endif
@ -62,15 +63,12 @@ extern const char* lcd_display_message_fullscreen_P(const char *msg);
extern void lcd_diag_show_end_stops();
#define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
#define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x))
#define LCD_MESSAGERPGM(x) lcd_setstatuspgm((x))
#define LCD_ALERTMESSAGERPGM(x) lcd_setalertstatuspgm((x))
// To be used in lcd_commands_type.
#define LCD_COMMAND_IDLE 0
#define LCD_COMMAND_LOAD_FILAMENT 1
@ -83,10 +81,21 @@ extern const char* lcd_display_message_fullscreen_P(const char *msg);
extern int lcd_commands_type;
#define CUSTOM_MSG_TYPE_STATUS 0 // status message from lcd_status_message variable
#define CUSTOM_MSG_TYPE_MESHBL 1 // Mesh bed leveling in progress
#define CUSTOM_MSG_TYPE_F_LOAD 2 // Loading filament in progress
#define CUSTOM_MSG_TYPE_PIDCAL 3 // PID tuning in progress
#define CUSTOM_MSG_TYPE_TEMCAL 4 // PINDA temp calibration
#define CUSTOM_MSG_TYPE_TEMPRE 5 // Temp compensation preheat
extern unsigned int custom_message_type;
extern unsigned int custom_message_state;
extern uint8_t farm_mode;
extern int farm_no;
extern int farm_timer;
extern int farm_status;
#ifdef TMC2130
#define SILENT_MODE_NORMAL 0
#define SILENT_MODE_STEALTH 1
@ -97,8 +106,8 @@ extern const char* lcd_display_message_fullscreen_P(const char *msg);
#define SILENT_MODE_AUTO 2
#define SILENT_MODE_OFF SILENT_MODE_POWER
#endif
extern int8_t SilentModeMenu;
extern int8_t SilentModeMenu;
extern bool cancel_heatup;
extern bool isPrintPaused;
@ -108,7 +117,6 @@ extern const char* lcd_display_message_fullscreen_P(const char *msg);
void lcd_commands();
void change_extr(int extr);
void extr_adj(int extruder);