2093 Commits

Author	SHA1	Message	Date
PavelSindler	02262ff7ca	mmu load fail: possibility to unload/eject filament from menu	2019-01-04 21:37:19 +01:00
Marek Bel	d89c03a0f1	Documentation.	2019-01-04 21:26:13 +01:00
Marek Bel	1a219b2372	Mark filament as depleted when detected by MMUv2 FINDA. Do not try to load filament if it is marked depleted, load next filament instead. Force user action when all filaments are marked as depleted.	2019-01-04 21:11:42 +01:00
PavelSindler	b7b7e9387f	do resend attempts before pausing print (mmu needs attention state) so the print would not be paused if T-code is not received correctly by mmu; prevent infinite loading	2019-01-04 21:07:52 +01:00
Marek Bel	a7128ffa04	Comment.	2019-01-04 19:56:15 +01:00
Marek Bel	92ff284f82	Remove redundant code.	2019-01-04 19:35:33 +01:00
Marek Bel	360a977520	Fix allDepleted(). Add tests.	2019-01-04 19:34:42 +01:00
Marek Bel	a309ec1b0b	Add filament auto deplete engine for multi-material prints with MMUv2.	2019-01-03 22:58:25 +01:00
MRprusa3d	4e300fd552	minTemp ... safety heaters management during/after minTemp	2019-01-02 18:25:41 +01:00
PavelSindler	3ab1daf722	MMU_DEBUG temporarily enabled	2018-12-21 23:17:32 +01:00
PavelSindler	88441f7f2f	scan power failures fix	2018-12-21 23:07:39 +01:00
PavelSindler	6ba86acebc	send A (abort) command to mmu only when loading phase of T-code	2018-12-21 22:33:01 +01:00
PavelSindler	e36e58f385	show sensor on/off temporarily changed to unlocalized strings	2018-12-21 21:28:57 +01:00
PavelSindler	688d4a8a82	missing defines in variant files	2018-12-21 21:05:54 +01:00
PavelSindler	ba57986b72	merge changes from upstream	2018-12-21 20:58:38 +01:00
PavelSindler	5462d451e1	show power failures in fail stats menu, shorter load to nozzle if idler sensor detected	2018-12-21 20:56:45 +01:00
PavelSindler	d1ca73597b	Merge pull request #1412 from XPila/V3_5 ... Repeat last MMU command after timeout	2018-12-21 20:53:24 +01:00
PavelSindler	d292e877df	load to nozzle shortened, sensor menu moved to support	2018-12-21 18:51:13 +01:00
PavelSindler	3c64bad1cb	initial version which works on old and new hw, initial version of idler sensor detection	2018-12-21 17:12:16 +01:00
PavelSindler	75523b1497	Merge pull request #1417 from PavelSindler/z_cal_endstops ... version changed	2018-12-19 20:08:22 +01:00
PavelSindler	acbfe89f04	version changed	2018-12-19 20:07:18 +01:00
PavelSindler	b0fce9122e	Merge pull request #1416 from PavelSindler/z_cal_endstops ... Z cal endstops and stop paused print fix	2018-12-19 19:46:27 +01:00
Robert Pelnar	f79137898a	Fix - move down after calibrate Z (PFW718)	2018-12-19 19:22:03 +01:00
PavelSindler	40fe52202d	stop paused print fix: saved_printing set to false when doing stop print	2018-12-19 19:20:09 +01:00
Robert Pelnar	b8c5b6259e	Fix - move down after calibrate Z (PFW718)	2018-12-19 14:40:10 +01:00
Robert Pelnar	c69d4aa914	Move 1mm down with disabled endstop after calibrate_z_auto (PFW718)	2018-12-19 13:43:49 +01:00
Robert Pelnar	16e5fb50dd	Remove M601 from queue before saving state (prevent infinite loop - PFW713)	2018-12-18 20:39:38 +01:00
Robert Pelnar	34f116b4d9	Move 1mm down with disabled endstop after calibrate_z_auto (PFW718)	2018-12-18 19:57:29 +01:00
PavelSindler	b5430c2968	M600: consume click	2018-12-18 19:10:02 +01:00
Robert Pelnar	75d31fd2cb	Repeat last MMU command after timeout	2018-12-18 18:47:54 +01:00
PavelSindler	880163dbcb	missing prototypes	2018-12-18 17:38:24 +01:00
PavelSindler	fc5d7e35ef	fail stats mmu function definitions	2018-12-18 17:35:41 +01:00
PavelSindler	11ab5dfd36	fail stats menu for mmu defined for MK2.5 version	2018-12-18 17:33:27 +01:00
PavelSindler	4543949cac	build without MMU_IDLER_SENSOR_PIN defined	2018-12-18 17:29:44 +01:00
PavelSindler	fc33affbda	temporary change	2018-12-18 17:24:29 +01:00
PavelSindler	2100376eb1	Merge remote-tracking branch 'upstream/MK3' into idler_sensor	2018-12-18 16:16:48 +01:00
PavelSindler	c782373f2d	comment	2018-12-18 16:09:10 +01:00
PavelSindler	7703125b2e	retry unload movements (T-codes, M702 C) if filament detected by idler sensor, then turn off stepper and wait, MMU_LOAD_TIME prolonged	2018-12-18 16:08:29 +01:00
PavelSindler	27c8612360	use just short movement for unloading filament	2018-12-17 21:25:07 +01:00
PavelSindler	cb1f6d2a0e	show sensor states in calibration menu	2018-12-14 19:43:26 +01:00
Robert Pelnar	927898151a	fix - tmc2130 conditional translation	2018-12-14 15:46:50 +01:00
Robert Pelnar	cfe83daf4a	Meshbed leveling fail - move 1mm outside of colission with disabled endstop	2018-12-14 15:32:47 +01:00
PavelSindler	e0bed71801	comments update	2018-12-13 17:01:45 +01:00
PavelSindler	bbba27c15f	idler state menu	2018-12-13 16:53:59 +01:00
PavelSindler	24ef6deeed	typo fixed	2018-12-13 16:43:40 +01:00
PavelSindler	9c4f086add	fixed statistics for MMU_FAIL	2018-12-13 01:09:21 +01:00
PavelSindler	df71398066	statistics fix	2018-12-13 00:43:27 +01:00
PavelSindler	a9829b6a1a	add statistics and idler sensor state	2018-12-13 00:12:00 +01:00
PavelSindler	665f1d7ffe	pause print after N continue loading attempts and wait for user, then start print and repeat last T-code	2018-12-12 23:36:50 +01:00
