3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,207 Commits 3 Branches 78 Tags 40 MiB
898e85e69f
Commit Graph

2466 Commits

Author SHA1 Message Date
Marek Bel
159a1a70d8 Update documentation. 2019-08-26 17:19:57 +02:00
Marek Bel
c27fcf9cff Increase version to 3.8.0-RC2 and build number to 2639. 2019-08-26 17:03:18 +02:00
Marek Bel
52cb37770b Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card. 
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
 2019-08-23 19:30:20 +02:00
Marek Bel
3eb36ca194 Fix cmdqueue_dump_to_serial. 
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
 2019-08-23 16:48:30 +02:00
XPila
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance 
Improve performance of bed PWM automaton
 2019-08-22 14:45:01 +02:00
DRracer
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1 
Code size reduced by almost 5KB
 2019-08-22 14:25:23 +02:00
DRracer
a7c2aec04c Code size reduced by almost 5KB 2019-08-21 09:59:51 +02:00
Marek Bel
3ed6d0637c Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu. 
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
 2019-08-20 19:32:39 +02:00
Marek Bel
f204cdea81 Refactor 
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.

Saves 34B of FLASH and 2B of RAM.
 2019-08-20 17:22:27 +02:00
DRracer
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal 
Fix mmu lay1cal
 2019-08-19 19:07:10 +02:00
Marek Bel
f0642f88f1 Fix power panic broken when PSU_Delta defined. 
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
 2019-08-19 17:37:23 +02:00
Marek Bel
170c1ea866 Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved. 2019-08-16 20:47:55 +02:00
Marek Bel
e53734895f Make MMU load failed blocking to workaround lack of resume print menu item. 
The same workaround used as for USB print (Octoprint).
 2019-08-16 20:20:17 +02:00
Marek Bel
1036c4f755 Do not precede first layer calibration without filament if print is paused due to MMU load failed. 2019-08-16 19:00:45 +02:00
Marek Bel
b10bd8340a Make local functions static. 2019-08-15 17:57:30 +02:00
Marek Bel
0b798767af Fix preheat ASA. 2019-08-15 17:54:23 +02:00
Marek Bel
a6f955b62d Use unused macros *_PREHEAT_FAN_SPEED. 2019-08-15 17:47:34 +02:00
Marek Bel
eb68bb9b43 Add ASA preheat. 2019-08-15 17:46:29 +02:00
Marek Bel
36a69281ee Remove unused functions forward declarations. 2019-08-15 17:36:05 +02:00
DRracer
0e4e644476
Merge branch 'MK3' into MK3_3.8.0 2019-08-15 10:34:50 +02:00
DRracer
ba81149afe
Merge branch 'MK3' into MK3_3.7.3 2019-08-15 10:25:51 +02:00
DRracer
dc78bc7362 Improve performance of bed PWM automaton - proof of concept 
There are still some artefacts on the output pin - work in progress.
 2019-08-14 17:53:08 +02:00
DRracer
2ddbd606f2 Version changed (3.8.0 build 2608) 2019-08-08 16:44:16 +02:00
DRracer
84cf1b83c3
Merge pull request #2083 from DRracer/viper 
Workaround for the "viper" situation bug.
 2019-08-07 17:48:57 +02:00
DRracer
a28c365bb1
Merge pull request #2075 from MRprusa3d/PFW-873b 
farm mode update, documentation correction
 2019-08-07 17:48:30 +02:00
DRracer
d9dec38815 Workaround for the "viper" situation bug. 2019-08-07 17:23:19 +02:00
Robert Pelnar
7da2ee5fc3 Version changed (3.7.3 build 2370) 2019-08-06 15:37:23 +02:00
Yuri D'Elia
33037d369c Prevent LCD long-press re-entry (fixes #1196) 2019-08-05 19:00:29 +02:00
MRprusa3d
b471bb7540 farm mode update, documentation correction 2019-08-05 17:51:26 +02:00
DRracer
5cb86a7e8f
Merge pull request #2074 from kuhnmarek/MK3_PFW-967_filament_sensor_check 
Fw version check disabled in farm mode
 2019-08-05 17:41:16 +02:00
Marek Kühn
091cd49ca5 Fw version check disabled in farm mode 2019-08-05 16:59:09 +02:00
DRracer
9f8590c572
Merge pull request #2072 from kuhnmarek/MK3_PFW-961_blind_sound 
changed blind sound
 2019-08-05 12:47:31 +02:00
Marek Kühn
f77414be2b blind alert sound shorter 2019-08-05 12:41:27 +02:00
Marek Kühn
f1a947af2c Whole hw settings hidden in farm mode 2019-08-05 10:40:21 +02:00
DRracer
cb19f0958b Use _delay() and _micros() for future compatibility 2019-08-05 09:51:06 +02:00
Marek Kühn
5f14e9c2e5 Removed sheet setting when in farm mode 2019-08-03 17:35:39 +02:00
Marek Kühn
15a095ea76 changed blind sound 2019-08-03 15:37:11 +02:00
DRracer
7c9d3dd177 Update doxydoc of new G-codes 2019-08-01 13:09:20 +02:00
DRracer
9214e30f74
Merge pull request #2062 from MRprusa3d/PFW-873 
UI update
 2019-08-01 07:20:09 +02:00
MRprusa3d
2cb977e4a0 UI update 2019-07-31 20:39:57 +02:00
DRracer
e43e89421c
Merge pull request #2056 from BoCoKeith/patch-1 
Correct bug in util.cpp is_whitespace_or_nl function.
