3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,161 Commits 3 Branches 78 Tags 40 MiB
a821002f02
Commit Graph

3161 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
leptun
a821002f02 Toggle MMU Mode 2019-08-31 07:38:40 +03:00
leptun
6a8330a43b Toggle "HW Setup"* 
All toggles from "HW Setup" were changed.
This includes:
-"Nozzle d."
-all "Checks"
Also added an option to provide a string from sram (not from progmem) as the toggle argument. This can be useful when toggling numbers or even when toggling sheets in the future.
 2019-08-30 17:36:21 +03:00
leptun
b86a92a7d6 Toggle Mode (stepper power) 2019-08-30 07:59:58 +03:00
leptun
db6e2e0525 Toggle Crash det. 2019-08-29 22:31:30 +03:00
leptun
7f51e0bad8 Move SpoolJoin and Cutter to MSGs 2019-08-29 17:35:26 +03:00
leptun
0b21acec46 Minor fix to Toggle Cutter 2019-08-29 15:49:26 +03:00
leptun
d0f9f10ed6 Toggle Cutter 2019-08-29 15:43:41 +03:00
leptun
1937cf2074 Toggle SpoolJoin 2019-08-29 15:40:04 +03:00
leptun
5eea8d26fe Merge branch 'MK3' into MK3_Translations 2019-08-29 12:08:48 +03:00
DRracer
2bcffe32c4
Merge pull request #2140 from mkbel/preheat_asa_hotfix 
Add ASA preheat into mFilamentMenu();
 2019-08-27 20:55:41 +02:00
Marek Bel
bf2097342d Add ASA preheat into mFilamentMenu(); 2019-08-27 17:01:41 +02:00
DRracer
6aaa40b9a3
Merge pull request #2134 from mkbel/fix_power_panic 
Fix repeated power panic restarted print from beginning or jumped at …
 2019-08-27 08:13:26 +02:00
DRracer
a1e68c3d7f
Merge pull request #2135 from prusa3d/MK3_3.8.0 
Increase version to 3.8.0-RC2 and build number to 2639.
 2019-08-27 08:12:27 +02:00
Marek Bel
159a1a70d8 Update documentation. 2019-08-26 17:19:57 +02:00
Marek Bel
c27fcf9cff Increase version to 3.8.0-RC2 and build number to 2639. 2019-08-26 17:03:18 +02:00
Marek Běl
51d01ddd6f
Merge pull request #2133 from mkbel/fix_cmdqueue_debug 
Fix cmdqueue_dump_to_serial.
 2019-08-23 19:50:21 +02:00
Marek Bel
52cb37770b Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card. 
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
 2019-08-23 19:30:20 +02:00
Marek Bel
3eb36ca194 Fix cmdqueue_dump_to_serial. 
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
 2019-08-23 16:48:30 +02:00
XPila
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance 
Improve performance of bed PWM automaton
 2019-08-22 14:45:01 +02:00
DRracer
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1 
Code size reduced by almost 5KB
 2019-08-22 14:25:23 +02:00
DRracer
7a38a985d7
Merge pull request #2123 from mkbel/fix_disable_crash_detection 
Fix disable crash detection
 2019-08-21 15:48:52 +02:00
DRracer
a7c2aec04c Code size reduced by almost 5KB 2019-08-21 09:59:51 +02:00
Marek Bel
3ed6d0637c Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu. 
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
 2019-08-20 19:32:39 +02:00
Marek Bel
f204cdea81 Refactor 
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.

Saves 34B of FLASH and 2B of RAM.
 2019-08-20 17:22:27 +02:00
DRracer
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal 
Fix mmu lay1cal
 2019-08-19 19:07:10 +02:00
DRracer
d44a46b349
Merge pull request #2120 from mkbel/fix_power_panic_2 
Fix power panic broken when PSU_Delta defined.
 2019-08-19 19:06:15 +02:00
Marek Bel
f0642f88f1 Fix power panic broken when PSU_Delta defined. 
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
 2019-08-19 17:37:23 +02:00
leptun
e0acb23993 Fix N/A for German 2019-08-19 12:46:07 +03:00
leptun
0d22f8039e Toggle FSENSOR and FSENSOR_AUTOLOAD 2019-08-19 11:58:16 +03:00
leptun
6e9c44af2d Fix warning 2019-08-19 11:07:11 +03:00
leptun
5a3f14b752 "N/A" toggle support and format update 2019-08-19 10:20:17 +03:00
Marek Bel
170c1ea866 Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved. 2019-08-16 20:47:55 +02:00
Marek Bel
e53734895f Make MMU load failed blocking to workaround lack of resume print menu item. 
The same workaround used as for USB print (Octoprint).
 2019-08-16 20:20:17 +02:00
Marek Bel
1036c4f755 Do not precede first layer calibration without filament if print is paused due to MMU load failed. 2019-08-16 19:00:45 +02:00
DRracer
4c22ec234f
Merge pull request #2109 from mkbel/add_ASA 
Add ASA preheat
 2019-08-15 22:39:15 +02:00
Marek Bel
b10bd8340a Make local functions static. 2019-08-15 17:57:30 +02:00
Marek Bel
0b798767af Fix preheat ASA. 2019-08-15 17:54:23 +02:00
Marek Bel
a6f955b62d Use unused macros *_PREHEAT_FAN_SPEED. 2019-08-15 17:47:34 +02:00
Marek Bel
eb68bb9b43 Add ASA preheat. 2019-08-15 17:46:29 +02:00
Marek Bel
36a69281ee Remove unused functions forward declarations. 2019-08-15 17:36:05 +02:00
DRracer
2853b6a1c3
Merge pull request #2104 from prusa3d/MK3_3.8.0 
Mk3 3.8.0
 2019-08-15 10:39:28 +02:00
DRracer
0e4e644476
Merge branch 'MK3' into MK3_3.8.0 2019-08-15 10:34:50 +02:00
DRracer
9dc09ea8d6
Merge pull request #2103 from prusa3d/MK3_3.7.3 
Mk3 3.7.3
 2019-08-15 10:33:24 +02:00
DRracer
ba81149afe
Merge branch 'MK3' into MK3_3.7.3 2019-08-15 10:25:51 +02:00
DRracer
dc78bc7362 Improve performance of bed PWM automaton - proof of concept 
There are still some artefacts on the output pin - work in progress.
 2019-08-14 17:53:08 +02:00
leptun
596ffe1dc2 Actual fix to the missing first two characters 2019-08-10 21:03:45 +03:00
leptun
7ce2fedac7 Fix missing first two characters in multi-lang mode 2019-08-10 09:16:23 +03:00
leptun
29dcb1cad3 Toggle FANS_CHECK 2019-08-10 08:43:07 +03:00
leptun
505deb28fd Toggle menu item 2019-08-10 08:42:33 +03:00
XPila
5f117b8aa5
Merge pull request #2085 from DRracer/MK3_3.8.0 
Version changed (3.8.0 build 2608)
 2019-08-08 16:58:49 +02:00