PavelSindler	29ecd4ec7a	duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu	2018-12-12 22:32:47 +01:00
Marek Bel	3d4cb8a994	Document gcode T.	2018-12-12 20:30:28 +01:00
PavelSindler	c256af0a1c	unknown filament added; the same T-code will be not executed twice in a row; continue loading	2018-12-12 14:50:55 +01:00
PavelSindler	e52e53d1eb	send continue loading commands periodically if initial load fails	2018-12-12 13:54:17 +01:00
PavelSindler	041ed172a0	Merge remote-tracking branch 'robert/MK3' into idler_sensor	2018-12-11 19:16:04 +01:00
PavelSindler	8af127870d	consume click	2018-12-11 15:59:44 +01:00
PavelSindler	6d6de67c3f	consume click	2018-12-07 18:31:30 +01:00
Robert Pelnar	35378769fd	MMU - idler sensor	2018-12-06 19:19:50 +01:00
Robert Pelnar	6157c3ab32	New filament sensor	2018-12-06 15:41:53 +01:00
Robert Pelnar	41b78187ca	LCD backlight - full brightnes at start	2018-12-06 15:27:05 +01:00
Robert Pelnar	cb334238cc	Slow PWM fan @ 62.5Hz	2018-12-06 15:18:07 +01:00
XPila	1948cb6310	Merge pull request #1369 from PavelSindler/M220_MK3 ... M220: possibility to backup/restore speed	2018-11-30 19:02:45 +01:00
PavelSindler	d1d4a8c58c	whitespace	2018-11-29 17:33:36 +01:00
PavelSindler	8e239ce76f	changed M220	2018-11-29 17:02:38 +01:00
PavelSindler	929e1de253	special variable for saving/restoring feedmultiply using M220	2018-11-29 17:02:10 +01:00
PavelSindler	839de141a3	resolving conflicts	2018-11-29 16:26:49 +01:00
PavelSindler	abf20ef6a2	merged changes from public upstream (Prusa-Firmware repository)	2018-11-29 13:46:58 +01:00
MRprusa3d	83a9f75abe	minTemp ... correct minTemp detection @ MK2.5 & MK3	2018-11-28 23:43:16 +01:00
Marek Bel	38dacaf07a	Automate secondary language support build.	2018-11-26 20:24:24 +01:00
PavelSindler	90876453a7	Merge pull request #1357 from PavelSindler/MK3_for_merging ... version change	2018-11-22 23:32:37 +01:00
PavelSindler	47d3535012	version change	2018-11-22 23:30:01 +01:00
PavelSindler	c1773c1aa4	Merge pull request #1356 from PavelSindler/MK3_for_merging ... process serial line during pause	2018-11-22 23:07:07 +01:00
PavelSindler	85b23d1db6	process serial line during pause	2018-11-22 21:41:22 +01:00
PavelSindler	b3ab9d0ee0	Merge pull request #1354 from XPila/V3_5 ... Lang - final corrections	2018-11-22 19:03:30 +01:00
Robert Pelnar	e229f3343e	Lang - text "volume.init failed" removed from dictionary	2018-11-22 18:48:22 +01:00
Robert Pelnar	42f2a61416	Lang - text "TRIGGERED" removed from dictionary	2018-11-22 18:46:02 +01:00
Robert Pelnar	e9131542ca	Lang - text "Sleep..." removed from dictionary	2018-11-22 18:43:21 +01:00
Robert Pelnar	ddf898cb41	Lang - text "SD init fail" removed from dictionary	2018-11-22 18:41:00 +01:00
Robert Pelnar	3384dd8487	Lang - text "SD card ok" removed from dictionary	2018-11-22 18:39:35 +01:00
Robert Pelnar	72c7810641	Lang - text "Resend" removed from dictionary	2018-11-22 18:38:20 +01:00
Robert Pelnar	7426efac9b	Lang - text "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" removed from dictionary	2018-11-22 18:36:38 +01:00
Robert Pelnar	123bef636a	Lang - text "Printer halted. kill() called!" removed from dictionary	2018-11-22 18:33:15 +01:00
Robert Pelnar	123725edd1	Lang - duplicate text "Some problem encountered, Z-levelling enforced ..." removed	2018-11-22 18:30:53 +01:00
Robert Pelnar	0fceade481	Lang - text "PowerUp" removed from dictionary	2018-11-22 18:24:21 +01:00
Robert Pelnar	f0e3021d33	Lang - text "openRoot failed" removed from dictionary	2018-11-22 18:20:24 +01:00
Robert Pelnar	1cbb261707	Lang - text "open" removed from dictionary	2018-11-22 18:18:25 +01:00
Robert Pelnar	f4bbce4142	Lang - text "open failed, File: " removed from dictionary	2018-11-22 18:15:22 +01:00
Robert Pelnar	72d47eaeba	Lang - text "ok" removed from dictionary	2018-11-22 18:12:19 +01:00
Robert Pelnar	1568b94e87	Lang - text "No Checksum with line number, Last Line: " removed from dictionary	2018-11-22 18:09:07 +01:00
Robert Pelnar	fd3cd9b551	Lang - texts "Mxxx Invalid extruder " removed from dictionary	2018-11-22 18:06:10 +01:00
Robert Pelnar	fdf9734161	Lang - text "checksum mismatch, Last Line: " removed from dictionary	2018-11-22 17:59:43 +01:00
Robert Pelnar	9c964277ac	Lang - text "error writing to file" removed from dictionary	2018-11-22 17:57:52 +01:00
Robert Pelnar	9f86a334c6	Lang - text "endstops hit: " removed from dictionary	2018-11-22 17:53:51 +01:00
Robert Pelnar	0baa6412fc	Lang - text "Cannot enter subdir: " removed from dictionary	2018-11-22 17:49:28 +01:00
Robert Pelnar	60e567b660	Lang - text " Last Updated: " removed from dictionary	2018-11-22 17:48:12 +01:00
Robert Pelnar	a1f03e9531	Lang - text " Free Memory: " removed from dictionary	2018-11-22 17:46:44 +01:00
Robert Pelnar	283e33dd69	Lang - text " cold extrusion prevented" removed from dictionary	2018-11-22 17:44:53 +01:00
Robert Pelnar	104353c0c5	Lang - text " PlannerBufferBytes: " removed from dictionary	2018-11-22 17:43:11 +01:00
Robert Pelnar	46fba48173	Lang - text "enqueing \"" removed from dictionary	2018-11-22 17:38:52 +01:00
Robert Pelnar	0ceeba38cb	Lang - text "Copy selected language from XFLASH?" shorted to "Copy selected language?"	2018-11-22 17:32:53 +01:00
Robert Pelnar	099fe216b6	Lang - text "KILLED. " removed from dictionaries	2018-11-22 17:26:01 +01:00
