3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,853 Commits 3 Branches 78 Tags 40 MiB
0c383e20b3
Commit Graph

3021 Commits

Author SHA1 Message Date
Yuri D'Elia
8d490f941a Make use of the CRITICAL_SECTION macros in lcd_print_stop 2019-12-16 16:39:20 +01:00
Yuri D'Elia
0cc68228f8 Unretract when resuming a paused print 2019-12-16 16:33:11 +01:00
DRracer
955c88cf68
Merge pull request #2370 from wavexx/no_resume_while_resuming 
Do not allow to resume a print twice while waiting for the hotend
 2019-12-16 16:26:02 +01:00
Yuri D'Elia
faa76df2fe Fix the "Stop print" behavior from the LCD 
Correctly cleanup the printer state when stopping the current print:

- Disable interrupts while aborting the planner/queue to ensure
  new serial commands are not inserted while aborting
- _Always_ call planner_abort_hard() to interrupt any pending move!
- Clear the saved_target, which might be set when calling stop
  from within a paused state. Create a new function to clear the
  paused state for future use.
- Do not disable/reset the MBL: doing so will destroy the ability to
  restart correctly using M999.
 2019-12-16 15:52:37 +01:00
Alex Voinea
a8e6020238
Fix VERBOSITY 2019-12-16 15:21:55 +02:00
Yuri D'Elia
348bbbffb0 Do not allow to resume a print twice while waiting for the hotend 
Clear isPrintPaused just prior to restore_print_from_ram_and_continue.
 2019-12-15 22:22:44 +01:00
DRracer
d4fab1a713
Merge pull request #2304 from 3d-gussner/MK3-Fix_M81 
Fix M81 Turn off Power Supply...
 2019-12-15 11:52:56 +01:00
DRracer
c45d4f4bba
Merge pull request #2088 from rhounsell/MK3 
Fix for Toshiba FlashAir (or other) SD card initialization
 2019-12-15 11:46:56 +01:00
DRracer
44288bfe90
Merge pull request #2309 from leptun/MK3_fix_MMU_pause_time 
Fix MMU needs user attention Statistics error
 2019-12-15 11:04:57 +01:00
DRracer
d6ac9e4638
Merge pull request #2342 from vintagepc/2306-hard-reset-homing-fails 
Fix #2306 hard reset homing fails
 2019-12-15 10:51:52 +01:00
DRracer
c122399020
Merge pull request #2270 from leptun/MK3-PFW-1024 
PFW-1024
 2019-12-15 10:25:37 +01:00
DRracer
d68d9c7fef
Merge pull request #2058 from leptun/MK3_fix_warnings 
Fix "LANG_MODE 0" warnings
 2019-12-15 09:29:27 +01:00
Alex Voinea
770fcd7c42
Merge branch 'MK3' into MK3-PFW-1024 2019-12-14 10:08:52 +02:00
DRracer
6ab3b20ce1
Merge pull request #2348 from leptun/MK3_fix_kill 
Fix kill messages
 2019-12-13 18:30:27 +01:00
DRracer
1423de10a9
Merge pull request #2362 from leptun/MK3_Fix_Lang_64K_limit 
Fix optiboot erase function after address 0xFFFF. Allows language files greater than 64K
 2019-12-13 13:59:23 +01:00
DRracer
30cee7afca
Merge pull request #2353 from wavexx/lcd_pause_fixes 
Fix the LCD pause (regression)
 2019-12-13 13:53:29 +01:00
DRracer
838cec75ec
Merge pull request #2352 from wavexx/fix_m603_regression 
Use lcd_print_stop() in M603, fix octoprint regression
 2019-12-13 13:52:40 +01:00
DRracer
a1bc4cc5dc
Merge pull request #2332 from leptun/MK3_Octoprint_fIxes 
Do not check for fanError if it is not enabled on resume
 2019-12-13 13:47:56 +01:00
Alex Voinea
89dfb00b04
Fix optiboot erase function after address 0xFFFF 2019-12-08 08:43:43 +02:00
Yuri D'Elia
0b9123ce24 Fix Live K, allow "Advance K" to be translated 2019-12-05 15:18:24 +01:00
Yuri D'Elia
5122f79a39 Merge remote-tracking branch 'upstream/MK3' into MK3_LA15 2019-12-04 17:27:23 +01:00
3d-gussner
17e23693eb Fixed stuipid copy paste error 2019-12-04 14:21:43 +01:00
3d-gussner
0cafd10378 minor fix 2019-12-04 13:43:19 +01:00
3d-gussner
f7bfca3061 Fix merge issues 2019-12-04 13:39:56 +01:00
3d-gussner
7da1db2f25 Merge remote-tracking branch 'upstream/MK3' into MK3-Gcode_documentation 2019-12-04 13:35:09 +01:00
3d-gussner
fb3c65b3dc fixed links to RR Wiki 2019-12-04 12:38:43 +01:00
3d-gussner
cdc6beaf6f Added M910 -> M918 2019-12-04 12:25:33 +01:00
3d-gussner
a5f3027ee1 D2130 updated 
Needs review
 2019-12-04 11:38:29 +01:00
Yuri D'Elia
8448b8d413 Keep destination updated in an aborted plan as well 
When aborting the plan destination is updated anyway to reflect the latest
position. There's no use in this additional check.
 2019-12-03 20:37:13 +01:00
Yuri D'Elia
063d0421ac Call long_pause from the main loop (again) 
After calling stop_and_save_print_to_ram, perform the parking moves
within the main loop as done before PR#1899 to avoid planning within
an interrupted move (which would clear the abort flag too soon).
 2019-12-03 20:37:13 +01:00
Yuri D'Elia
d60230e494 Add some documentation 2019-12-03 20:37:13 +01:00
Yuri D'Elia
792d7ca6dc Turn off heaters just prior to retraction to limit oozing 2019-12-03 20:37:13 +01:00
Yuri D'Elia
4fce74140a Also abort planning in stop_and_save_print_to_ram 
Similarly to resume_print_from_ram_and_continue, abort any
planning in mesh_plan_buffer_line already in stop_and_save_print_to_ram
in case it is called for pausing only.
 2019-12-03 20:37:09 +01:00
3d-gussner
0ce7c51c1d Added more D-codes to RR Wiki and doxygen 
D-1, D80, D81, D106
 2019-12-03 20:02:58 +01:00
Yuri D'Elia
454e99dbb5 Use lcd_print_stop() in M603, fix octoprint regression 
M603 shouldn't report a fatal error state.
Use lcd_print_stop().

