3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,081 Commits 3 Branches 78 Tags 40 MiB
82af3f1a93
Commit Graph

822 Commits

Author SHA1 Message Date
Robert Pelnar
73b0349898 fix - Z movement speed in selftest 
conditional translation for linearity correction and variable resolution
 2018-02-23 16:31:24 +01:00
XPila
af5cfe76b5
Merge pull request #495 from XPila/MK3-accurate_homming 
Accurate homing, fix - enabled after selftest.
 2018-02-22 20:54:08 +01:00
Robert Pelnar
06da2bb915 Accurate homing, fix - enabled after selftest. 
Experimantal menu - conditional translation.
 2018-02-22 20:50:34 +01:00
PavelSindler
ae50a1a768 checking fan speed synchronized with block currently processed 2018-02-22 17:12:24 +01:00
Robert Pelnar
49832d4d3b Safety timer (disable heaters after 15min idle) 2018-02-22 16:46:17 +01:00
bubnikv
cff7b9b396 Unified the volumetric_multiplier with extrusion_multiply to improve 
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.

Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
 2018-02-22 14:53:10 +01:00
bubnikv
4e3ea41ba4 Fix of a loss in precission when the extruder multiplier is set 
with M221. For 50um layers, the precision loss leads to holes
in the print.
 2018-02-22 14:52:36 +01:00
PavelSindler
d020f48791
Merge pull request #485 from bubnikv/M221_fix 
Unified the volumetric_multiplier with extrusion_multiply to improve
 2018-02-22 14:17:09 +01:00
PavelSindler
03a1bef4ee
Merge pull request #489 from PavelSindler/xyz_corrections_3 
typo fixed
 2018-02-22 13:41:22 +01:00
PavelSindler
819f2fd2b3 typo fixed 2018-02-22 13:40:31 +01:00
XPila
30bb84a7a7
Merge pull request #487 from PavelSindler/eeprom_printer_versions 
Eeprom hw versions
 2018-02-22 11:48:26 +01:00
XPila
ad33d3efd1
Merge pull request #488 from PavelSindler/xyz_corrections_3 
Xyz corrections
 2018-02-22 11:48:06 +01:00
PavelSindler
edc6366df2
Merge pull request #479 from PavelSindler/z_cal_fix 
x_max_pos correction
 2018-02-22 10:47:24 +01:00
PavelSindler
7a31fc5b6e
Merge pull request #486 from XPila/MK25 
Pinout, conditional translation and variant file for MK2
 2018-02-22 10:45:56 +01:00
PavelSindler
90e00b56a5 some defines moved to another position 2018-02-22 10:42:02 +01:00
PavelSindler
a4b3389dfa M45 verbosity, steel sheet define, minor modifications in xyz cal 2018-02-22 10:38:46 +01:00
PavelSindler
0fb471f528 whitespace 2018-02-22 00:11:17 +01:00
PavelSindler
0323af531d printer types and motherboard types added to eeprom; min extrude temp lowered because of woodfil 2018-02-22 00:09:12 +01:00
Robert Pelnar
c5175e97ec Pinout, conditional translation and variant file for MK2 2018-02-21 15:19:34 +01:00
bubnikv
ba49c21f17 Unified the volumetric_multiplier with extrusion_multiply to improve 
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.

Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
 2018-02-21 11:25:21 +01:00
XPila
74e6ff67d3
Merge pull request #482 from bubnikv/M221_fix 
M221 fix
 2018-02-20 19:10:07 +01:00
Robert Pelnar
66161062cf Homing accuracy calibration in selftest. 2018-02-20 19:02:55 +01:00
Robert Pelnar
e2e48bfd71 SD speed test (DEBUG) 
homeaxis - fix set_destination_to_current
 2018-02-20 18:50:20 +01:00
Robert Pelnar
d91dbc73c9 tmc2130 - optimalization, removed unused code 2018-02-20 17:06:37 +01:00
bubnikv
ee5949c56e Fix of a loss in precission when the extruder multiplier is set 
with M221. For 50um layers, the precision loss leads to holes
in the print.
 2018-02-20 15:30:18 +01:00
bubnikv
403ed26d47 Merge remote-tracking branch 'remotes/upstream/MK3' into MK3 2018-02-20 15:21:44 +01:00
PavelSindler
43b8b125bc calibration points/offset corrections 2018-02-19 11:38:52 +01:00
PavelSindler
4457961d40 x_max_pos 2018-02-19 01:03:13 +01:00
Robert Pelnar
dff8c29362 Microstep linearity correction, optimized wave compression. 
Correction factor can be adjusted from 0.9 to 1.25 by 0.005 steps.
 2018-02-17 19:58:40 +01:00
Robert Pelnar
57499dc6a0 M350 for E axis (8, 16, 32, 64, 128 microsteps) 2018-02-15 15:40:49 +01:00
bubnikv
dd2468d306 Avoid the stepper interrupt being missed by extending the tick time 
beyond the current time. This is a trick borrwed from upstream Marlin.

In debug mode, watch for the missed stepper interrupt ticks where the interrupts
are missed by more than 20% of the 10kHz stepper interrupt repeat rate,
and show the statistics (number of missed ticks and by how many micro
seconds was the interrupt missed, and what was the maximum missed
interrupt delay) on the display and send it to the serial line.