Robert Pelnar	37273d9fca	Lang - 'Auto Deplete' changed to 'SpoolJoin'	2018-11-22 17:19:38 +01:00
PavelSindler	49367c0b09	Merge pull request #1353 from XPila/V3_5 ... Lang - french translation	2018-11-22 17:18:42 +01:00
Robert Pelnar	f0624a9e97	Lang - some not localized texts marked as localized, formating fixed	2018-11-22 14:37:29 +01:00
XPila	3d76081c79	Merge pull request #1351 from PavelSindler/MK3_for_merging ... mmu: FINDA disabled by damaged/disconnected PAT9125 hotfix	2018-11-21 20:03:07 +01:00
PavelSindler	0e65790218	removed redundant code	2018-11-21 19:49:19 +01:00
PavelSindler	74a7341005	mmu: FINDA disabled by damaged/disconnected PAT9125 hotfix	2018-11-21 19:27:55 +01:00
PavelSindler	9fa587b206	Merge pull request #1350 from XPila/V3_5 ... V 3.5 - new translation	2018-11-21 15:23:41 +01:00
Robert Pelnar	2dc5439069	Lang - reserved space increased to 0x2f00 (12032 bytes)	2018-11-21 14:57:20 +01:00
Robert Pelnar	1bff138b50	Lang - sec.lang. reserved space increased to 0x2e00 (11776 bytes)	2018-11-21 14:52:14 +01:00
PavelSindler	18eb9ad69e	Merge pull request #1344 from PavelSindler/progress_bar_fix ... progress bar fix	2018-11-20 14:50:04 +01:00
Marek Bel	ab5b57df11	Style.	2018-11-19 20:41:14 +01:00
PavelSindler	cb7c701791	whitespace	2018-11-19 20:09:03 +01:00
PavelSindler	7d538cde6c	Retrieve settings (M501): initialize each item in feedrate and acceleration arrays separately	2018-11-19 20:05:58 +01:00
PavelSindler	e5dd4d757a	progress bar fix	2018-11-16 15:45:55 +01:00
MRprusa3d	ffe906c733	MeshBed Levelling Fail V	2018-11-14 16:45:49 +01:00
PavelSindler	0398c3c26b	Merge pull request #1335 from PavelSindler/T_codes ... version change	2018-11-13 17:49:26 +01:00
PavelSindler	51c80352e8	version change	2018-11-13 17:48:42 +01:00
PavelSindler	51b4858a87	Merge pull request #1334 from XPila/V3_5 ... PFW658 - disable extruder motor while changing filament with mmu2 (pr…	2018-11-13 16:10:24 +01:00
XPila	c41b045ea7	Merge pull request #1333 from PavelSindler/T_codes ... T-code fix	2018-11-13 16:09:52 +01:00
Robert Pelnar	bfc343c7c5	PFW658 - disable extruder motor while changing filament with mmu2 (prevents extruder motor overheating)	2018-11-13 16:04:46 +01:00
PavelSindler	15d0b083ed	whitespace	2018-11-13 15:58:21 +01:00
PavelSindler	17a1049f23	T-codes fix	2018-11-13 15:56:19 +01:00
PavelSindler	f297e72864	Merge pull request #1332 from XPila/V3_5 ... Fix PFW657 - filament runout detection is not working after autoload …	2018-11-13 14:10:11 +01:00
Robert Pelnar	d886ba1100	Fix PFW657 - filament runout detection is not working after autoload disabled from menu.	2018-11-13 14:05:15 +01:00
XPila	3d97d81734	Merge pull request #1329 from PavelSindler/M600_load_fil_message ... M600 filament load progress bar changes	2018-11-12 20:52:06 +01:00
PavelSindler	27db32cbd0	Merge pull request #1331 from XPila/V3_5 ... M907 fix - value in mA (PFW655)	2018-11-12 20:49:09 +01:00
Robert Pelnar	41b885c537	M907 fix - value in mA (PFW)	2018-11-12 20:39:25 +01:00
MRprusa3d	5e8e96b5d7	MMU module adjustment ... MMU module conditional compilation adjustment for MMU v1	2018-11-12 20:09:54 +01:00
PavelSindler	32da5bc039	progress bar time counted from feedrate and E - distance	2018-11-12 19:55:53 +01:00
PavelSindler	f4c1e7924f	M600: show progress bar during first filament load	2018-11-12 18:35:06 +01:00
PavelSindler	10a81ea768	version change	2018-11-09 19:16:53 +01:00
PavelSindler	5931d15566	whitespace	2018-11-09 18:31:28 +01:00
PavelSindler	c991c8b314	resume print fix: wait for heater() never disable steppers	2018-11-09 18:29:35 +01:00
XPila	10b79e918b	Merge pull request #1321 from PavelSindler/M600_load_fix ... M600 load messages synchronization fixed	2018-11-09 15:40:00 +01:00
PavelSindler	22cf2c6b6b	M600 load messages synchronization fixed	2018-11-09 15:31:44 +01:00
PavelSindler	7022373885	Merge pull request #1320 from XPila/V3_5 ... localization - lang-export.sh + po files + tmc2130_print_currents fixed (M913)	2018-11-09 15:27:43 +01:00
Robert Pelnar	3afebcc9cc	tmc2130_print_currents fixed (for obsolete M913)	2018-11-09 15:20:25 +01:00
PavelSindler	5f166374ab	Merge pull request #1319 from XPila/V3_5 ... Fix PFW651 - cannot upload MK3 languages with slic3r (firmware compil…	2018-11-09 13:10:51 +01:00
Robert Pelnar	6c13225f49	Fix PFW651 - cannot upload MK3 languages with slic3r (firmware compiled on linux arduino 1.8.5 + lto)	2018-11-09 10:45:16 +01:00
PavelSindler	0e7fb26dc5	Merge pull request #1316 from MRprusa3d/PFW-635 ... MeshBed Levelling Fail IV	2018-11-08 10:18:08 +01:00
PavelSindler	6d59f88a8e	Merge pull request #1315 from MRprusa3d/PFW-639 ... Bed PowerMonitor III	2018-11-08 10:08:31 +01:00
MRprusa3d	ccb58ae7c9	Revert "MeshBed Levelling Fail IV" ... This reverts commit bd554df02e.	2018-11-08 04:02:32 +01:00
MRprusa3d	bd554df02e	MeshBed Levelling Fail IV	2018-11-08 03:54:05 +01:00
MRprusa3d	fd45dd64dc	Bed PowerMonitor III	2018-11-08 03:32:00 +01:00
PavelSindler	3cccb125f7	Merge pull request #1313 from MRprusa3d/PFW-639 ... Bed PowerMonitor II	2018-11-07 13:50:50 +01:00
MRprusa3d	4ae857136d	Bed PowerMonitor II	2018-11-07 13:38:39 +01:00
