3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,573 Commits 3 Branches 78 Tags 40 MiB
6489c6f17f
Commit Graph

3631 Commits

Author SHA1 Message Date
DRracer
bce9f8c949
Merge pull request #2984 from leptun/MK3_Serial_LF_only 
Do not send CR on the serial line
 2021-01-26 08:42:47 +01:00
DRracer
c465417f50
Merge pull request #2987 from leptun/PFW-1144-LongPathName 
"M20 L" support. Print long filenames
 2021-01-26 08:40:26 +01:00
3d-gussner
84ed0725f2 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 08:32:03 +01:00
3d-gussner
bce8501eea Remove duplicate string Extruder using MSG_Extruder 2021-01-26 08:31:21 +01:00
Voinea Dragos
c6588193ad Fix some more stuff in cardreader.cpp 
Saved 4B of flash and 60B of RAM
 2021-01-26 09:25:41 +02:00
3d-gussner
ab18a3ccc3 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 08:24:11 +01:00
3d-gussner
530b9f50b8 Remove duplicate string Eject filament using MSG_EJECT_FILAMENT 
Fix few translations
 2021-01-26 08:22:08 +01:00
D.R.racer
348902240e Fix code_seen_P("fv") broken by one of the merges 2021-01-26 08:02:33 +01:00
3d-gussner
269fabc330 Remove duplicate string Cut filament using MSG_CUT_FILAMENT 2021-01-26 07:15:46 +01:00
3d-gussner
797d8e74a3 Remove duplicate string Checking X axis and Checking Y axis using MSG_CHECKING_X and MSG_CHECKING_Y 2021-01-26 07:10:57 +01:00
3d-gussner
2d1e1e4cee Remove duplicate string Fans check using MSG_FANS_CHECK 2021-01-25 20:13:12 +01:00
3d-gussner
d117a299f7 Remove duplicate string Fil. runouts using MSG_FIL_RUNOUTS 2021-01-25 20:04:18 +01:00
3d-gussner
10bbd64b41 Remove duplicate string Crash using MSG_CRASH 
Better Italian translation, thanks to @wavexx
Fix Polish translation as it was too long for the menue and caused LCD issues.
 2021-01-25 18:53:53 +01:00
3d-gussner
4878db7365 Remove duplicate string Last print failures using MSG_LAST_PRINT_FAILURES 
Fix too long translations in Spanish and Italian for this message
 2021-01-25 18:38:35 +01:00
3d-gussner
99867c8fbd Remove duplicate string Total failures using MSG_TOTAL_FAILURES 2021-01-25 18:06:47 +01:00
3d-gussner
8f0a45e8a4 Remove duplicate string Steel sheets and Total using MSG_STEEL_SHEETS and MSG_TOTAL 2021-01-25 17:58:51 +01:00
3d-gussner
7222cf05cf Remove duplicate string MMU Fails and MMU Load Fails using MSG_MMU_FAILS and MSG_MMU_LOAD_FAILS 2021-01-25 17:38:36 +01:00
3d-gussner
fbb3fad64b Remove duplicate string Last print using MSG_LAST_PRINT 2021-01-25 16:54:26 +01:00
3d-gussner
7891d12a32 Remove duplicate string Is filament loaded? using MSG_FILAMENT_LOADED 2021-01-25 16:44:55 +01:00
3d-gussner
223f32deae Remove duplicate string HW Setup" using MSG_HW_SETUP` 2021-01-25 16:15:57 +01:00
3d-gussner
5c1da227fe Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-25 16:00:46 +01:00
3d-gussner
377a59c624 Remove duplicate string Belt status 2021-01-25 15:53:31 +01:00
D.R.racer
d8917a304a Reuse lcd_space() instead of in-place printing of spaces in a cycle 
Saves another ~40B
 2021-01-25 15:21:25 +01:00
D.R.racer
783e4bbaf9 Add lcd_putc_at (code down >150B), refactor lcd_selftest_screen_step 
(RAM down 10B)
 2021-01-25 14:58:57 +01:00
DRracer
3975415490
Merge branch 'MK3' into codesize 2021-01-25 12:43:30 +01:00
DRracer
58351fb27a
Merge pull request #2977 from DRracer/farm-patch1 
Farmers' requests
 2021-01-25 11:15:44 +01:00
D.R.racer
514321f2ce Remove farm_no completely + reuse prusa_stat_farm_number() where 
applicable
 2021-01-25 11:09:28 +01:00
Voinea Dragos
2b3729125d Prevent wdt reset during file listing 2021-01-25 11:46:51 +02:00
D.R.racer
c1ff6242b0 Avoid copying FW version number into RAM - use the PROGMEM string 2021-01-25 09:03:04 +01:00
Voinea Dragos
4f769f0faa PRUSA RESET safety precaution 2021-01-25 09:58:12 +02:00
Voinea Dragos
9fa9d6b063 Move farm strings to PROGMEM 2021-01-25 09:48:17 +02:00
D.R.racer
6a62674bd8 Keep PRUSA RESET available even in non-farm mode 2021-01-25 08:43:37 +01:00
D.R.racer
98a4da571d Merge branch 'farm-patch1' of github.com:DRracer/Prusa-Firmware into farm-patch1 2021-01-25 08:39:20 +01:00
D.R.racer
9bfada94f0 Remove commented code 2021-01-25 08:38:44 +01:00
Voinea Dragos
e8e4aabfdb Add gcode documentation 2021-01-22 21:07:14 +02:00
Voinea Dragos
31a6270f69 Abuse \n in lcd printing instead of constantly calling other functions 
"other functions" being lcd_set_cursor and lcd_print(char). Saves 100B of flash
 2021-01-22 20:12:11 +02:00
Voinea Dragos
4d3f056b81 Fix factory reset menu rendering 2021-01-22 20:07:27 +02:00
Voinea Dragos
37c431abd9 another lcd_puts_at_P 2021-01-22 19:44:46 +02:00
D.R.racer
3ccd1b2b2b Refactor lcd_set_cursor + lcd_puts_P -> lcd_puts_at_P 
saves considerable amount of flash
 2021-01-22 18:34:47 +01:00
Voinea Dragos
bc7d36b6ff Fix sm4.h line ending 2021-01-22 18:57:24 +02:00
Voinea Dragos
da21916473 Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
D.R.racer
9b34789398 Cleanup reset_menu() 2021-01-22 17:54:44 +01:00
D.R.racer
90d22a376d Remove unused vars in xyzcal.cpp 2021-01-22 17:50:08 +01:00
D.R.racer
2780a03967 Improve duplicate_Tcode_ignored 
kudos to @leptun
 2021-01-22 17:47:44 +01:00
D.R.racer
3dc85b319c Marlin_main.cpp hacks 
- code_seen("string") -> code_seen_P(PSTR("string")) saved >100B of RAM!
- serial print "." -> '.' saved some code
- extract commonly used string
- SERIAL_PROTOCOLLN("") -> SERIAL_PROTOCOLLN() as no argument is
necessary
 2021-01-22 17:15:36 +01:00
D.R.racer
4dec171266 Reduce code by 104 bytes in xyzcal.cpp 
Extract CLAMP_median into a non-inline function.
The extra instructions to call that function do not matter from the
speed perspective
 2021-01-22 17:13:28 +01:00
D.R.racer
c710253cca Code cleanup and size reduction and RAM optimization 
Replase single character strings with single characters when calling
lcd_print
 2021-01-22 17:11:51 +01:00
Voinea Dragos
9fda6b774d Do not send CR on the serial line 2021-01-22 17:58:01 +02:00
DRracer
f809691003
Merge pull request #2968 from espr14/PFW-1186 
Calibration: reduce code size PFW-1186
 2021-01-22 14:05:13 +01:00
DRracer
eceb7b4e5f
Merge pull request #2981 from 3d-gussner/PFW-1140-2 
PFW-1140 Add fan speed and position auto report
 2021-01-22 13:00:23 +01:00
DRracer
defbaa6ff8
Merge branch 'MK3' into PFW-1186 2021-01-22 12:46:25 +01:00
DRracer
4c952a0a9c
Merge pull request #2962 from espr14/PFW-1178 
Calibration: code cleaning PFW-1178
 2021-01-22 12:41:24 +01:00
3d-gussner
008c6a2590 Remove defines 2021-01-22 12:26:29 +01:00
DRracer
ab59449b7c
Merge pull request #2961 from espr14/PFW-1179 
Calibration: print skew results PFW-1179
 2021-01-22 12:24:52 +01:00
DRracer
85f2c29dfe
Merge pull request #2960 from espr14/PFW-1169-3 
Calibration: more accelerations, fix scan, more robust circle search PFW-1169
 2021-01-22 12:20:35 +01:00
3d-gussner
ede3f34051 Documentation 2021-01-22 10:40:29 +01:00
Voinea Dragos
ced3d9fa77 "M20 L" support. Print long filenames 2021-01-22 11:13:44 +02:00
D.R.racer
31951fe8c9 Code refactoring 
Motivation:
- save some RAM joining the autoreport flags into 1 byte
- encapsulate the magic of setting bit masks/features into a class with
a stable public interface
 2021-01-20 11:46:25 +01:00
Voinea Dragos
70d254a1fc Allow resetting when not in farm mode 2021-01-19 13:39:21 +02:00
Voinea Dragos
48b4bdfe8e Make the PRUSA RESET command functional on the miniRambo 2021-01-19 13:36:08 +02:00
Voinea Dragos
542677c080 Prevent switching to serial port 1 on miniRambo and such 2021-01-19 13:11:48 +02:00
Voinea Dragos
9b847715ac Rename F0 to FRM on the status screen 2021-01-19 13:11:25 +02:00
Voinea Dragos
3f5cfc4e61 Move the change filament button to the main menu when farm printing 
PFW-945
 2021-01-19 13:06:23 +02:00
D.R.racer
a9d8ddc89c Farmers' requests 1 
- remove the UI and related stuff to setting a farm number (the
communication protocol must remain intact)
- remove confirmation after print finished ("Print OK")