 2018-02-15 11:44:19 +01:00
Robert Pelnar
79caf3d9c6 tmc2130 optimalization, accurate homing and microstep linearity correction 
dcode D12 removed (no longer needed)
homeaxis optimized + xy home calibration support
new eeprom variables
new lcd menu edit types (byte3, mres, wfac), new menu "Experimental"
currents adjusted
 2018-02-15 04:17:58 +01:00
PavelSindler
08c59419da
Merge pull request #468 from PavelSindler/M600_currents 
M600 unload current
 2018-02-12 09:41:13 +01:00
Robert Pelnar
081b3852fc Menu - encoder position stack 2018-02-09 20:26:42 +01:00
Robert Pelnar
31e6271b2c Voltage measurement - conditional translation 2018-02-08 21:07:17 +01:00
Robert Pelnar
b08636c554 fix - conditional translation for DEBUG build 2018-02-08 18:56:15 +01:00
PavelSindler
80f353e8ff Z_MAX_POS 2018-02-08 16:52:05 +01:00
PavelSindler
a719ae1b01 whitespace 2018-02-08 16:33:43 +01:00
PavelSindler
ebe1c10423 lower current for unload 2018-02-08 16:32:27 +01:00
PavelSindler
9c4ce3623d M600 unload current 2018-02-08 16:11:51 +01:00
PavelSindler
29978c4126 TACH_1 must be defined to enable print fan error 2018-02-07 11:10:04 +01:00
PavelSindler
b202f2b297 version changed 2018-02-06 17:04:35 +01:00
PavelSindler
0c98ec5f6b selftest, max endstops undefined, initialization of extruder fan, y offset from extruder 2018-02-06 17:01:09 +01:00
PavelSindler
abf956b86f init 2018-02-06 09:19:27 +01:00
PavelSindler
df754a322b MK25 merge Xpila's changes 2018-02-06 08:33:26 +01:00
PavelSindler
33aa3d5e7d commint nr 2018-02-05 16:56:31 +01:00
PavelSindler
3bd892135a erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used 2018-02-05 16:49:06 +01:00
bubnikv
2babbb3b11 Enabled linear advance. 2018-02-02 22:56:13 +01:00
bubnikv
9acd41a942 Reworked the stepper routine: 
1) The computational load is spread more evenly along the stepper ISR
ticks by moving some of the timer and linear advance calculation from
the block initialization into the 1st tick of the steady phase
of the trapezoid.

2) Reworked planning of the Linear Advance ISR ticks to fit
the time slot allocated for the main stepper ISR tick. This is achieved
by grouping the Linear Advance extruder ticks by a power of two to tick
the Linear Advance interrupts at a maximum 7kHz. Also some
of the extruder ticks are performed just after the XYZ ticks
and if the remaining time slot for the Linear Advance ticks is too short,
all the Linear Advance steps are ticked inside the main stepper ISR invocation.

3) Added some calls to MSerial.checkRx() if the stepper ISR routine
is delayed for too long by the additional LinearAdvance ticks.

This implementation differs significantly from the original implementation
by @Sebastianv650, as this implementation tries to follow the exact
timing of the XYZ axes with the drawback of possibly ticking the extruder
faster than it could handle, while the original implementation
by @Sebastianv650 ticks the extruder slower with the drawback of possibly
spreading the XYZ ticks, thus introducing jerk in the cartesian movement.
 2018-02-02 22:55:50 +01:00
bubnikv
9652cf2d5b Merge branch 'MK3' into MK3_fast_dbg 2018-02-02 20:51:57 +01:00
bubnikv
9379430f8c A bit of documentation. 2018-02-02 20:45:45 +01:00
bubnikv
c2950b01a6 Added macros for outputting serial data onto the logical analyzer line 
at 2 megabaud, 9bits, 1 stop bit. At this high rate the serial output
takes next to no time, so it does not slow down the debugged firmware
too much, and the data is nicely aligned with the other debug signals
on the logical analyzer screen.
 2018-02-02 20:42:09 +01:00
bubnikv
3b312a42f8 Adjusted the features for the debug buid: 
Removed DEBUG_DISABLE_STARTMSGS. This macro defeats the purpose
of the build server and the build messages of the non-release builds.

Removed DEBUG_DUMP_TO_2ND_SERIAL for performance reasons.
 2018-02-02 20:37:03 +01:00
bubnikv
485355274e Optimized the MarlinSerial class by declaring all methods static. 
The MarlinSerial defines no member variable, though the AVR GCC
stored a "this" pointer onto stack when calling the non-static
methods anyway.
 2018-02-02 20:25:19 +01:00
PavelSindler
36536044f4 version changed 2018-02-02 17:48:02 +01:00
Robert Pelnar
4d8807e924 bugfix - failstats (total counters) reset to zero for empty eeprom (0xff) 2018-02-02 15:59:37 +01:00
PavelSindler
2dd2c971e2 whitespace 2018-02-01 20:25:19 +01:00
PavelSindler
84f7d057f3 fw version check: FW_VERSION string is case insensitive (parsing RC works) 2018-02-01 20:23:45 +01:00
Robert Pelnar
8216b7777f hex files for MK2.5 and MK3 
Configuration_prusa.h for MK2.5
 2018-02-01 20:15:15 +01:00
Robert Pelnar
8562235440 MK2.5 port - compilable version 2018-02-01 20:08:11 +01:00
PavelSindler
d92f6292aa unload with lowered current 2018-02-01 17:43:03 +01:00
Robert Pelnar
f40b8a2186 MK3 configuration files, renamed EINY to EINSY 2018-02-01 17:10:41 +01:00
Robert Pelnar
f46d36a1d4 removed unused files (pins, variants) 2018-02-01 16:39:56 +01:00
PavelSindler
a256a8ff19
Merge pull request #450 from XPila/3.1.1-RC6 
filament sensor additional check after runout (3mm back, 3mm forward …
 2018-02-01 12:20:59 +01:00
Robert Pelnar
e20ee149b0 filament sensor additional check after runout (3mm back, 3mm forward @200mm/min) 2018-01-31 21:10:41 +01:00
PavelSindler
9d8191323b
Merge pull request #440 from XPila/3.1.1-RC6 
Extruder stealthChop and constant-off-time mode.
