3d-gussner
7da1db2f25
Merge remote-tracking branch 'upstream/MK3' into MK3-Gcode_documentation
2019-12-04 13:35:09 +01:00
3d-gussner
fb3c65b3dc
fixed links to RR Wiki
2019-12-04 12:38:43 +01:00
3d-gussner
cdc6beaf6f
Added M910 -> M918
2019-12-04 12:25:33 +01:00
3d-gussner
a5f3027ee1
D2130 updated
...
Needs review
2019-12-04 11:38:29 +01:00
Yuri D'Elia
8448b8d413
Keep destination updated in an aborted plan as well
...
When aborting the plan destination is updated anyway to reflect the latest
position. There's no use in this additional check.
2019-12-03 20:37:13 +01:00
Yuri D'Elia
063d0421ac
Call long_pause from the main loop (again)
...
After calling stop_and_save_print_to_ram, perform the parking moves
within the main loop as done before PR#1899 to avoid planning within
an interrupted move (which would clear the abort flag too soon).
2019-12-03 20:37:13 +01:00
Yuri D'Elia
d60230e494
Add some documentation
2019-12-03 20:37:13 +01:00
Yuri D'Elia
792d7ca6dc
Turn off heaters just prior to retraction to limit oozing
2019-12-03 20:37:13 +01:00
Yuri D'Elia
4fce74140a
Also abort planning in stop_and_save_print_to_ram
...
Similarly to resume_print_from_ram_and_continue, abort any
planning in mesh_plan_buffer_line already in stop_and_save_print_to_ram
in case it is called for pausing only.
2019-12-03 20:37:09 +01:00
3d-gussner
0ce7c51c1d
Added more D-codes to RR Wiki and doxygen
...
D-1, D80, D81, D106
2019-12-03 20:02:58 +01:00
Yuri D'Elia
454e99dbb5
Use lcd_print_stop() in M603, fix octoprint regression
...
M603 shouldn't report a fatal error state.
Use lcd_print_stop().
Regression introduced in PR #2274
2019-12-03 16:51:59 +01:00
Alex Voinea
56193ea252
Merge branch 'MK3' into MK3_TONE
2019-11-29 23:16:46 +02:00
Alex Voinea
e7f2577233
Fix kill messages
2019-11-29 22:49:22 +02:00
DRracer
15bfb7013d
Merge pull request #2274 from wavexx/fix_mesh_plan_buffer_line
...
PFW-1028: Fix recovery from filament sensor checks / crash detect / power panic
2019-11-29 15:18:15 +01:00
Alex Voinea
779423f0e7
Move hardcoded values to variants
2019-11-29 15:06:54 +02:00
Alex Voinea
a413cfbb9a
Merge branch 'MK3' into MK3-PFW-1024
2019-11-29 13:07:45 +02:00
Yuri D'Elia
dbe2ed4150
Fix pause/resume when using M25/M601
...
Remove the conflicting and mostly useless card.paused flag (the printing
is either paused, or not) and switch to isPrintPaused only which
accounts for both cases (SD/USB) correctly.
Fix M27/getStatus to show the current real status of the SD print.
Synchronize the queue on M601, as required to precisely pause the print
at the correct instruction.
Alias M25 to M601, which when combined with PR #1899 fixes issue #1614 .
Guard against incorrect usage in M601, M602 and M603.
2019-11-28 17:37:58 +01:00
Yuri D'Elia
18eaf21baf
Halve memory usage of saved feedrate
...
Truncate the saved feedrate to an uint16_t.
This is more than sufficient for recovery.
2019-11-28 17:16:37 +01:00
Yuri D'Elia
17176c1df2
Save/restore the default feedrate correctly
...
Since the global feedrate can be similarly modified for moves ahead of
time, save the original feedrate in the planner as we do for
gcode_target.
This avoids having to undo feedmultiply (and machine limits!) from
"nominal_speed" as previously done.