Both requests are highly welcome, since they allow for lowering the code
size by >1KB

PFW-963, PFW-927
 2021-01-19 09:58:02 +01:00
3d-gussner
9264454d3a Gcode M123 only if FANCHECK and TACHOs are defined 
Gcode `M155` added parameter "C" to activate auto-report for temperatures, fans and positions
Updated doxygen
@todo Update RepRap Wiki
@todo improve code
 2021-01-19 09:01:46 +01:00
espr14
735895c6bc Use fabs 2021-01-14 16:38:34 +01:00
espr14
ca4e638ea2 Don't use extrusion in XYZ calibration 2021-01-14 13:19:30 +01:00
Alex Voinea
20c3f4cb77 Update comments 2021-01-14 12:53:12 +02:00
Voinea Dragos
dea3f23a69 PRUSA SN in eeprom 2021-01-14 11:52:22 +02:00
espr14
9867ecd3f9 Reduce unnecessary code 2021-01-13 13:59:20 +01:00
espr14
21d6f970ef Fix build 2021-01-12 16:26:46 +01:00
espr14
f3faf651c5 Move down before scanning 2021-01-12 16:12:34 +01:00
espr14
9dceb488b6 Revert double scanning 2021-01-12 16:04:04 +01:00
espr14
546812294e Clean serial output 2021-01-12 00:34:28 +01:00
espr14
d7507649d8 Remove degree char 2021-01-12 00:28:46 +01:00
espr14
180af46fe4 Try double height 2021-01-12 00:27:06 +01:00
espr14
333526f65d Single skew output 2021-01-11 23:14:12 +01:00
espr14
e6e44fe188 Convert to degrees 2021-01-11 23:13:08 +01:00
espr14
b8443b00ad Reverse reverse 2021-01-11 22:18:50 +01:00
espr14
09892bec52 Reverse 2021-01-11 18:46:56 +01:00
Yuri D'Elia
78f8f1e8f9 Remove stray serial newlines in fsensor autoload messages 2021-01-11 18:31:36 +01:00
espr14
211e5f5f37 Define DBG output 2021-01-11 17:31:26 +01:00
espr14
904a23b69e Report calibration results 2021-01-11 17:02:41 +01:00
espr14
2e40a27460 Alignment, comments 2021-01-11 15:40:12 +01:00
DRracer
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating 
Raise Z while preheating when auto/[un]loading the filament
 2021-01-11 07:45:54 +01:00
DRracer
1a6b6fb491
Merge pull request #1776 from wavexx/unused_tmc_defines 
Remove an unused define
 2021-01-11 07:43:44 +01:00
DRracer
ef51652e39
Merge pull request #1758 from wavexx/disable_filament_checks_in_extr_menu 
Disable filament checks inside the Move -> Extruder menu
 2021-01-11 07:42:25 +01:00
3d-gussner
a064ce4722 Add gcode M123 Tachometer value 2021-01-10 15:15:44 +01:00
D.R.racer
8a083c9970 Add PVB preheat and 0.8mm nozzle presets 
minor features reflecting the latest announcement

