3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,807 Commits 3 Branches 78 Tags 40 MiB
7ff50e966d
Commit Graph

2162 Commits

Author SHA1 Message Date
Robert Pelnar
18dec75b56 MK2.5 - watchdog enabled + test (command "D-1") 2019-04-29 13:19:59 +02:00
NotaRobotexe
f16bea26e5 raise the Z axis before filament loading to nozzle on MMU2S 2019-04-25 17:39:09 +02:00
XPila
238079fc95
Merge pull request #1763 from mkbel/save_flash_timer2 
Do not compile timer02.c if not used. Saves 148B flash.
 2019-04-24 16:07:17 +02:00
mkbel
e8e7fa907f
Change comment 2019-04-24 15:52:24 +02:00
Robert Pelnar
1d8b2b3e18 Secondary language reserved space resized 2019-04-24 15:22:17 +02:00
Marek Bel
f25f8f1b71 Do not compile timer02.c if not used. Saves 148B flash. 2019-04-23 19:39:49 +02:00
mkbel
ca449ef517
Merge pull request #1742 from XPila/MK3-bed_pwm_revert 
Bed high frequency PWM disabled
 2019-04-16 21:04:28 +00:00
Marek Bel
75fac9dab2 Do not kill printer if External SPI flash W25X20CL is not responding. 
Remove internationalization macro for this message. It has no sense to be translated as internationalization in most cases doesn't work if it is not responding.
Show this message instead of splash screen if the error is encountered.
There is no additional delay or wait for click, as such functions doesn't work in setup function.
 2019-04-16 22:20:53 +02:00
Robert Pelnar
1f9737b4a6 Bed high frequency PWM disabled 2019-04-16 16:48:01 +02:00
PavelSindler
7168c09eec
Merge pull request #1713 from mkbel/fix_octoprint_mmu_load_failed 
Fix octoprint mmu load failed
 2019-04-10 18:21:06 +02:00
MRprusa3d
b5f196406e (preliminary) fix @ preHeatError II 2019-04-10 00:29:58 +02:00
Marek Bel
0d3e3c506a Merge remote-tracking branch 'prusa3d/MK3' into fix_octoprint_mmu_load_failed 2019-04-09 20:54:21 +02:00
Marek Bel
c7d403733a Allow load filament retry after button push unlimited times in case mmu_continue_loading() is in blocking mode. 2019-04-09 20:50:29 +02:00
Marek Bel
84cabd3836 Change busy_state type, save 340B of flash 2019-04-05 15:20:34 +02:00
Marek Bel
bf57a59147 Extract duplicate code into function. Saves 106B flash. 2019-04-05 15:12:35 +02:00
Marek Bel
4bfa3d7e0b Reporty busy: paused for user in case MMU is not responding. 2019-04-04 19:04:15 +02:00
Marek Bel
bf1a55ab02 Add mmu_continue_loading blocking variant and use it for usb printing, so that "ok" is not returned to the controller in case MMU load failed. 
Known limitation: MMU load failed is not handled properly if it happens again after user clicked printer button to continue print.
 2019-04-04 18:15:37 +02:00
MRprusa3d
aa0edd09f5 (preliminary) fix @ (bed) preHeatError 2019-04-03 22:48:58 +02:00
PavelSindler
fd96bde69f
Merge pull request #1667 from mkbel/Add_IR_sensor_fail_message 
Add ir sensor fail message
 2019-04-02 14:55:27 +02:00
PavelSindler
a8d8d9e4c9 version change 2019-04-01 20:52:24 +02:00
PavelSindler
c440ca7369
Revert "Phase correct PWM for bed, frequency 40KHz." 2019-04-01 18:44:13 +02:00
PavelSindler
ae11c1e26f rename function 2019-03-28 16:39:56 +01:00
PavelSindler
97594c83bb function misleading names changed 2019-03-28 14:58:58 +01:00
PavelSindler
96a111119b document 2019-03-28 14:52:50 +01:00
PavelSindler
8f69d5a501 document 2019-03-28 14:48:35 +01:00
PavelSindler
1dd486d86d max length of menu item strings added 2019-03-28 13:18:28 +01:00
PavelSindler
d22793f276 Z-probe nr. states reduced to 1; 3; 5 2019-03-28 12:02:46 +01:00
PavelSindler
02faadf0b9 MMU mode renamed 2019-03-28 09:49:08 +01:00
PavelSindler
e7900aeaa1 Merge remote-tracking branch 'upstream/MK3' into 7x7_polishing 2019-03-28 08:08:54 +01:00
PavelSindler
c1da07bda0
Merge pull request #1653 from XPila/MK3 
Phase correct PWM for bed, frequency 40KHz.