Regression introduced in PR #2274
 2019-12-03 16:51:59 +01:00
Alex Voinea
56193ea252
Merge branch 'MK3' into MK3_TONE 2019-11-29 23:16:46 +02:00
Alex Voinea
e7f2577233
Fix kill messages 2019-11-29 22:49:22 +02:00
DRracer
15bfb7013d
Merge pull request #2274 from wavexx/fix_mesh_plan_buffer_line 
PFW-1028: Fix recovery from filament sensor checks / crash detect / power panic
 2019-11-29 15:18:15 +01:00
Alex Voinea
779423f0e7
Move hardcoded values to variants 2019-11-29 15:06:54 +02:00
Alex Voinea
a413cfbb9a
Merge branch 'MK3' into MK3-PFW-1024 2019-11-29 13:07:45 +02:00
Yuri D'Elia
dbe2ed4150 Fix pause/resume when using M25/M601 
Remove the conflicting and mostly useless card.paused flag (the printing
is either paused, or not) and switch to isPrintPaused only which
accounts for both cases (SD/USB) correctly.

Fix M27/getStatus to show the current real status of the SD print.

Synchronize the queue on M601, as required to precisely pause the print
at the correct instruction.

Alias M25 to M601, which when combined with PR #1899 fixes issue #1614.

Guard against incorrect usage in M601, M602 and M603.
 2019-11-28 17:37:58 +01:00
Yuri D'Elia
18eaf21baf Halve memory usage of saved feedrate 
Truncate the saved feedrate to an uint16_t.
This is more than sufficient for recovery.
 2019-11-28 17:16:37 +01:00
Yuri D'Elia
17176c1df2 Save/restore the default feedrate correctly 
Since the global feedrate can be similarly modified for moves ahead of
time, save the original feedrate in the planner as we do for
gcode_target.

This avoids having to undo feedmultiply (and machine limits!) from
"nominal_speed" as previously done.

Thanks @leptun
 2019-11-28 17:16:37 +01:00
Yuri D'Elia
4f0af648fb Save/restore feedmultiply independently of the feedrate 2019-11-28 17:16:36 +01:00
Yuri D'Elia
6ecff003b7 Fix M600 insertion by the filament sensor 
Remove incorrect usage of stop_and_save_print combined with the
fsensor_recovert internal instruction which would result in a
broken sequence of events and/or broken stack.

Re-use the now safe stop/recover functions in the same spot
(fsensor_checkpoint_stream) to effectively cut a hole in the current
gcode stream to insert an M600 instruction, which removes all
recursive behavior without the need of extra state variables.
 2019-11-28 17:13:37 +01:00
Yuri D'Elia
4268c2fdae Fix recovery from relative/chunked moves 
When starting to replay existing USB/SD commands from a recovery state,
an immediate relative move needs to compensate for a previously
interrupted move. This is almost the norm for the E axis.

Instead of saving the relative status of the move (which needs to
account for the world2machine conversion and is not always available on
a chunked move split by MBL) save directly the calculated target
position for the move in the original plan, which is easy to replay.
 2019-11-28 16:42:35 +01:00
Yuri D'Elia
faa9e925fe Replace a few loops with set_current_to_destination() 2019-11-28 15:57:21 +01:00
Yuri D'Elia
5fa7c178b5 Do not set current_position in mesh_plan_buffer_line 
This is a task which _has_ to be performed by the caller,
such as prepare_move().
 2019-11-28 15:57:21 +01:00
Yuri D'Elia
0f6b9b4051 Unroll the stack in restore_print_from_ram_and_continue 
While handling moves in a recursive plan, such a filament check,
ensure restore_print_from_ram_and_continue unwinds the stack by
aborting early from any call that waits on the planner.