Needs some 300B of CPU flash though, after 3.9.3 we need to optimize code
size again.
 2021-01-08 13:52:39 +01:00
DRracer
5c3513a6cc
Merge pull request #2397 from odaki/flashair_display_ip 
Show the FlashAir IP address
 2021-01-08 12:20:12 +01:00
espr14
584177e8fd Fix E mask 2021-01-08 10:24:36 +01:00
DRracer
f549ce690a
Merge pull request #2949 from prusa3d/MK3_3.9.3 
Merge 3.9.3 back into MK3
 2021-01-08 10:20:40 +01:00
3d-gussner
3329d34ce4 Fix doxygen issue with "^" and "|" only in one line 
Doxygen 1.8.13 had no issues but newer doxygen version are failing
to build tables, if a line only consists of "^" and "|"
 2021-01-08 09:40:13 +01:00
DRracer
0ed6b537a8
Merge branch 'MK3' into MK3_3.9.3 2021-01-07 13:27:51 +01:00
D.R.racer
603d704178 Version changed (3.9.3 build 3556) 2021-01-07 12:50:58 +01:00
3d-gussner
8a27b6abdb Move Z up before xy home running xyz calibration 
to prevent scratches on bed and sheet
 2021-01-07 11:45:40 +01:00
espr14
2981b9e9c5 OctoPrint needs new lines 2021-01-04 14:59:12 +01:00
espr14
cc9e7b9376 Fix comments, remove unused 2021-01-04 13:01:06 +01:00
espr14
49d57ed621 Median dynamic circle 2020-12-30 17:02:31 +01:00
espr14
a9fd09ca3f Implement median 2020-12-30 15:15:17 +01:00
espr14
13fefaa1bf Fix typo 2020-12-30 15:01:32 +01:00
espr14
03b87ae68b Add 8 pixel circle pattern 2020-12-30 13:08:47 +01:00
espr14
c14e725574 Fix moves 2020-12-29 18:27:33 +01:00
espr14
c2ab8785f4 Revert Manhattan 2020-12-29 17:31:34 +01:00
espr14
c1e6567461 Fix step axis coding 2020-12-29 17:17:32 +01:00
espr14
922769cefb axis -> axes 2020-12-29 17:14:18 +01:00
espr14
a01dfe26fe Add Manhattan movement 2020-12-29 17:13:11 +01:00
espr14
6461206e08 Fix direction setting 2020-12-29 14:19:05 +01:00
espr14
b6e78bf900 Fix direction 2020-12-29 14:08:30 +01:00
espr14
c11e8654da Revert both directions, refactor code 2020-12-29 12:39:35 +01:00
espr14
e86ba5e26d Scan only once 2020-12-28 16:45:39 +01:00
D.R.racer
7e02a7f118 Version changed (3.9.3-RC1 build 3555) 2020-12-26 15:45:34 +01:00
DRracer
d61cdf2b88
Merge pull request #2932 from espr14/PFW-1165-2 
Calibration: Turn off speed optimization due to MK2.5 PFW-1165
 2020-12-25 18:22:04 +01:00
espr14
80e32ce1a5 Turn off speed optimization due to MK2.5 2020-12-25 15:27:42 +01:00
3d-gussner
12f4102272 Group PINDA defines 2020-12-23 21:00:02 +01:00
3d-gussner
76eb743139 Set default SuperPINDA toggle on MK2.5/S to NO 2020-12-23 20:59:33 +01:00
3d-gussner
4b510fef0a Add PINDA_TEMP_COMP variable to enable SuperPINDA toggle menu/function 2020-12-23 20:59:08 +01:00
3d-gussner
a97587f373 Changed PINDA_MINTEMP having own value 
Prevent bad readings/issues if someone changes the bed thermistor that is "better" with lower min values and creates a custom firmware.
The firmware will now be in the range of the PINDAv2 thermistor independant from the bed thermistor (which may change and need adjustments)
 2020-12-23 20:58:44 +01:00
3d-gussner
732b6e0cad Cleanup 2020-12-23 20:58:20 +01:00
3d-gussner
62c36f718b Add SuperPINDA support for MK2.5/S 
- Changed DETECT_SUPERPINDA to SUPERPINDA_SUPPORT as on miniRAMo the thermistor readings below 30°C
  aren't accurate egnough to determine if SUPERPINDA is connected or not
- Add LCD toggle menu Settings -> HW Setup -> SuperPINDA [Yes/No] to overwrite SuperPINDA detection
  - If EEPROM_PINDA_TEMP_COMPENSTATION is empty = 0xff then detect SuperPINDA by checking thermistor
  - If EEPROM_PINDA_TEMP_COMPENSTAION is 0 then forec enable for temperature compensation menues and functions
  - If EEPROM_PINDA_TEMP_COMPENSATION is 1 then force disable for temperature compensation menues and functions
 2020-12-23 20:56:50 +01:00
espr14
e6eb3be247 Set jerk = 1, accel. = 1000 2020-12-23 16:56:04 +01:00
espr14
