3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,047 Commits 3 Branches 78 Tags 40 MiB
a9a3d9d084
Commit Graph

181 Commits

Author SHA1 Message Date
PavelSindler
d005005e22 Merge remote-tracking branch 'upstream/3_4_2' into 3_4_2_branch_merging 2018-10-22 20:33:38 +02:00
PavelSindler
bc247ca02c MK2.5 sw reset at setup function 2018-10-19 17:54:48 +02:00
PavelSindler
b8f92fdfa9 MK2.5 printers set mmu to stealth mode (using Mx code), required mmu2 buildnr can be different for MK2.5 and MK3 printers 2018-10-18 02:44:16 +02:00
mkbel
0d9b502937
Merge pull request #1246 from PavelSindler/variants_max 
MK3: default max feedrate for x and y changed to 100mm/s
 2018-10-10 16:46:34 +02:00
PavelSindler
bbd4f70f41
Merge pull request #1221 from XPila/MK3 
Update fsensor in Manage_inactivity instead of main loop.
 2018-10-10 13:12:12 +02:00
PavelSindler
809ae5a5f0 default max feedrate for x and y changed to 100mm/s 2018-10-09 20:03:28 +02:00
Robert Pelnar
9960c80bf7 Additional check always with enabled oq_meassure 
+ variant files
 2018-10-04 16:12:41 +02:00
MRprusa3d
0184f06dcf preHeatError 
correction of preHeatError detection
 2018-09-27 04:23:00 +02:00
PavelSindler
1bb9e9ed92 MMU_DEBUG 2018-09-10 20:39:28 +02:00
PavelSindler
d96b0d5f32 linearity correction define added (menu readded) 2018-08-30 11:28:12 +02:00
PavelSindler
5769b758ee max feedrate for stealth mode reduced to 100mm/s (because of loudness) 2018-08-26 16:50:28 +02:00
Robert Pelnar
71f1a1f6db MMU - communication, check after start, code cleaning 2018-08-07 20:37:59 +02:00
Robert Pelnar
d378575a68 SNMM_V2 - default retraction declared as variable 2018-08-02 17:07:09 +02:00
PavelSindler
40da6deef8 timeouts used when getting response from mmu, M600 improvements, no filament sensor in variants file 2018-07-31 19:00:42 +02:00
PavelSindler
4fb27866f4
Merge pull request #972 from PavelSindler/end_file_section 
End file section for searching M84 in gcode file enlarged
 2018-07-26 19:59:37 +02:00
PavelSindler
5bc40aff85
Merge pull request #975 from XPila/MK3-new_lang 
EEPROM dump (code D3)
 2018-07-26 19:59:09 +02:00
PavelSindler
5bda19b9f7 config for mmu updated 2018-07-26 14:59:49 +02:00
Robert Pelnar
691e7a24ed EEPROM dump (code D3) 2018-07-26 13:20:35 +02:00
PavelSindler
da82062d41 End file section for searching M84 in gcode file were enlarged (compatibility with mmu Slic3r) 2018-07-25 18:26:22 +02:00
PavelSindler
e47656df97 config for MK2.5 change 2018-07-23 21:12:50 +02:00
PavelSindler
e4641d3db4 config for MK25 Rambo1.0 changed 2018-07-23 21:09:07 +02:00
PavelSindler
f72f385c82 SUPPORT_VERBOSITY temporary solution 2018-07-23 20:11:16 +02:00
PavelSindler
c65efd0114 config file updated 2018-07-23 20:05:42 +02:00
PavelSindler
b688bc9294
Merge branch 'MK3' into reapply_fix_compiler_warnings 2018-07-23 14:38:43 +02:00
Marek Bel
88cce94cf9 Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"" 
This reverts commit 77426b563a.