This currently only handles G1 moves, but hard-coded behavior that can
trigger recursive behavior (such as filament change) will probably have
to be checked too.
 2019-11-28 15:57:20 +01:00
Yuri D'Elia
404802b5e6 Clear "sdprinting" state only when all SD moves are complete 
Ensure card.printingHasFinished sees all the planned moves before
clearing sdprinting. To do that, we need to ensure all SD commands
exited the command queue.
 2019-11-28 15:57:20 +01:00
3d-gussner
660b646b57 RR Wiki for Dcodes 
open D-1, D80, D81, D106, D2130
 2019-11-27 11:29:55 +01:00
3d-gussner
475551431c How does M862.5 P works??? 2019-11-26 20:21:05 +01:00
3d-gussner
84cb373905 More G codes documented in RR wiki 
M44, M45, M47, M403, M509, M851, M601, M602, M603, M862
 2019-11-26 20:11:55 +01:00
3d-gussner
5eaf6f0133 Merge branch 'MK3' into MK3-Gcode_documentation 
Merge with MK3 branch
 2019-11-26 12:48:21 +01:00
DRracer
35ce2896bb
Merge pull request #2339 from leptun/PFW-943 
PFW-943: IR sensor gen. II - Updated PR
 2019-11-25 06:23:24 +01:00
DRracer
abb220ff69
Merge pull request #2323 from Panayiotis-git/MK3_Fix_M603 
Add oversighted ‘break’ statement at the M603 command's source
 2019-11-25 06:04:41 +01:00
vintagepc
982c4cbf7b
Candidate fix for homing fail hard reset 2019-11-21 18:51:02 -05:00
Alex Voinea
45b89c5728 Fix typo 2019-11-19 13:55:37 +02:00
Alex Voinea
e66574ac5f Updated branch to use TOGGLE 2019-11-19 13:51:10 +02:00
MRprusa3d
6e2793566c
Merge branch 'MK3' into PFW-943 2019-11-18 14:43:46 +01:00
Alex Voinea
b077303156 Fix compile error 2019-11-17 11:10:13 +02:00
Alex Voinea
14104e7bf9 Clear error flag when fanError is disabled 2019-11-17 10:44:11 +02:00
Alex Voinea
2e0034d915 Update Toggles and Translations 2019-11-17 09:53:14 +02:00
Alex Voinea
359c447127 Do not check for fanError if it is not enabled on resume 
Fix typos
 2019-11-16 22:44:34 +02:00
Alex Voinea
07b6173aaa Merge branch 'MK3' into MK3-PFW-1024 2019-11-16 11:28:29 +02:00
DRracer
e2e32b455a
Merge pull request #2247 from mkbel/reset_live_Z+offset 
Show current Z offset in reset dialog before first layer calibration
 2019-11-15 17:52:29 +01:00
DRracer
460f6c3b5e
update message 2019-11-15 17:47:39 +01:00
DRracer
86ea24c364
Merge pull request #2273 from wavexx/do_not_wait_for_disabled_heater 
Do not wait forever if the heater on the extruder is disabled
 2019-11-15 17:19:11 +01:00
DRracer
715794d854
Merge pull request #2092 from leptun/MK3_Translations 
PFW-1062: Mk3 Toggle and Translations
 2019-11-15 16:53:17 +01:00
DRracer
3a41405f52
Merge pull request #2146 from vintagepc/MK3-2093-sheet-display 
PFW-1061: #2093 - Relocate sheet menu, show sheet on info screen
 2019-11-15 16:07:51 +01:00
vintagepc
f6c35c5d5f
Removed separate fix for #2089 
Per PR fix request
 2019-11-15 08:58:58 -05:00
DRracer
8fae50ec79
Merge pull request #2315 from mkbel/finda 
PFW-1047: Show FINDA state as N/A if last received response is older than 1s.
 2019-11-15 12:53:01 +01:00
DRracer
56251c4f99
Merge pull request #1937 from arons/MK3 
added new function belt test under calibration menu
 2019-11-15 09:39:42 +01:00
DRracer
9e780f0b2b
remove ESC sequence 2019-11-15 09:26:56 +01:00
Alex Voinea
e559a6b67f Merge branch 'MK3' into MK3_BED_LEVELING_PWM 2019-11-13 14:32:57 +02:00
leptun
28e812d91f Mesh bed leveling testing 2019-11-13 14:32:33 +02:00
Panayiotis-git
23cf076242 Add oversighted ‘break’ statement at the M603 command's source 2019-11-12 21:32:39 +02:00
Alex Voinea
11428388c6 MBL toggle and cleanup 2019-11-09 20:58:56 +02:00
Alex Voinea
20a59f5f40 Temp cal. 2019-11-08 19:44:48 +02:00
3d-gussner
