3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6,177 Commits 3 Branches 78 Tags 40 MiB
4a3644052d
Commit Graph

262 Commits

Author SHA1 Message Date
3d-gussner
fd678bc8ec Version changed (3.12.0 build 5672) 
5670 +1 for the commit +1 for the merge
 2023-01-10 09:55:46 +01:00
Yuri D'Elia
612e9d9303 Replace calibration state with a new calibration bitmap 
- Move calibration status/declarations to util.h
- Allows to query the status of each step independently without assuming
  any order
- Allows to extend the calibration with new steps transparently
 2023-01-02 10:51:47 +01:00
3d-gussner
49506b5348 Fix M862.4 with [strict] mode 
Max 8 falvor versions

Fix cherry-pick issues
 2022-12-06 13:31:44 +01:00
3d-gussner
ac55c103a4 Update internal translations 
Fix typo
 2022-11-24 11:03:04 +01:00
3d-gussner
7fe1a50899 Inital Temp Model cal wizard 2022-11-20 11:02:38 +01:00
3d-gussner
a8de9d5696 Bump up build number to 5576 
+2 for https://github.com/prusa3d/Prusa-Firmware/pull/3745
+1 commit
+1 merge
 2022-11-14 14:17:11 +01:00
3d-gussner
de562800ca Fix Long-press cherry-pick from https://github.com/prusa3d/Prusa-Firmware/pull/3737 
Fix eeprom documentation
Update pot and po files as pre-release task
Bump up to FW 3.12.0-RC1 and build number +2 (+1 commit + 1 merge)
 2022-11-07 10:37:43 +01:00
3d-gussner
350b2a6993 Version changed (3.12.0-BETA1 build 5536) 2022-09-29 19:57:46 +02:00
Yuri D'Elia
178b3e1db4 Update current FW version 2022-09-19 18:11:19 +02:00
3d-gussner
66b97683bb Update build.sh and travis to build EN_ONLY 
Change FARM_MODE
- Active only on EINSYs in EN_ONLY
- Active on miniRAMBo in all languages
 2022-08-30 13:57:43 +02:00
Alex Voinea
d1c545fdd6 Disable farm mode in config file 2022-08-30 13:57:43 +02:00
Alex Voinea
7d597eb8b0 Move farm mode to separate file 2022-08-30 13:57:43 +02:00
Guðni Már Gilbert
f7ae3039f8 Don't include M851 in build if Auto Bed Leveling is not enabled 
The variable cs.zprobe_zoffset is not used unless
auto bed leveling is enabled
 2022-08-26 15:35:28 +00:00
3d-gussner
15bac09594 Fix typo 2022-07-12 11:24:35 +02:00
Yuri D'Elia
e37435b53f Merge remote-tracking branch 'upstream/MK3_3.11.1' into mk311_sync 2022-07-04 16:14:23 +02:00
3d-gussner
880853650d
Version changed (3.11.1-RC1 build 4987) 2022-06-13 12:03:48 +02:00
D.R.racer
6b6e06695f Version changed (3.11.0 build 4955) 2022-04-07 09:38:13 +02:00
D.R.racer
c5999888e6 Version changed (3.11.0-RC1 build 4864) 2022-02-17 10:16:52 +01:00
3d-gussner
8e73bb030e Change to python3 
Bump up version
 2022-02-11 15:04:35 +01:00
Guðni Már Gilbert
63c6373f8d Remove TEMP_STAT_LEDS from firmware 
This isn't used by MK3 printers.
It seems to be leftover code from Marlin
 2021-12-25 09:41:50 +00:00
D.R.racer
caca7bb9b8 Version changed (3.10.1 build 4697) 2021-12-16 12:14:02 +01:00
DRracer
fd6dbba06f
Merge branch 'MK3_3.10.1' into PFW-1271_PF-buildv20 2021-08-02 08:51:51 +02:00
D.R.racer
4580b8a78c Version changed (3.10.1 build 4587) 2021-07-16 07:37:11 +02:00
3d-gussner
36f2b5375f Merge remote-tracking branch 'upstream/MK3' into PFW-1271_PF-buildv20 
merge latest changes and fix isses
 2021-06-24 05:53:43 +02:00
D.R.racer
88074ac6c8 Remove FW version parsing 
as it can be done at compile time. Code size dropped by >800 bytes.
 2021-06-22 08:49:52 +02:00
3d-gussner
56889bae13 Update PF-build.sh to work after @DRracer Remove FW version parsing PR 2021-06-17 19:08:55 +02:00
D.R.racer
04de9c0c8a Version changed (3.10.0 build 4481) 2021-05-06 13:46:05 +02:00
Yuri D'Elia
8d04316497 Revert/cleanup mininum extruder height during M600 
This change restores the minimum extruder height for filament purge
during M600 from the current 50mm back to 27mm from FW 3.9.