 2018-07-23 13:35:38 +02:00
Robert Pelnar
60b4db15e0 FSensor - M600 fix + cond. translation + tunning filter and params 2018-07-22 16:14:13 +02:00
Robert Pelnar
1309c52bcf FSensor - code cleaning + simplification 
+ removed DEBUG_DISABLE_FSENSORCHECK
+ added FILAMENT_SENSOR
 2018-07-20 23:48:00 +02:00
PavelSindler
a7e139ad8d limist added to configuration files 2018-07-20 17:38:24 +02:00
Robert Pelnar
2a66251170 _DISABLE_M42_M226 removed 2018-07-19 19:33:28 +02:00
Robert Pelnar
c3e28b490c TMC2130 old style limits removed 
+menu draw_edit fix
 2018-07-19 17:42:59 +02:00
Robert Pelnar
268d2634f0 LCD menu optimalization - lcd and menu 
removed unused code and conditional translation
 2018-07-16 02:13:52 +02:00
Robert Pelnar
39bb855333 LCD menu optimalization - menu_item_edit_int3 
MenuStack removed
FILAMENT_LCD_DISPLAY and ENCODER_STEPS_PER_MENU_ITEM removed (unused)
EXPERIMENTAL_FEATURES menu removed
 2018-07-15 18:37:59 +02:00
Robert Pelnar
007717bfd2 Disabled TMC2130 feedrate and acceleration limits (should be properly limited with M201-M203) 2018-07-12 19:04:44 +02:00
Robert Pelnar
7c78559b0e Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang 2018-07-12 18:27:06 +02:00
Robert Pelnar
066c044396 fixed tmc2130_wr_CHOPCONF 
backlash - initial implementation (disabled by default)
removed menu "W25x20CL init"
splashscreen displayed before entering optiboot
 2018-07-11 20:02:46 +02:00
PavelSindler
5979bf5e0c T-codes for MMU_V2: initial version 2018-07-09 13:57:36 +02:00
Robert Pelnar
8d2acd02a5 Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang 2018-07-09 12:44:58 +02:00
Robert Pelnar
12de2f95e6 Farm mode: PFW360, PFW361, PFW362, PFW363 2018-06-25 17:29:34 +02:00
Robert Pelnar
4d42617b21 LCD menu optimalization, saved ~12k of flash space 2018-06-23 03:22:39 +02:00
Robert Pelnar
2070c01b62 LCD menu printf test 2018-06-18 14:53:42 +02:00
PavelSindler
75c6f0b937 variant files updated 2018-06-13 16:27:11 +02:00
Robert Pelnar
a1ea5019dc Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang 2018-06-10 16:29:29 +02:00
Robert Pelnar
1e35067c3f fixed variant files, removed bool constants 2018-06-10 16:13:29 +02:00
Robert Pelnar
4567d2feca removed unused cond. trans. for NEW_SPI 2018-06-10 16:11:39 +02:00
Robert Pelnar
c0946d8f04 New ML support - w25x20cl spi external flash support 
+fixed some messages
+sec lang update test
 2018-06-09 01:23:04 +02:00
XPila
8963757c3c
Merge branch 'MK3' into crash_detection_stop 2018-06-08 18:28:43 +02:00
PavelSindler
332a23bef5 Crash detection stops and waits for user if it fails multiple times in short time frame 2018-06-08 16:08:07 +02:00
Robert Pelnar
5a2b056d47 Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang 2018-06-01 00:43:16 +02:00
Robert Pelnar
37e575f4bc New ML support - debug output, bootloader 
bootapp - automaticaly erase flash when necessary
+test code
 2018-05-30 19:29:52 +02:00
3d-gussner
167bc61ef9 Fixed redefined warning 2018-05-30 12:57:51 +02:00
Robert Pelnar
15207e4d5e Linearity correction fix - (eeprom storage changed to byte instead of word) 
+enabled for XYZ axes
 2018-05-28 01:47:08 +02:00
Robert Pelnar
8573b65b05 _MIN_ENDSTOP_INVERTING redefinition in variant files (constant -> define) 2018-05-21 23:28:28 +02:00
Marek Bel
2a5a7ab9d2 Add bed calibration points macro definitions to MK25 variants. 
Homing and full print area printing tested on MK25.
 2018-05-09 17:09:57 +02:00
Marek Bel
f00bde09a4 Re-factor bed calibration point coordinates to match bed CAD data. Tested successfully on MK3 (auto home position not calibrated and calibrated printer and print area position of calibrated printer). MK25 not tested. 2018-05-08 21:54:11 +02:00
Robert Pelnar
964d019dd1 MK3 - extruder current = 30 2018-05-02 13:42:05 +02:00
Robert Pelnar
1fc3f9816c Merge remote-tracking branch 'upstream/MK3' into MK3-V3_2 2018-04-30 16:29:02 +02:00
Robert Pelnar
47868145e6 Decreased stallguard sensitivity for Z axis because meshbedleveling failed on some printers (PFW298). 2018-04-30 16:28:26 +02:00
PavelSindler
12dda6a6ca
Merge pull request #688 from PavelSindler/MK3_for_merging 
MK3 variants file change
 2018-04-27 18:41:49 +02:00
PavelSindler
068ee08454 MK3 variants file change 2018-04-27 18:41:00 +02:00
Robert Pelnar
e69134eb1c Rambo 1.0 support (MK25, MK2) 2018-04-27 17:04:55 +02:00
PavelSindler
6fb0fa1458 variants for MK3: temporary change 2018-04-27 15:19:28 +02:00
PavelSindler
99be28d335 variants file: force selftest enabled again 2018-04-27 14:59:56 +02:00
