3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,775 Commits 3 Branches 78 Tags 40 MiB
b178252eb9
Commit Graph

202 Commits

Author SHA1 Message Date
DRracer
a10b7f3963
Merge pull request #2470 from leptun/MK3_Adjusted_mintemp 
Adjusted hotend, bed and Ambient mintemp values
 2020-02-07 08:54:50 +01:00
Yuri D'Elia
eb2ca78167 Rewrite uvlo handling for accurate Z re/positioning 
- In both uvlo_ and uvlo_tiny, calculate Z usteps properly and adjust
  the Z position to a true fullstep before disabling the motor. This
  avoids shifs during recovery.
- In uvlo_tiny, instead of moving up indefinitely, adjust Z just
  once using the smallest move possible (new def UVLO_TINY_Z_AXIS_SHIFT)
- Perform all the uvlo/recovery processing in physical coordinates
  and MBL off: there should be no automatic Z movement!
- Disable heaters in both handlers to conserve more power.
- Add timing information to uvlo_tiny too.
- During recovery, to switch between physical and logical positioning
  introduce a new "PRUSA MBL" gcode as most of the procedure is
  enqueued, and no existing gcode was available.
 2020-01-26 17:46:50 +01:00
Alex Voinea
e6ba9e633c
Adjusted hotend, bed and Ambient mintemp values 2020-01-21 14:50:53 +02:00
DRracer
4c74866864
Merge pull request #1933 from prusa3d/enable_cutter 
Enable MMU cutter.
 2020-01-09 13:47:44 +01:00
Alex Voinea
779423f0e7
Move hardcoded values to variants 2019-11-29 15:06:54 +02:00
DRracer
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu 
Unify preheat menu, add ASA material
 2019-09-12 14:25:38 +02:00
Marek Bel
0fda4e5594 Merge branch 'cut_last_try' into enable_cutter 2019-09-10 18:37:09 +02:00
DRracer
898e85e69f
Merge pull request #2038 from Eriobis/MK3 
Add a threshold distance to Z calibration
 2019-09-10 16:20:24 +02:00
MRprusa3d
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h 2019-09-09 02:20:39 +02:00
MRprusa3d
70de4d58f6
Update 1_75mm_MK3-EINSy10a-E3Dv6full.h 2019-09-09 02:20:14 +02:00
MRprusa3d
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h 2019-09-09 02:19:52 +02:00
MRprusa3d
325e4a3403
Update 1_75mm_MK25S-RAMBo10a-E3Dv6full.h 2019-09-09 02:19:27 +02:00
MRprusa3d
0b50b2295c
Update 1_75mm_MK25-RAMBo13a-E3Dv6full.h 2019-09-09 02:18:54 +02:00
MRprusa3d
e581263bf1
Update 1_75mm_MK25-RAMBo10a-E3Dv6full.h 2019-09-09 02:18:22 +02:00
MRprusa3d
ca6937edaf
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h 2019-09-09 02:17:42 +02:00
MRprusa3d
a9a3d9d084
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h 2019-09-09 02:17:00 +02:00
Marek Bel
3da43ae8c2 Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile. 2019-08-26 21:14:07 +02:00
Marek Bel
eb68bb9b43 Add ASA preheat. 2019-08-15 17:46:29 +02:00
Marek Bel
469ca6e184 Merge commit 'refs/tags/v3.8.0-RC1^{}' into enable_cutter 2019-08-15 14:48:28 +02:00
Simon Benoit
49d2866b48 Add threshold distance to Z calibration 
Add missing if statement
 2019-07-30 19:43:07 -04:00
Marek Bel
f9e32c4bf4 Re-enable linearity correction for MK3. 2019-07-23 19:22:54 +02:00
DRracer
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811 
"disable_z()" for Delta PSU
 2019-07-16 16:46:34 +02:00
Marek Bel
4e7de776cd Disable TMC2130 linarity correction for MK3 to save FLASH to enable compilation. Add symlink /Firmware/variants/printers.h to .gitignore. 2019-07-10 17:07:00 +02:00
MRprusa3d
8229a45187 pre-production version ;-) 2019-07-09 12:16:51 +02:00
MRprusa3d
4db4f19128 'variant files' update ;-((( 2019-07-03 18:14:48 +02:00
MRprusa3d
7e3cb98a1f & MK3S 2019-07-03 17:50:41 +02:00
MRprusa3d
a3a7f3106e print parameters checking 2019-07-03 17:21:11 +02:00
Marek Bel
181c42fa62 Merge remote-tracking branch 'prusa3d/MK3' into enable_cutter 2019-06-18 20:03:41 +02:00
MRprusa3d
b7d3766ae2
Merge branch 'MK3' into PFW-790 2019-06-12 17:32:13 +02:00
Marek Bel
00da4640e2 Document. 2019-05-30 23:29:33 +02:00
Marek Běl
efa8e6e6ba
Merge pull request #1658 from Harpalyke/save-ustep-res-with-M500 
Allow save of uStep resolution with M500
 2019-05-13 17:08:34 +02:00
Marek Bel
a9d6ae296b Enable watchdog for all variants. 2019-05-10 16:30:08 +02:00
Robert Pelnar
18dec75b56 MK2.5 - watchdog enabled + test (command "D-1") 2019-04-29 13:19:59 +02:00
Marek Bel
469aa10097 Enable MMU cutter. 2019-03-29 07:27:29 +01:00
MRprusa3d
632781c4a2 "disable_z()" for Delta PSU 2019-03-21 00:45:15 +01:00
Harpalyke
0f21ccee3c Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S 2019-03-19 21:39:59 +00:00
MRprusa3d
7d98177716 farmMode updates 2019-03-19 19:48:40 +01:00
PavelSindler
c05561d6b1
Merge pull request #1607 from PavelSindler/7x7 
7x7 mbl and switching mmu modes
 2019-03-15 19:55:15 +01:00
PavelSindler
0ca52216f3 Revert "variants update" 
This reverts commit c3a95ab79b.
 2019-03-15 13:14:32 +01:00
Marek Bel
ffe45bdef3 Disable mmu filament cutter feature. 2019-03-15 03:38:37 +01:00
PavelSindler
9e0e4198c5 Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update 2019-03-14 01:52:44 +01:00
PavelSindler
c3a95ab79b variants update 2019-03-12 11:57:35 +01:00
PavelSindler
f0cc313fed debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified 2019-03-06 19:56:48 +01:00
PavelSindler
7f92d73a40 MMU_STEALTH_MODE -> MMU_FORCE_STEALTH_MODE; activate_stealth_mode() function update 2019-03-04 17:04:22 +01:00
PavelSindler
26cab2911f mmu stealth mode 2019-02-22 16:30:54 +01:00
PavelSindler
a220c97f94 Revert "variant files" 
This reverts commit 850d3316b6.
 2019-02-06 16:19:30 +01:00
PavelSindler
850d3316b6 variant files 2019-02-06 15:18:12 +01:00
PavelSindler
5324181bf7 maximum bed level correction value enlarged from 50um to 100um and is now used in menus and mesh bed leveling itself 2019-02-03 20:56:14 +01:00
PavelSindler
60acdd23c5 variants 2019-01-28 21:12:38 +01:00
PavelSindler
8f039263d5 variant files and version 2019-01-28 17:14:24 +01:00