We do this by introducing a new option for unload_filament() to indicate
that the unload is part of an automatic swap, and in such cases avoid
raising more than absolutely necessary (this will _also_ come in handy
to avoid the extra purge in PR #2318 during M600).

A new define MIN_Z_FOR_SWAP is introduced for this purpose.
MIN_Z_FOR_UNLOAD is still used for manual lcd unload and for M702 and
hasn't been changed.
 2021-04-21 19:07:58 +02:00
D.R.racer
c43688a549 Version changed (3.10.0-RC2 build 4104) 2021-04-16 13:52:36 +02:00
D.R.racer
f31189e5be Version changed (3.10.0-RC1 build 4078) 2021-03-17 12:30:54 +01:00
DRracer
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating 
Raise Z while preheating when auto/[un]loading the filament
 2021-01-11 07:45:54 +01:00
D.R.racer
603d704178 Version changed (3.9.3 build 3556) 2021-01-07 12:50:58 +01:00
D.R.racer
7e02a7f118 Version changed (3.9.3-RC1 build 3555) 2020-12-26 15:45:34 +01:00
D.R.racer
396ee0fde2
Version changed (3.9.2 build 3524) 2020-11-10 10:27:18 +01:00
Yuri D'Elia
e28159122f Make MIN_Z_FOR_LOAD/UNLOAD the same 
When unloading + preheat immediately followed by a load, the carriage is
raised first up to 20mm, then again to 50mm.

With PR #2318 it makes sense to make more space for the extra extrusion
anyway, so make them the same. This moves the carriage only once _while_
preheating, which is nice.
 2020-10-29 15:30:16 +01:00
D.R.racer
7278458316 Version changed (3.9.1 build 3518) 2020-09-18 16:59:22 +02:00
D.R.racer
02891f6bb8 Version changed (3.9.1-RC1 build 3512) 2020-09-02 11:56:53 +02:00
D.R.racer
2447dbc69f Version changed (3.9.0 build 3421) - sync 2020-05-18 16:56:32 +02:00
D.R.racer
285088a715 Version changed (3.9.0 build 3421) 2020-05-18 16:45:18 +02:00
DRracer
7be713199d Version changed (3.9.0-RC3 build 3401) 2020-04-28 12:06:13 +02:00
DRracer
40c052f482 Version changed (3.9.0-RC2 build 3398) 2020-04-24 20:02:13 +02:00
DRracer
2e18a48b87 Version changed (3.9.0-RC1 build 3272) 2020-02-17 16:47:56 +01:00
Yuri D'Elia
4b85664b27 Raise default extruder jerk to 4.5 
This should be the new default for LA1.5 for direct drive printers and
newer PrusaSlicer profiles too (hopefully).
 2020-02-03 15:42:27 +01:00
DRracer
95a2ad533d Version changed (3.9.0 build 3175) 2020-01-16 16:03:34 +01:00
DRracer
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements 
"Unknown z" improvements
 2019-11-08 14:52:56 +01:00
Marek Bel
023ce01f9d Version 3.8.1 final. 2019-10-24 16:12:46 +02:00
Yuri D'Elia
50231b76da Improved handling of unknown Z position 
- Introduce raise_z_above to move Z carefully when the current position
  is potentially unknown, using stallguard
- Use raise_z_above for:
  * filament loading/unloading clearance
  * extruder spacing when preheating (to avoid buildplate marks on PEI)
  * before homing to avoid damaging the build plate and to avoid
    repeated Z moves as well

Since raise_z_above is conditional, it will only raise when needed.

Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
 2019-10-22 15:49:10 +02:00
Marek Bel
0dde5e3167 Increase version. 2019-10-03 17:37:22 +02:00
Marek Bel
4fc4cf9c11 Increase version and commit number. 2019-10-03 17:30:14 +02:00
DRracer
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu 
Unify preheat menu, add ASA material
 2019-09-12 14:25:38 +02:00