 2019-03-27 21:07:15 +01:00
PavelSindler
e259967991 remove / comment debug code 2019-03-27 20:41:45 +01:00
PavelSindler
5863297538 if deviation between current Z-probe and avg, value > 50um, enlarge Z-probe movements and repeat measurement 2019-03-27 20:25:00 +01:00
PavelSindler
a9ce38df71 Function for decision if we have valid Z-calibration data in eeprom fixed, mesh bed leveling: possible crash fix, temporaty debug info on serial line. 2019-03-26 17:14:05 +01:00
Marek Bel
baeee5817e Make lcd_selftest_error() calls safer, as nullptr parameter is not handled. It is hard to believe, but it actually saves 4B flash. 2019-03-22 00:24:22 +01:00
Marek Bel
966e772702 Fix compile error for non TMC2130 endstops check. 2019-03-22 00:14:29 +01:00
Marek Bel
89f1a3bacf Fix compile error for non TMC2130 pulley check. 2019-03-22 00:11:02 +01:00
Marek Bel
8582babddb Fix compile error for manual fan check. 2019-03-22 00:08:44 +01:00
Marek Bel
d1c5c03907 Fix compile error for manual fan check. 2019-03-22 00:03:14 +01:00
Marek Bel
c45a7f8641 Fix 1_75mm_MK3-EINSy10a-E3Dv6full variant build error. 2019-03-21 23:50:01 +01:00
Marek Bel
91779a5d04 Add filament sensor false triggering message. 2019-03-21 23:36:59 +01:00
Marek Bel
ba23b1b2c5 Remove unused. 2019-03-21 22:50:46 +01:00
Marek Bel
6c28ed6349 Convert lcd_selftest_error() first parameter to enum class. 2019-03-21 22:48:57 +01:00
PavelSindler
fbe68cb287 variables scope changed 2019-03-21 19:37:34 +01:00
PavelSindler
576bfb17c7 whitespace 2019-03-21 18:51:54 +01:00
PavelSindler
175f840d16 return statement not used (fixes Pronterface issues) 2019-03-21 18:46:07 +01:00
Harpalyke
0f21ccee3c Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S 2019-03-19 21:39:59 +00:00
Robert Pelnar
cfd185f315 Phase correct PWM for bed, frequency 40KHz. 2019-03-19 14:50:57 +01:00
Marek Bel
4100bd33a7 Fix Dcodes compilation errors and warnings. 2019-03-19 13:53:58 +01:00
PavelSindler
e37c2e0b2e version change 2019-03-15 20:01:02 +01:00
PavelSindler
7c5e9500a8 version change 2019-03-15 20:00:07 +01:00
PavelSindler
c05561d6b1
Merge pull request #1607 from PavelSindler/7x7 
7x7 mbl and switching mmu modes
 2019-03-15 19:55:15 +01:00
PavelSindler
0ca52216f3 Revert "variants update" 
This reverts commit c3a95ab79b.
 2019-03-15 13:14:32 +01:00
Marek Bel
ffe45bdef3 Disable mmu filament cutter feature. 2019-03-15 03:38:37 +01:00
PavelSindler
80ef2686ae mmu mode switching fix 2019-03-14 18:17:40 +01:00
PavelSindler
6e26f61726 fixed 7x7 mesh bed leveling vs. Z calibration check 2019-03-14 14:48:01 +01:00
PavelSindler
ef198856a4 increase relative movement in Z to work better with higher hysteresis PINDAs 2019-03-14 14:10:52 +01:00
PavelSindler
9e0e4198c5 Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update 2019-03-14 01:52:44 +01:00
PavelSindler
72f51989fa compare measured Z-value during mesh bed leveling with Z-calibration value even for 7x7 mesh 2019-03-13 19:41:09 +01:00
PavelSindler
32138ea09a menu item alignment 2019-03-13 15:08:09 +01:00
PavelSindler
6c70d59810 mbl settings initialization fix 2019-03-13 15:05:10 +01:00
PavelSindler
c3a95ab79b variants update 2019-03-12 11:57:35 +01:00
PavelSindler
b20d9171b6 Merge remote-tracking branch 'upstream/MK3' into 7x7 2019-03-12 11:47:17 +01:00
PavelSindler
42036270cf
Merge pull request #1619 from MRprusa3d/PFW-795d 
better autoLoad II
 2019-03-12 11:44:30 +01:00
PavelSindler
c55f42965d
Merge pull request #1601 from MRprusa3d/PFW-749 
SD card menu enhancement
 2019-03-12 11:42:53 +01:00
PavelSindler
c9cff11732
Merge pull request #1593 from MRprusa3d/PFW-647 
mode switching, G-code unification
 2019-03-12 11:40:43 +01:00
PavelSindler
4d2b155ff9
Merge pull request #1594 from mkbel/fix_change_filament 
Fix change filament
 2019-03-12 11:39:15 +01:00
PavelSindler
0aa21c362e compile error fix 2019-03-11 23:37:30 +01:00