PavelSindler	b80a0edac0	Merge pull request #1312 from mkbel/fix_long_press_modal ... Fix long press modal	2018-11-07 10:28:24 +01:00
PavelSindler	a5bbc75035	Merge pull request #1309 from mkbel/fix_1st_lay_cal ... PFW-634 Move T<nr> code just before extrude code to properly load fil…	2018-11-07 10:28:13 +01:00
Marek Bel	b4d4bfa667	Do not declare extern class in .cpp file, include appropriate header.	2018-11-06 20:54:53 +01:00
Marek Bel	95b0506284	Make lcd_long_press_active private.	2018-11-06 20:48:28 +01:00
Marek Bel	676434111e	Disable long press handler in modal dialogs (LCD update disabled).	2018-11-06 20:43:19 +01:00
Marek Bel	02e31433f4	PFW-634 Move T<nr> code just before extrude code to properly load filament in first layer calibration with MMUv2.	2018-11-06 15:46:37 +01:00
Robert Pelnar	9a68501039	MK2 variants compilable	2018-11-06 14:17:43 +01:00
PavelSindler	c3bdd21fa5	Merge pull request #1308 from MRprusa3d/PFW-635 ... MeshBed Leveling Fail II	2018-11-06 10:47:03 +01:00
MRprusa3d	46b2c93d60	MeshBed Leveling Fail III	2018-11-06 01:44:53 +01:00
MRprusa3d	9953518681	MeshBed Leveling Fail II	2018-11-06 01:28:47 +01:00
PavelSindler	908fffc19a	Merge pull request #1306 from PavelSindler/fsensor_q ... filament quality measurements disabled	2018-11-05 19:14:34 +01:00
PavelSindler	0a6ca7ffd0	Merge pull request #1305 from XPila/V3_5 ... PFW643 - removed M910-M918, implemented M907	2018-11-05 19:14:19 +01:00
PavelSindler	89ad02ac8c	filament quality measurements disabled	2018-11-05 18:37:36 +01:00
Marek Bel	50f9bf06be	Save 74B of flash memory.	2018-11-05 18:02:46 +01:00
Marek Bel	e95c2ad592	Display auto deplete as not available if filament sensor is disabled.	2018-11-05 17:43:07 +01:00
Robert Pelnar	d6b5f5a1c7	PFW643 - removed M910-M918, implemented M907	2018-11-05 16:15:27 +01:00
Marek Bel	ef5be690fb	Add autodeplete setting into tune menu.	2018-11-05 13:54:22 +01:00
PavelSindler	7e43b15b54	Merge pull request #1303 from PavelSindler/m600_idler ... M600: move extruder to the left to make space for idler opening	2018-11-05 10:38:51 +01:00
PavelSindler	78775e2f87	Merge pull request #1302 from PavelSindler/wizard_improvements ... Wizard improvements	2018-11-05 10:38:41 +01:00
PavelSindler	688c10247e	Merge pull request #1291 from XPila/MK3-new_bs ... lang update	2018-11-05 10:38:29 +01:00
PavelSindler	0a2ad97bc6	Merge pull request #1290 from PavelSindler/mmu_improvements ... mmu improvements: load to nozzle, gcodes for single material mode, M600 fix	2018-11-05 10:38:05 +01:00
PavelSindler	2619c6f7a1	Merge pull request #1283 from PavelSindler/crashdet_cancel ... canceling print after crash detection sets saved_priting flag to false	2018-11-05 10:37:51 +01:00
PavelSindler	aeeb2af0a4	whitespace	2018-11-05 00:15:36 +01:00
PavelSindler	b058ec7120	whitespace	2018-11-05 00:14:16 +01:00
PavelSindler	934b76ade3	wait message added	2018-11-05 00:12:46 +01:00
PavelSindler	3d24f5437c	leave Z move menu (hotfix)	2018-11-04 23:44:29 +01:00
PavelSindler	daef0eeb67	Merge pull request #1297 from MRprusa3d/PFW-635 ... MeshBed Leveling Fail	2018-11-04 23:33:29 +01:00
mkbel	e177c2b669	Merge pull request #1295 from PavelSindler/feedrate_change ... choosing filament from T? menu changes feedrate fixed	2018-11-04 23:13:03 +01:00
PavelSindler	515f2723d7	Merge pull request #1301 from XPila/V3_5 ... PFW644 + PFW638	2018-11-04 23:10:10 +01:00
PavelSindler	8afb83406e	Wizard for assembled printers (contains more steps now)	2018-11-04 23:08:23 +01:00
Robert Pelnar	33a29cd416	Fix PFW638 - remaining/elapsed time >100h displayed in hours	2018-11-04 20:27:09 +01:00
PavelSindler	e2d2fb58aa	Z calibraion: always ask user to clean nozzle	2018-11-04 18:47:08 +01:00
XPila	35fae8be1c	Merge pull request #1294 from PavelSindler/manage_response_heating ... mmu manage response: possibility to resume saved nozzle temperature	2018-11-04 18:31:47 +01:00
Robert Pelnar	1e05e1189d	Fix PFW644 - MK25 reports stopped, arduino 1.8.5.	2018-11-03 22:44:42 +01:00
MRprusa3d	73794b56cf	MeshBed Leveling Fail ... Z-leveling after MeshBed leveling failing	2018-11-02 23:03:14 +01:00
PavelSindler	e304319e15	choosing filament from T? menu changes feedrate fixed	2018-11-02 20:25:24 +01:00
PavelSindler	d18013e5a2	manage response now contains showing nozzle temperature and possibility to resume saved nozzle temperature	2018-11-02 19:31:10 +01:00
MRprusa3d	18a8ae5b8f	Bed PowerMonitor ... bed power monitoring correction	2018-11-01 20:55:42 +01:00
PavelSindler	aaf65051f9	M600: "is color clear?" menu synchronization	2018-11-01 18:28:52 +01:00
PavelSindler	1342c312a0	use feedrate 200mm/min for final feed (faster and better filament sensor function), show default welcome message when load is finished	2018-11-01 16:51:18 +01:00
PavelSindler	96ce324b7c	load to nozzle improved, unified feedrate and E-distance for final feed used in load filament function, M600 etc.	2018-11-01 16:29:09 +01:00
Robert Pelnar	a0e4acead3	lang - removed unused code and some service messages changed to "not translated"	2018-11-01 14:07:16 +01:00
PavelSindler	e80af46503	load to nozzle and Tx and Tc codes: intial version	2018-10-31 21:48:05 +01:00
PavelSindler	f445b6018e	canceling print after crash detection sets saved_priting flag to false	2018-10-28 11:06:10 +01:00