 2018-01-31 20:21:02 +01:00
XPila
822dd8ff9c
Merge pull request #448 from PavelSindler/eeprom_versions 
EEPROM version change: inform user on LCD that default settings were loaded
 2018-01-31 20:06:19 +01:00
XPila
beb3a507d3
Merge pull request #441 from PavelSindler/send_OK 
PID cal. is not sending OK periodically, print fan error pauses print…
 2018-01-31 20:03:08 +01:00
Robert Pelnar
adc69eda18 PINDA temp. calibration warning messages. 2018-01-31 17:03:33 +01:00
Robert Pelnar
1a01282e33 cardreader - new member "paused" 
tmc2130 - decreased crash sensitivity for Y
 2018-01-31 15:20:27 +01:00
Robert Pelnar
4c5618c371 failstats - reset "last print" counters 
card - new member variable "paused" (bool)
 2018-01-31 15:09:36 +01:00
Robert Pelnar
daaac2fb88 fail stats 2018-01-30 19:49:40 +01:00
Robert Pelnar
210b97d16d New fail stats (global, last print), crashdetection X and Y separated 2018-01-30 13:10:36 +01:00
PavelSindler
88f248cb77 Inform user that hardcoded default settings were loaded (EEPROM version change) 2018-01-30 11:31:44 +01:00
PavelSindler
cbcfcee48f PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu 2018-01-25 15:23:11 +01:00
Robert Pelnar
39bd5c3a1d Extruder stealthChop and constant-off-time mode. 
Extruder different chopper frequency in spreadcycle.
Dcodes (fix)
 2018-01-25 05:13:21 +01:00
TheZeroBeast
f4073120ef -m Added Encoder Fix changes 2018-01-25 06:49:28 +10:00
Robert Pelnar
cae68d9f6d Extruder resolution changed to 32usteps 
build 151
 2018-01-24 01:41:42 +01:00
XPila
556205d993
Merge pull request #432 from PavelSindler/invalid_gcodes 
invalid / unknown gcodes reported on serial
 2018-01-24 00:12:47 +01:00
XPila
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume 
SD card long pause update
 2018-01-24 00:12:33 +01:00
XPila
110ab8b2f6
Merge pull request #426 from PavelSindler/temperatures_update 
Preheat temperatures update
 2018-01-24 00:11:59 +01:00
XPila
b2ba72ffcd
Merge pull request #411 from PavelSindler/typo_fixed 
typo fixed
 2018-01-24 00:10:28 +01:00
XPila
777dcf072b
Merge pull request #430 from bubnikv/MK3_fsensor_fullrate 
Optimization of the filament sensor.
 2018-01-24 00:10:00 +01:00
PavelSindler
70ff22571f minor change 2018-01-23 20:04:18 +01:00
PavelSindler
3adedb558b invalid / unknown codes reported on serial 2018-01-23 20:01:02 +01:00
PavelSindler
64a709c097 removed temporary debuging code 2018-01-23 19:14:52 +01:00
PavelSindler
05e0abbd9d startFileprint delayed 2018-01-23 19:11:04 +01:00
bubnikv
44dc12005f Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
PavelSindler
c38458eb67 init 2018-01-23 16:21:43 +01:00
XPila
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking 
Mk3 stepper blocking
 2018-01-23 13:15:59 +01:00
bubnikv
69f97e0ec3 Separated the "Unknown" build from the "Development" build. 
Documented purpose of the various build types.
 2018-01-22 17:41:05 +01:00
PavelSindler
188116cb7e Preheat temperatures update 2018-01-22 16:03:43 +01:00
bubnikv
160cdccae1 Merge remote-tracking branch 'remotes/origin/MK3_stepper_blocking' into MK3_fast_dbg 2018-01-20 17:31:26 +01:00
bubnikv
3efd90a9ea Merge branch 'MK3_stepper_lowres' into MK3_fast_dbg 2018-01-20 17:27:58 +01:00
bubnikv
5deee8f42c Merge remote-tracking branch 'remotes/upstream/MK3' into MK3_stepper_lowres 2018-01-20 17:24:12 +01:00
bubnikv
a94e266cf1 Documented CPU load and frequency of the following interrupts: 
9.  ISR(INT7_vect) 			- Fan signal interrupt
26. ISR(M_USARTx_RX_vect)	- USB to serial RX
37. ISR(USART1_RX_vect)		- R-PI serial RX
 2018-01-20 16:20:51 +01:00
bubnikv
815dfcb14b Implemented a stepper timer reset after a long blocking cli() 
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
 2018-01-20 15:39:21 +01:00
bubnikv
17a8e2db01 Documented the interrupt blocking by a main thread by its maximum time. 
Added a debug output to serial line on stepper timer overflow.
 2018-01-20 14:58:30 +01:00
bubnikv
9e534c1990 Minimize risk of stepper routine interrupt blocking by reorganizing 
the routine to move the G-code line length from the command queue
to the planner queue.