422e7fde4a Merge branch 'MK3' into MK3-Gcode_documentation 2019-11-08 18:16:56 +01:00
DRracer
c82fa07299
Merge pull request #2195 from leptun/MK3-fix-LFN 
Fix short filenames scrolling in sdprint menu and status screen
 2019-11-08 16:52:53 +01:00
DRracer
21dd8eadd1
Merge pull request #2188 from mkbel/cut_last_try 
Use MMU cutter only as last resort.
 2019-11-08 16:49:28 +01:00
DRracer
ce5efb107a
Merge pull request #2155 from leptun/MK3_SD_scroll_workaround 
SD Scroll workaround
 2019-11-08 16:48:38 +01:00
DRracer
4cf2f05d1d
Merge pull request #2057 from leptun/MK3_fix_M350 
M350 for all axis - MK3
 2019-11-08 16:15:15 +01:00
DRracer
a14d7545a5
Update Marlin_main.cpp 2019-11-08 16:06:42 +01:00
DRracer
b33c79e6c7
Merge pull request #1899 from wavexx/fix_lcd_pause_function 
Fix the LCD pause function
 2019-11-08 14:55:13 +01:00
DRracer
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements 
"Unknown z" improvements
 2019-11-08 14:52:56 +01:00
Alex Voinea
1de353dd09 Merge branch 'MK3' into MK3_Translations 2019-11-07 17:02:45 +02:00
3d-gussner
5bd995b21b Added more info to doxygen G-Codes 2019-11-06 11:14:06 +01:00
3d-gussner
e6eeafd20c More M-Commands ... 2019-11-05 15:47:04 +01:00
3d-gussner
ca234a11ed M-Commands to M240 2019-11-05 12:40:51 +01:00
3d-gussner
8114bd5b1c Merge with MK3 and few spaces 2019-11-05 09:05:05 +01:00
3d-gussner
58404b9c9d Merge branch 'MK3' into MK3-Gcode_documentation 2019-11-05 09:04:52 +01:00
DRracer
e56cb14bb9
Merge pull request #1739 from draeath/MK3-fix-sdcard-sorting 
use modification times for sdcard time sorting. fixes #477
 2019-11-04 17:31:38 +01:00
DRracer
3c26f7855b
Merge pull request #1704 from leptun/MK3_Enable_fan_waiting_cooldown 
Enable print fan while waiting for cooldown
 2019-11-04 16:52:26 +01:00
leptun
459385708e Fix MMU needs user attention Statistics error 2019-11-02 13:15:13 +02:00
leptun
cd5ff783cf General fixes and improvements to code 2019-10-31 19:07:20 +02:00
Marek Bel
76c39ce689 Show FINDA state as N/A if last received response is older than 1s. 2019-10-31 17:45:22 +01:00
3d-gussner
4501f9d760 M commands documentation #2 2019-10-31 15:46:23 +01:00
3d-gussner
c899320590 Fix M81 Turn off Power Supply... 
... as it should be active if PS_ON_PIN is defined and assinged to an actual pin.
 2019-10-31 15:08:07 +01:00
leptun
1e09f8c003 Wake on certain events 
EEPROM DIM and BRIGHT values swapped!!!
 2019-10-30 21:11:19 +02:00
3d-gussner
ce8dbb5013 M commands documentation #1 2019-10-30 18:52:25 +01:00
3d-gussner
b9dca5f895 other doxygen format changes 2019-10-30 15:52:27 +01:00
3d-gussner
d472f0730c Change doxygen format 2019-10-30 15:50:23 +01:00
3d-gussner
986ac95c45 G codes documented ... next M commands 2019-10-30 11:19:51 +01:00
3d-gussner
8f05627747 Update #1 gcodes doxygen documentation 
added some RepRap G-codes Wiki external links.
 2019-10-25 13:04:04 +02:00
Marek Bel
023ce01f9d Version 3.8.1 final. 2019-10-24 16:12:46 +02:00
XPila
b603528bfd
Merge pull request #2291 from DRracer/lang-381-fixes-4 
Lang 381 fixes 4
 2019-10-23 15:04:39 +02:00
Yuri D'Elia
e25befa175 Fix include guard to silence duplicate declaration warnings 2019-10-22 15:49:10 +02:00
Yuri D'Elia
50231b76da Improved handling of unknown Z position 
- Introduce raise_z_above to move Z carefully when the current position
  is potentially unknown, using stallguard
- Use raise_z_above for:
  * filament loading/unloading clearance
  * extruder spacing when preheating (to avoid buildplate marks on PEI)
  * before homing to avoid damaging the build plate and to avoid
    repeated Z moves as well