PavelSindler	4ecc00e4e3	M600: move extruder 100mm to the left to make space for opening idler	2018-10-26 18:19:00 +02:00
PavelSindler	6a82af487e	Merge pull request #1278 from XPila/MK3-new_bs ... New lang - fixed french langcode and comparsion in lang-clean script	2018-10-26 13:18:48 +02:00
mkbel	16c2f6fe8e	Merge pull request #1279 from PavelSindler/turn_on_FINDA ... mmu2: filament senor (FINDA) menu fix	2018-10-25 21:53:11 +02:00
PavelSindler	a9317b4d36	upstream/MK3 merge	2018-10-25 21:46:32 +02:00
mkbel	cdb06c65f3	Merge pull request #1275 from PavelSindler/3_4_2_branch_merging ... 3_4_2 branch merging into MK3	2018-10-25 21:45:51 +02:00
PavelSindler	0e0dbad871	#ifdef __cplusplus added to allow including to .c file	2018-10-25 21:06:37 +02:00
PavelSindler	01529f18d2	upstream/MK3 merge	2018-10-25 20:57:27 +02:00
PavelSindler	a6a81c6ea6	mmu2: filament senor (FINDA) can be switched ON/OFF from menu without dependency on pat9125 state	2018-10-25 18:26:26 +02:00
Robert Pelnar	d301aa0e8c	New lang - fixed french langcode and comparsion in lang-clean script	2018-10-25 18:16:36 +02:00
Robert Pelnar	7e9eaf0f4b	New lang, arduino 1.8.5 - disable multilanguage support by default	2018-10-23 17:32:52 +02:00
PavelSindler	bd8ca8d652	removed redefinition of functions in fsensor.cpp	2018-10-22 20:51:44 +02:00
PavelSindler	d1de9fff60	mmu_loop: missing return added	2018-10-22 20:38:32 +02:00
PavelSindler	d005005e22	Merge remote-tracking branch 'upstream/3_4_2' into 3_4_2_branch_merging	2018-10-22 20:33:38 +02:00
PavelSindler	940f436a5f	merge MK3_dev into MK3	2018-10-22 20:25:29 +02:00
PavelSindler	bc247ca02c	MK2.5 sw reset at setup function	2018-10-19 17:54:48 +02:00
Robert Pelnar	ac18eb67c0	New lang, arduino 1.8.5 - boot_app debug output ... + variable _uartout linkage fix + DEBUG_DCODE5	2018-10-18 16:20:14 +02:00
Robert Pelnar	563052d015	New lang, arduino 1.8.5 - language.c - DEBUG_SEC_LANG fix	2018-10-18 15:39:08 +02:00
Robert Pelnar	868c79e835	New lang, arduino 1.8.5 - language.h - section names, messages.h - extern "C" added	2018-10-18 14:41:32 +02:00
PavelSindler	b8f92fdfa9	MK2.5 printers set mmu to stealth mode (using Mx code), required mmu2 buildnr can be different for MK2.5 and MK3 printers	2018-10-18 02:44:16 +02:00
mkbel	0d9b502937	Merge pull request #1246 from PavelSindler/variants_max ... MK3: default max feedrate for x and y changed to 100mm/s	2018-10-10 16:46:34 +02:00
PavelSindler	bbd4f70f41	Merge pull request #1221 from XPila/MK3 ... Update fsensor in Manage_inactivity instead of main loop.	2018-10-10 13:12:12 +02:00
PavelSindler	866d6758c3	Merge pull request #1243 from mkbel/simplify_EEPROM_M500 ... Simplify eeprom m500	2018-10-10 13:11:17 +02:00
Marek Bel	9dff6431e6	Format fsensor documentation.	2018-10-09 22:33:54 +02:00
PavelSindler	809ae5a5f0	default max feedrate for x and y changed to 100mm/s	2018-10-09 20:03:28 +02:00
Marek Bel	9cae0c378a	Rename _EEPROM_writeData to EEPROM_writeData. Rename _EEPROM_readData to EEPROM_readData. Add return value to EEPROM_writeData to detect failure to write. Do not mark data as valid, if write has failed. Remove EEPROM_WRITE_VAR and EEPROM_READ_VAR macros. Make pos input only parameter. Convert EEPROM_OFFSET macro to typed constatant EEPROM_M500_base, it was defined in two places, leave it in one place. Use Config_StoreSettings() instead of erase_eeprom_section(). Compare float with 0xff byte by byte to avoid compiler warning "Dereferencing type punned pointer will break strict aliasing rules."	2018-10-08 20:24:56 +02:00
PavelSindler	c91c878408	Merge pull request #1202 from MRprusa3d/PFW-573 ... preHeatError	2018-10-08 16:12:33 +02:00
Marek Bel	1585dc66b0	Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 ... Known limitation: Unable to compile.	2018-10-08 15:58:49 +02:00
Marek Bel	c77672bf0f	PFW-608 Decrease wear of mass erase EEPROM and do it faster.	2018-10-05 18:11:26 +02:00
PavelSindler	436f5b5728	changed version	2018-10-04 17:40:38 +02:00
PavelSindler	d2aa13d333	Merge pull request #1199 from mkbel/document_gcodes1 ... Documentation: Put scattered and unscattered Gcode documentation toge…	2018-10-04 16:29:39 +02:00
Robert Pelnar	9960c80bf7	Additional check always with enabled oq_meassure ... + variant files	2018-10-04 16:12:41 +02:00
Robert Pelnar	f9d8c46802	Enable/disable optical quality meassurement in settings menu	2018-10-04 15:48:28 +02:00
Robert Pelnar	ced74b7ec2	Merge remote-tracking branch 'upstream/MK3' into MK3	2018-10-04 13:53:00 +02:00
Robert Pelnar	7882b3c975	Update fsensor in Manage_inactivity instead of main loop.	2018-10-03 17:29:24 +02:00
PavelSindler	3a58489c6a	Merge pull request #1169 from mkbel/remove_duplicate_debouncing_4 ... Remove duplicate debouncing 4	2018-10-02 11:21:17 +02:00
PavelSindler	bba1ffdb65	version change	2018-09-27 21:13:06 +02:00
PavelSindler	aefb4e5c09	Merge pull request #1200 from XPila/MK3 ... Filament sensor - fix invalid calculation of fsensor_counter in LA st…	2018-09-27 21:05:33 +02:00
Robert Pelnar	e50025cc7d	static_assert - portable solution compatible with C++98	2018-09-27 19:59:29 +02:00
PavelSindler	7e9220ada2	Merge pull request #1198 from PavelSindler/communication_timeouts ... communication timeouts fix	2018-09-27 11:23:58 +02:00
