3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
657 Commits 3 Branches 78 Tags 40 MiB
09e0c566e8
Commit Graph

474 Commits

Author SHA1 Message Date
XPila
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking 
Mk3 stepper blocking
 2018-01-23 13:15:59 +01:00
bubnikv
69f97e0ec3 Separated the "Unknown" build from the "Development" build. 
Documented purpose of the various build types.
 2018-01-22 17:41:05 +01:00
bubnikv
a94e266cf1 Documented CPU load and frequency of the following interrupts: 
9.  ISR(INT7_vect) 			- Fan signal interrupt
26. ISR(M_USARTx_RX_vect)	- USB to serial RX
37. ISR(USART1_RX_vect)		- R-PI serial RX
 2018-01-20 16:20:51 +01:00
bubnikv
815dfcb14b Implemented a stepper timer reset after a long blocking cli() 
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
 2018-01-20 15:39:21 +01:00
bubnikv
17a8e2db01 Documented the interrupt blocking by a main thread by its maximum time. 
Added a debug output to serial line on stepper timer overflow.
 2018-01-20 14:58:30 +01:00
bubnikv
9e534c1990 Minimize risk of stepper routine interrupt blocking by reorganizing 
the routine to move the G-code line length from the command queue
to the planner queue.
 2018-01-20 14:37:22 +01:00
bubnikv
7edce0b890 Only show the debug menu in the DEBUG_BUILD. 2018-01-18 16:43:40 +01:00
bubnikv
330f1576fc Support for debug builds: 
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
 2018-01-18 16:24:25 +01:00
PavelSindler
b5f8b1d97c
Merge pull request #412 from PavelSindler/debug_version 
initial message for debugging fw version
 2018-01-18 13:18:16 +01:00
PavelSindler
e60cb2a79e unload filament sequence same as in M600 2018-01-17 21:54:34 +01:00
PavelSindler
4843f2c48e initial message not shown on release candidate versions 2018-01-17 17:38:34 +01:00
PavelSindler
bfa675c1a4 initial message for debugging fw version 2018-01-17 16:00:19 +01:00
Robert Pelnar
36e4e39c85 3.1.1-RC5 build 148 2018-01-16 19:25:09 +01:00
XPila
515420ce06
Merge pull request #407 from PavelSindler/MK3_for_merging 
maiden eeprom: tmc2130_mode is set to normal
 2018-01-16 17:10:38 +01:00
Robert Pelnar
c2710fea63 crashdetection limits changed (X=48, Y=64) 2018-01-16 17:04:21 +01:00
PavelSindler
fbf947b75c maiden eeprom: tmc2130_mode is set to normal 2018-01-16 16:56:58 +01:00
Robert Pelnar
6b5f9253d6 build 147 2018-01-16 16:50:05 +01:00
XPila
026f68fd6f
Merge pull request #404 from PavelSindler/xyz_fixes 
xyz homing hotfix, xyz cal. status changed
 2018-01-16 01:39:57 +01:00
XPila
9efa1d3a03
Merge pull request #403 from PavelSindler/M600_update 
timeout fix and unload message shortened
 2018-01-16 01:39:18 +01:00
Robert Pelnar
f30da4bbca babystep synchronisation 2018-01-16 01:34:44 +01:00
PavelSindler
06c6cc119b xyz homing hotfix, xyz cal. status changed 2018-01-16 01:00:09 +01:00
PavelSindler
d8117eab66 timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened 2018-01-15 17:39:42 +01:00
Robert Pelnar
981a681e52 Temperature ISR synchronization, M600 - faster unload 2018-01-15 17:29:07 +01:00
XPila
9d52d017df
Merge pull request #401 from PavelSindler/rx_buffer 
get command update
 2018-01-15 15:28:19 +01:00
XPila