PavelSindler
9a83925a97 fixed bug in counting approximate Z coordinate 2019-03-11 23:13:55 +01:00
MRprusa3d
3388444b6c better autoLoad II 
autoLoad inhibit if Support::ExtruderInfo(@MKx)/SensorInfo(@MKxS)-menu is selected
 2019-03-11 20:43:07 +01:00
PavelSindler
698f81abe0 fix compile error 2019-03-11 15:55:48 +01:00
PavelSindler
819a91ab1e switching stealth/normal mode for mmu in settings menu and tune menu 2019-03-11 12:33:22 +01:00
PavelSindler
141b78c048 number of Z-probes defualt value changed from 4 to 3, mmu stealth mode switch in settings menu 2019-03-10 16:03:46 +01:00
PavelSindler
091934462d menu correction 2019-03-08 20:06:30 +01:00
PavelSindler
315959c13a menu update 2019-03-08 20:03:23 +01:00
PavelSindler
952e0e1e77 change min. nProbeRetry to 1 2019-03-08 19:49:10 +01:00
PavelSindler
f293d61d3d faster Z probe: move Z 150um relatively to last measurement. If PINDA is triggered at the beginning of measurement, move Z 500um higher and repeat measurement 2019-03-08 18:52:14 +01:00
PavelSindler
6a864ffbab G80 parameters configurable via settings menu 2019-03-08 15:43:37 +01:00
PavelSindler
98bb2b7acf merge debug gcodes for bed analysis 2019-03-06 20:45:23 +01:00
PavelSindler
dccb6ca2c6 Merge remote-tracking branch 'upstream/MK3' into bed_analysis_gcodes2 2019-03-06 19:56:52 +01:00
PavelSindler
f0cc313fed debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified 2019-03-06 19:56:48 +01:00
PavelSindler
2a71dbefb8
Merge pull request #1597 from mkbel/fix_compiler__warning 
Fix compiler  warning
 2019-03-06 19:55:18 +01:00
MRprusa3d
6217329d50 SD card menu enhancement 2019-03-06 19:51:26 +01:00
PavelSindler
101453b674 mbl submenu 2019-03-06 13:27:31 +01:00
PavelSindler
5766a5537e limit number of probes 2019-03-05 22:43:44 +01:00
PavelSindler
7c187541e1 function for valid points determination improved; simple Z-coordinate estimation; measure all points and use inaccurate Z-coordinate in case that we don't have enought information for counting Z-coordinate estimation 2019-03-05 22:36:30 +01:00
PavelSindler
d9e93e8a77 measurements points moved 10mm to the left; measure only chosen points (e.g. not points affected by magnets proximity) 2019-03-05 20:40:08 +01:00
Marek Bel
1eab058ad4 Fix uninitialized variable used. 2019-03-05 18:08:35 +01:00
Marek Bel
7fcecabd5f Fix compiler warning: variable 'previous_millis_cmd' set but not used 2019-03-05 18:04:58 +01:00
Marek Bel
484259cbb2 Fix compiler warning: 'lcd_settings_linearity_correction_menu_save' defined but not used 2019-03-05 18:00:16 +01:00
Marek Bel
28f1e309a2 Fix compiler warning: 'old_x_max_endstop' defined but not used 
Fix compiler warning: 'old_y_max_endstop' defined but not used
 2019-03-05 17:44:47 +01:00
Marek Bel
7bcd54f8ba Add missing function prototype. 2019-03-05 17:30:27 +01:00
Marek Bel
ebfd4b2f47 Fix compiler warning: unused parameter 'calib' 2019-03-05 17:02:57 +01:00
Marek Bel
790ae9f0ce Fix compiler warning: unused parameter 'pstep'. 2019-03-05 16:41:41 +01:00
Marek Bel
5b9e7c4fe7 Fix warning: assignment makes pointer from integer without a cast. 2019-03-05 16:27:47 +01:00
PavelSindler
f1031d2302 new farm statuses for pause (14) and wait for user (15) 2019-03-05 16:00:50 +01:00
Marek Bel
23859921b9 Fix compiler warnings macro redefined. 2019-03-05 15:56:20 +01:00
MRprusa3d
20a03d703d G-code unification 
"FSENSOR_RECOVER" ->-> "PRUSA fsensor_recover"
 2019-03-05 13:36:13 +01:00
Marek Bel
f161d3ade4 Change formatting. 2019-03-04 22:17:43 +01:00
Marek Bel
b2255c8be9 Preheat nozzle before loading filament in M600 (change filament) gcode. 
This fixes problem of not heating the nozzle when retrying load after MMU load failed.
 2019-03-04 22:00:24 +01:00
MRprusa3d
7e48d633cb mode switching 
info-message viewing during mode switching
 2019-03-04 21:30:36 +01:00