979525f028 Add more restarts 2020-12-22 19:34:12 +01:00
espr14
25d138d198 Revert max.speed 2020-12-22 15:10:01 +01:00
espr14
e24a763e46 Cleanup 2020-12-22 14:45:55 +01:00
espr14
8df2eccf45 Remove defines and unused vars 2020-12-22 14:36:37 +01:00
espr14
25d6e24778 Add comments 2020-12-22 14:16:20 +01:00
espr14
90c8045f7d Clean the code 2020-12-22 13:59:50 +01:00
espr14
20659ec818 Add debug output 2020-12-22 12:51:22 +01:00
espr14
c397e9249a Restart scanning 2020-12-21 19:33:36 +01:00
espr14
1610c96fc4 Fix and report circle divergence 2020-12-21 18:05:52 +01:00
espr14
744763f0a9 Fix diagonal movement 2020-12-21 17:34:54 +01:00
espr14
de23a845b4 Remove unused 2020-12-21 15:53:51 +01:00
espr14
3c9168f8f6 Optimize diagonal 2020-12-21 15:52:25 +01:00
espr14
9a59369c77 Diagonal acceleration 2020-12-21 15:32:09 +01:00
espr14
27ff6b0057 Fix build 2020-12-21 13:11:48 +01:00
espr14
9b55ff9de1 Acceleration up and down 2020-12-21 13:05:26 +01:00
espr14
f39a0999e1 Prepare full acceleration control 2020-12-18 21:33:43 +01:00
espr14
ccf26e4e7a Basic acceleration 2020-12-18 20:04:00 +01:00
espr14
a8f4207df9 New XYZ calibration algorithm 2020-12-17 18:19:36 +01:00
Alex Voinea
2ac106d9fe
Merge branch 'MK3' into MK3_random_patches 2020-11-30 09:14:58 +02:00
odaki
61c48df0bd Merge remote-tracking branch 'upstream/MK3' into flashair_display_ip 2020-11-23 15:53:03 +09:00
Voinea Dragos
f96f75bd17 Fix warning and a bit of indentation 
Saved 64B of flash and 1B of SRAM
 2020-11-16 10:58:26 +02:00
Voinea Dragos
f3953d7c83 Merge branch 'MK3' into MK3_random_patches 2020-11-16 09:11:12 +02:00
odaki
c0070506fb Merge branch 'MK3' into flashair_display_ip 2020-11-13 22:28:22 +09:00
DRracer
d013abfd52
Merge pull request #2890 from prusa3d/MK3_3.9.2 
Merge MK3_3.9.2 into MK3
 2020-11-13 13:03:35 +01:00
Alex Voinea
807eddafb0
Remove debugging code 2020-11-13 12:12:18 +02:00
Alex Voinea
43ace00a24
Fill the progress bar at the end and code optimizations 2020-11-12 18:43:48 +02:00
Alex Voinea
5ad125cbed
Merge branch 'MK3' into MK3_filecheck_progress_bar 2020-11-12 15:53:33 +02:00
D.R.racer
396ee0fde2
Version changed (3.9.2 build 3524) 2020-11-10 10:27:18 +01:00
Voinea Dragos
176e2674b9 Fix M105 ok hack 2020-11-09 21:49:56 +02:00
Voinea Dragos
023ccb0e89 Fix double ok in M603 2020-11-09 21:49:56 +02:00
Alex Voinea
0c305ee5f5 Fix warning 2020-11-09 21:49:56 +02:00
Alex Voinea
4abf1f436a Gracefully dump the queue + fixes to fancheck 2020-11-09 21:49:56 +02:00
Alex Voinea
fdbbc7d62a Terminate last line from the SD card even if it doesn't have a \n 2020-11-09 21:49:56 +02:00
Alex Voinea
ff56ece6f8 Remove redundant get_command prototype 2020-11-09 21:49:56 +02:00
Alex Voinea
5f0e4a1cac Temporary M602 patch. Needs more work 2020-11-09 21:49:56 +02:00
Alex Voinea
6873a9d28e Only send capabilities when M115 is run without arguments 2020-11-09 21:49:56 +02:00
Alex Voinea
0ee8e1f424 Fix missing ok in M601 2020-11-09 21:49:56 +02:00
Alex Voinea
e5ebf7c67f Fix missing keep-alive messages 2020-11-09 21:49:56 +02:00
Alex Voinea
26f62f042e Use the longest filename instead of just using the long filename in M27 2020-11-09 21:49:56 +02:00
D.R.racer
4747c8c9f5 Increase top Z-offset limit based on some test results 2020-11-09 12:29:19 +01:00
D.R.racer
5184910ef9 Try harder finding the calibration center 
with alternative PINDAs it looks like their properties vary a lot
and searching for the calibration center requires trying different
Z levels.
 2020-11-09 06:33:41 +01:00
D.R.racer
cd4e16ef9f XYZ calibration tune 
PFW-1159
 2020-11-06 08:25:56 +01:00
Yuri D'Elia
e28159122f Make MIN_Z_FOR_LOAD/UNLOAD the same 
When unloading + preheat immediately followed by a load, the carriage is
raised first up to 20mm, then again to 50mm.

