Robert Pelnar
31e6271b2c
Voltage measurement - conditional translation
2018-02-08 21:07:17 +01:00
PavelSindler
29978c4126
TACH_1 must be defined to enable print fan error
2018-02-07 11:10:04 +01:00
PavelSindler
0c98ec5f6b
selftest, max endstops undefined, initialization of extruder fan, y offset from extruder
2018-02-06 17:01:09 +01:00
Robert Pelnar
8562235440
MK2.5 port - compilable version
2018-02-01 20:08:11 +01:00
PavelSindler
cbcfcee48f
PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu
2018-01-25 15:23:11 +01:00
Robert Pelnar
f30da4bbca
babystep synchronisation
2018-01-16 01:34:44 +01:00
XPila
6ff7641d97
Merge pull request #385 from XPila/MK3
...
Build 143f
2018-01-09 20:01:56 +01:00
Robert Pelnar
43010b30b4
Build 143f
...
Crashdetection improoved, blocking temperature ISR fixed, limits for silent mode adjusted.
2018-01-09 19:54:07 +01:00
PavelSindler
858945d949
thermal runaway: reset cmd queue to ensure that heater/bed temp will be always set to zero
2018-01-09 13:35:12 +01:00
Robert Pelnar
8a5ba89a9c
Missing serial characters debuging
...
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
2018-01-02 20:55:33 +01:00
Robert Pelnar
f9d5619682
MINTEMP safety for ambient temperature < 18C
...
Silent mode acceleration limit lowered to 1000mm/s^2
2017-12-27 18:20:04 +01:00
Robert Pelnar
8739b4a610
MINTEMP fix
2017-12-23 03:36:08 +01:00
Robert Pelnar
3ddbac6056
LCD_PWM removed (will be solved other way)
2017-12-21 01:00:49 +01:00
Robert Pelnar
a3a0e70eeb
Fsensor autoload enabled menu and eeprom variable
2017-12-20 22:29:41 +01:00
Robert Pelnar
c88938e813
Fixed blocked lcd buttons
...
build = 137y
2017-12-20 21:33:07 +01:00
Robert Pelnar
25dd6dd673
new module adc (analog2digital)
...
temperature.cpp - adc sampling state machine removed
new dcode D9 (adc read/write + simulator)
temporarily DEBUG_DISABLE_STARTMSGS because UI blocked
SILENT_MAX_FEEDRATE reduced to 172mm/s
hexfile removed
build number 137x
2017-12-20 13:42:20 +01:00
Robert Pelnar
01654e7145
Meassuring voltages (pwr, bed), voltages menu
2017-12-15 18:33:35 +01:00
PavelSindler
893f34fd85
watchdog reset
2017-12-14 20:28:07 +01:00
Robert Pelnar
7e00248060
new ambient thermistor table
...
MINTEMP_MINAMBIENT
2017-12-12 22:49:47 +01:00
Robert Pelnar
f2e9bdef24
Fsensor synchronization and triggering improved
...
Watchdog implemented (4s interval, triggered from manage_heater)
Stallguard sensitivity for XY decreased by 1
Extruder current adjusted to 5.5kg force
Build number = 111
2017-11-24 21:53:35 +01:00
PavelSindler
1ca48fee49
PID calibration temp runaway
2017-11-21 15:11:15 +01:00
PavelSindler
91d125369e
keepalive messages initial version
2017-11-15 15:09:29 +01:00
PavelSindler
f4d5d891df
measuring pulse width: initial version
2017-10-26 17:42:27 +02:00
PavelSindler
a95506b128
fan speed error during print fixed
2017-09-22 21:21:16 +02:00
PavelSindler
d1a065881b
fan error: long pause is used during print, resuming print resets error flag; stop print used during heating phase
2017-09-22 20:43:30 +02:00
PavelSindler
13f45adb13
fan error changes
2017-09-22 19:31:52 +02:00
PavelSindler
a53428835a
fan error improvements
2017-09-22 18:22:21 +02:00
PavelSindler
6eb57da770
fan check can be turned off from support menu, saving parameters to eeprom with offset and different levels, fan kickstart,2nd heatbed version, fans check modified
2017-09-21 15:20:02 +02:00
Robert Pelnar
d9cdb1da60
Ambient thermistor - table and conversion function, extruder motor changed back to 200steps type, extruder resolution changed to 32usteps.
2017-09-06 16:04:50 +02:00
Robert Pelnar
8ec316773f
PINDA thermistor and ambient thermistor.
2017-09-05 14:02:35 +02:00
Robert Pelnar
f563618b1c
PINDA thermistor + extruder current adjust.
2017-08-30 21:56:48 +02:00
Robert Pelnar
1e705198e0
LCD backlight brightnes pwm control and lcd blinking.
2017-08-21 17:23:30 +02:00
Robert Pelnar
ec7678a25f
pat9125 filament sensor
...
sg homing - bug fix + homing multiple axes simultanously (AXIS_MASK)
2017-07-07 04:45:09 +02:00
XPila
458dfa80f6
Merge branch 'MK3' into MK3
2017-07-06 12:55:30 +02:00
PavelSindler
16fffed52d
current feedrate and fan speed stored to eeprom in power panic, number of blocks (linear movements) in planner serve for counting SD card recover position, print fan speed error limit prolonged to 15s
2017-07-05 15:04:43 +02:00
Robert Pelnar
b8025e63e6
DEBUG defines, variant files for MK3
2017-07-04 16:23:28 +02:00
PavelSindler
a8678cb2fd
recover print
2017-07-04 11:31:39 +02:00
PavelSindler
db12119b68
position saving and restoring in UVLO
2017-07-02 00:11:21 +02:00
PavelSindler
c4be651d2b
uvlo initial version
2017-07-01 18:51:02 +02:00
Robert Pelnar
f6a8e1df9d
TMC2130 + software SG homing + LF lineendings + tmc2130 debug M-Codes
...
M910 - tmc2130_init
M911 - set holding currents
M912 - set running currents
M913 - print currents
2017-07-01 12:39:16 +02:00
PavelSindler
43d696659f
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
PavelSindler
0578ea527e
fan speed check initial version, selftest updated
2017-06-28 14:24:45 +02:00
michalprusa
3faef75a0d
3.0.10 sync
2017-03-24 19:47:50 +01:00
bubnikv
29cb4b2b5d
Removed the non-working pressure advance feature.
...
Improved accuracy of diagonal moves by oversampling the path discretization.
Accelerated the planner by rewriting time critical routines from floating
point to fixed point arithmetics.
2016-09-01 13:09:56 +02:00
michalprusa
307d17422d
3.0.6 sync
2016-08-11 10:42:53 +02:00
michalprusa
30f0528aba
Initial commit
2016-07-22 15:28:01 +02:00