Thanks @leptun
2019-11-28 17:16:37 +01:00
Yuri D'Elia
4f0af648fb
Save/restore feedmultiply independently of the feedrate
2019-11-28 17:16:36 +01:00
Yuri D'Elia
6ecff003b7
Fix M600 insertion by the filament sensor
...
Remove incorrect usage of stop_and_save_print combined with the
fsensor_recovert internal instruction which would result in a
broken sequence of events and/or broken stack.
Re-use the now safe stop/recover functions in the same spot
(fsensor_checkpoint_stream) to effectively cut a hole in the current
gcode stream to insert an M600 instruction, which removes all
recursive behavior without the need of extra state variables.
2019-11-28 17:13:37 +01:00
Yuri D'Elia
4268c2fdae
Fix recovery from relative/chunked moves
...
When starting to replay existing USB/SD commands from a recovery state,
an immediate relative move needs to compensate for a previously
interrupted move. This is almost the norm for the E axis.
Instead of saving the relative status of the move (which needs to
account for the world2machine conversion and is not always available on
a chunked move split by MBL) save directly the calculated target
position for the move in the original plan, which is easy to replay.
2019-11-28 16:42:35 +01:00
Yuri D'Elia
faa9e925fe
Replace a few loops with set_current_to_destination()
2019-11-28 15:57:21 +01:00
Yuri D'Elia
5fa7c178b5
Do not set current_position in mesh_plan_buffer_line
...
This is a task which _has_ to be performed by the caller,
such as prepare_move().
2019-11-28 15:57:21 +01:00
Yuri D'Elia
0f6b9b4051
Unroll the stack in restore_print_from_ram_and_continue
...
While handling moves in a recursive plan, such a filament check,
ensure restore_print_from_ram_and_continue unwinds the stack by
aborting early from any call that waits on the planner.
This currently only handles G1 moves, but hard-coded behavior that can
trigger recursive behavior (such as filament change) will probably have
to be checked too.
2019-11-28 15:57:20 +01:00
Yuri D'Elia
404802b5e6
Clear "sdprinting" state only when all SD moves are complete
...
Ensure card.printingHasFinished sees all the planned moves before
clearing sdprinting. To do that, we need to ensure all SD commands
exited the command queue.
2019-11-28 15:57:20 +01:00
3d-gussner
660b646b57
RR Wiki for Dcodes
...
open D-1, D80, D81, D106, D2130
2019-11-27 11:29:55 +01:00
3d-gussner
475551431c
How does M862.5 P works???
2019-11-26 20:21:05 +01:00
3d-gussner
84cb373905
More G codes documented in RR wiki
...
M44, M45, M47, M403, M509, M851, M601, M602, M603, M862
2019-11-26 20:11:55 +01:00
3d-gussner
5eaf6f0133
Merge branch 'MK3' into MK3-Gcode_documentation
...
Merge with MK3 branch
2019-11-26 12:48:21 +01:00
DRracer
35ce2896bb
Merge pull request #2339 from leptun/PFW-943
...
PFW-943: IR sensor gen. II - Updated PR
2019-11-25 06:23:24 +01:00
DRracer
abb220ff69
Merge pull request #2323 from Panayiotis-git/MK3_Fix_M603
...
Add oversighted ‘break’ statement at the M603 command's source
2019-11-25 06:04:41 +01:00
vintagepc
982c4cbf7b
Candidate fix for homing fail hard reset
2019-11-21 18:51:02 -05:00
Alex Voinea
45b89c5728
Fix typo
2019-11-19 13:55:37 +02:00
Alex Voinea
e66574ac5f
Updated branch to use TOGGLE
2019-11-19 13:51:10 +02:00
MRprusa3d
6e2793566c
Merge branch 'MK3' into PFW-943
2019-11-18 14:43:46 +01:00
Alex Voinea
b077303156
Fix compile error
2019-11-17 11:10:13 +02:00
Alex Voinea
14104e7bf9
Clear error flag when fanError is disabled
2019-11-17 10:44:11 +02:00
Alex Voinea
2e0034d915
Update Toggles and Translations
2019-11-17 09:53:14 +02:00
Alex Voinea
359c447127
Do not check for fanError if it is not enabled on resume
...
