3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,000 Commits 3 Branches 78 Tags 40 MiB
c31109c750
Commit Graph

236 Commits

Author SHA1 Message Date
D.R.racer
04de9c0c8a Version changed (3.10.0 build 4481) 2021-05-06 13:46:05 +02:00
Yuri D'Elia
8d04316497 Revert/cleanup mininum extruder height during M600 
This change restores the minimum extruder height for filament purge
during M600 from the current 50mm back to 27mm from FW 3.9.

We do this by introducing a new option for unload_filament() to indicate
that the unload is part of an automatic swap, and in such cases avoid
raising more than absolutely necessary (this will _also_ come in handy
to avoid the extra purge in PR #2318 during M600).

A new define MIN_Z_FOR_SWAP is introduced for this purpose.
MIN_Z_FOR_UNLOAD is still used for manual lcd unload and for M702 and
hasn't been changed.
 2021-04-21 19:07:58 +02:00
D.R.racer
c43688a549 Version changed (3.10.0-RC2 build 4104) 2021-04-16 13:52:36 +02:00
D.R.racer
f31189e5be Version changed (3.10.0-RC1 build 4078) 2021-03-17 12:30:54 +01:00
DRracer
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating 
Raise Z while preheating when auto/[un]loading the filament
 2021-01-11 07:45:54 +01:00
D.R.racer
603d704178 Version changed (3.9.3 build 3556) 2021-01-07 12:50:58 +01:00
D.R.racer
7e02a7f118 Version changed (3.9.3-RC1 build 3555) 2020-12-26 15:45:34 +01:00
D.R.racer
396ee0fde2
Version changed (3.9.2 build 3524) 2020-11-10 10:27:18 +01:00
Yuri D'Elia
e28159122f Make MIN_Z_FOR_LOAD/UNLOAD the same 
When unloading + preheat immediately followed by a load, the carriage is
raised first up to 20mm, then again to 50mm.

With PR #2318 it makes sense to make more space for the extra extrusion
anyway, so make them the same. This moves the carriage only once _while_
preheating, which is nice.
 2020-10-29 15:30:16 +01:00
D.R.racer
7278458316 Version changed (3.9.1 build 3518) 2020-09-18 16:59:22 +02:00
D.R.racer
02891f6bb8 Version changed (3.9.1-RC1 build 3512) 2020-09-02 11:56:53 +02:00
D.R.racer
2447dbc69f Version changed (3.9.0 build 3421) - sync 2020-05-18 16:56:32 +02:00
D.R.racer
285088a715 Version changed (3.9.0 build 3421) 2020-05-18 16:45:18 +02:00
DRracer
7be713199d Version changed (3.9.0-RC3 build 3401) 2020-04-28 12:06:13 +02:00
DRracer
40c052f482 Version changed (3.9.0-RC2 build 3398) 2020-04-24 20:02:13 +02:00
DRracer
2e18a48b87 Version changed (3.9.0-RC1 build 3272) 2020-02-17 16:47:56 +01:00
Yuri D'Elia
4b85664b27 Raise default extruder jerk to 4.5 
This should be the new default for LA1.5 for direct drive printers and
newer PrusaSlicer profiles too (hopefully).
 2020-02-03 15:42:27 +01:00
DRracer
95a2ad533d Version changed (3.9.0 build 3175) 2020-01-16 16:03:34 +01:00
DRracer
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements 
"Unknown z" improvements
 2019-11-08 14:52:56 +01:00
Marek Bel
023ce01f9d Version 3.8.1 final. 2019-10-24 16:12:46 +02:00
Yuri D'Elia
50231b76da Improved handling of unknown Z position 
- Introduce raise_z_above to move Z carefully when the current position
  is potentially unknown, using stallguard
- Use raise_z_above for:
  * filament loading/unloading clearance
  * extruder spacing when preheating (to avoid buildplate marks on PEI)
  * before homing to avoid damaging the build plate and to avoid
    repeated Z moves as well

Since raise_z_above is conditional, it will only raise when needed.

Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
 2019-10-22 15:49:10 +02:00
Marek Bel
0dde5e3167 Increase version. 2019-10-03 17:37:22 +02:00
Marek Bel
4fc4cf9c11 Increase version and commit number. 2019-10-03 17:30:14 +02:00
DRracer
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu 
Unify preheat menu, add ASA material
 2019-09-12 14:25:38 +02:00
DRracer
898e85e69f
Merge pull request #2038 from Eriobis/MK3 
Add a threshold distance to Z calibration
 2019-09-10 16:20:24 +02:00
MRprusa3d
28c1486df2
Update Configuration.h 2019-09-09 02:14:10 +02:00
DRracer
eec8e5f8c0 Version changed (3.8.0 build 2684) 2019-09-06 19:47:05 +02:00
Marek Běl
3f04c4db87
Merge branch 'MK3' into preheat_menu 2019-08-27 22:20:23 +02:00
Marek Bel
269aef1696 Remove unused code guarded by WATCH_TEMP_PERIOD macro as most of the functionality is duplicate to what is implemented in temp_runaway_check(). This will release us from porting setWatch() to unified preheat menu and maintaining it. 2019-08-27 20:05:10 +02:00
Marek Bel
c27fcf9cff Increase version to 3.8.0-RC2 and build number to 2639. 2019-08-26 17:03:18 +02:00
DRracer
2ddbd606f2 Version changed (3.8.0 build 2608) 2019-08-08 16:44:16 +02:00
DRracer
0422713b29
Merge pull request #2005 from prusa3d/MK3_3.7.2 
Mk3 3.7.2
 2019-07-16 08:50:38 +02:00
MRprusa3d
98bae7af9f
Merge branch 'MK3' into PFW-873 2019-07-10 16:50:14 +02:00
MRprusa3d
8229a45187 pre-production version ;-) 2019-07-09 12:16:51 +02:00
MRprusa3d
a3a7f3106e print parameters checking 2019-07-03 17:21:11 +02:00
Marek Bel
a59e7090ea Increase version. 2019-06-27 17:32:40 +02:00
Marek Bel
fee67d9451 Increase version. 2019-06-13 16:37:51 +02:00
Marek Bel
e93f043fee Increase version 3.7.1 final. 2019-05-13 15:09:58 +02:00
Robert Pelnar
85806a0f38 variable bed pwm frequency fix (input value is 7bit, not 8bit) 2019-05-07 15:35:34 +02:00
Robert Pelnar
58683da2fb Variable bed PWM resolution/frequency (adjusted to 5bits/32Hz) 2019-05-06 18:07:42 +02:00
PavelSindler
a8d8d9e4c9 version change 2019-04-01 20:52:24 +02:00
PavelSindler
e37c2e0b2e version change 2019-03-15 20:01:02 +01:00
PavelSindler
7c5e9500a8 version change 2019-03-15 20:00:07 +01:00
PavelSindler
f0cc313fed debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified 2019-03-06 19:56:48 +01:00
PavelSindler
22c0d6e230
Merge pull request #1577 from mkbel/add_cut 
Add MMU cut filament
 2019-03-01 14:53:12 +01:00
PavelSindler
488497df2c version change 2019-03-01 13:56:03 +01:00
PavelSindler
ca88010018 Revert "version change" 
This reverts commit f14733f2dd.
 2019-03-01 13:54:25 +01:00
PavelSindler
f14733f2dd version change 2019-03-01 13:53:18 +01:00
Marek Bel
5a5a482a59 Rename preprocessor macro K1 to PID_K1 to avoid future conflict with MMU command. 2019-02-26 13:59:44 +01:00
PavelSindler
da28773480 version change 2019-02-21 19:16:24 +01:00