 2019-07-31 17:00:49 +02:00
Simon Benoit
49d2866b48 Add threshold distance to Z calibration 
Add missing if statement
 2019-07-30 19:43:07 -04:00
Marek Bel
bca0fd81eb Fix loading filament 255 instead of 0 in first layer calibration wizard. 2019-07-30 19:15:33 +02:00
Marek Bel
0aed59c947 Fix unsigned char overflow cause invalid filament load. 2019-07-30 19:06:57 +02:00
Keith Spitz
952a24b45d
Update util.cpp 
Correct "is_whitespace_or_nl": change 'r' to '\r'.
 2019-07-28 19:40:18 -06:00
leptun
3ddb853bbd Fix shifted languages. Use \n and \x0a 2019-07-26 18:53:08 +03:00
DRracer
0687b8e4a2
Merge pull request #2044 from mkbel/fix_missing_mmu_attention 
Fix missing mmu attention
 2019-07-26 09:07:06 +02:00
Marek Bel
3b396fb8bf Merge branch 'MK3' into fix_missing_mmu_attention 2019-07-25 19:10:07 +02:00
Marek Bel
a9e9a9857b Fix "MMU needs attention screen is missing in case of failed unload filament". 2019-07-25 19:09:52 +02:00
DRracer
3438c0e411
Merge pull request #2042 from NotaRobotexe/octoprint_bugs 
fixed redundant OK messages in serial
 2019-07-25 12:41:43 +02:00
DRracer
2820baf016
Merge pull request #2040 from NotaRobotexe/MK3 
multiple sheets - menu switching bug
 2019-07-25 09:56:07 +02:00
NotaRobotexe
64115fb146 fixed redundant OK messages in serial 2019-07-24 18:08:14 +02:00
NotaRobotexe
5021fadd5d multiple sheets - menu switching bug 2019-07-24 11:20:27 +02:00
DRracer
33195baf9d
Merge pull request #2035 from mkbel/enable_lin_corr 
Re-enable linearity correction for MK3.
 2019-07-24 09:08:43 +02:00
NotaRobotexe
851aaac053 Merge branch 'MK3' of https://github.com/NotaRobotexe/Prusa-Firmware into MK3 2019-07-23 19:29:36 +02:00
NotaRobotexe
fb35009628 multiple sheets,fix of bug in switching sheets from menu 2019-07-23 19:25:59 +02:00
Marek Bel
f9e32c4bf4 Re-enable linearity correction for MK3. 2019-07-23 19:22:54 +02:00
DRracer
3e60cf4537 enable only for MK3S (out of FLASH on the MK3) 2019-07-23 16:51:02 +02:00
DRracer
593675c667 delay, micros for the 3.7.x branch 2019-07-23 16:40:21 +02:00
DRracer
6860a572c2 detection of faulty RAMBo (incorrect capacitor on fan tach pin) for MK3/S 2019-07-23 15:55:53 +02:00
NotaRobotexe
c4d5e332c8
Merge branch 'MK3' into MK3 2019-07-23 11:34:42 +02:00
NotaRobotexe
b9f622f8a6 variables to PROGMEM, text formating 2019-07-23 11:31:20 +02:00
NotaRobotexe
b5129ff2ec Revert "force push" 
This reverts commit 19e7838c20.
 2019-07-23 11:12:53 +02:00
NotaRobotexe
19e7838c20 add default names to PROGMEM, text formating edit 2019-07-22 20:35:10 +02:00
NotaRobotexe
ab2eafe175 sheet menu, add hw setting, sheet change in menu, sheet name initialization in eeprom 2019-07-22 18:43:43 +02:00
DRracer
6f79ef4c9c resolve hidden conflicts in commented code 2019-07-22 17:29:43 +02:00
DRracer
65087b89ee Merge remote-tracking branch 'upstream/MK3' into code_size_optimization 
and resolve conflicts (ultralcd.cpp)
 2019-07-22 17:26:14 +02:00
DRracer
b96c9700ce fix prusa_statistics code size optimization according to unit test 
results
 2019-07-22 17:10:04 +02:00
DRracer
79c326cdaa
Merge pull request #2022 from kuhnmarek/gcodes_doxygen 
Updated doxygen docs to work better with confluence.