Fix typos
2019-11-16 22:44:34 +02:00
Alex Voinea
07b6173aaa
Merge branch 'MK3' into MK3-PFW-1024
2019-11-16 11:28:29 +02:00
DRracer
e2e32b455a
Merge pull request #2247 from mkbel/reset_live_Z+offset
...
Show current Z offset in reset dialog before first layer calibration
2019-11-15 17:52:29 +01:00
DRracer
460f6c3b5e
update message
2019-11-15 17:47:39 +01:00
DRracer
86ea24c364
Merge pull request #2273 from wavexx/do_not_wait_for_disabled_heater
...
Do not wait forever if the heater on the extruder is disabled
2019-11-15 17:19:11 +01:00
DRracer
715794d854
Merge pull request #2092 from leptun/MK3_Translations
...
PFW-1062: Mk3 Toggle and Translations
2019-11-15 16:53:17 +01:00
DRracer
3a41405f52
Merge pull request #2146 from vintagepc/MK3-2093-sheet-display
...
PFW-1061: #2093 - Relocate sheet menu, show sheet on info screen
2019-11-15 16:07:51 +01:00
vintagepc
f6c35c5d5f
Removed separate fix for #2089
...
Per PR fix request
2019-11-15 08:58:58 -05:00
DRracer
8fae50ec79
Merge pull request #2315 from mkbel/finda
...
PFW-1047: Show FINDA state as N/A if last received response is older than 1s.
2019-11-15 12:53:01 +01:00
DRracer
56251c4f99
Merge pull request #1937 from arons/MK3
...
added new function belt test under calibration menu
2019-11-15 09:39:42 +01:00
DRracer
9e780f0b2b
remove ESC sequence
2019-11-15 09:26:56 +01:00
Alex Voinea
e559a6b67f
Merge branch 'MK3' into MK3_BED_LEVELING_PWM
2019-11-13 14:32:57 +02:00
leptun
28e812d91f
Mesh bed leveling testing
2019-11-13 14:32:33 +02:00
Panayiotis-git
23cf076242
Add oversighted ‘break’ statement at the M603 command's source
2019-11-12 21:32:39 +02:00
Alex Voinea
11428388c6
MBL toggle and cleanup
2019-11-09 20:58:56 +02:00
Alex Voinea
20a59f5f40
Temp cal.
2019-11-08 19:44:48 +02:00
3d-gussner
422e7fde4a
Merge branch 'MK3' into MK3-Gcode_documentation
2019-11-08 18:16:56 +01:00
DRracer
c82fa07299
Merge pull request #2195 from leptun/MK3-fix-LFN
...
Fix short filenames scrolling in sdprint menu and status screen
2019-11-08 16:52:53 +01:00
DRracer
21dd8eadd1
Merge pull request #2188 from mkbel/cut_last_try
...
Use MMU cutter only as last resort.
2019-11-08 16:49:28 +01:00
DRracer
ce5efb107a
Merge pull request #2155 from leptun/MK3_SD_scroll_workaround
...
SD Scroll workaround
2019-11-08 16:48:38 +01:00
DRracer
4cf2f05d1d
Merge pull request #2057 from leptun/MK3_fix_M350
...
M350 for all axis - MK3
2019-11-08 16:15:15 +01:00
DRracer
a14d7545a5
Update Marlin_main.cpp
2019-11-08 16:06:42 +01:00
DRracer
b33c79e6c7
Merge pull request #1899 from wavexx/fix_lcd_pause_function
...
Fix the LCD pause function
2019-11-08 14:55:13 +01:00
DRracer
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements
...
