PavelSindler
7ec45271c2
timeout to status, better print time counting when using pause print
2017-04-21 16:29:04 +02:00
PavelSindler
4eaefd923a
configuration files updated
2017-04-19 16:41:59 +02:00
PavelSindler
c03a18f8c3
czech messages added, temperature calibration is off in fresh eeprom, pinda preheat phase is not used unless calibration was run, pause print works with gcode absolute and relative extruder mode, move z higher after selftest
2017-04-19 16:15:11 +02:00
PavelSindler
329e1ac9bb
waiting for PINDA to cool down
2017-04-13 16:51:30 +02:00
PavelSindler
4de9b1c9f6
temp calibration on/off initialization when updating firmware
2017-04-13 16:15:34 +02:00
PavelSindler
70b6e13de4
farm mode activation and farm number initialization handled when upgrading firmware versions and when flashing to new eeprom
2017-04-13 15:25:56 +02:00
PavelSindler
803d19aa86
preheat error for bed
2017-04-13 14:57:59 +02:00
PavelSindler
767d34fff8
added blanking time for button debouncing, lcd_clicked() improved, fan selftest code slightly modified
2017-04-12 11:25:10 +02:00
PavelSindler
e061209fc2
mesh bed leveling flag
2017-04-10 20:48:44 +02:00
PavelSindler
ba36fbbfa3
endif removed
2017-04-10 11:53:20 +02:00
PavelSindler
fc221fbea5
Merged PINDA temp calibration branch into MK2
2017-04-10 11:10:03 +02:00
PavelSindler
7b962d666f
pause print statistics
2017-04-07 14:56:52 +02:00
PavelSindler
2060d319f5
faster load filament, extrusion before unload filament
2017-04-07 12:12:16 +02:00
PavelSindler
fab71ff7cf
information that temp calibration active is active is stored to eeprom
2017-04-06 19:56:01 +02:00
PavelSindler
ccdf5e9c41
Message that temp calibration has not been run yet is displayed only if temp. calibration is activated
2017-04-06 19:44:03 +02:00
PavelSindler
08a59f7fef
status messages for temp calibration added, initial versoin of temp calibration on/off from menu
2017-04-06 18:57:11 +02:00
PavelSindler
abadaa5885
added retraction to preheat, no waiting when running mesh bed leveling from calibration menu
2017-04-06 13:14:30 +02:00
PavelSindler
56f5975083
XYZ calibration first round: if least square error is bigger than threshold value, run another iteration
2017-04-05 18:35:26 +02:00
PavelSindler
d9fc29273e
statistics for stop print changed
2017-04-04 13:41:20 +02:00
PavelSindler
7086764d35
different preheat error messages for bed and hotend
2017-04-03 15:28:03 +02:00
PavelSindler
53938e2280
added defines for long pause print, button long press and pid tuning
2017-04-03 11:03:10 +02:00
PavelSindler
762167fb00
Merge remote-tracking branch 'ayourk/MK2' into MK2
2017-03-31 18:49:23 +02:00
PavelSindler
6d9ab7109f
fixed pid calibration finish status
2017-03-31 17:20:05 +02:00
PavelSindler
870f85ce61
PID tuning from menu
2017-03-31 17:12:16 +02:00
PavelSindler
759f53e301
Merge branch 'MK2' of https://github.com/PavelSindler/Prusa-Firmware
2017-03-30 17:39:21 +02:00
PavelSindler
6ffc022633
stop print statistics needs to finish, lcd_licked function improved to work with long press button, selftest bug fixed; stop print, pause print and live adjust are hidden in mesh bed leveling and auto home
2017-03-30 16:48:10 +02:00
PavelSindler
64f4181451
initial version of long pause
2017-03-28 17:29:10 +02:00
PavelSindler
14e4c80e7e
Merge branch 'MK2' into MK2
2017-03-23 15:05:47 +01:00
PavelSindler
7daf6b2efd
dont use blocking encoder for button press, lcd_update(false) added to setup function
2017-03-23 14:38:18 +01:00
PavelSindler
8c35b18ed4
Merge pull request #65 from PavelSindler/MK2
...
M304 doues not survive reboot fixed, farm mode activation fixed, xyz cal. messages fixed
2017-03-23 12:06:15 +01:00
PavelSindler
65a2700b97
return to previously active menu after long press
2017-03-23 11:56:48 +01:00
PavelSindler
ed5842d1d1
Rx buffer overflow behavior improved
2017-03-22 18:43:19 +01:00
PavelSindler
04f8e6d61e
long press in non-modal mode
2017-03-21 17:10:04 +01:00
PavelSindler
0dc93b91bc
lcd_buttons_update in interrupt
2017-03-20 11:50:30 +01:00
PavelSindler
fb8ba9c151
interrupt dont use, another iteration
2017-03-20 10:34:37 +01:00
PavelSindler
31c7469b79
long press init
2017-03-17 10:26:15 +01:00
PavelSindler
e7dfb98a4f
M304 does not survive reboot fixed
2017-03-15 17:55:14 +01:00
PavelSindler
af962b7473
none
2017-03-15 15:56:42 +01:00
PavelSindler
3017decb9a
fixed undesirable farm mode activation after flashing new firmware
2017-03-15 14:36:58 +01:00
PavelSindler
0dee7b78ed
fixed message when serching first point in xyz cal.
2017-03-15 14:06:03 +01:00
PavelSindler
971288063e
Merge pull request #56 from acortellini/patch-1
...
Bug: M20 - List SD card
2017-03-14 13:04:08 +01:00
PavelSindler
2d05ae6be5
ping time prolonged to 60s
2017-03-13 14:49:29 +01:00
PavelSindler
716b0bd1c7
ping time prolonged to 60s
2017-03-13 14:49:01 +01:00
PavelSindler
9411d1dcc5
Merge pull request #60 from PavelSindler/MK2
...
farm mode: printer sends farm number and status, no ping acoustic allert
2017-03-13 14:45:15 +01:00
PavelSindler
7ad319a16a
farm mode: printer sends farm number and status, no ping acoustic allert
2017-03-13 14:40:26 +01:00
PavelSindler
43710fc9b7
Merge pull request #57 from PavelSindler/MK2
...
farm mode ping, PRN1 sends farm number
2017-03-07 19:25:03 +01:00
PavelSindler
a821f8d488
ping for farm mode added
2017-03-07 19:21:14 +01:00
PavelSindler
7883d4eb4d
ping for farm mode added
2017-03-07 19:20:49 +01:00
PavelSindler
608717d110
farm mode: detection if printer is connected to monitoring, PRN1 sends also farm number
2017-03-07 19:19:13 +01:00
Alfredo
7b86fa6016
Bug: M20 - List SD card
...
When the SD card is inserted in a Mac computer some special directory are written. The purse firmware is unable to navigate those directory and generates an error sent showed on the serial line.
the BUG is the instruction SERIAL_ECHOLN does not work with string pointers and there fore garbage is sent on the serial line.
The proposed correction is to use the right instruction: SERIAL_ECHORPGM that works with string pointers.
Therefore the correct message is MSG_SD_CANT_ENTER_SUBDIR and not the original listed.
2017-03-07 09:37:15 -05:00