Since raise_z_above is conditional, it will only raise when needed.

Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
 2019-10-22 15:49:10 +02:00
DRracer
d32fd1d893 Better EN for new messages 2019-10-22 09:11:47 +02:00
leptun
4943e17bda Preserve power during PP by turning off backlight 2019-10-19 18:45:31 +03:00
leptun
d7b12faa95 Add "Brightness" to Tune menu 2019-10-19 18:45:04 +03:00
leptun
0ed4a23ae7 And another compile fix... 2019-10-18 12:42:55 +03:00
leptun
9fc42526e7 Backlight always on during calibration 2019-10-18 12:18:43 +03:00
leptun
91e94aa0e8 Adjustable timeout 2019-10-18 10:32:41 +03:00
leptun
d432c3644d Enable beeping after fan error is fixed 2019-10-18 09:13:19 +03:00
leptun
ea8d9ae49d Merge branch 'MK3' into MK3_Octoprint_fIxes 2019-10-18 08:45:22 +03:00
leptun
ace1d7049a Reenable command processing when issue is fixed if printer not active 2019-10-17 17:49:15 +03:00
leptun
812eafd09c Fix compile for miniRambo 2019-10-17 13:14:32 +03:00
leptun
25e0d23efe Backlight overhaul and UI changes 2019-10-17 13:11:32 +03:00
DRracer
04bfe674df tiny lang fixes, part 1 2019-10-16 16:32:49 +02:00
leptun
3b005ae38f Backlight detection 2019-10-16 14:40:45 +03:00
DRracer
5a4126e00c
Merge pull request #2263 from leptun/MK3-Fix_PSU_DELTA_SILENT 
PSU_DELTA fix force_high_power_mode()
 2019-10-16 13:22:22 +02:00
Yuri D'Elia
7f3ba499a0 Do not wait forever if the heater on the extruder is disabled 2019-10-15 20:54:00 +02:00
leptun
5a662413e6 Fix compile for printer without backlight support 2019-10-13 14:34:04 +03:00
leptun
75f389a71d Auto-Dimming initial 2019-10-13 14:31:43 +03:00
leptun
4703853a3d Small fixes 2019-10-12 13:19:17 +03:00
leptun
350e27810a fix selftest Z crash. Use stallGuard when testing Z 2019-10-11 21:00:51 +03:00
leptun
b2a1dc6786 Compile fix for firmware without LCD_BL_PIN 2019-10-11 19:23:38 +03:00
leptun
68491c9d4d First implementation 2019-10-11 19:06:37 +03:00
leptun
e3ac2e2509 PSU_DELTA fix force_high_power_mode() 2019-10-10 19:01:57 +03:00
leptun
dde61bb444 Automaton changes. Keep heater ON during probing only if pwm is high 2019-10-06 12:44:45 +03:00
leptun
7650e2b60c Handle disable_heater() 2019-10-06 12:43:03 +03:00
leptun
570b5989f4 Disable bed PWM while probing bed. 2019-10-06 10:50:11 +03:00
Marek Bel
219a5e0625 Initialize EEPROM_SILENT in one place both for MK3 and MK25 printers and make it more clear. 2019-10-03 21:25:52 +02:00
Marek Bel
0dde5e3167 Increase version. 2019-10-03 17:37:22 +02:00
Marek Bel
4fc4cf9c11 Increase version and commit number. 2019-10-03 17:30:14 +02:00
Marek Bel
7feb763643 Move check for clear EEPROM just after factory_reset() to ensure nothing is written to EEPROM before check. 
Fix wizard not starting after Factory RESET / All Data on MK25 printer.

This was broken by:

Author:      leptun <voinea.dragos.alexandru@gmail.com>
Date:        3 weeks ago (9/12/2019 6:16:31 AM)
Commit hash: 78708903e8