"Unknown z" improvements
2019-11-08 14:52:56 +01:00
Alex Voinea
1de353dd09
Merge branch 'MK3' into MK3_Translations
2019-11-07 17:02:45 +02:00
3d-gussner
5bd995b21b
Added more info to doxygen G-Codes
2019-11-06 11:14:06 +01:00
3d-gussner
e6eeafd20c
More M-Commands ...
2019-11-05 15:47:04 +01:00
3d-gussner
ca234a11ed
M-Commands to M240
2019-11-05 12:40:51 +01:00
3d-gussner
8114bd5b1c
Merge with MK3 and few spaces
2019-11-05 09:05:05 +01:00
3d-gussner
58404b9c9d
Merge branch 'MK3' into MK3-Gcode_documentation
2019-11-05 09:04:52 +01:00
DRracer
e56cb14bb9
Merge pull request #1739 from draeath/MK3-fix-sdcard-sorting
...
use modification times for sdcard time sorting. fixes #477
2019-11-04 17:31:38 +01:00
DRracer
3c26f7855b
Merge pull request #1704 from leptun/MK3_Enable_fan_waiting_cooldown
...
Enable print fan while waiting for cooldown
2019-11-04 16:52:26 +01:00
leptun
459385708e
Fix MMU needs user attention Statistics error
2019-11-02 13:15:13 +02:00
leptun
cd5ff783cf
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
Marek Bel
76c39ce689
Show FINDA state as N/A if last received response is older than 1s.
2019-10-31 17:45:22 +01:00
3d-gussner
4501f9d760
M commands documentation #2
2019-10-31 15:46:23 +01:00
3d-gussner
c899320590
Fix M81 Turn off Power Supply...
...
... as it should be active if PS_ON_PIN is defined and assinged to an actual pin.
2019-10-31 15:08:07 +01:00
leptun
1e09f8c003
Wake on certain events
...
EEPROM DIM and BRIGHT values swapped!!!
2019-10-30 21:11:19 +02:00
3d-gussner
ce8dbb5013
M commands documentation #1
2019-10-30 18:52:25 +01:00
3d-gussner
b9dca5f895
other doxygen format changes
2019-10-30 15:52:27 +01:00
3d-gussner
d472f0730c
Change doxygen format
2019-10-30 15:50:23 +01:00
3d-gussner
986ac95c45
G codes documented ... next M commands
2019-10-30 11:19:51 +01:00
3d-gussner
8f05627747
Update #1 gcodes doxygen documentation
...
added some RepRap G-codes Wiki external links.
2019-10-25 13:04:04 +02:00
Marek Bel
023ce01f9d
Version 3.8.1 final.
2019-10-24 16:12:46 +02:00
XPila
b603528bfd
Merge pull request #2291 from DRracer/lang-381-fixes-4
...
Lang 381 fixes 4
2019-10-23 15:04:39 +02:00
Yuri D'Elia
e25befa175
Fix include guard to silence duplicate declaration warnings
2019-10-22 15:49:10 +02:00
Yuri D'Elia
50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
DRracer
d32fd1d893
Better EN for new messages
2019-10-22 09:11:47 +02:00
leptun
4943e17bda
Preserve power during PP by turning off backlight
2019-10-19 18:45:31 +03:00
leptun
d7b12faa95
Add "Brightness" to Tune menu
2019-10-19 18:45:04 +03:00
leptun
0ed4a23ae7
And another compile fix...
