espr14
1610c96fc4
Fix and report circle divergence
2020-12-21 18:05:52 +01:00
espr14
744763f0a9
Fix diagonal movement
2020-12-21 17:34:54 +01:00
espr14
de23a845b4
Remove unused
2020-12-21 15:53:51 +01:00
espr14
3c9168f8f6
Optimize diagonal
2020-12-21 15:52:25 +01:00
espr14
9a59369c77
Diagonal acceleration
2020-12-21 15:32:09 +01:00
espr14
27ff6b0057
Fix build
2020-12-21 13:11:48 +01:00
espr14
9b55ff9de1
Acceleration up and down
2020-12-21 13:05:26 +01:00
espr14
f39a0999e1
Prepare full acceleration control
2020-12-18 21:33:43 +01:00
espr14
ccf26e4e7a
Basic acceleration
2020-12-18 20:04:00 +01:00
DRracer
9141aee916
Merge pull request #2923 from espr14/PFW-1162-4
...
Calibration: New XY calibration algorithm PFW-1162
2020-12-17 18:23:35 +01:00
espr14
a8f4207df9
New XYZ calibration algorithm
2020-12-17 18:19:36 +01:00
DRracer
d167b3bd78
Merge pull request #2870 from leptun/MK3_random_patches
...
cmdqueue: Patches to Serial communication, pausing and file completion check
2020-11-30 09:01:38 +01:00
Alex Voinea
2ac106d9fe
Merge branch 'MK3' into MK3_random_patches
2020-11-30 09:14:58 +02:00
odaki
61c48df0bd
Merge remote-tracking branch 'upstream/MK3' into flashair_display_ip
2020-11-23 15:53:03 +09:00
DRracer
93c3ea75ee
Merge pull request #2893 from leptun/MK3_fix_XYZ_cal_warning
...
Fix warning and a bit of indentation @XYZ calibration
2020-11-16 10:10:52 +01:00
Voinea Dragos
f96f75bd17
Fix warning and a bit of indentation
...
Saved 64B of flash and 1B of SRAM
2020-11-16 10:58:26 +02:00
Voinea Dragos
f3953d7c83
Merge branch 'MK3' into MK3_random_patches
2020-11-16 09:11:12 +02:00
odaki
c0070506fb
Merge branch 'MK3' into flashair_display_ip
2020-11-13 22:28:22 +09:00
DRracer
d013abfd52
Merge pull request #2890 from prusa3d/MK3_3.9.2
...
Merge MK3_3.9.2 into MK3
2020-11-13 13:03:35 +01:00
DRracer
04bb4b5dad
Merge pull request #2573 from leptun/MK3_filecheck_progress_bar
...
✨ Progress bar for check_file()
2020-11-13 11:56:04 +01:00
Alex Voinea
807eddafb0
Remove debugging code
2020-11-13 12:12:18 +02:00
Alex Voinea
43ace00a24
Fill the progress bar at the end and code optimizations
2020-11-12 18:43:48 +02:00
Alex Voinea
5ad125cbed
Merge branch 'MK3' into MK3_filecheck_progress_bar
2020-11-12 15:53:33 +02:00
D.R.racer
396ee0fde2
Version changed (3.9.2 build 3524)
2020-11-10 10:27:18 +01:00
DRracer
e86be5a30a
Merge pull request #2888 from DRracer/391-sp
...