With PR #2318 it makes sense to make more space for the extra extrusion
anyway, so make them the same. This moves the carriage only once _while_
preheating, which is nice.
 2020-10-29 15:30:16 +01:00
Yuri D'Elia
5f23474c95 Raise Z while preheating when auto/[un]loading the filament 
Preheating already raised Z to avoid scorching the PEI sheet, as does
filament loading/unloading to allow for excess material to be removed.

However, when loading/autoloading/unloading via the LCD with a cold
nozzle the preheating menu is performed before the carriage is raised,
leaving the carriage close to the sheet while heating the nozzle.

Pre-raise the carriage already while waiting, so that the subsequent
move is automagically skipped.

Set bFilamentWaitingFlag only once to perform both the LCD
initialization and raising to the appropriate height.

Should fix #2761
 2020-10-28 20:49:28 +01:00
DRracer
c05d4c9112
Update messages.h 
cleanup space
 2020-10-21 17:04:20 +02:00
MartinPoupa
a84d7ef8d6 corectino of declaration 2020-10-13 16:56:57 +02:00
MartinPoupa
c8c7563e8a LCD status changed 
When the lcd status changed it will be printed "LCD status changed" to serial line.
 2020-10-07 17:44:17 +02:00
Yuri D'Elia
df824414ef Fix probing in IR_SENSOR 2020-09-28 21:02:06 +02:00
Yuri D'Elia
c2e8d229a7 Be more compliant in the I2C protocol 
- Enter a repeated-start for reading data
- Write in the same session
 2020-09-28 20:21:07 +02:00
odaki
ebc987bd23 Merge branch 'MK3' into flashair_display_ip 2020-09-28 21:19:44 +09:00
Yuri D'Elia
384f40956c Remove obsolete cbi/sbi 2020-09-27 16:42:20 +02:00
Yuri D'Elia
6d476d7144 Still use SWI2C on RAMBo10a boards 
The wiring for the PAT9125 on RAMBo10a boards is not directly connected
to the SCL pin and requires the sw mode.

Detect this requirement by checking the definition for the SWI2C_SCL pin
in the board definition.