MRprusa3d	0184f06dcf	preHeatError ... correction of preHeatError detection	2018-09-27 04:23:00 +02:00
Robert Pelnar	c2f535b619	Filament sensor - fix invalid calculation of fsensor_counter in LA stepper. ... +decreased additional check sensitivity/sctrictness	2018-09-26 18:59:07 +02:00
Marek Bel	0e33db0064	Documentation: Put scattered and unscattered Gcode documentation together in process_commands documentation. Mention at least existence of all implemented commands. Document T<n> and T? commands.	2018-09-26 18:55:31 +02:00
PavelSindler	e6a00b8f53	send busy messages when checking for filament presence	2018-09-25 19:14:57 +02:00
Marek Bel	4151e19781	Remove attribute packed. It is not needed on 8-bit platform. Change of platform would be detected by static_assert (sizeof(M500_conf) == 188).	2018-09-25 16:27:20 +02:00
Marek Bel	d80fcab66c	Disable filament sensor response quality check.	2018-09-25 15:50:50 +02:00
Marek Bel	19c1ba6274	Remove duplicate condition. This condition was already in if(mmu_enabled) {} else branch.	2018-09-25 14:25:03 +02:00
Marek Bel	ccfcc6f989	Document.	2018-09-24 18:32:01 +02:00
Marek Bel	3662f60f8f	if max_feedrate_silent and max_acceleration_units_per_sq_second_silent were never stored to eeprom, use default values;	2018-09-24 18:13:20 +02:00
Marek Bel	c38fef281d	Use cs.max_feedrate_silent, cs.max_acceleration_units_per_sq_second_silent from ConfigurationStore.	2018-09-24 17:33:58 +02:00
Marek Bel	ca179a2d18	Use cs.filament_size from ConfigurationStore.	2018-09-24 17:29:02 +02:00
Marek Bel	e225e9cab0	Use cs.volumetric_enabled from ConfigurationStore.	2018-09-24 17:12:16 +02:00
Marek Bel	a201128b20	Use cs.retract_length, cs.retract_feedrate, cs.retract_zlift, cs.retract_recover_length and cs.retract_recover_feedrate from ConfigurationStore.	2018-09-24 17:10:25 +02:00
Marek Bel	7e593e6922	Use cs.autoretract_enabled from ConfigurationStore.	2018-09-24 17:03:10 +02:00
Marek Bel	20ba2b1c79	Use cs.bedKp, cs.bedKi and cs.bedKd from ConfigurationStore.	2018-09-24 16:57:48 +02:00
Marek Bel	54bcc8aa52	Use cs.Kp, cs.Ki and cs.Kd from ConfigurationStore.	2018-09-24 16:54:50 +02:00
Marek Bel	f2ae3fb1f7	Use cs.zprobe_zoffset from ConfigurationStore.	2018-09-24 16:47:57 +02:00
Marek Bel	959d0069fa	Use cs.add_homing from ConfigurationStore.	2018-09-24 16:42:28 +02:00
Marek Bel	ac7c062161	Use cs.max_jerk from ConfigurationStore.	2018-09-24 16:35:33 +02:00
Marek Bel	bb66bfe6a7	Use cs.minsegmenttime from ConfigurationStore.	2018-09-24 16:22:50 +02:00
mkbel	0e7afc67ca	Merge pull request #1175 from PavelSindler/eeprom_version ... M500 EEPROM version update and M500 EEPROM block size check	2018-09-24 16:19:55 +02:00
Marek Bel	10428b30d9	Use cs.mintravelfeedrate from ConfigurationStore.	2018-09-24 16:01:58 +02:00
PavelSindler	cd438c5c00	whitespace	2018-09-24 16:01:31 +02:00
PavelSindler	740e922b87	EEPROM M500 block size check for reading stored data added	2018-09-24 16:00:23 +02:00
Marek Bel	26e2fd1c76	Use cs.minimumfeedrate from ConfigurationStore.	2018-09-24 15:57:24 +02:00
Marek Bel	b8fefceb4d	Use cs.retract_acceleration from ConfigurationStore.	2018-09-24 15:53:35 +02:00
Marek Bel	7dbe0afdc4	Use cs.acceleration from ConfigurationStore.	2018-09-24 15:47:36 +02:00
Marek Bel	cee51cf9c3	Use cs.max_acceleration_units_per_sq_second_normal from ConfigurationStore.	2018-09-24 15:40:35 +02:00
Marek Bel	02becb5e6a	Use cs.max_feedrate_normal from ConfigurationStore.	2018-09-24 15:09:19 +02:00
PavelSindler	053b94b711	remove "start" duplicity in setup	2018-09-24 14:57:46 +02:00
Marek Bel	3f28632443	Use cs.axis_steps_per_unit from ConfigurationStore.	2018-09-24 14:54:41 +02:00
Marek Bel	d611cad087	Temporary hide M500_conf cs to allow automated renaming.	2018-09-24 14:42:01 +02:00
Marek Bel	e94dc1341a	Use M500_conf cs in Config_ StoreSettings, RetrieveSettings and ResetDefault.	2018-09-24 14:34:43 +02:00
Marek Bel	991db0e71d	Finish default_conf.	2018-09-23 23:36:01 +02:00
Marek Bel	d9e2dcc736	Incomplete.	2018-09-23 22:21:28 +02:00
Marek Bel	58af1ae4c4	Add configuration store struct.	2018-09-21 20:52:44 +02:00
PavelSindler	d8dc2eef7a	if max_feedrate_silent and max_acceleration_units_per_sq_second_silent were never stored to eeprom, use default values; eeprom_version changed back to V2	2018-09-21 15:42:28 +02:00
PavelSindler	1c33b673c0	comment update	2018-09-19 18:43:27 +02:00
PavelSindler	3d57d504ba	Merge pull request #1174 from mkbel/fix_runout_resume ... Fix runout resume	2018-09-19 18:29:32 +02:00
Marek Bel	2607a0c4ed	Update documentation.	2018-09-19 17:22:06 +02:00
Marek Bel	b92b307ee8	Make variables constant.	2018-09-19 17:21:45 +02:00
Marek Bel	cce8131070	Add missing s for seconds of print time.	2018-09-19 17:20:41 +02:00
Marek Bel	b5bb40474d	Fix print time overflow.	2018-09-19 17:17:32 +02:00
PavelSindler	0a5394a20e	defines moved to eeprom.h	2018-09-19 15:10:10 +02:00
PavelSindler	752aec37fb	M500 EEPROM version changed; if EEPROM_M500_SIZE is not updated, data are not stored	2018-09-19 14:36:26 +02:00
Marek Bel	9868dd766e	Fix print not recovered when filament sensor is disabled during filament change initiated by filament run out.	2018-09-19 14:22:08 +02:00
