3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,313 Commits 3 Branches 78 Tags 40 MiB
c07bcd172a
Commit Graph

4313 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
3d-gussner
c07bcd172a Fix NO Stop print during MBL 2021-02-15 18:34:08 +01:00
3d-gussner
8bc46248f6 avoid having the block body twice in the code. Thanks to @DRracer 2021-02-10 11:09:29 +01:00
3d-gussner
e5711ea84f Indentation to 4 spaces for tabs 2021-02-10 11:03:23 +01:00
3d-gussner
2ba24fe0d4 Add pause/resume to USB/host prints via LCD menu 
Depending if SD or USB/host print the firmware sends
- SD print: `// action:paused` or `// action:resumed` are send to inform USB/Host
- USB/host print: `// action:pause` or `// action:resume` are send to trigger the USB/host to handle it

- USB/host must handle `// action:pause` and `// action:resume` correctly to work
  - Tested with Octoprint
    - It handles every thing correctly
    - Any combination of Octoprint and/or LCD `pause` and `resume` working correctly
  - Tested with Pronterface
    - It pauses BUT doesn't send the printer in pause position, and so it is not possible to `resume` from LCD menu
    - I guess some Macros can fix that.
  - Repetier Host/Server documentation shows that it should work. Not tested.

Could save 56 bytes in first step and additional 38 bytes adding `MSG_PAUSE_PRINT` to messages.c/.h

Updated `lang_en*.txt`
@todo Polish translation is 19 characters long (it still fits) BUT should be corrected to 18 chars.
 2021-02-03 11:00:26 +01:00
DRracer
0bda4504c1
Merge pull request #3013 from leptun/MK3_DIR_DEPTH 
DIR depth adjustments
 2021-02-02 20:20:25 +01:00
Alex Voinea
896f4e1dd1 Fix compile error 2021-02-02 19:14:05 +02:00
Alex Voinea
f6ae379077 Fix dir_names array definition. Prevents overrun 2021-02-02 19:08:44 +02:00
Alex Voinea
5c9d202871 Change MAX_DIR_DEPTH from 10 to 6 
You can't run M23 with so many directories as the length of the command will exceed the maximum allowed by cmdqueue
 2021-02-02 19:08:19 +02:00
DRracer
f7fd7a5331
Merge pull request #3012 from leptun/MK3_IP_support 
M552 - Printer IP address
 2021-02-02 15:42:04 +01:00
Alex Voinea
647cde0cae Add documentation 2021-02-02 13:38:20 +02:00
Alex Voinea
2f4119a6d7 M552 - Printer IP address 2021-02-02 13:21:16 +02:00
DRracer
2b81abb24c
Merge pull request #2814 from wavexx/MK3_PAT9125_I2C 
Use hardware TWI for the PAT9125 (optical) filament sensor
 2021-02-02 09:15:35 +01:00
DRracer
40e45c5eaa
Merge pull request #3009 from leptun/PFW-1144-LongPathName 
"M27 P" support. Get current file absolute filename (file path)
 2021-02-01 14:41:15 +01:00
DRracer
58c217a340
Merge pull request #2988 from leptun/PFW-1171-EEPROM_SN 
Cache SN to EEPROM on startup
 2021-02-01 14:24:13 +01:00
Alex Voinea
7e09df6a34 Add documentation 2021-02-01 14:54:44 +02:00
Alex Voinea
b6d56bc0f4 Change M27 argument from L to P as that makes more sense (path vs LFN)) 2021-02-01 14:54:37 +02:00
Yuri D'Elia
ec4c1be058 Silence bUpdateEEPROM unused warning in MK3 variant 2021-02-01 07:09:44 +01:00
Voinea Dragos
30131c9ab5 Patch broken string PROGMEM transition with setTargetedHotend() error 2021-02-01 06:12:37 +01:00
Voinea Dragos
ea44d78d68 Merge branch 'MK3' into PFW-1171-EEPROM_SN 2021-01-31 17:19:00 +02:00
Voinea Dragos
698499f00d split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
Voinea Dragos
6b6205d2f6 M27 refactoring and M27 L initial implementation 2021-01-31 15:06:20 +02:00
Yuri D'Elia
b8b75186fe Remove the extra copy of CRITICAL_SECTION from fastio 2021-01-29 18:30:16 +01:00
Yuri D'Elia
31b3ad0613 Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C 2021-01-29 18:28:55 +01:00
Yuri D'Elia
2d71a071f0 Switch twi.c to fastio 2021-01-29 17:51:38 +01:00
Yuri D'Elia
1fa7b8cd8d Move SDA/SCL pins into pins.h for fastio compatibility 
fastio relies on macros for pin definitions, so we cannot use the const
declaration in Sd2PinMap or the arduino's definition.

Declare SDA/SCL_PIN into pins.h based on the current MCU, which is
identical in all our variants.