2019-10-18 12:42:55 +03:00
leptun
9fc42526e7
Backlight always on during calibration
2019-10-18 12:18:43 +03:00
leptun
91e94aa0e8
Adjustable timeout
2019-10-18 10:32:41 +03:00
leptun
d432c3644d
Enable beeping after fan error is fixed
2019-10-18 09:13:19 +03:00
leptun
ea8d9ae49d
Merge branch 'MK3' into MK3_Octoprint_fIxes
2019-10-18 08:45:22 +03:00
leptun
ace1d7049a
Reenable command processing when issue is fixed if printer not active
2019-10-17 17:49:15 +03:00
leptun
812eafd09c
Fix compile for miniRambo
2019-10-17 13:14:32 +03:00
leptun
25e0d23efe
Backlight overhaul and UI changes
2019-10-17 13:11:32 +03:00
DRracer
04bfe674df
tiny lang fixes, part 1
2019-10-16 16:32:49 +02:00
leptun
3b005ae38f
Backlight detection
2019-10-16 14:40:45 +03:00
DRracer
5a4126e00c
Merge pull request #2263 from leptun/MK3-Fix_PSU_DELTA_SILENT
...
PSU_DELTA fix force_high_power_mode()
2019-10-16 13:22:22 +02:00
Yuri D'Elia
7f3ba499a0
Do not wait forever if the heater on the extruder is disabled
2019-10-15 20:54:00 +02:00
leptun
5a662413e6
Fix compile for printer without backlight support
2019-10-13 14:34:04 +03:00
leptun
75f389a71d
Auto-Dimming initial
2019-10-13 14:31:43 +03:00
leptun
b2a1dc6786
Compile fix for firmware without LCD_BL_PIN
2019-10-11 19:23:38 +03:00
leptun
68491c9d4d
First implementation
2019-10-11 19:06:37 +03:00
leptun
e3ac2e2509
PSU_DELTA fix force_high_power_mode()
2019-10-10 19:01:57 +03:00
leptun
dde61bb444
Automaton changes. Keep heater ON during probing only if pwm is high
2019-10-06 12:44:45 +03:00
leptun
7650e2b60c
Handle disable_heater()
2019-10-06 12:43:03 +03:00
leptun
570b5989f4
Disable bed PWM while probing bed.
2019-10-06 10:50:11 +03:00
Marek Bel
219a5e0625
Initialize EEPROM_SILENT in one place both for MK3 and MK25 printers and make it more clear.
2019-10-03 21:25:52 +02:00
Marek Bel
0dde5e3167
Increase version.
2019-10-03 17:37:22 +02:00
Marek Bel
4fc4cf9c11
Increase version and commit number.
2019-10-03 17:30:14 +02:00
Marek Bel
7feb763643
Move check for clear EEPROM just after factory_reset() to ensure nothing is written to EEPROM before check.
...
Fix wizard not starting after Factory RESET / All Data on MK25 printer.
This was broken by:
Author: leptun <voinea.dragos.alexandru@gmail.com>
Date: 3 weeks ago (9/12/2019 6:16:31 AM)
Commit hash: 78708903e8
Also update eeprom value
2019-10-02 18:38:46 +02:00
Marek Běl
05e23d1468
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 23:08:11 +02:00
DRracer
ff7260dc6e
Merge pull request #2246 from mkbel/reset_live_Z
...
Reset live z
2019-10-01 23:02:40 +02:00
Marek Bel
74a1c9341b
Revert "Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset."
...
This reverts commit ca9ef3aba1
.
2019-10-01 22:57:59 +02:00
Marek Bel
ca9ef3aba1
Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset.
2019-10-01 22:57:15 +02:00
Marek Běl
210d7f6bf1
Merge pull request #2245 from DRracer/knob-long-press
...
Knob long press fixes
2019-10-01 22:33:26 +02:00
Marek Bel
087d3cb250
Continue to lcd_v2_calibration() after selection is made in lcd_first_layer_calibration_reset(). Do not ask for selection if sheet is not calibrated, it is calibrated to zero offset or no first layer calibration was ever made.
2019-10-01 21:04:00 +02:00
Marek Bel
aabf7655dc
Do all text formatting in first layer calibration reset dialog in one line.
2019-10-01 19:20:36 +02:00
leptun
6bd35bfa2f
Increase MENU_DEPTH_MAX to 7 to allow sheet calibration with MMU
2019-10-01 19:43:30 +03:00
Marek Bel
7c3f397a62
Print sheet name and Z offset in first layer calibration reset dialog.