 2018-01-20 14:37:22 +01:00
bubnikv
7edce0b890 Only show the debug menu in the DEBUG_BUILD. 2018-01-18 16:43:40 +01:00
bubnikv
330f1576fc Support for debug builds: 
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
 2018-01-18 16:24:25 +01:00
PavelSindler
b5f8b1d97c
Merge pull request #412 from PavelSindler/debug_version 
initial message for debugging fw version
 2018-01-18 13:18:16 +01:00
PavelSindler
e60cb2a79e unload filament sequence same as in M600 2018-01-17 21:54:34 +01:00
PavelSindler
4843f2c48e initial message not shown on release candidate versions 2018-01-17 17:38:34 +01:00
PavelSindler
bfa675c1a4 initial message for debugging fw version 2018-01-17 16:00:19 +01:00
PavelSindler
b73520bcea successfull -> successful 2018-01-17 14:40:37 +01:00
Robert Pelnar
36e4e39c85 3.1.1-RC5 build 148 2018-01-16 19:25:09 +01:00
XPila
515420ce06
Merge pull request #407 from PavelSindler/MK3_for_merging 
maiden eeprom: tmc2130_mode is set to normal
 2018-01-16 17:10:38 +01:00
Robert Pelnar
c2710fea63 crashdetection limits changed (X=48, Y=64) 2018-01-16 17:04:21 +01:00
PavelSindler
fbf947b75c maiden eeprom: tmc2130_mode is set to normal 2018-01-16 16:56:58 +01:00
Robert Pelnar
6b5f9253d6 build 147 2018-01-16 16:50:05 +01:00
XPila
026f68fd6f
Merge pull request #404 from PavelSindler/xyz_fixes 
xyz homing hotfix, xyz cal. status changed
 2018-01-16 01:39:57 +01:00
XPila
9efa1d3a03
Merge pull request #403 from PavelSindler/M600_update 
timeout fix and unload message shortened
 2018-01-16 01:39:18 +01:00
Robert Pelnar
f30da4bbca babystep synchronisation 2018-01-16 01:34:44 +01:00
PavelSindler
06c6cc119b xyz homing hotfix, xyz cal. status changed 2018-01-16 01:00:09 +01:00
PavelSindler
d8117eab66 timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened 2018-01-15 17:39:42 +01:00
Robert Pelnar
981a681e52 Temperature ISR synchronization, M600 - faster unload 2018-01-15 17:29:07 +01:00
XPila
9d52d017df
Merge pull request #401 from PavelSindler/rx_buffer 
get command update
 2018-01-15 15:28:19 +01:00
XPila
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update 
M600 update
 2018-01-15 15:27:41 +01:00
Robert Pelnar
aaf4e0a5e0 fixed bug - fsensor synchronization (b146) 2018-01-15 15:23:06 +01:00
PavelSindler
1d3f6e8be5 flush rx buffer in case that it was full 2018-01-15 12:18:21 +01:00
bubnikv
1eac2b4ccb Fixed a regression error from the last commit regarding Z homing. 
Removed unused Z_LATE_ENABLE symbol.
 2018-01-15 12:00:28 +01:00
PavelSindler
9e7686b77f unload changes reverted back 2018-01-15 11:35:49 +01:00
PavelSindler
c36af887b7 M600 has timeout for nozzle, different procedure for unload 2018-01-15 11:30:28 +01:00
Robert Pelnar
9aedaa8fe7 build 146 
hard limits
fsensor overflow fix
 2018-01-14 23:59:43 +01:00
bubnikv
7a972fd9b0 Split the stepper ISR routine into multiple inline functions, 
added an optimized DDA routine for moves with less than 32767 ticks.
 2018-01-14 22:37:07 +01:00
PavelSindler
3201fd1538 removed duplicit comment 2018-01-14 19:36:30 +01:00
bubnikv
30b06488ca Redefined the DDA step and accumulator values to unions to support 
access to the low / high words of the 32bit values.
This is a prerequisity for an optimized 16bit only DDA
in case the number of step is lower than 32767.
 2018-01-14 17:01:04 +01:00
bubnikv
a1fd50ea9a Simlified the extruder ticking code. 2018-01-14 14:45:27 +01:00
Robert Pelnar
552b1f03b1 build 145 
fixed - finishstatus declaration
 2018-01-13 19:16:09 +01:00
XPila
78d6088d48
Merge pull request #392 from PavelSindler/fail_stats 
filament fails counter fix
 2018-01-12 22:23:18 +01:00
PavelSindler
8bd84ba4fd
Merge pull request #396 from XPila/MK3 
Mk3
 2018-01-12 22:08:50 +01:00
bubnikv
5ed9233abc Missed a bit with the last commit. 2018-01-12 22:01:53 +01:00
Robert Pelnar
530dfba417 Status message limit (PFW-124) 2018-01-12 21:21:21 +01:00
bubnikv
82304a2268 Slight optimization of the fan speed interrupt routine by accessing 
the Arduino millis() without locking interrupts.
 2018-01-12 21:16:29 +01:00
Robert Pelnar
ebf6d08fae Crash detection - message on lcd (PFW-115) 2018-01-12 21:02:49 +01:00
bubnikv
135dda1bff Slight optimization of the stepper timer routine. 
Use WRITE_NC instead of WRITE for writing into the slow ports.
 2018-01-12 21:01:01 +01:00
bubnikv
3e6d853364 Debugging of the stepper timer routine. When enabled through 
DEBUG_STEPPER_TIMER_MISSED, the printer is halted on stepper timer overflow
and an error message is displayed.