Marek Bel	a5a7b1f1d6	Move functions definitions behind variable definitions. (No change in functionality.)	2018-09-19 14:08:31 +02:00
Marek Bel	05d3b7032d	Update documentation.	2018-09-18 17:48:11 +02:00
Marek Bel	a7fdfdd258	Put repetitive code into separate function. No change in functionality.	2018-09-18 17:15:13 +02:00
Marek Bel	6ee97468ee	Remove lcd_buttons_update() call from all other places than interrupt. There is no known reason, why lcd_buttons_update() should be called from multiple places and multiple contexts. Remove mutex, which is not needed anymore, and wasn't implemented properly anyway (Operation was not atomic.).	2018-09-18 16:05:49 +02:00
Marek Bel	f532da4b17	Remove duplicate button debouncing code. Save 254B flash.	2018-09-18 14:39:01 +02:00
Marek Bel	90a10a692a	Enable button debouncing also in modal mode (!lcd_update_enabled). In lcd_clicked() consume click event immediately.	2018-09-18 14:38:50 +02:00
Marek Bel	ab2d350ed1	Don't enable lcd update in lcd_show_fullscreen_message_and_wait_P(). Don't show menu in wizard when ejecting filament.	2018-09-17 21:23:13 +02:00
Marek Bel	a687b8e64a	Don't enable lcd update inside mmu_eject_filament().	2018-09-17 17:12:36 +02:00
Marek Bel	f496076508	Remove redundant code. No change in functionality.	2018-09-14 18:33:03 +02:00
Marek Bel	635a1b4cd8	Add possibility to to select preheat temperature when unloading filament in first layer calibration wizard. ... Known limitations: During filament eject, menu is shown for some moment.	2018-09-14 18:29:14 +02:00
Marek Bel	fe30e58fb5	Add possibility to unload filament from wizard before first layer calibration, if it is not PLA. ... Known limitations: Preheat temperature other than PLA can not be selected. During filament eject, menu is shown for some moment.	2018-09-14 16:06:25 +02:00
Marek Bel	d14822b22f	Give wizard states human readable names. Use uint8_t as underlying type - saves 20B of FLASH memory.	2018-09-13 16:37:41 +02:00
Marek Bel	8235f0f869	Merge branch 'MK3_dev' into add_cancel	2018-09-12 19:38:26 +02:00
Marek Bel	7bc46323e2	Update pause print documentation.	2018-09-12 18:35:26 +02:00
Marek Bel	de2100ac7b	Merge branch 'MK3' into MK3_dev	2018-09-12 15:22:12 +02:00
PavelSindler	0d4f4fe933	Merge pull request #1143 from PavelSindler/lang2 ... lang fix	2018-09-12 09:38:18 +02:00
PavelSindler	45066ebddc	lang fix	2018-09-12 09:37:16 +02:00
PavelSindler	30d54be9de	Merge pull request #1142 from PavelSindler/lang2 ... changed version	2018-09-12 09:20:32 +02:00
PavelSindler	298950e601	changed version	2018-09-12 09:19:23 +02:00
Robert Pelnar	3e84bf6341	Lang update (translation + increased reserved space)	2018-09-12 02:45:13 +02:00
Marek Bel	13b67f0e0a	Add Cancel item into PLA filament selection menu initiated by first layer calibration with MMU.	2018-09-11 22:33:13 +02:00
Marek Bel	ada7cffd32	Open menu to select filament before first layer calibration if MMU unit is present.	2018-09-11 19:53:29 +02:00
PavelSindler	96aada9061	load filament messages, czech language missing translation readded	2018-09-11 18:25:38 +02:00
Marek Bel	5649d6c3c0	Precede active filament on status screen with letter F.	2018-09-11 17:27:10 +02:00
Marek Bel	98264808dc	Change gcode "T?" question from "Choose extruder:" to "Choose filament" and answers from "Extruder 1" .. "Extruder 5" to "Filament 1" .. "Filament 5".	2018-09-11 17:16:13 +02:00
Marek Bel	46df46f482	Add possibility to use other filaments in LCD_COMMAND_V2_CAL.	2018-09-11 17:03:20 +02:00
Marek Bel	19a1ccdc76	Rename choose_extruder_menu() to choose_menu_P(), add parameters to make it reusable.	2018-09-11 16:51:00 +02:00
Marek Bel	6c6354b2cb	Do not preheat nozzle before loading filament to MMU in first layer calibration wizard. ... Show insert PLA filament to the first tube of MMU instead of "to the extruder". First layer calibration wizard with MMU is now functional. But there is no option to unload filament from wizard.	2018-09-11 16:03:46 +02:00
Marek Bel	0fcd2cf2a1	Merge branch 'MK3_dev' into fix_mmu_1st_lay_cal	2018-09-11 15:26:35 +02:00
PavelSindler	d9a2fe70ec	missing declaration fix	2018-09-11 11:06:37 +02:00
PavelSindler	c023fb12d5	add choose filament messages	2018-09-11 09:50:50 +02:00
PavelSindler	90e3ae5464	Merge pull request #1127 from XPila/MK3 ... Lang update, french translation	2018-09-11 09:44:02 +02:00
Robert Pelnar	4ca300bc39	Lang update, french translation ... +resized reserved space	2018-09-11 03:43:05 +02:00
Marek Bel	b3bc71b45b	Merge remote-tracking branch 'prusa3d/MK3' into MK3_dev	2018-09-10 23:52:51 +02:00
PavelSindler	25a46557d1	merge with upstream	2018-09-10 22:11:32 +02:00
PavelSindler	8a9f066c1b	choose_extruder_menu: extruder -> filament	2018-09-10 22:09:37 +02:00
Marek Bel	cc08d660f7	Always use filament 1 for first layer calibration when MMU is present. ... Lift Z when moving from intro line to meander. For MMU, print longer intro line to allow load to nozzle.	2018-09-10 20:55:50 +02:00
PavelSindler	1bb9e9ed92	MMU_DEBUG	2018-09-10 20:39:28 +02:00
PavelSindler	6fa798aa83	init	2018-09-10 20:08:13 +02:00
PavelSindler	1253fb338a	wizard hotfix	2018-09-10 18:02:54 +02:00
Marek Bel	764e5c9769	Merge branch 'MK3' into MK3_dev	2018-09-09 22:52:01 +02:00