Marek Bel
75075bed31 Hot fix print area crop on MK3. Move print area -2mm in Y axis (Y_PROBE_OFFSET_FROM_EXTRUDER to 3). Do not limit print area for skewed axis (increase Y_MAX_POS to 212.5). Preserve Z homing point for uncalibrated printer (DEFAULT_Y_OFFSET to 2.f). 2018-04-26 22:01:28 +02:00
PavelSindler
84a53370d3 temporary change in MK3 variants file: disable forced selftest 2018-04-26 14:50:16 +02:00
MRprusa3d
7e462b3224
Merge branch 'MK3' into MK3 2018-04-25 19:15:36 +00:00
MRprusa3d
2f49574822
Add files via upload 2018-04-25 18:48:15 +00:00
PavelSindler
5a9cc39562
Merge pull request #654 from XPila/MK3-V3_2 
New current setting for MK3
 2018-04-24 17:10:19 +02:00
Marek Bel
468645e92e Set DEFAULT_Y_OFFSET to 4 mm for MK3 printer. 2018-04-23 20:34:04 +02:00
Robert Pelnar
864284f043 New current setting for MK3 
X, Y: no change
Z: +26.1%
E: -28.5%
 2018-04-23 20:17:45 +02:00
Marek Bel
82b31e8552 Set [0;0] point offset for uncalibrated printer. 2018-04-20 15:01:11 +02:00
PavelSindler
78245ce566
farm preheat temperature for heatbed 2018-04-11 18:54:27 +02:00
MRprusa3d
6b77e68924
Add files via upload 2018-04-10 18:07:08 +00:00
Robert Pelnar
339d2ebdef Z-axis stealth mode 
XYZcal fix
 2018-04-03 18:26:39 +02:00
Robert Pelnar
92997204a1 Linearity correction - TMC codes for calibration object, variable stored as uint8, range from 1.03 to 1.20 2018-04-03 12:30:35 +02:00
Robert Pelnar
baade7db61 Removed unused files (ST7565R-dogm, digipot) 
renamed functions digipot_init and digipot_current
fixed cond. trans. (menus)
fixed variant files - MK25, MK3
 2018-03-29 23:01:13 +02:00
Robert Pelnar
8ba83a9789 bugfix - PFW226 - selftest error 2018-03-28 16:13:54 +02:00
Robert Pelnar
3ff5686336 MK2-25-3 variant files 2018-03-14 13:53:36 +01:00
Robert Pelnar
2f98ac989a Variant file for MK2 + cond. translation 2018-03-13 23:14:44 +01:00
Robert Pelnar
81cd96b8fe Variant file for MK25 + cond. translation 2018-03-13 23:02:46 +01:00
Robert Pelnar
c163d8a9f7 Variant file for MK3 2018-03-13 22:40:20 +01:00
Robert Pelnar
46cecb1bdf deleted unused file 2018-03-13 20:44:06 +01:00
Robert Pelnar
ac1a56b493 Merge branch 'MK25' into MK3 2018-03-13 20:43:19 +01:00
Marek Bel
7164e66e4d Remove Rpi port menu item for MK25. 2018-03-05 17:14:20 +01:00
Robert Pelnar
c5175e97ec Pinout, conditional translation and variant file for MK2 2018-02-21 15:19:34 +01:00
Robert Pelnar
8562235440 MK2.5 port - compilable version 2018-02-01 20:08:11 +01:00
Robert Pelnar
f40b8a2186 MK3 configuration files, renamed EINY to EINSY 2018-02-01 17:10:41 +01:00
Robert Pelnar
f46d36a1d4 removed unused files (pins, variants) 2018-02-01 16:39:56 +01:00
Robert Pelnar
c6e10fb903 Removed SG software homming 
After Calibration Z enabled minstop (SG and PINDA)
TMC2130 code simplification
 2017-12-15 14:10:20 +01:00
PavelSindler
22065e4877 merging from dev/MK3 2017-12-02 21:56:39 +01:00
michalprusa
1e81861e0c Configuration files reordered and added build number 2017-11-07 23:54:06 +01:00
michalprusa
14a8c33096 Merge remote-tracking branch 'origin/MK3' into MK3 2017-09-26 00:51:12 +01:00
bubnikv
ed0fe01bcc Decreased the homing feedrate for the X axis from 3000 to 2500mm/min. 
With the old settings the stall guard did not work reliably.
 2017-09-25 15:22:20 +02:00
michalprusa
39e32c8b3a Sync of Configuration_prusa to proper variant 2017-09-23 14:28:40 -04:00
Robert Pelnar
9105de073c Cmdqueue code in separate files, debug codes for read/write eeprom and ram, PWM amplitude for Y axis stealtchop mode increased to 210. 2017-09-14 16:19:49 +02:00
Robert Pelnar
0122146dd8 Fixed configuration files (missing TEMP_SENSOR_PINDA and TEMP_SENSOR_AMBIENT) 2017-09-12 12:35:58 +02:00
Robert Pelnar
9c324bfeda Stealth chop mode creek fix - TCOOLTHRS must be set to zero, Y-axis current increased. 2017-09-08 21:58:39 +02:00
Robert Pelnar
d9cdb1da60 Ambient thermistor - table and conversion function, extruder motor changed back to 200steps type, extruder resolution changed to 32usteps. 2017-09-06 16:04:50 +02:00
Robert Pelnar
f563618b1c PINDA thermistor + extruder current adjust. 2017-08-30 21:56:48 +02:00
Robert Pelnar
d63045fdb3 TMC2130 stallguard improovment - axis load monitoring, autocalibrate Z. 2017-08-21 13:06:17 +02:00
Robert Pelnar
683784c4c7 PAT9125 I2C, hardware SG homing 
separate pin configuration file for each board
changed board codes:
RAMBO =100, MiniRambo1.0 =200, MiniRambo1.3 = 203, Einy03 =303, Einy04 =304
 2017-08-17 15:23:34 +02:00