Also update eeprom value
 2019-10-02 18:38:46 +02:00
Marek Běl
05e23d1468
Merge branch 'MK3' into MM_lay1_cal 2019-10-01 23:08:11 +02:00
DRracer
ff7260dc6e
Merge pull request #2246 from mkbel/reset_live_Z 
Reset live z
 2019-10-01 23:02:40 +02:00
Marek Bel
74a1c9341b Revert "Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset." 
This reverts commit ca9ef3aba1.
 2019-10-01 22:57:59 +02:00
Marek Bel
ca9ef3aba1 Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset. 2019-10-01 22:57:15 +02:00
Marek Běl
210d7f6bf1
Merge pull request #2245 from DRracer/knob-long-press 
Knob long press fixes
 2019-10-01 22:33:26 +02:00
Marek Bel
087d3cb250 Continue to lcd_v2_calibration() after selection is made in lcd_first_layer_calibration_reset(). Do not ask for selection if sheet is not calibrated, it is calibrated to zero offset or no first layer calibration was ever made. 2019-10-01 21:04:00 +02:00
Marek Bel
aabf7655dc Do all text formatting in first layer calibration reset dialog in one line. 2019-10-01 19:20:36 +02:00
leptun
6bd35bfa2f Increase MENU_DEPTH_MAX to 7 to allow sheet calibration with MMU 2019-10-01 19:43:30 +03:00
Marek Bel
7c3f397a62 Print sheet name and Z offset in first layer calibration reset dialog. 2019-10-01 18:22:12 +02:00
leptun
b39f09b68e Merge branch 'MK3' into MM_lay1_cal 2019-10-01 19:20:50 +03:00
DRracer
d044d3b7b5
Merge pull request #2244 from MRprusa3d/PFW-1008 
EEPROM_BABYSTEP_Z using removal
 2019-10-01 18:04:09 +02:00
DRracer
f3c3526aa5 fix the knob long-press causing hang in modal dialogs 2019-10-01 17:13:36 +02:00
MRprusa3d
ed13788e0c EEPROM_BABYSTEP_Z using removal 2019-10-01 16:57:37 +02:00
DRracer
9ae75612b5 Fixes after first feature tests 2019-10-01 15:31:01 +02:00
DRracer
06187f52f3
Merge pull request #2230 from leptun/MK3_Octoprint_fIxes 
Mk3 Fan error fix
 2019-10-01 11:34:55 +02:00
DRracer
72aed3c544 Allow knob-long-press only in listed menus 2019-10-01 10:51:02 +02:00
Marek Bel
543ad6eb41 Ask to reset Z offset before first layer calibration. 2019-09-30 19:58:09 +02:00
leptun
9d57f9c365 Fix fan_error_selftest() mistake 2019-09-30 20:30:09 +03:00
leptun
61c7479579 Code cleanup: Move texts to messages.c/h 2019-09-30 20:16:01 +03:00
leptun
30f325c81d Extract fan_error_selftest to function for readability 2019-09-30 20:01:31 +03:00
DRracer
aa50479da5
Merge pull request #2231 from MRprusa3d/PFW-873c 
default nozzle diameter for farm mode
 2019-09-30 18:36:25 +02:00
Marek Bel
aba9d1c360 Merge branch 'MK3' into MM_lay1_cal 2019-09-30 18:13:57 +02:00
DRracer
d31abd4bce
Merge pull request #2240 from leptun/MK3_fix_SD_workDirDepth 
fix workDirDepth not reset after card init.
 2019-09-30 17:32:46 +02:00
leptun
bf09eb943d fix workDirDepth not reset after card init. 2019-09-29 21:09:11 +03:00
Marek Bel
8c7015df53 Document set current command. 2019-09-27 15:42:31 +02:00
leptun
ff9a6c8177 Prevent fan error while checking fan functionality 2019-09-26 20:52:29 +03:00
leptun
dfd3f34351 Check for minimum fan speed. Should be achievable by both fans in 1s. 2019-09-25 22:35:35 +03:00
leptun
9c22692827 Fix Cancel Print command processing 2019-09-25 22:34:31 +03:00
leptun
4d149f0dfa Do not send useless keepalive messages after print is canceled from lcd 2019-09-25 18:50:29 +03:00
leptun
532d1fc4ae Fix "Resume Print" missing when doing a normal pause 2019-09-25 18:32:35 +03:00
leptun
14b72d2b46 Prevent timeout when printing from SD with USB host connected 2019-09-25 18:12:19 +03:00
leptun
c3b7b5ebb5 Check fans before resuming 2019-09-25 15:58:07 +03:00
MRprusa3d
89de5aac77 default nozzle diameter for farm mode 2019-09-23 17:13:33 +02:00
leptun
3c17f7e145 No need to check the fan in the menu 2019-09-22 14:04:58 +03:00
leptun
2363f19a62 Minor tweaks for usb printing 2019-09-20 21:07:20 +03:00
DRracer
139c37c744 allow only one string translation constraint defintion per line 2019-09-20 13:01:07 +02:00
leptun
fd01942db8 FAN Error fix - Initial 2019-09-19 20:48:59 +03:00
D.R.racer
2afeb65811 return failStatsFmt that fell out in merge 2019-09-19 18:39:25 +02:00
D.R.racer
f50cef8361 Merge remote-tracking branch 'upstream/MK3' into translations-doc 
and resolve ultralcd.cpp conflicts
 2019-09-19 18:10:20 +02:00
Marek Běl
68359687f8
Merge pull request #2202 from DRracer/lang-381-fixes 
dialogs' layouts fixes + FR polished
 2019-09-19 16:33:26 +02:00
D.R.racer
17cca89993 Merge remote-tracking branch 'upstream/MK3' into translations-doc 2019-09-18 15:17:28 +02:00
DRracer
e7273ea505 Fix [French translation] Wrong display during mesh bed calibration #2218 
minor code/doc improvements
 2019-09-18 12:49:44 +02:00
DRracer
c1bf4a6288
Merge pull request #2216 from michalrudolf/MK3-miniopravy 
Mk3 miniopravy
 2019-09-18 11:34:17 +02:00
DRracer
9ff0b7c3a5
Merge pull request #2199 from leptun/MK3_MK2.x_fix_Default_stepper_power 
Mk3 mk2.x fix default stepper power
 2019-09-18 11:05:23 +02:00
Marek Bel
19a8537901 Document. 2019-09-17 20:35:18 +02:00
Marek Bel
027b6238fd Mark code unused when PINDA_THERMISTOR is defined by macro. Saves 1B of RAM and 4B of FLASH memory. 2019-09-17 20:26:03 +02:00
Marek Bel
966d9baf2b Document. 2019-09-17 19:00:03 +02:00
DRracer
14933f6b0e Fix. Sound [assist], Z-probe [5], menu_fmt_float13off format for last 
string parameter from PROGMEM
 2019-09-17 16:50:51 +02:00
michalrudolf
b660cb3908
ultralcd.cpp 2019-09-17 11:46:29 +02:00
D.R.racer
77c4720c8b Merge remote-tracking branch 'upstream/MK3' into translations-doc 2019-09-17 11:32:27 +02:00
michalrudolf
b4e0c2f455