Remove SWI2C_SCL/SDA from the other boards to use the HW mode.
 2020-09-27 14:29:07 +02:00
DRracer
134f841380
Merge pull request #2841 from leptun/MK3_SD_REMOVED_MESSAGE 
SD card released message
 2020-09-23 10:22:04 +02:00
DRracer
95e2e2f69c
Merge pull request #2832 from leptun/MK3_AUTO_REPORT_TEMPERATURES 
Mk3 auto report temperatures
 2020-09-23 08:51:26 +02:00
DRracer
ef0840f587
Merge pull request #2786 from leptun/MK3_M115_Capabilities_report 
Printer Capabilities framework + Macros + Code cleanup
 2020-09-23 08:37:03 +02:00
Alex Voinea
d9fa44c142
Document M155 command 2020-09-23 09:14:35 +03:00
DRracer
e24466f22e
Merge pull request #2837 from prusa3d/MK3_3.9.1 
Merge MK3_3.9.1 into MK3
 2020-09-22 10:43:59 +02:00
odaki
4c7100985e Merge branch 'MK3_3.9.1' into flashair_display_ip 2020-09-22 11:59:05 +09:00
D.R.racer
7278458316 Version changed (3.9.1 build 3518) 2020-09-18 16:59:22 +02:00
3d-gussner
bd7bb5acb3
Update new messages and their translations (#2835) 
* Add missing translations

* Add missing CZ and IT translations

* Update CZ, FR, IT, ES translations
CZ thanks to @DRracer
FR thanks to Carlin Dcustom
ES tried myself
IT thanks to @wavexx

Only missing is PL

* Improve wording +change keys

* Add missing PL translations

* Fix copy paste error in Italian
fix double translations

* Make PL translation shorter

* Fix some length issues and capital letters

* Fixed again translations length issues
updated po files

* Update FR translation - thanks @awenelo

* Fix execution of lang-check.py

- Make lang-check.py executable
- Execute directly instead of specifying the python interpreter manually
  ("python" is no longer available on Debian, and would default to
  version 2 prior to that despite being written for python 3)

* Fix permissions of translation files

Co-authored-by: D.R.racer <drracer@drracer.eu>
Co-authored-by: Yuri D'Elia <wavexx@thregr.org>
 2020-09-18 16:50:25 +02:00
Voinea Dragos
2f5083daa7
quickfix to mistake made in the experimental menu visibility code 
Fix indentation
 2020-09-15 18:56:39 +03:00
DRracer
9fb6efc435
Add newline at the end of file 2020-09-15 14:56:41 +02:00
Voinea Dragos
c0fced2f3c Fix typo 2020-09-15 14:21:21 +03:00
Voinea Dragos
e2ef5af40e Add capability line 2020-09-15 14:21:09 +03:00
Voinea Dragos
a1dfbffedb Merge branch 'MK3_M115_Capabilities_report' into MK3_AUTO_REPORT_TEMPERATURES 2020-09-15 13:39:00 +03:00
Voinea Dragos
073eadff7e Merge branch 'MK3' into MK3_AUTO_REPORT_TEMPERATURES 2020-09-15 13:38:47 +03:00
DRracer
3093c8c7f6
Merge pull request #2829 from wavexx/la10_15_readjust 
Re-adjust LA10->15 conversion
 2020-09-15 11:59:07 +02:00
Alex Voinea
6bc59197ad
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION 2020-09-12 08:28:13 +03:00
Alex Voinea
c158259970
Remove unused where C++ alternative can be used 2020-09-11 20:04:06 +03:00
Alex Voinea
44b1b1c219
More macros 2020-09-11 18:48:44 +03:00
Alex Voinea
c3abd4ffe6
Remove io_atmega2560.h and some more macros 2020-09-11 17:43:38 +03:00
Alex Voinea
eb007c35d2
Macros initial 2020-09-11 16:12:49 +03:00
Alex Voinea
160af0a624
Printer capabilities 2020-09-11 16:11:28 +03:00
3d-gussner
fef5b02010 Tag as community contribution 2020-09-09 12:34:25 +02:00
3d-gussner
4d3aa1b59a Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch 
Merge upstream/MK3
Fix conflicts
update Dutch translation
 2020-09-09 11:37:35 +02:00
DRracer
f145769e98
Merge pull request #2807 from leptun/MK3_Polling 
M220 M221 polling of values
 2020-09-09 10:25:36 +02:00
DRracer
763d2d9849
Merge pull request #2806 from leptun/MK3_PRUSA_SN 
Make the serial number available to the user
 2020-09-09 09:54:29 +02:00
DRracer
a0420c7928
Merge pull request #2619 from 3d-gussner/MK3_G21 
Add dummy G21 to prevent UNKOWN warnings in serial
 2020-09-09 09:22:07 +02:00
DRracer
b82ee3fc06
Merge pull request #2811 from leptun/MK3_fastio_timer_patch 
Fix fastio extra parenthesis
 2020-09-09 08:57:37 +02:00
DRracer
a2db9e8f6b
Merge pull request #2585 from leptun/MK3_FEEDRATE 
🐛♻️ Update the feedrate percentage before drawing the screen
 2020-09-09 08:56:46 +02:00
Yuri D'Elia
26e900896a Re-adjust LA10->15 conversion 
After fixing some LA15 issues, the strenght of LA15 increased.
As such, re-adjust the conversion factor so that:

Start K10 => 0.01 (previous minimum was K15)
PLA   K30 => 0.05 (was 0.07, optimal 0.045-0.06)
PETG  K45 => 0.08 (was 0.13, optimal 0.07-0.11 depending on material/temp)
 2020-09-07 21:44:34 +02:00
Alex Voinea
7ac16d5f04
Menu view return patch 2020-09-07 19:42:53 +03:00
D.R.racer
02891f6bb8 Version changed (3.9.1-RC1 build 3512) 2020-09-02 11:56:53 +02:00
Alex Voinea
3e7bba54e0
SD card released message 2020-08-28 17:32:07 +03:00
Yuri D'Elia
e37cdab38f PAT9125_I2C: accept either NACK or ACK in receive 
Both would be technically correct.
 2020-08-25 12:15:55 +02:00
Yuri D'Elia
d8a8837938 Document the 3 possible modes 2020-08-25 11:32:05 +02:00
Alex Voinea
1659f61dd5
Fix fastio extra parenthesis 2020-08-21 10:51:46 +03:00
Yuri D'Elia
30e7b777e0 Error-out with PAT9125_SWSPI (not fully implemented) 
.. and likely will never was/be.
 2020-08-20 22:13:13 +02:00
Yuri D'Elia
7f425120f0 Strip down the TWI code 
- Only implement a single syncronous read/write function to read a byte,
  since that's all we need currently
- Implement a compact IR_SENSOR probe for PAT9125
- Saves 242 bytes compared to PAT9125_SWI2C
 2020-08-20 22:13:04 +02:00
DRracer
772844678f
Merge pull request #2809 from leptun/PFW-1134-ALTFAN_KILLSWITCH 
Pfw 1134
 2020-08-20 15:42:03 +02:00
Yuri D'Elia
240dc1132e Include initial implementation based on Arduino's twi 2020-08-20 15:34:46 +02:00
Yuri D'Elia
502bc8c72d Isolate more pat9125 code 
Remove probing from Marlin_main and move it into pat9125_probe so that
it can support the various variants.
 2020-08-20 15:34:46 +02:00
3d-gussner
90c36a5887
Update ALTFAN eeprom documentation 
EEPROM_ALTFAN_OVERRIDE and EEPROM_EXPERIMENTAL_VISIBILITY are compared to 0xFF in the code that's why I keep the uint8.
 2020-08-20 15:14:39 +02:00
Alex Voinea
2c2926882a
Don't switch unnecessarily. Also "\n" the ";S" request 2020-08-18 19:29:18 +03:00
Alex Voinea
8d9dc73d1b
Fix compile error 
fix compile


Fix compile error
 2020-08-12 17:25:49 +03:00
Alex Voinea
5530b99882
Reboot after factory reset 2020-08-12 12:46:35 +03:00
Alex Voinea
6b853a4cc3
Auto-detect ALTFAN after fw. update 2020-08-12 12:19:08 +03:00
Alex Voinea
96435ad084
Move experimental menu to HW setup 2020-08-12 08:48:12 +03:00
DRracer
008d3b0e65
Merge pull request #2792 from wavexx/MK3_fix_high_speed_deceleration 
Mk3 fix high speed deceleration
 2020-08-06 13:27:52 +02:00
DRracer
89ecf2ce3a
Merge pull request #2791 from wavexx/stack_protect_reentrant_isr 
Fix stack smashing in temperature/fsensor ISR
 2020-08-06 13:26:33 +02:00
DRracer
d0eca4d5c4
Merge pull request #2794 from leptun/PFW-1134-ALTFAN_KILLSWITCH 
Minor documentation fixes to altfan PR
 2020-08-06 12:53:34 +02:00
Alex Voinea
f1a8657093
Minor documentation fixes 
Add even more comments


a
 2020-08-06 12:20:38 +03:00
DRracer
22a8c18551
Merge pull request #2784 from leptun/PFW-1134-ALTFAN_KILLSWITCH 
altfan killswitch
 2020-08-06 08:15:42 +02:00
Yuri D'Elia
b3af08d94a Fix stack smashing in temperature/fsensor ISR 
The temperature and fsensor ISR re-enable interrupts while executing.

However, we still need to protect the epilogue of the ISR so that
the saved return address is not altered while returning.

We hoist the body of the function out of the isr in both cases for
clarity (and to avoid a stray return bypassing the lock/cli), so that
the re-entrant portion is clearly indicated.

This should fix the "STATIC MEMORY OVERWRITTEN" error messages randomly
happening when stepping at high frequency (where either isr is
preempted more frequently).
 2020-08-05 17:47:46 +02:00
DRracer
f1bde1a039
Merge pull request #2724 from wavexx/max_ambient 
Implement MIN/MAX AMBIENT safety checks
 2020-08-05 08:52:55 +02:00
Yuri D'Elia
a2c7dcbbf8 Fix indentation 2020-08-04 13:14:35 +02:00
Alex Voinea
654a3a0d79
Other requested changes 2020-08-04 10:43:30 +03:00
Alex Voinea
e0bf92cd4e
Change bool literal to int 2020-08-04 09:54:57 +03:00
Yuri D'Elia
b8e8f182ca Add reference C implementations for MultiU16X8toH16/MultiU24X24toH16 
Higher step counts might still overflow the ASM MultiU24X24toH16.

e4595fa24a
 2020-08-03 19:03:13 +02:00
Yuri D'Elia
30a806608f Also convert acceleration_rate to uint32_t 
acceleration_rate is also unsigned
 2020-08-03 19:01:38 +02:00
Yuri D'Elia
aebaca5cdc Correct comments regarding acceleration ramp 
Backport fixes from upstream Marlin
 2020-08-03 18:53:13 +02:00
Yuri D'Elia
8108d50b59 Reintroduce/fix check for step_rate underflow during deceleration 
Check for negative results and results under the final_rate
 2020-08-03 18:53:13 +02:00
Yuri D'Elia
4654283f54 Restore indentation 2020-08-03 18:16:20 +02:00
Alex Voinea
12be141188 Fix high speed deceleration 2020-08-03 18:16:13 +02:00
Yuri D'Elia
a8ce9358e5 Avoid redundant temperature error strings 
Factor-out MIN/MAXTEMP [BED/AMB] out of the error message, which is now
built at runtime instead.

