Marek Bel
9083d151b2
wait_for_heater() in restore_print_from_ram_and_continue() only if saved_extruder_temperature differs from target hot-end temperature.
...
This fixes problem, that restore_print_from_ram_and_continue() blocked for heating for at least TEMP_RESIDENCY_TIME (3 seconds) even if temperature was resumed by M600 command.
2019-07-15 18:07:05 +02:00
Marek Bel
ab4e789688
Partially revert "aeed49a Fix filament runout on optical filament sensors"
...
Revert plan move to filament change position before enqued M600.
This was workaround to problem that restore_print_from_ram_and_continue() did 3s heating pause before resuming print. This problem will be fixed properly in restore_print_from_ram_and_continue() in next commit.
Save 166B of FLASH.
2019-07-15 17:22:39 +02:00
Marek Bel
549a8a1a6b
Restore print fan speed earlier then nozzle temperature.
...
Avoids nozzle temperature dip when fan is turned on.
2019-07-15 16:25:21 +02:00
Marek Bel
38ff944b03
Reorder EEPROM items to allow possible future grow for Sheets struct.
2019-07-10 21:03:30 +02:00
Marek Bel
8985d2e26c
Fix fix EEPROM conflict.
2019-07-10 18:50:16 +02:00
Marek Bel
6ed146c37c
Fix EEPROM conflict.
2019-07-10 18:41:12 +02:00
Marek Běl
d3dd0ad271
Merge pull request #1952 from NotaRobotexe/sound
...
new sound
2019-07-10 18:06:32 +02:00
Marek Bel
333ade9aee
Remove non-existing function prototype.
2019-07-10 17:59:04 +02:00
Marek Bel
7189f44bcd
Remove commented out defines.
2019-07-10 17:40:33 +02:00
Marek Bel
e0f46f128d
Fix indentation.
2019-07-10 17:39:24 +02:00
Marek Bel
4e7de776cd
Disable TMC2130 linarity correction for MK3 to save FLASH to enable compilation. Add symlink /Firmware/variants/printers.h to .gitignore.
2019-07-10 17:07:00 +02:00
MRprusa3d
98bae7af9f
Merge branch 'MK3' into PFW-873
2019-07-10 16:50:14 +02:00
MRprusa3d
3333d937ed
some improvements
2019-07-10 16:29:40 +02:00
DRracer
9585789288
Merge pull request #1976 from NotaRobotexe/MK3_3.7.2_PP
...
dont fire power panic at normal power off
2019-07-10 14:19:00 +02:00
Marek Běl
4e3bf276ec
Merge pull request #1984 from leptun/MK3_compile_error_fix_multiple_sheets_Windows
...
Fix compile error on Windows when multiple_sheets is merged
2019-07-09 19:28:35 +02:00
Marek Bel
712fb1cceb
#undef EEPROM_SHEETS_BASE so this internal define for compile-time checking only is not used outside of eeprom.h
2019-07-09 19:19:59 +02:00
Marek Běl
fcfc9ca95c
Merge pull request #1979 from DRracer/heatbed_noise_suppression
...
Heatbed noise suppression
2019-07-09 18:33:27 +02:00
leptun
dbc603d5f6
Fix compile error on windows
...
addresses issue #1965
2019-07-09 18:38:24 +03:00
Marek Bel
898f6d9d8b
Fix EEPROM_Sheets_base overlay of EEPROM_NOZZLE_DIAMETER_uM.
2019-07-09 13:41:18 +02:00
Marek Bel
cd1ea0a655
Move function declaration and structs declarations to top of eeprom.h file.
2019-07-09 13:38:58 +02:00
MRprusa3d
4d535f1217
... incl. SupportMenu ;-P
2019-07-09 12:31:20 +02:00
MRprusa3d
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
Marek Bel
61566f7fb1
Move translated string MSG_V2_CALIBRATION from untranslated section to PROGMEM_I1, add missing ISTR macro. Revert _T(MSG_SELECT) and _T(MSG_RENAME) to _i("Select") and _i("Rename") as it is preferred macro for internationalized strings. Use MSG_V2_CALIBRATION in both occurrences.