Update ultralcd.cpp 
Menu Support -> XYZ calibration details -> 3. obrazovka "point offset"
X value is no longer moved to the left if there’s no negative sign
 2019-09-17 10:51:43 +02:00
Marek Bel
c66b4bd876 Do not ask for preheat temperature twice if calibrating first layer from wizard without filament. 2019-09-16 21:14:17 +02:00
Marek Bel
e1cfd6dc4f Remove option to heat nozzle only from mFilamentItem() when activated from wizard, as it has no use after filament unload was removed from wizard. 2019-09-16 18:48:52 +02:00
Marek Bel
ff4450489b Document. 2019-09-16 18:38:44 +02:00
Marek Bel
002a7d31a4 Make lcd_wizard() more debug friendly. 2019-09-16 18:31:12 +02:00
Marek Bel
b99038736c Use eeprom_update_byte instead of eeprom_write_byte 2019-09-16 18:22:34 +02:00
MRprusa3d
d491a9801d
Update ultralcd.cpp 2019-09-16 16:04:45 +02:00
MRprusa3d
0e1d559f03
Merge branch 'MK3' into PFW-943 2019-09-16 15:29:28 +02:00
MRprusa3d
011468598e IR sensor gen. II 
disconnected PCB detection
 2019-09-16 00:43:37 +02:00
leptun
695f938348 Fix conversion warnings 2019-09-14 12:24:45 +03:00
leptun
e828798209 Fixes after merge and line buffer 
General fixes to the lcd_edit_off item and improved way to generate the toggles.
The old process is this: Write '>' if required -> print base -> pad everything before the last character with spaces -> write the eol character -> jump back and print the toggle over the blank characters. This resulted in noticeable flickering when the toggle was redrawn and was showing the same thing. Now the process is similar, except that everything happens in a "line buffer" (a char buffer that holds an entire line) and gets printed in one go, avoiding jump instructions for the lcd and prevents flickering since it doesn't write ' ' and the letters afterwards.
This should get even better when the lcd_buffer gets implemented since the line_buffer will get compared to the existing data on the screen and avoid overwriting what is on the lcd with the same thing.
 2019-09-13 21:21:42 +03:00
Marek Bel
015b34de05 Alert user in wizard about more sheets presets. 2019-09-13 17:09:11 +02:00
DRracer
4423106fad dialogs' layouts fixes (support menu dlgs, statistics etc.) 
French translation polished
 2019-09-13 16:55:05 +02:00
Marek Bel
e754780717 Fix condition for returning to wizard. eFilamentAction == FilamentAction::Preheat was never true as eFilamentAction is set to eFilamentAction::None in lcd_return_to_status(). 2019-09-13 00:19:37 +02:00
Marek Bel
f1d190d2d5 Do not ask same filament related question twice if starting first layer calibration from wizard. 2019-09-12 23:41:42 +02:00
Marek Bel
ebf405d589 Preselect "yes" for filament question in first layer calibration wizard. 2019-09-12 23:20:03 +02:00
Marek Bel
d256c18635 Fix first layer calibration wizard. Do not jump to WizState::LoadFil if calibration is supposed to be performed. 2019-09-12 23:17:19 +02:00
Marek Bel
73642632f5 Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM. 2019-09-12 22:37:28 +02:00
Marek Bel
07a0f527d8 Reset lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P() also when it times out. 2019-09-12 20:30:27 +02:00
Marek Bel
6630591f9e Consume lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P(). 
This fixes problem encountered in lcd_v2_calibration(). Selected menu item skips to another if returning to menu after this message is used.
 2019-09-12 20:20:33 +02:00
Marek Bel
d48197656c Fix lcd_v2_calibration menu not redrawn after full screen message or question. 2019-09-12 20:05:16 +02:00
Marek Bel
770e470fd5 Extract common code to function preheat_or_continue(). Saves 138B of FLASH memory. 2019-09-12 18:53:24 +02:00
Marek Bel
d80b8280a0 Remove commented out and unused functions prototypes. 2019-09-12 18:41:17 +02:00
Marek Bel
3a541488b2 Rename extr_unload_() to mmu_unload_filament() and move it to ultralcd.cpp as it is menu. 2019-09-12 18:40:02 +02:00
Marek Bel
0cdfa7a5e8 Remove dead code. 2019-09-12 18:33:02 +02:00
Marek Bel
e83b2ebe1f Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive. 2019-09-12 18:15:15 +02:00
Marek Bel
c26d7e50f7 Remove redundant lcd_update_enable(true) call. 2019-09-12 18:07:46 +02:00
Marek Bel
6674cbf0d7 Select material / temperature before first layer calibration. 2019-09-12 17:54:05 +02:00
leptun
ae839aee31 Merge branch 'MK3' into MK3_Translations 2019-09-12 16:28:36 +03:00
Marek Bel
6661d3aa45 Merge remote-tracking branch 'prusa3d/MK3' into MM_lay1_cal 2019-09-12 14:28:52 +02:00
DRracer
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu 
Unify preheat menu, add ASA material
 2019-09-12 14:25:38 +02:00
leptun
444daceca3 Move define as requested 2019-09-12 13:39:04 +03:00
leptun
78708903e8 Also update eeprom value 2019-09-12 07:16:31 +03:00
Marek Bel
43705aae2e Rename lay1cal_preheat() to lay1cal_wait_preheat(). 2019-09-12 00:19:20 +02:00
Marek Bel
ae3e6530e6 Do not ask for PLA filament in the beginning of first layer calibration. Do not ask if filament is present if it can be detected by IR sensor. 2019-09-12 00:14:24 +02:00
Marek Bel
14dc6b86e0 Change undocumented behaviour of M190 (Wait for bed temperature). Document M190 and M109 (Wait for extruder temperature). 
Do not remember CooldownNoWait property set by M190 and M109. If M190 was invoked without parameters, CooldownNoWait property was set if it was previously set by "M109 S" or "M109 S" or printer was after power up. Otherwise CooldownNoWait was not set. Now CooldownNoWait is never set if M190 is invoked without parameters.