Introduce two missing ultralcd functions lcd_setalertstatus and
lcd_updatestatus to handle regular strings.

246272 -> 246084 = 188 bytes saved
 2020-08-01 17:47:42 +02:00
Yuri D'Elia
e1c79c342d Re-introduce redundant disable_heaters() calls 
Partially revert 285b505c73a54e9af01816e3a614de73ad181851 so that
we ensure heaters are disabled ASAP in case of potential bugs
in the max_*_error functions.
 2020-08-01 17:47:20 +02:00
Yuri D'Elia
a60ed81a35 Implement MIN/MAX AMBIENT safety checks 
Take advantage of the NTC thermistor found on the Einsy as an additional
safety measure, following the steps of the other MIN/MAXTEMP errors.

Introduce two configurable params AMBIENT_MINTEMP and AMBIENT_MAXTEMP
in the variant defines and set them for the MK3/MK3S to -30/+100
respectively.

AMBIENT_MINTEMP is primarily intended to catch a defective board
thermistor (to ensure MAXTEMP would be properly triggered) and thus the
trigger temperature is set just above the sensing limit and well below
the operating range.

AMBIENT_MAXTEMP is set at 100C, which is instead 20C above the maximum
recommended operating temperature of the Einsy. The NTC thermistor is
located just above the main power connector on the bottom of the board,
and could also help in detecting a faulty connection which can result in
rapid overheating of the contacts.

As for MAXTEMP, we cut power to the heaters, print fan and motors to
reduce power draw. Resume is not possible except by resetting the
printer, since the user is highly advised to inspect the board for
problems before attempting to continue.
 2020-08-01 17:38:10 +02:00
Yuri D'Elia
3336db7954 Add some important notes about thermistor ADC handling 2020-08-01 17:36:43 +02:00
Yuri D'Elia
65f25b0d7e Remove redundant disable_heater() calls in max/min_temp handling 
In max/min_temp handlers remove the redundant disable_heater() call.
Handlers already need to call Stop(), which will disable all heaters
as the first step.

Fix comments in order to mention that all heaters get disabled.
Use "MAX/MINTEMP BED" correctly in both the LCD and serial.
 2020-08-01 17:36:43 +02:00
Yuri D'Elia
942fca5b66 Remove useless assignment 
target_temperature_bed is already reset by disable_heaters() in Stop()
 2020-08-01 17:36:43 +02:00
Yuri D'Elia
87bc5a78b6 Remove bogus comment (BED_MINTEMP *is* implemented) 2020-08-01 17:36:43 +02:00
Yuri D'Elia
feafc5e5ab Alternative schedule for LA ticks 
Remove most of the original complexity from advance_spread.

Instead of accumulating time to be scheduled, plan ahead of time each
eISR tick using the next main interval + an accumulator (eISR_Err),
which keeps everything much simpler.

The distribution of the advance ticks is now using the real LA
frequency, which leaves a bit more time between the last LA tick and
the main stepper isr.

We take advantage of the accumulator to force a LA tick right after the
first main tick, which removes a +/- 1 scheduling error at higher step
rates.

When decompressing, we force 2 steps instead, so that the direction
reversal happens immediately (first tick zeros esteps, second inverts
the sign), removing another +/- 1 error at higher step rates.
 2020-07-29 19:14:48 +02:00
Alex Voinea
773c6997ef
Add comments 2020-07-29 17:36:03 +03:00
Alex Voinea
ec6a20971e
Add experimental menu to HW_setup 2020-07-29 11:23:24 +03:00
Alex Voinea
d8fbd46cd2
M155 2020-07-23 17:28:25 +03:00
Alex Voinea
e2856ba4f5
Make the serial number available to the user 2020-07-21 12:52:04 +03:00
Alex Voinea
a95feb56d9
ALTFAN override 2020-07-20 19:35:25 +03:00
Yuri D'Elia
a08ca19ade Make flow correction optional, disabled by default 
If you're using flow to correct for an incorrect source diameter, which
is probably the main usage when using the LCD, then LA shouldn't be
adjusted.

It's still unclear what the effect of M221 in gcode should be regarding
overall extrusion width. If M221 means "thicker lines", then LA should
also be adjusted accordingly.

This stems from the fact that the source diameter/length needs to be
known in order to determine a compression factor which is independent of
the extrusion width, but the FW only ever sees one value currently (the
extrusion length) which combines both.

This makes it impossible for the FW to adjust for one OR the other
scenario, depending on what you expect for M221 to mean.
 2020-07-20 14:33:45 +02:00
Yuri D'Elia
9b8f642b28 Account for flow adjustments in LA 
The e/D ratio should be calculated using the extrusion length.

As such, purify the e_D_ratio from the current extruder multiplier in
order to account correctly for flow adjustments.
 2020-07-19 17:41:38 +02:00