Marek Bel	5a6ef00cfc	Do not unload filament from nozzle when touching bed in the end of first layer calibration. Unload it after reaching home position.	2018-09-07 10:50:23 +02:00
Marek Bel	ebfbf4ac3f	Merge branch 'MK3' into MK3_dev	2018-09-07 09:24:45 +02:00
mkbel	cbc506c379	Merge pull request #1110 from PavelSindler/lcd_clicked_error_fix ... lcd_clicked() fix (PFW-534 and PFW-546)	2018-09-07 09:07:03 +02:00
Marek Bel	001680bbdc	Merge branch 'MK3' into time_remaining_fix ... # Conflicts: # Firmware/Marlin_main.cpp	2018-09-07 08:21:36 +02:00
mkbel	801f8e93e8	Merge pull request #1112 from PavelSindler/MK25_time_remaining ... MK25: always show "normal mode" remaining time (PFW-553)	2018-09-07 08:05:16 +02:00
PavelSindler	2f02828273	time remaining fix	2018-09-07 02:02:35 +02:00
PavelSindler	66305b3e04	MK25: always show "normal mode" remaining time	2018-09-06 23:05:36 +02:00
PavelSindler	48bf5d3a75	Merge pull request #1104 from mkbel/MK3_dev ... Merge MK3 into Mk3_dev	2018-09-06 21:01:29 +02:00
PavelSindler	dbc0654b1c	Merge pull request #1108 from mkbel/pause_print ... Pause print	2018-09-06 21:01:16 +02:00
PavelSindler	48f5da9cb8	lcd_clicked fix	2018-09-06 20:54:51 +02:00
Marek Bel	0e50c388af	Save 1K flash memory.	2018-09-06 15:06:46 +02:00
Marek Bel	0d99dc0a3f	PFW-543 Add filament ramming when unloading filament with MMU.	2018-09-06 15:06:33 +02:00
Marek Bel	5d1e59cec3	Fix problem that nozzle temperature stays 0 if resume print is invoked from menu earlier than pause movements are finished.	2018-09-06 13:20:24 +02:00
Marek Bel	0fe48de4af	Remove feedmultiplyBckp global variable. Remove redundant isPrintPaused = true assignment, as it is already done in lcd_pause_print(). Remove unused saved_feedmultiply and fanSpeedBckp prototypes. Move isPrintPaused = true assignment to safer location, as LCD_COMMAND_LONG_PAUSE is not reached if lcd_commands_type is not LCD_COMMAND_IDLE.	2018-09-06 12:23:21 +02:00
Marek Bel	05a0b9c939	Remove fanSpeedBckp global variable.	2018-09-06 11:41:44 +02:00
Marek Bel	40990c4deb	Remove saved_feedmultiply global variable.	2018-09-06 11:30:06 +02:00
Marek Bel	b43c8dad74	Remove HotendTempBckp global variable.	2018-09-06 10:05:59 +02:00
Marek Bel	d71311f13f	Remove redundant HotendTempBckp from crash detection recover.	2018-09-06 09:41:37 +02:00
Marek Bel	920d828833	Rename lcd_sdcard_pause() to lcd_pause_print() to reflect, that also USB printing could be possible to pause. Unite it with pause_print() and use new (immediate) pause mechanism in all places where old mechanism was used. Rename resume_print() to lcd_resume_print() and make it global, unite it with lcd_sdcard_resume() and use it also in place, where lcd_commands_type = LCD_COMMAND_LONG_PAUSE_RESUME was used. Remove LCD_COMMAND_LONG_PAUSE_RESUME lcd_command_type. Remove unused pause_lastpos[].	2018-09-06 08:43:54 +02:00
Marek Bel	67b2456ad9	Merge branch 'MK3' into MK3_dev	2018-09-05 21:48:29 +02:00
Marek Bel	74be7677cf	Fix problem, that current_position is rewritten after long_pause() call.	2018-09-05 21:10:05 +02:00
Marek Bel	4b47a74d1d	Remove unused declarations from tmc2130.cpp. Move used declaration to Marlin.h.	2018-09-05 18:14:32 +02:00
PavelSindler	ed43913c5c	Merge pull request #1099 from mkbel/fix_compiler_warnings ... Fix compiler warnings	2018-09-05 16:53:51 +02:00
PavelSindler	40679dcb3a	Merge branch 'MK3' into MK3	2018-09-05 00:06:48 +02:00
Marek Bel	a5db084b70	Move resuming nozzle temperature to restore_print_from_ram_and_continue(). ... Known limitations: Unused code not removed. Unload filament moves extruder to print position.	2018-09-04 14:56:20 +02:00
MRprusa3d	35cf3f3a61	Time info ... suffix for doubt time estimation (i.e. if feed rate changed)	2018-09-04 14:39:46 +02:00
Marek Bel	2abd2a6cab	Resume print fan. ... Known limitations: Unused code not removed. Unload filament moves extruder to print position.	2018-09-04 11:13:51 +02:00
Marek Bel	acef0578a5	Don't move before reaching nozzle temperature when resuming the print. ... Known limitations: Doesn't resume print fan. Unused code not removed. Unload filament moves extruder to print position.	2018-09-04 10:07:52 +02:00
Marek Bel	d54e629950	Retract, lift Z, move away in XY, disable fan and nozzle heating. Resume nozzle heating. ... Known limitations: Doesn't wait for nozzle temperature reaching set temperature before moving to print area. Doesn't resume print fan. Unused code not removed.	2018-09-04 08:53:27 +02:00
Marek Bel	af08e16426	Use stop_and_save_print_to_ram() and restore_print_from_ram_and_continue() pair to pause print from menu. Move declaration of those functions to marlin.h. Move declaration of FSensorStateMenu to ultralcd.h. ... Known limitations: Filament is not retracted, extruder is not lifted in Z and moved to rear left corner in XY. Nozzle heating is not turned off nor restored. Unused code is not removed.	2018-09-04 08:13:56 +02:00
Marek Bel	63a215b0c3	Remove unused variable chars.	2018-09-03 20:48:03 +02:00
Marek Bel	cbf633cfd4	Remove unused variable chars.	2018-09-03 20:47:12 +02:00
Marek Bel	c95b463e0b	Remove unused variable yes. Remove redundant tmp_extruder assignment.	2018-09-03 20:44:40 +02:00
Marek Bel	517fbb66bf	Save 1K flash memory.	2018-09-03 20:00:46 +02:00