2019-10-01 18:22:12 +02:00
leptun
b39f09b68e
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 19:20:50 +03:00
DRracer
d044d3b7b5
Merge pull request #2244 from MRprusa3d/PFW-1008
...
EEPROM_BABYSTEP_Z using removal
2019-10-01 18:04:09 +02:00
DRracer
f3c3526aa5
fix the knob long-press causing hang in modal dialogs
2019-10-01 17:13:36 +02:00
MRprusa3d
ed13788e0c
EEPROM_BABYSTEP_Z using removal
2019-10-01 16:57:37 +02:00
DRracer
9ae75612b5
Fixes after first feature tests
2019-10-01 15:31:01 +02:00
DRracer
06187f52f3
Merge pull request #2230 from leptun/MK3_Octoprint_fIxes
...
Mk3 Fan error fix
2019-10-01 11:34:55 +02:00
DRracer
72aed3c544
Allow knob-long-press only in listed menus
2019-10-01 10:51:02 +02:00
Marek Bel
543ad6eb41
Ask to reset Z offset before first layer calibration.
2019-09-30 19:58:09 +02:00
leptun
9d57f9c365
Fix fan_error_selftest() mistake
2019-09-30 20:30:09 +03:00
leptun
61c7479579
Code cleanup: Move texts to messages.c/h
2019-09-30 20:16:01 +03:00
leptun
30f325c81d
Extract fan_error_selftest to function for readability
2019-09-30 20:01:31 +03:00
DRracer
aa50479da5
Merge pull request #2231 from MRprusa3d/PFW-873c
...
default nozzle diameter for farm mode
2019-09-30 18:36:25 +02:00
Marek Bel
aba9d1c360
Merge branch 'MK3' into MM_lay1_cal
2019-09-30 18:13:57 +02:00
DRracer
d31abd4bce
Merge pull request #2240 from leptun/MK3_fix_SD_workDirDepth
...
fix workDirDepth not reset after card init.
2019-09-30 17:32:46 +02:00
leptun
bf09eb943d
fix workDirDepth not reset after card init.
2019-09-29 21:09:11 +03:00
Marek Bel
8c7015df53
Document set current command.
2019-09-27 15:42:31 +02:00
leptun
ff9a6c8177
Prevent fan error while checking fan functionality
2019-09-26 20:52:29 +03:00
leptun
dfd3f34351
Check for minimum fan speed. Should be achievable by both fans in 1s.
2019-09-25 22:35:35 +03:00
leptun
9c22692827
Fix Cancel Print command processing
2019-09-25 22:34:31 +03:00
leptun
4d149f0dfa
Do not send useless keepalive messages after print is canceled from lcd
2019-09-25 18:50:29 +03:00
leptun
532d1fc4ae
Fix "Resume Print" missing when doing a normal pause
2019-09-25 18:32:35 +03:00
leptun
14b72d2b46
Prevent timeout when printing from SD with USB host connected
2019-09-25 18:12:19 +03:00
leptun
c3b7b5ebb5
Check fans before resuming
2019-09-25 15:58:07 +03:00
MRprusa3d
89de5aac77
default nozzle diameter for farm mode
2019-09-23 17:13:33 +02:00
leptun
3c17f7e145
No need to check the fan in the menu
2019-09-22 14:04:58 +03:00
leptun
2363f19a62
Minor tweaks for usb printing
2019-09-20 21:07:20 +03:00
DRracer
139c37c744
allow only one string translation constraint defintion per line
2019-09-20 13:01:07 +02:00
leptun
fd01942db8
FAN Error fix - Initial
2019-09-19 20:48:59 +03:00
D.R.racer
2afeb65811
return failStatsFmt that fell out in merge
2019-09-19 18:39:25 +02:00
D.R.racer
f50cef8361
Merge remote-tracking branch 'upstream/MK3' into translations-doc
...