 2018-01-12 20:51:14 +01:00
PavelSindler
23b78da2f5 filament fails counter fixed 2018-01-12 20:21:07 +01:00
bubnikv
26747d7236 Definition of 8 pins on the Einsy 0.4 board connected to pin headers 
to be monitored by an 8 channel logic analyzer, for example the Saleae.
 2018-01-12 20:18:20 +01:00
bubnikv
db985065ff WRITE_NC macro for non-critical (non-synchronized) access to 
slow ports. The WRITE macro stores the CPU bits on the stack first,
then locks the interupts, reads the port, sets a bit, writes the port
and then finally reverts the CPU bits. The WRITE_NC does not lock
the interrupts, therefore it may only be used where it cannot
be interrupted.
 2018-01-12 20:15:59 +01:00
PavelSindler
1fbed53200 initial 2018-01-12 20:01:22 +01:00
Robert Pelnar
0f46fa0c37 blocking messages in settings/tune menu (PFW104) 
switch normal/stealth (PFW110)
 2018-01-12 19:54:32 +01:00
PavelSindler
a4be2af538 commit nr updated 2018-01-11 17:51:30 +01:00
PavelSindler
f5ed12817d
Merge pull request #388 from PavelSindler/first_layer_saving 
Live adjust Z saving using timeout
 2018-01-11 17:49:40 +01:00
PavelSindler
5c1db284b0 remove setting live adjust status in setup function 2018-01-11 17:48:58 +01:00
PavelSindler
97bd56d560
Merge pull request #386 from PavelSindler/selftest_swapped_fans 
manual check for swapped fans
 2018-01-11 17:45:23 +01:00
bubnikv
cfae8f859d
Merge branch 'MK3' into fw_versions 2018-01-11 16:58:47 +01:00
PavelSindler
087532085f development fw versions has initial message for warning 2018-01-11 15:50:26 +01:00
PavelSindler
cc20da62a8 whitespace 2018-01-10 23:31:06 +01:00
PavelSindler
c185b46eb2 live adjust Z saving using timeout 2018-01-10 23:28:41 +01:00
Robert Pelnar
0d269261e4 PFW-110 - load filament - beep when loading finished. 2018-01-10 18:50:16 +01:00
PavelSindler
c79d960cb5 manual check for swapped fans 2018-01-10 16:40:06 +01:00
XPila
6ff7641d97
Merge pull request #385 from XPila/MK3 
Build 143f
 2018-01-09 20:01:56 +01:00
Robert Pelnar
43010b30b4 Build 143f 
Crashdetection improoved, blocking temperature ISR fixed, limits for silent mode adjusted.
 2018-01-09 19:54:07 +01:00
PavelSindler
858945d949 thermal runaway: reset cmd queue to ensure that heater/bed temp will be always set to zero 2018-01-09 13:35:12 +01:00
PavelSindler
75efc71527 temp runaway for heatbed enabled in config 2018-01-08 16:15:50 +01:00
PavelSindler
b53197fdd1 Fixed error messages for print fan and extruder fan (were swapped) 2018-01-08 12:07:45 +01:00
Robert Pelnar
0a2087c1cb build 143e 
Linear advance disabled
Max feedrate reduced to 200mm/s
Silent max accel reduced to 984mm/s^2
some debug logs removed, tmc_init - log message fixed
 2018-01-04 18:08:22 +01:00
Robert Pelnar
8a5ba89a9c Missing serial characters debuging 
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
 2018-01-02 20:55:33 +01:00
Robert Pelnar
c6e77f55f6 checkrx in stepper returned back 
build 143a
 2017-12-30 02:55:22 +01:00
Robert Pelnar
568f03c46e build 143 2017-12-29 23:49:11 +01:00
Michal Průša
8d1f2afbf2 build number change 
just 141r -> 142
 2017-12-29 20:22:45 +01:00
Michal Průša
0920b62d80 build number change 2017-12-29 20:21:06 +01:00
Michal Průša
734639c1da Unload filament tweak 
unload filament now has longer and faster slow retract.
 2017-12-29 17:53:12 +01:00
Phil Dubach
7fb1234855 Turn off bed heater after temp calibration 
After finishing the temperature calibration, turn off the bed heater
right away, before waiting for the user to acknowledge completion.
 2017-12-28 23:47:27 -08:00
Robert Pelnar
e3c006dbe9 Serial communication uses port0 or port1, not both, removed some suspected code. 
build 141
 2017-12-29 00:06:47 +01:00
Michal Průša
f71f133e80 power panic polished 
Retraction set correctly to have minimum missing line
Z motor current not lowered that drascialy
Extruder motor turning off instantly
Beeping added to the end
 2017-12-28 23:26:06 +01:00
Michal Průša
f1c741d027 Filament autoloading improved and minor tweaks 
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)

Autoloading now unable to turn on when filament sensor is turned off or not responding

Color not right changed to color not correct to avoid slight confusion
 2017-12-28 18:59:57 +01:00
Michal Průša
26255766f6 Translation fix 
on -> zap
off -> vyp
 2017-12-28 15:55:16 +01:00
Michal Průša
5e5588c72c Text grooming 
Added language mutations of error messages, menu items.
Synced wording of crash detection in messages.
rPi port -> RPi port.
Minor menu items alignment.