Calibration point center search repeat
2020-11-10 09:09:14 +01:00
Voinea Dragos
176e2674b9
Fix M105 ok hack
2020-11-09 21:49:56 +02:00
Voinea Dragos
023ccb0e89
Fix double ok in M603
2020-11-09 21:49:56 +02:00
Alex Voinea
0c305ee5f5
Fix warning
2020-11-09 21:49:56 +02:00
Alex Voinea
4abf1f436a
Gracefully dump the queue + fixes to fancheck
2020-11-09 21:49:56 +02:00
Alex Voinea
fdbbc7d62a
Terminate last line from the SD card even if it doesn't have a \n
2020-11-09 21:49:56 +02:00
Alex Voinea
ff56ece6f8
Remove redundant get_command prototype
2020-11-09 21:49:56 +02:00
Alex Voinea
5f0e4a1cac
Temporary M602 patch. Needs more work
2020-11-09 21:49:56 +02:00
Alex Voinea
6873a9d28e
Only send capabilities when M115 is run without arguments
2020-11-09 21:49:56 +02:00
Alex Voinea
0ee8e1f424
Fix missing ok in M601
2020-11-09 21:49:56 +02:00
Alex Voinea
e5ebf7c67f
Fix missing keep-alive messages
2020-11-09 21:49:56 +02:00
Alex Voinea
26f62f042e
Use the longest filename instead of just using the long filename in M27
2020-11-09 21:49:56 +02:00
D.R.racer
4747c8c9f5
Increase top Z-offset limit based on some test results
2020-11-09 12:29:19 +01:00
D.R.racer
5184910ef9
Try harder finding the calibration center
...
with alternative PINDAs it looks like their properties vary a lot
and searching for the calibration center requires trying different
Z levels.
2020-11-09 06:33:41 +01:00
DRracer
ed0494af18
Merge pull request #2885 from DRracer/391-sp
...
XYZ calibration tune
2020-11-06 09:35:33 +01:00
D.R.racer
cd4e16ef9f
XYZ calibration tune
...
PFW-1159
2020-11-06 08:25:56 +01:00
3d-gussner
7651fbb0d1
Fix output "Configuration_prusa.h" delay if compiling failed.
2020-11-02 17:11:24 +01:00
3d-gussner
a5ba666af0
Changed from arguments to flags/options
...
Check for "gawk" on Linux
Add argument to change build number automatically to current commit or define own number
Update exit numbers 1-13 for prepare build env 21-29 for prepare compiling 30-36 compiling
2020-11-02 14:54:16 +01:00
3d-gussner
16165ffcad
Merge branch 'MK3' into MK3_PF-build_Fix_EN_ONLY
2020-11-02 10:52:47 +01:00
Yuri D'Elia
e28159122f
Make MIN_Z_FOR_LOAD/UNLOAD the same
...
When unloading + preheat immediately followed by a load, the carriage is
raised first up to 20mm, then again to 50mm.
With PR #2318 it makes sense to make more space for the extra extrusion
anyway, so make them the same. This moves the carriage only once _while_
preheating, which is nice.
2020-10-29 15:30:16 +01:00
Yuri D'Elia
5f23474c95
Raise Z while preheating when auto/[un]loading the filament
...
Preheating already raised Z to avoid scorching the PEI sheet, as does
filament loading/unloading to allow for excess material to be removed.
However, when loading/autoloading/unloading via the LCD with a cold
nozzle the preheating menu is performed before the carriage is raised,
leaving the carriage close to the sheet while heating the nozzle.
Pre-raise the carriage already while waiting, so that the subsequent
move is automagically skipped.
Set bFilamentWaitingFlag only once to perform both the LCD
initialization and raising to the appropriate height.
Should fix #2761
2020-10-28 20:49:28 +01:00
DRracer
2103d2f588
Merge pull request #2852 from MartinPoupa/LCD_status_changed
...
Lcd status changed
2020-10-21 17:07:39 +02:00
DRracer
c05d4c9112
Update messages.h
...
cleanup space
2020-10-21 17:04:20 +02:00
MartinPoupa
a84d7ef8d6
corectino of declaration
2020-10-13 16:56:57 +02:00
MartinPoupa
c8c7563e8a
LCD status changed
...
When the lcd status changed it will be printed "LCD status changed" to serial line.
2020-10-07 17:44:17 +02:00
3d-gussner
e3b3e66665
Clean PF-Firmware build when changing git branch
2020-10-05 15:25:54 +02:00