and resolve ultralcd.cpp conflicts
2019-09-19 18:10:20 +02:00
Marek Běl
68359687f8
Merge pull request #2202 from DRracer/lang-381-fixes
...
dialogs' layouts fixes + FR polished
2019-09-19 16:33:26 +02:00
D.R.racer
17cca89993
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-18 15:17:28 +02:00
DRracer
e7273ea505
Fix [French translation] Wrong display during mesh bed calibration #2218
...
minor code/doc improvements
2019-09-18 12:49:44 +02:00
DRracer
c1bf4a6288
Merge pull request #2216 from michalrudolf/MK3-miniopravy
...
Mk3 miniopravy
2019-09-18 11:34:17 +02:00
DRracer
9ff0b7c3a5
Merge pull request #2199 from leptun/MK3_MK2.x_fix_Default_stepper_power
...
Mk3 mk2.x fix default stepper power
2019-09-18 11:05:23 +02:00
Marek Bel
19a8537901
Document.
2019-09-17 20:35:18 +02:00
Marek Bel
027b6238fd
Mark code unused when PINDA_THERMISTOR is defined by macro. Saves 1B of RAM and 4B of FLASH memory.
2019-09-17 20:26:03 +02:00
Marek Bel
966d9baf2b
Document.
2019-09-17 19:00:03 +02:00
DRracer
14933f6b0e
Fix. Sound [assist], Z-probe [5], menu_fmt_float13off format for last
...
string parameter from PROGMEM
2019-09-17 16:50:51 +02:00
michalrudolf
b660cb3908
ultralcd.cpp
2019-09-17 11:46:29 +02:00
D.R.racer
77c4720c8b
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-17 11:32:27 +02:00
michalrudolf
b4e0c2f455
Update ultralcd.cpp
...
Menu Support -> XYZ calibration details -> 3. obrazovka "point offset"
X value is no longer moved to the left if there’s no negative sign
2019-09-17 10:51:43 +02:00
Marek Bel
c66b4bd876
Do not ask for preheat temperature twice if calibrating first layer from wizard without filament.
2019-09-16 21:14:17 +02:00
Marek Bel
e1cfd6dc4f
Remove option to heat nozzle only from mFilamentItem() when activated from wizard, as it has no use after filament unload was removed from wizard.
2019-09-16 18:48:52 +02:00
Marek Bel
ff4450489b
Document.
2019-09-16 18:38:44 +02:00
Marek Bel
002a7d31a4
Make lcd_wizard() more debug friendly.
2019-09-16 18:31:12 +02:00
Marek Bel
b99038736c
Use eeprom_update_byte instead of eeprom_write_byte
2019-09-16 18:22:34 +02:00
MRprusa3d
d491a9801d
Update ultralcd.cpp
2019-09-16 16:04:45 +02:00
MRprusa3d
0e1d559f03
Merge branch 'MK3' into PFW-943
2019-09-16 15:29:28 +02:00
MRprusa3d
011468598e
IR sensor gen. II
...
disconnected PCB detection
2019-09-16 00:43:37 +02:00
leptun
695f938348
Fix conversion warnings
2019-09-14 12:24:45 +03:00
leptun
e828798209
Fixes after merge and line buffer
...
General fixes to the lcd_edit_off item and improved way to generate the toggles.
The old process is this: Write '>' if required -> print base -> pad everything before the last character with spaces -> write the eol character -> jump back and print the toggle over the blank characters. This resulted in noticeable flickering when the toggle was redrawn and was showing the same thing. Now the process is similar, except that everything happens in a "line buffer" (a char buffer that holds an entire line) and gets printed in one go, avoiding jump instructions for the lcd and prevents flickering since it doesn't write ' ' and the letters afterwards.
This should get even better when the lcd_buffer gets implemented since the line_buffer will get compared to the existing data on the screen and avoid overwriting what is on the lcd with the same thing.
2019-09-13 21:21:42 +03:00
Marek Bel
015b34de05
Alert user in wizard about more sheets presets.