 2017-12-28 15:45:52 +01:00
Robert Pelnar
bd58718d9d dummy "ok" response 
build 139 (RC4)
 2017-12-28 02:45:05 +01:00
Robert Pelnar
e064133a04 Merge remote-tracking branch 'upstream/MK3' into MK3 
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
 2017-12-28 01:37:13 +01:00
Robert Pelnar
69d496e157 autoload filament menu (PFW-95, PFW-96) 2017-12-27 21:57:51 +01:00
Robert Pelnar
cbd7f033e8 crashdetection and mode menu (PFW-85, PFW-97) 2017-12-27 21:43:04 +01:00
Robert Pelnar
546314fda7 Removed debug messages from serial comunication (octoprint...). 
build 137b
 2017-12-27 20:29:24 +01:00
Robert Pelnar
f9d5619682 MINTEMP safety for ambient temperature < 18C 
Silent mode acceleration limit lowered to 1000mm/s^2
 2017-12-27 18:20:04 +01:00
Robert Pelnar
a09dee7aea build 138 (RC3) 2017-12-23 03:44:47 +01:00
Robert Pelnar
23ed33fc21 disable crashdetection while usb printing 2017-12-23 03:42:19 +01:00
Robert Pelnar
8739b4a610 MINTEMP fix 2017-12-23 03:36:08 +01:00
Robert Pelnar
1a69c979bf Increase Z current (PFW-90). 2017-12-23 01:01:57 +01:00
PavelSindler
8f7a50cfcd
Merge pull request #343 from PavelSindler/m110_fix 
M110 fix
 2017-12-23 00:04:11 +01:00
PavelSindler
e8477b525c initial version of M110 fix (port from MK2) 2017-12-22 22:34:57 +01:00
XPila
257b8e9f59
Merge pull request #342 from XPila/MK3 
Mk3 - RC3
 2017-12-22 20:35:15 +01:00
Robert Pelnar
c4b045083c Extrude mintemp increased to 190C 2017-12-22 20:34:24 +01:00
Robert Pelnar
7f05b9fd44 changed menu order (PFW 91) 2017-12-22 20:31:45 +01:00
Robert Pelnar
6abba7bfe9 filament autoload - better detection algorithm, autoload in M600 from menu 
unload menu always visible
 2017-12-22 20:14:26 +01:00
PavelSindler
7114772784 whitespace 2017-12-22 19:23:11 +01:00
PavelSindler
3aca1271ed serial resend request always contains OK 2017-12-22 18:54:55 +01:00
PavelSindler
6f7a2ba263
Merge pull request #340 from PavelSindler/MK3_for_merging 
removed some serial line error messages
 2017-12-22 13:35:33 +01:00
PavelSindler
1917b6a1d7 removed some serial line error messages which caused that octoprint changed status 2017-12-22 13:27:04 +01:00
PavelSindler
33d715616f
Merge pull request #339 from PavelSindler/MK3_for_merging 
setup function
 2017-12-21 13:42:22 +01:00
PavelSindler
71bb4022dc setup function 2017-12-21 13:40:16 +01:00
Robert Pelnar
3ddbac6056 LCD_PWM removed (will be solved other way) 2017-12-21 01:00:49 +01:00
PavelSindler
f227952c0b
Merge branch 'MK3' into MK3 2017-12-21 00:07:01 +01:00
PavelSindler
b8fd058749 selftest fix 2017-12-21 00:03:41 +01:00
PavelSindler
17d9bb205a selftest tests filament sensor, selftest messages have language variants 2017-12-20 23:40:18 +01:00
Robert Pelnar
eba2924fdd Remove load/unload menu when autoload enabled 2017-12-20 22:55:11 +01:00
Robert Pelnar
a3a0e70eeb Fsensor autoload enabled menu and eeprom variable 2017-12-20 22:29:41 +01:00
Robert Pelnar
c88938e813 Fixed blocked lcd buttons 
build = 137y
 2017-12-20 21:33:07 +01:00
Robert Pelnar
25dd6dd673 new module adc (analog2digital) 
temperature.cpp - adc sampling state machine removed
new dcode D9 (adc read/write + simulator)
temporarily DEBUG_DISABLE_STARTMSGS because UI blocked
SILENT_MAX_FEEDRATE reduced to 172mm/s
hexfile removed
build number 137x
 2017-12-20 13:42:20 +01:00
PavelSindler
a9d5af4a07 Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update 2017-12-20 13:33:45 +01:00
PavelSindler
525d022841 whitespace 2017-12-18 19:17:39 +01:00
PavelSindler
31add2e69f removed 4 bytes from maiden eeprom check as these could be set earlier to 0 by lcd_status_screen function 2017-12-18 19:15:36 +01:00
XPila
9639b58f4d
Merge pull request #329 from XPila/MK3 
Meassuring voltages (pwr, bed), voltages menu
 2017-12-15 18:42:59 +01:00
Robert Pelnar
01654e7145 Meassuring voltages (pwr, bed), voltages menu 2017-12-15 18:33:35 +01:00
PavelSindler
ecbb5cf54b selftest fix 2017-12-15 17:54:52 +01:00
XPila
dd1eddb1cb
Merge pull request #327 from XPila/MK3 
Removed SG software homming
 2017-12-15 14:13:00 +01:00
Robert Pelnar
c6e10fb903 Removed SG software homming 
After Calibration Z enabled minstop (SG and PINDA)
TMC2130 code simplification
 2017-12-15 14:10:20 +01:00
PavelSindler
3c95bea693 threshold changed 2017-12-15 14:07:12 +01:00
PavelSindler
5daf53f35b version changed 2017-12-15 11:55:37 +01:00
PavelSindler
893f34fd85 watchdog reset 2017-12-14 20:28:07 +01:00
PavelSindler
