3d-gussner
4b510fef0a
Add PINDA_TEMP_COMP variable to enable SuperPINDA toggle menu/function
2020-12-23 20:59:08 +01:00
3d-gussner
a97587f373
Changed PINDA_MINTEMP having own value
...
Prevent bad readings/issues if someone changes the bed thermistor that is "better" with lower min values and creates a custom firmware.
The firmware will now be in the range of the PINDAv2 thermistor independant from the bed thermistor (which may change and need adjustments)
2020-12-23 20:58:44 +01:00
3d-gussner
62c36f718b
Add SuperPINDA support for MK2.5/S
...
- Changed DETECT_SUPERPINDA to SUPERPINDA_SUPPORT as on miniRAMo the thermistor readings below 30°C
aren't accurate egnough to determine if SUPERPINDA is connected or not
- Add LCD toggle menu Settings -> HW Setup -> SuperPINDA [Yes/No] to overwrite SuperPINDA detection
- If EEPROM_PINDA_TEMP_COMPENSTATION is empty = 0xff then detect SuperPINDA by checking thermistor
- If EEPROM_PINDA_TEMP_COMPENSTAION is 0 then forec enable for temperature compensation menues and functions
- If EEPROM_PINDA_TEMP_COMPENSATION is 1 then force disable for temperature compensation menues and functions
2020-12-23 20:56:50 +01:00
D.R.racer
fe72ba7a9d
Add PC-blend preheat preset
2020-06-03 17:45:55 +02:00
DRracer
4c74866864
Merge pull request #1933 from prusa3d/enable_cutter
...
Enable MMU cutter.
2020-01-09 13:47:44 +01:00
DRracer
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
Marek Bel
0fda4e5594
Merge branch 'cut_last_try' into enable_cutter
2019-09-10 18:37:09 +02:00
DRracer
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
MRprusa3d
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h
2019-09-09 02:19:52 +02:00
Marek Bel
3da43ae8c2
Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile.
2019-08-26 21:14:07 +02:00
Marek Bel
eb68bb9b43
Add ASA preheat.
2019-08-15 17:46:29 +02:00
Marek Bel
469ca6e184
Merge commit 'refs/tags/v3.8.0-RC1^{}' into enable_cutter
2019-08-15 14:48:28 +02:00
Simon Benoit
49d2866b48
Add threshold distance to Z calibration
...
Add missing if statement
2019-07-30 19:43:07 -04:00
MRprusa3d
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
Marek Bel
181c42fa62
Merge remote-tracking branch 'prusa3d/MK3' into enable_cutter
2019-06-18 20:03:41 +02:00
MRprusa3d
b7d3766ae2
Merge branch 'MK3' into PFW-790
2019-06-12 17:32:13 +02:00
Marek Bel
00da4640e2
Document.
2019-05-30 23:29:33 +02:00
Marek Bel
a9d6ae296b
Enable watchdog for all variants.
2019-05-10 16:30:08 +02:00
Marek Bel
469aa10097
Enable MMU cutter.
2019-03-29 07:27:29 +01:00
MRprusa3d
7d98177716
farmMode updates
2019-03-19 19:48:40 +01:00
PavelSindler
c05561d6b1
Merge pull request #1607 from PavelSindler/7x7
...
7x7 mbl and switching mmu modes
2019-03-15 19:55:15 +01:00
PavelSindler
0ca52216f3
Revert "variants update"
...
This reverts commit c3a95ab79b
2019-03-15 13:14:32 +01:00
Marek Bel
ffe45bdef3
Disable mmu filament cutter feature.
2019-03-15 03:38:37 +01:00
PavelSindler
9e0e4198c5
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
2019-03-14 01:52:44 +01:00
PavelSindler
c3a95ab79b
variants update
2019-03-12 11:57:35 +01:00
PavelSindler
7f92d73a40
MMU_STEALTH_MODE -> MMU_FORCE_STEALTH_MODE; activate_stealth_mode() function update
2019-03-04 17:04:22 +01:00
PavelSindler
26cab2911f
mmu stealth mode
2019-02-22 16:30:54 +01:00
PavelSindler
a220c97f94
Revert "variant files"
...
This reverts commit 850d3316b6
2019-02-06 16:19:30 +01:00
PavelSindler
850d3316b6
variant files
2019-02-06 15:18:12 +01:00
PavelSindler
5324181bf7
maximum bed level correction value enlarged from 50um to 100um and is now used in menus and mesh bed leveling itself
2019-02-03 20:56:14 +01:00
PavelSindler
60acdd23c5
variants
2019-01-28 21:12:38 +01:00