2019-09-13 17:09:11 +02:00
DRracer
4423106fad
dialogs' layouts fixes (support menu dlgs, statistics etc.)
...
French translation polished
2019-09-13 16:55:05 +02:00
Marek Bel
e754780717
Fix condition for returning to wizard. eFilamentAction == FilamentAction::Preheat was never true as eFilamentAction is set to eFilamentAction::None in lcd_return_to_status().
2019-09-13 00:19:37 +02:00
Marek Bel
f1d190d2d5
Do not ask same filament related question twice if starting first layer calibration from wizard.
2019-09-12 23:41:42 +02:00
Marek Bel
ebf405d589
Preselect "yes" for filament question in first layer calibration wizard.
2019-09-12 23:20:03 +02:00
Marek Bel
d256c18635
Fix first layer calibration wizard. Do not jump to WizState::LoadFil if calibration is supposed to be performed.
2019-09-12 23:17:19 +02:00
Marek Bel
73642632f5
Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM.
2019-09-12 22:37:28 +02:00
Marek Bel
07a0f527d8
Reset lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P() also when it times out.
2019-09-12 20:30:27 +02:00
Marek Bel
6630591f9e
Consume lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P().
...
This fixes problem encountered in lcd_v2_calibration(). Selected menu item skips to another if returning to menu after this message is used.
2019-09-12 20:20:33 +02:00
Marek Bel
d48197656c
Fix lcd_v2_calibration menu not redrawn after full screen message or question.
2019-09-12 20:05:16 +02:00
Marek Bel
770e470fd5
Extract common code to function preheat_or_continue(). Saves 138B of FLASH memory.
2019-09-12 18:53:24 +02:00
Marek Bel
d80b8280a0
Remove commented out and unused functions prototypes.
2019-09-12 18:41:17 +02:00
Marek Bel
3a541488b2
Rename extr_unload_() to mmu_unload_filament() and move it to ultralcd.cpp as it is menu.
2019-09-12 18:40:02 +02:00
Marek Bel
0cdfa7a5e8
Remove dead code.
2019-09-12 18:33:02 +02:00
Marek Bel
e83b2ebe1f
Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive.
2019-09-12 18:15:15 +02:00
Marek Bel
c26d7e50f7
Remove redundant lcd_update_enable(true) call.
2019-09-12 18:07:46 +02:00
Marek Bel
6674cbf0d7
Select material / temperature before first layer calibration.
2019-09-12 17:54:05 +02:00
leptun
ae839aee31
Merge branch 'MK3' into MK3_Translations
2019-09-12 16:28:36 +03:00
Marek Bel
6661d3aa45
Merge remote-tracking branch 'prusa3d/MK3' into MM_lay1_cal
2019-09-12 14:28:52 +02:00
DRracer
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
leptun
444daceca3
Move define as requested
2019-09-12 13:39:04 +03:00
leptun
78708903e8
Also update eeprom value
2019-09-12 07:16:31 +03:00
Marek Bel
43705aae2e
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
Marek Bel
ae3e6530e6
Do not ask for PLA filament in the beginning of first layer calibration. Do not ask if filament is present if it can be detected by IR sensor.
2019-09-12 00:14:24 +02:00
Marek Bel
14dc6b86e0
Change undocumented behaviour of M190 (Wait for bed temperature). Document M190 and M109 (Wait for extruder temperature).
...
Do not remember CooldownNoWait property set by M190 and M109. If M190 was invoked without parameters, CooldownNoWait property was set if it was previously set by "M109 S" or "M109 S" or printer was after power up. Otherwise CooldownNoWait was not set. Now CooldownNoWait is never set if M190 is invoked without parameters.
Saves 44 B of FLASH memory.
2019-09-11 23:37:09 +02:00
Marek Bel
acb0341a1f
Do not set temperature in lay1cal_preheat().
2019-09-11 22:42:40 +02:00