2019-07-08 21:18:55 +02:00
DRracer
a16de83535
heatbed audible noise suppression using short fast PWM pulses with
...
variable duty
2019-07-08 16:42:21 +02:00
NotaRobotexe
9592460281
add old delay
2019-07-04 18:43:59 +02:00
NotaRobotexe
a1a8945bee
more code editing
2019-07-04 15:31:44 +02:00
DRracer
1f9dce9513
next almost 200B down
2019-07-04 13:36:02 +02:00
NotaRobotexe
e77898d5dc
code edit
2019-07-04 13:21:27 +02:00
NotaRobotexe
81b3b71cca
check eeprom inicialization
2019-07-03 19:37:11 +02:00
MRprusa3d
4db4f19128
'variant files' update ;-(((
2019-07-03 18:14:48 +02:00
MRprusa3d
7e3cb98a1f
& MK3S
2019-07-03 17:50:41 +02:00
MRprusa3d
a3a7f3106e
print parameters checking
2019-07-03 17:21:11 +02:00
NotaRobotexe
ff3c9d1a7c
dont fire power panic at normal power off
2019-06-28 11:25:56 +02:00
Marek Bel
d344e514c4
Rename functions and macro to match with naming convention - remove 'P' where there is no pointer to progmem.
2019-06-26 15:51:58 +02:00
Marek Bel
d879794922
Remove first parameter of macro menu_format_sheet_P_E, of function menu_format_sheet_P_E and menu_item_submenu_P as it was always called with the same parameter. Saves 66B of FLASH.
2019-06-26 15:47:06 +02:00
Marek Bel
53dbcdd852
Display sheet name when adjusting Z. Costs 130B of flash.
2019-06-26 15:33:54 +02:00
Marek Bel
4a16fe6902
Save z_offset, bed_temp and pinda_temp with sheet calibration.
2019-06-26 14:10:12 +02:00
Marek Bel
20dd1110f6
Remove unused parameters of function _lcd_babystep(int axis, chonst char *msg).
...
Saves 24B of flash memory.
2019-06-25 19:43:10 +02:00
Marek Bel
ebdeb99134
Add menu to show sheet live adjust Z value.
2019-06-25 18:55:25 +02:00
NotaRobotexe
4058cd144b
add delay_keep_alive without updating lcd
2019-06-25 14:30:11 +02:00
Marek Bel
b67ec501b4
Add rename sheet menu.
2019-06-24 17:11:13 +02:00
Marek Bel
e6fbac08ed
Move sheet selector to submenu.
2019-06-21 15:44:56 +02:00
Marek Bel
19a474eaa5
Fix compiler warnings.
2019-06-20 18:00:29 +02:00
Marek Bel
0a48082609
Add steel sheet profile selector.
2019-06-20 16:40:53 +02:00
Marek Bel
89b578c899
Merge branch 'MK3' into multiple_sheets
2019-06-19 18:40:09 +02:00
Marek Bel
524121141a
Remove commented out code. This code is of unknown genesis and purpose. It was added in commit "3.0.10 sync" two years ago and it was already commented out in that moment.
2019-06-19 15:54:24 +02:00
Marek Bel
6a272d83b1
Add compile time check for EEPROM stored varibles size.
2019-06-19 15:09:07 +02:00
Marek Bel
64903e0ae8
Remove unused defines.
2019-06-19 14:27:02 +02:00
Marek Bel
8b6629ad58
Fix comment grammar.
2019-06-18 20:00:02 +02:00
Marek Bel
ae9ae95187
MMU: Filter IR sensor signal when detecting whether filament tip passes to heat break. Increase number of tries when loading filament to 3.
2019-06-18 19:15:16 +02:00