Remove the conflicting/unused declaration in Sd2PinMap.
 2021-01-29 17:48:59 +01:00
Yuri D'Elia
30262b0a6e Remove redundant definitions of CRITICAL_SECTION_* 
Move CRITICAL_SECTION_START/END into fastio.h, where it's needed.
 2021-01-29 17:30:04 +01:00
DRracer
42311db5f1
Merge pull request #2789 from wavexx/MK3_TMC2130_DEDGE 
Use/enable TMC2130 DEDGE support in MK3/MK3S
 2021-01-29 11:13:09 +01:00
Yuri D'Elia
e9d5c44732 Also toggle pins efficiently in sm4.c 
Use the same technique used in fastio to toggle pins efficiently in sm4
when DEDGE is used.
 2021-01-29 00:13:49 +01:00
3d-gussner
fba83bd309 Add new flags -c -p -n 2021-01-28 09:48:05 +01:00
Yuri D'Elia
a9625747db Reinstate the nop instruction as delay in non-DEDGE 
When TMC2130_MINIMUM_PULSE is 0 a minimum delay is implied.
In this case, use a single "nop" instruction.
 2021-01-26 19:43:29 +01:00
Yuri D'Elia
d3734b02cc Also fix delay instances inside unused BACKLASH_[XY] 2021-01-26 16:18:23 +01:00
Yuri D'Elia
b17cdcd4d7 Ensure MINIMUM_PULSE is always 0 in DEDGE mode 
This ensures delays are always properly elided without having to check
for DEDGE all over the place.
 2021-01-26 16:12:59 +01:00
Yuri D'Elia
2a6989ecd5 Remove TMC2130 special-cases 
With the new STEPPER_MINIMUM_DELAY being automatically removed for
TMC2130 we no longer need to add specialized #ifdefs for DEDGE in
babystep.
 2021-01-26 16:09:23 +01:00
Yuri D'Elia
4fed728e08 Elide delayMicroseconds for TMC2130 in non-DEDGE mode 
Introduce new macros TMC2130_MINIMUM_DELAY/STEPPER_MINIMUM_DELAY for
blocking pauses.

If MINIMUM_PULSE has defined to be zero, avoid the delay call entirely.
 2021-01-26 16:02:53 +01:00
D.R.racer
c28e5a9dbc Farmer's request 2 
Farmers request having the Change filament menu item always visible in
the main menu and located after the Live Adjust Z (which disappears
after the first few printed layers).
 2021-01-26 12:19:41 +01:00
DRracer
bfe93d3959
Merge pull request #2951 from DRracer/pvb-08 
Add PVB preheat and 0.8mm nozzle presets
 2021-01-26 12:09:41 +01:00
DRracer
891f37a622
Merge pull request #2982 from DRracer/codesize 
Reduce code size and RAM usage
 2021-01-26 12:04:39 +01:00
3d-gussner
0aae433bda Update po files after all these changes 2021-01-26 11:08:57 +01:00
3d-gussner
c555907a12 Remove duplicate string G-code sliced for a different printer type. Please re-slice the model again. Print cancelled. using MSG_GCODE_DIFF_PRINTER_CANCELLED 2021-01-26 11:01:50 +01:00
3d-gussner
51d1e0bd8a Remove duplicate string G-code sliced for a different printer type. Continue? using MSG_GCODE_DIFF_PRINTER_CONTINUE 2021-01-26 10:42:56 +01:00
3d-gussner
7916f8b9e8 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 10:13:11 +01:00
D.R.racer
0eb7261e29 Save ~100B on menu implementation 2021-01-26 09:29:17 +01:00
3d-gussner
ba8386573a Remove duplicate string Resume print using MSG_RESUME_PRINT 2021-01-26 09:23:55 +01:00
3d-gussner
c6a01b3806 Remove duplicate string Reset using MSG_RESET 2021-01-26 09:15:46 +01:00
3d-gussner
ab5aad636f Remove duplicate string Mesh Bed Leveling and Mesh bed leveling using MSG_MESH_BED_LEVELING 
Fixed few too long translations
 2021-01-26 09:05:38 +01:00
DRracer
f4cee7ce84
Merge pull request #2983 from leptun/MK3_fix_sm4.h_line_ending 
Fix sm4.h line ending
 2021-01-26 08:45:07 +01:00
DRracer
bce9f8c949
Merge pull request #2984 from leptun/MK3_Serial_LF_only 
Do not send CR on the serial line
 2021-01-26 08:42:47 +01:00
DRracer
c465417f50
Merge pull request #2987 from leptun/PFW-1144-LongPathName 
"M20 L" support. Print long filenames
 2021-01-26 08:40:26 +01:00
3d-gussner
84ed0725f2 Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize 2021-01-26 08:32:03 +01:00
3d-gussner
bce8501eea Remove duplicate string Extruder using MSG_Extruder 2021-01-26 08:31:21 +01:00