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update 
M600 update
 2018-01-15 15:27:41 +01:00
Robert Pelnar
aaf4e0a5e0 fixed bug - fsensor synchronization (b146) 2018-01-15 15:23:06 +01:00
PavelSindler
1d3f6e8be5 flush rx buffer in case that it was full 2018-01-15 12:18:21 +01:00
PavelSindler
9e7686b77f unload changes reverted back 2018-01-15 11:35:49 +01:00
PavelSindler
c36af887b7 M600 has timeout for nozzle, different procedure for unload 2018-01-15 11:30:28 +01:00
Robert Pelnar
9aedaa8fe7 build 146 
hard limits
fsensor overflow fix
 2018-01-14 23:59:43 +01:00
PavelSindler
3201fd1538 removed duplicit comment 2018-01-14 19:36:30 +01:00
Robert Pelnar
552b1f03b1 build 145 
fixed - finishstatus declaration
 2018-01-13 19:16:09 +01:00
XPila
78d6088d48
Merge pull request #392 from PavelSindler/fail_stats 
filament fails counter fix
 2018-01-12 22:23:18 +01:00
PavelSindler
8bd84ba4fd
Merge pull request #396 from XPila/MK3 
Mk3
 2018-01-12 22:08:50 +01:00
bubnikv
5ed9233abc Missed a bit with the last commit. 2018-01-12 22:01:53 +01:00
Robert Pelnar
530dfba417 Status message limit (PFW-124) 2018-01-12 21:21:21 +01:00
bubnikv
82304a2268 Slight optimization of the fan speed interrupt routine by accessing 
the Arduino millis() without locking interrupts.
 2018-01-12 21:16:29 +01:00
Robert Pelnar
ebf6d08fae Crash detection - message on lcd (PFW-115) 2018-01-12 21:02:49 +01:00
bubnikv
135dda1bff Slight optimization of the stepper timer routine. 
Use WRITE_NC instead of WRITE for writing into the slow ports.
 2018-01-12 21:01:01 +01:00
bubnikv
3e6d853364 Debugging of the stepper timer routine. When enabled through 
DEBUG_STEPPER_TIMER_MISSED, the printer is halted on stepper timer overflow
and an error message is displayed.
 2018-01-12 20:51:14 +01:00
PavelSindler
23b78da2f5 filament fails counter fixed 2018-01-12 20:21:07 +01:00
bubnikv
26747d7236 Definition of 8 pins on the Einsy 0.4 board connected to pin headers 
to be monitored by an 8 channel logic analyzer, for example the Saleae.
 2018-01-12 20:18:20 +01:00
bubnikv
db985065ff WRITE_NC macro for non-critical (non-synchronized) access to 
slow ports. The WRITE macro stores the CPU bits on the stack first,
then locks the interupts, reads the port, sets a bit, writes the port
and then finally reverts the CPU bits. The WRITE_NC does not lock
the interrupts, therefore it may only be used where it cannot
be interrupted.
 2018-01-12 20:15:59 +01:00
PavelSindler
1fbed53200 initial 2018-01-12 20:01:22 +01:00
Robert Pelnar
0f46fa0c37 blocking messages in settings/tune menu (PFW104) 
switch normal/stealth (PFW110)
 2018-01-12 19:54:32 +01:00
PavelSindler
a4be2af538 commit nr updated 2018-01-11 17:51:30 +01:00
PavelSindler
f5ed12817d
Merge pull request #388 from PavelSindler/first_layer_saving 
Live adjust Z saving using timeout
 2018-01-11 17:49:40 +01:00
PavelSindler
5c1db284b0 remove setting live adjust status in setup function 2018-01-11 17:48:58 +01:00
PavelSindler
97bd56d560
Merge pull request #386 from PavelSindler/selftest_swapped_fans 
manual check for swapped fans
 2018-01-11 17:45:23 +01:00
bubnikv
cfae8f859d
Merge branch 'MK3' into fw_versions 2018-01-11 16:58:47 +01:00