Saves 44 B of FLASH memory.
 2019-09-11 23:37:09 +02:00
Marek Bel
acb0341a1f Do not set temperature in lay1cal_preheat(). 2019-09-11 22:42:40 +02:00
leptun
bf9f668574 Fix short filenames scrolling in sdprint menu and status screen 2019-09-11 22:04:48 +03:00
Marek Bel
608aa6ff3c Increase number of MMU load tries, so the same number of retries are done without cutter as before enabling cutter. 2019-09-10 18:49:23 +02:00
Marek Bel
0fda4e5594 Merge branch 'cut_last_try' into enable_cutter 2019-09-10 18:37:09 +02:00
Marek Bel
bb1fb49894 Use MMU cutter only as last resort. Cut filament only before last load retry. 2019-09-10 18:36:14 +02:00
Marek Běl
5a1005e143
Merge pull request #2186 from DRracer/enable-fan-pin-test-MK3 
Enable fan pin test even for MK3
 2019-09-10 18:21:17 +02:00
DRracer
d94356802c
Merge pull request #2187 from prusa3d/MK3_3.8.0 
Mk3 3.8.0
 2019-09-10 18:19:36 +02:00
DRracer
e1e40213b2 Enable fan pin test even for MK3 (was disabled in 3.7.2 due to lack of 
FLASH)
 2019-09-10 16:49:22 +02:00
DRracer
898e85e69f
Merge pull request #2038 from Eriobis/MK3 
Add a threshold distance to Z calibration
 2019-09-10 16:20:24 +02:00
DRracer
76c062b980
Merge pull request #2169 from mkbel/format 
Use same format for all instances where "ok" is send to serial line.
 2019-09-10 14:14:47 +02:00
DRracer
059c6b6cbf
Merge pull request #2148 from leptun/MK3_MK2.x_fix_Default_stepper_power 
Mk3 mk2.x fix default stepper power
 2019-09-10 14:13:51 +02:00
DRracer
60de313b8a
Merge pull request #1759 from wavexx/enhanced_longpress 
Default to "Live Adjust Z" when longpressing during a print (closes #1604)
 2019-09-10 14:13:00 +02:00
DRracer
f6f8f5b3b6
Merge pull request #2171 from 3d-gussner/patch-3 
Update reserved space bytes as mentioned in
 2019-09-10 14:07:56 +02:00
DRracer
90f85f7128
Merge pull request #2181 from leptun/MK3_fix_lcd_warning 
Mk3 fix lcd warning
 2019-09-10 14:07:28 +02:00
leptun
818befb91b Fix compile warning 
function was defined as static in lcd.cpp and redefined in lcd.h
 2019-09-09 14:05:20 +03:00
leptun
2480bd90fc Revert lcd_putchar to type int and retrun 0 
Discussion: https://github.com/prusa3d/Prusa-Firmware/pull/2008#issuecomment-514500738
 2019-09-09 13:59:20 +03:00
MRprusa3d
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h 2019-09-09 02:20:39 +02:00
MRprusa3d
70de4d58f6
Update 1_75mm_MK3-EINSy10a-E3Dv6full.h 2019-09-09 02:20:14 +02:00
MRprusa3d
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h 2019-09-09 02:19:52 +02:00
MRprusa3d
325e4a3403
Update 1_75mm_MK25S-RAMBo10a-E3Dv6full.h 2019-09-09 02:19:27 +02:00
MRprusa3d
0b50b2295c
Update 1_75mm_MK25-RAMBo13a-E3Dv6full.h 2019-09-09 02:18:54 +02:00
MRprusa3d
e581263bf1
Update 1_75mm_MK25-RAMBo10a-E3Dv6full.h 2019-09-09 02:18:22 +02:00
MRprusa3d
ca6937edaf
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h 2019-09-09 02:17:42 +02:00
MRprusa3d
a9a3d9d084
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h 2019-09-09 02:17:00 +02:00
MRprusa3d
978ace7fd7
Update Marlin_main.cpp 2019-09-09 02:16:06 +02:00