011ebb3675 selftest is checking if fans are swapped, host keepalive messages added 2017-12-14 19:36:32 +01:00
Robert Pelnar
7304579ca5 build 135 2017-12-13 23:19:51 +01:00
Robert Pelnar
ca55cf74e2 Merge remote-tracking branch 'upstream/MK3' into MK3 
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
 2017-12-13 22:58:34 +01:00
Robert Pelnar
66e279b41c Autoload filament - fsensor error couter reset when switched. 2017-12-13 18:12:05 +01:00
Robert Pelnar
356bc403b1 Automatic filament load when printer idle and preheated 2017-12-13 17:39:32 +01:00
Robert Pelnar
cdeb835b5d Failstat couters initialization 
build number = 131
 2017-12-12 23:37:31 +01:00
XPila
bbd8dc3191
Merge pull request #315 from XPila/MK3 
new ambient thermistor table
 2017-12-12 22:51:02 +01:00
Robert Pelnar
7e00248060 new ambient thermistor table 
MINTEMP_MINAMBIENT
 2017-12-12 22:49:47 +01:00
PavelSindler
00a029ac7f bed maxtemp = 125 2017-12-12 21:28:14 +01:00
PavelSindler
fde0efc75c power panic for absolute E coordinates: initial version 2017-12-12 21:20:59 +01:00
PavelSindler
c1416cbb33
Merge pull request #312 from PavelSindler/wizard 
Wizard: force high power mode during xyz cal. and selftest; wizard for assembled printer
 2017-12-12 20:24:15 +01:00
PavelSindler
82dffb688a force high power mode during xyz cal. and selftest 2017-12-12 20:21:09 +01:00
PavelSindler
997c8de161 shipping prep. reset sets wizard flag, shipping prep wizard improvements 2017-12-12 19:17:37 +01:00
PavelSindler
5b314d0829 second serial active address in eeprom redefined 2017-12-12 17:18:06 +01:00
PavelSindler
f8e3c76315 merging new changes from upstream/MK3 2017-12-12 17:14:48 +01:00
XPila
86418eed2d
Merge pull request #311 from XPila/MK3 
Ambient thermistor - new table (PFW-71)
 2017-12-12 15:46:16 +01:00
Robert Pelnar
0271da3c67 Ambient thermistor - new table (PFW-71) 
Crashdetection disable durring print (PI3M3-42)
Stealth mode - better limit values (PI3M3-5)
 2017-12-12 15:44:42 +01:00
PavelSindler
1ef5543a2a dont sort files when print is finished 2017-12-12 15:26:48 +01:00
PavelSindler
a724c2664c menus updated, set lcd_commands_step = 0; 2017-12-12 14:25:13 +01:00
PavelSindler
9ef5570fa3 menus accessable during first layer calibration updated 2017-12-12 13:41:31 +01:00
PavelSindler
d29a95bd65 if first layer calibration is active set SD_PRINTING to true 2017-12-12 11:41:54 +01:00
Robert Pelnar
7204e91ec6 Filament sensor not responding - (PFW-41) 
build number = 130
 2017-12-11 18:17:25 +01:00
Robert Pelnar
124a3e6da8 Stealth mode limits + END_FILE_SECTION=10000 2017-12-11 16:17:36 +01:00
PavelSindler
20de899d25
Merge branch 'MK3' into sort_files 2017-12-11 11:50:47 +01:00
PavelSindler
c9f95628d0 changed version 2017-12-11 11:49:40 +01:00
PavelSindler
13a17f9fd4 dont sort files when changing sort type in settings menu 2017-12-11 11:45:20 +01:00
PavelSindler
1c61f2f29c First working version 2017-12-11 11:30:49 +01:00
Robert Pelnar
c708f63803 build 128 2017-12-11 00:01:47 +01:00
Robert Pelnar
b76758b7b6 Ram status - heap and stack monitor. 2017-12-10 23:45:46 +01:00
Robert Pelnar
e8b2043d03 Stack monitor in stepper ISR 2017-12-10 20:38:09 +01:00
PavelSindler
26135ea227 all sd sort files: initial version; sorting type switch not added to SD card menu itself 2017-12-10 11:08:50 +01:00
Robert Pelnar
9dba7dcd1f DISABLE_M42_M226 = +56 bytes RAM (because of stack overflow) 
build 127
 2017-12-09 19:31:27 +01:00
Robert Pelnar
995801c967 Silent mode limits 
+ cannot compile "END_FILE_SECTION"
 2017-12-09 14:41:50 +01:00
Robert Pelnar
82f5a79527 bug fix (cannot compile) - ultralcd.cpp - conversion from (const char*) 2017-12-08 19:22:02 +01:00
PavelSindler
00945cf7c3 version changed 2017-12-08 16:59:45 +01:00
PavelSindler
868aacc7d5 turn on second serial line from settings menu 2017-12-08 16:56:06 +01:00
PavelSindler
07aa7a3803 support two serial lines at the same time 2017-12-07 19:14:17 +01:00
PavelSindler
d0b6b19373 save filename to eeprom first, then check if file is complete 2017-12-07 17:16:23 +01:00
PavelSindler
b5ad41b8af build number 2017-12-06 18:28:08 +01:00
PavelSindler
2cbd1f7894 fix: added saving filename to eeprom which was removed by accident 2017-12-06 18:13:54 +01:00
PavelSindler
071873b38a init; last merged file: Marlin_main.cpp 2017-12-06 17:48:16 +01:00
PavelSindler
40b7a5c82f build number changed 2017-12-06 14:59:26 +01:00
PavelSindler
44218a1b53 incomplete file check ported from MK2: initial version 2017-12-06 14:55:53 +01:00