 2019-07-22 12:52:27 +02:00
NotaRobotexe
9c95f8c015 sheet menu 2019-07-19 18:34:46 +02:00
Marek Kühn
bd4bfbe586 Added M862 details 2019-07-19 16:15:12 +02:00
Marek Kühn
94e79806bc Updated doxygen docs to work better with confluence. 2019-07-19 13:51:55 +02:00
Marek Kühn
03e80ce4a8 PFW-917 Adjust Z value persists across update to v3.8 2019-07-18 16:50:44 +02:00
DRracer
b0c41ec979
Merge pull request #2017 from NotaRobotexe/octoprint_fix 
Octoprint fix
 2019-07-18 16:02:38 +02:00
DRracer
14b39b0094
Merge pull request #2019 from leptun/MK3_fix_LCD_WDT_RESET 
Fix lcd not initing after WDT reset
 2019-07-18 13:27:32 +02:00
leptun
121e60655a Fix lcd not initing after WDT reset 2019-07-18 11:50:18 +03:00
DRracer
1ae072c332
Merge pull request #2014 from NotaRobotexe/sound_fix 
crash and filament unload sound change
 2019-07-18 09:41:05 +02:00
DRracer
090ea3145d
Merge pull request #2015 from NotaRobotexe/text_edits 
small text edit
 2019-07-18 09:39:28 +02:00
NotaRobotexe
756ce51b5e
Merge branch 'MK3' into octoprint_fix 2019-07-17 20:06:06 +02:00
NotaRobotexe
b8fec59f21 octoprint fan error fix 2019-07-17 19:59:31 +02:00
NotaRobotexe
2bae208133
Merge pull request #2011 from MRprusa3d/PFW-873 
GUI updates
 2019-07-17 14:49:07 +02:00
NotaRobotexe
1c44eddf81 crash and filament unload sound change 2019-07-17 12:32:27 +02:00
DRracer
255db28684 merge unit test and upstream changes 2019-07-17 10:30:49 +02:00
DRracer
eb705b6b17
Merge pull request #2012 from leptun/MK3_LCD_improvements 
LCD fix status screen lcd_putchar
 2019-07-17 08:05:56 +02:00
Yuri D'Elia
3a87ff56f6 Default to "Move Z" above a certain height even when printing 
This speeds-up the ability to manually get the carriage out of the way
just after a print has finished
 2019-07-16 22:04:32 +02:00
leptun
d8ecb2d0c9 Fix status screen 2019-07-16 21:11:27 +03:00
MRprusa3d
034cbff10a GUI updates 2019-07-16 20:10:49 +02:00
Marek Bel
0c660a6fb1 Revert "Fix sketch/lcd.cpp:196:1: warning: no return statement in function returning non-void [-Wreturn-type]." 
This reverts commit a54fd29fa4.
 2019-07-16 21:10:11 +03:00
NotaRobotexe
e6255e8451 octoprint fan error work 2019-07-16 19:18:31 +02:00
DRracer
1dab0f7a04
Merge pull request #2008 from leptun/MK3_LCD_improvements 
Lcd optimization - 1K of flash saved
 2019-07-16 19:15:57 +02:00
Marek Bel
a54fd29fa4 Fix sketch/lcd.cpp:196:1: warning: no return statement in function returning non-void [-Wreturn-type]. 2019-07-16 20:02:01 +03:00
Marek Bel
fecccf50e5 Remove duplicate prototypes from ultralcd.h. Make functions unreferenced outside lcd.cpp static. Disable unused functions by preprocessor to suppress warnings. 2019-07-16 20:01:49 +03:00
Marek Bel
3e292fd6b0 Fix compiler warnings: 
sketch/Marlin.h:178:17: warning: extra tokens at end of #undef directive
sketch/Marlin.h:181:24: warning: extra tokens at end of #undef directive
sketch/Marlin.h:182:0: warning: "enable_z" redefined
 2019-07-16 18:16:28 +02:00
Marek Bel
cee875fc6a Fix compiler warnings: 
warning: enumeration value '_None' not handled in switch [-Wswitch]
warning: enumeration value '_Undef' not handled in switch [-Wswitch]
 2019-07-16 17:40:28 +02:00
Marek Bel
6b8a5bc3ac Fix compiler warnings 
sketch/tmc2130.cpp:146:42: warning: default argument given for parameter 1 of 'void tmc2130_init(bool)' [-fpermissive]
sketch/tmc2130.cpp:146:24: warning: unused parameter 'bSupressFlag' [-Wunused-parameter]
 2019-07-16 17:31:56 +02:00
DRracer
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811 
"disable_z()" for Delta PSU
 2019-07-16 16:46:34 +02:00
DRracer
d65b333664
Merge pull request #2003 from mkbel/heat_hysteresis 
Heat hysteresis
 2019-07-16 13:10:47 +02:00
DRracer
0422713b29
Merge pull request #2005 from prusa3d/MK3_3.7.2 
Mk3 3.7.2
 2019-07-16 08:50:38 +02:00
leptun
8b1c687629 Lcd optimization - 1K of flash saved 2019-07-15 20:32:58 +03:00
Marek Bel
f0727214ed Document 2019-07-15 19:15:15 +02:00