XPila
443dc53145
Merge pull request #292 from XPila/MK3 
Automatic filament load in M600
 2017-12-05 18:38:23 +01:00
Robert Pelnar
58f8fdb51b Automatic filament load in M600 2017-12-05 18:37:03 +01:00
PavelSindler
bc0278c6e1 build number changed 2017-12-05 17:13:07 +01:00
PavelSindler
d7db407f32 xyz cal.: add delay_keep_alive messages to reset watchdog (LS optimization method takes more than 4s in some cases) 2017-12-05 13:16:59 +01:00
PavelSindler
22065e4877 merging from dev/MK3 2017-12-02 21:56:39 +01:00
Robert Pelnar
0de584c213 bugfix UVLO - extruder position from stepper 2017-11-29 02:08:15 +01:00
Robert Pelnar
a56b0ccaf8 bugfix - Filament sensor enable from menu 2017-11-29 00:15:45 +01:00
Robert Pelnar
9413eca52c UVLO recover E absolute mode 
build number 119
 2017-11-28 23:41:58 +01:00
Robert Pelnar
13f1684a4c build 118 2017-11-28 22:53:51 +01:00
XPila
1da1eaea01
Merge pull request #117 from PavelSindler/m600 
M600: wait for user before unloading filament
 2017-11-28 22:45:57 +01:00
Robert Pelnar
1863819e39 pat9125 reinit when fsensor enabled from menu. 2017-11-28 22:44:58 +01:00
PavelSindler
020a7ec257 unload filament can be repeated 2017-11-28 19:04:43 +01:00
PavelSindler
059c255a35 changed build version to b117 2017-11-28 18:31:38 +01:00
PavelSindler
c0112f05e1 M600: wait for user before unloading filament 2017-11-28 18:28:53 +01:00
PavelSindler
2cf7f54e5f changed build 2017-11-27 20:29:47 +01:00
PavelSindler
3f7be78997 translation to Czech language added 2017-11-27 18:54:44 +01:00
PavelSindler
bd748bc986 EINY -> EINSY 2017-11-27 18:47:48 +01:00
PavelSindler
211725c946 dont show temp cal message, dont save uvlo flag to eeprom if printing from USB 2017-11-27 18:30:16 +01:00
PavelSindler
ddc8587bbd
Merge pull request #112 from PavelSindler/menu_corrections 
Menu corrections, translation to Czech language
 2017-11-27 18:00:31 +01:00
PavelSindler
ce3f14e1c0 tune menu updated 2017-11-27 17:55:32 +01:00
PavelSindler
67a2e0a706 settings menu updated 2017-11-27 17:01:01 +01:00
PavelSindler
f075711e64 corrected menus 2017-11-27 16:37:46 +01:00
PavelSindler
7c6d63ffb5 pla preheat temp. changed, temp calibration on/off moved to settings menu 2017-11-27 16:21:54 +01:00
PavelSindler
044ed951cb translations to czech language and menu corrections: initial version 2017-11-27 16:06:34 +01:00
Robert Pelnar
7c8de94778 filament unload - initial 
lower currents for power panic
 2017-11-27 15:54:36 +01:00
Robert Pelnar
533418d63e opravene nezadouci resetovani watchdogem 
powerpanic Z shift = 0.64mm (misto 1.92mm)
teplotni kompenzace default = ON
 2017-11-27 14:43:56 +01:00
Robert Pelnar
25c16cc835 Extrudser info, merge upstream (powerpanic fix) 
build number = 114
 2017-11-27 07:44:12 +01:00
XPila
60930beb52
Merge pull request #108 from PavelSindler/power_panic 
Power panic works with folders
 2017-11-27 07:27:17 +01:00
Robert Pelnar
1113124bde PINDA calibration and precalibrated characteristics. 2017-11-27 07:09:53 +01:00
PavelSindler
d9f44eb16b unused code commented 2017-11-27 06:36:41 +01:00
PavelSindler
bd59e11660 removed serial print 2017-11-27 06:22:32 +01:00
PavelSindler
42b533b5d8 first working version 2017-11-27 06:20:51 +01:00
XPila
3b892e16d8
Merge branch 'MK3' into MK3 2017-11-27 04:49:23 +01:00
Robert Pelnar
4dae6f871e Sg load meassurement durring self test - 'Belt status' 2017-11-27 04:46:58 +01:00
PavelSindler
a40c759ee7 First run: show calibration status messages in case that user refused to use wizard 2017-11-27 02:03:42 +01:00
PavelSindler
5a77113fb5 init 2017-11-27 01:59:47 +01:00
PavelSindler
24195557ea removed redundant line 2017-11-27 01:24:58 +01:00
PavelSindler
a7b40d43e3 timeouting to status in the end of first layer cal. 2017-11-27 01:23:11 +01:00
PavelSindler
7de187d813 if user dont confirm live adjust Z by pressing the knob, save last live adjust value to eeprom 2017-11-27 00:17:45 +01:00
PavelSindler
4c7cc5520e "confirm nozzle clean" message re-added 2017-11-26 21:26:36 +01:00
PavelSindler
856d8c1be9
Merge pull request #103 from PavelSindler/print_menu_fix 
Print menu fix
 2017-11-26 20:58:32 +01:00
PavelSindler
a61964666e whitespace and minor corrections 2017-11-26 20:57:28 +01:00
PavelSindler
626818f87d removed debug messages 2017-11-26 20:53:09 +01:00
PavelSindler
d8bf148996 manage heater added 2017-11-26 20:51:56 +01:00
PavelSindler
4297a98fdd debuging messages 2017-11-26 19:10:38 +01:00