3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,753 Commits 3 Branches 78 Tags 40 MiB
d47363d85a
Commit Graph

99 Commits

Author SHA1 Message Date
Yuri D'Elia
d47363d85a Update the filament axis resolution when E resolution is changed 
The filament sensor "chunk lenght" needs to be updated every time the
E axis resolution is changed in order to trigger at the same distance.

Introduce a new function fsensor_set_axis_steps_per_unit() and use
it consistent during init, in M92 and M350.
 2020-02-05 16:20:12 +01:00
Yuri D'Elia
ce74b746f1 FS: Trigger a runout with repeated soft-failures (clog?) 2020-02-05 16:20:12 +01:00
Yuri D'Elia
8fb8ff4bf4 Include fsensor recovery stats in the last print stats 2020-02-05 16:20:12 +01:00
Yuri D'Elia
e8ce5e140e FS: Detect runout earlier 2020-02-05 16:20:12 +01:00
DRracer
1b7677c768
Merge pull request #2394 from wavexx/fsensor_no_recursion 
Avoid more recursive behavior in fsensor_update
 2020-01-30 14:18:07 +01:00
Yuri D'Elia
186f881600 Avoid calling fsensor_update() one level earlier 
Move the common checks between filament sensors out of fsensor_update().

Disable the runout check if a saved state is already present (this check
was missing in the PAT9125 variant) as this is currently not supported.

Note that the CHECK_FSENSOR looks completely redundant besides
e_active().
 2019-12-29 22:08:44 +01:00
Yuri D'Elia
bd80ee88a0 Set the IN_HANDLER busy state while checking the filament 2019-12-29 21:27:42 +01:00
Yuri D'Elia
97170ed68d Do not call process_commands() within fsensor_update() 
Plan moves directly to reduce the required stack size.
 2019-12-27 19:37:20 +01:00
Yuri D'Elia
fe4c00fb8a Lift the extruder when checking for the filament 
This avoids leaving marks on the print
 2019-12-27 19:35:08 +01:00
Yuri D'Elia
301d64042b Set fsensor_watch_runout earlier to prevent re-entry 
Do not set/clear fsensor_watch_runout within fsensor_oq_meassure_start
which is used outside of fsensor_update where it could have a different
starting value.

Set it within fsensor_stop_and_save_print to immediately prevent
re-entry.
 2019-12-27 19:34:36 +01:00
Yuri D'Elia
5122f79a39 Merge remote-tracking branch 'upstream/MK3' into MK3_LA15 2019-12-04 17:27:23 +01:00
Yuri D'Elia
6ecff003b7 Fix M600 insertion by the filament sensor 
Remove incorrect usage of stop_and_save_print combined with the
fsensor_recovert internal instruction which would result in a
broken sequence of events and/or broken stack.

Re-use the now safe stop/recover functions in the same spot
(fsensor_checkpoint_stream) to effectively cut a hole in the current
gcode stream to insert an M600 instruction, which removes all
recursive behavior without the need of extra state variables.
 2019-11-28 17:13:37 +01:00
MRprusa3d
011468598e IR sensor gen. II 
disconnected PCB detection
 2019-09-16 00:43:37 +02:00
Yuri D'Elia
18b8dc89e5 Merge remote-tracking branch 'upstream/MK3' into MK3_LA15 2019-08-04 17:06:34 +02:00
Marek Bel
ab4e789688 Partially revert "aeed49a Fix filament runout on optical filament sensors" 
Revert plan move to filament change position before enqued M600.
This was workaround to problem that restore_print_from_ram_and_continue() did 3s heating pause before resuming print. This problem will be fixed properly in restore_print_from_ram_and_continue() in next commit.

Save 166B of FLASH.
 2019-07-15 17:22:39 +02:00
Marek Bel
6717590631 Merge branch 'MK3' into MK3_LA15 2019-06-13 15:39:50 +02:00
DRracer
aeed49a80e Fix filament runout on optical filament sensors 
Reworked the IR variant accordingly
Some code-size optimization in related functions
 2019-06-05 18:33:41 +02:00
Yuri D'Elia
84009e1e8e Do a full fsensor_update() when initializing the sensor 
This correctly populates the "extruder info" details even when
the menu is entered for the first time after starting a print.
 2019-06-03 17:32:57 +02:00
Yuri D'Elia
d2432056bd Elide fsensor_st_block_begin, saving some cycles/bytes 2019-06-03 17:32:43 +02:00
Yuri D'Elia
5cd0177389 Cleanup fsensor_st_block_begin 2019-06-02 18:17:59 +02:00
Yuri D'Elia
b4bf79297f Remove unneeded includes from fsensor 2019-06-02 01:08:03 +02:00
Yuri D'Elia
c50b1c0351 Rework the filament counter logic 
- Move direction checks out of fsensor: fsensor_counter is now
  always in the same direction as e_steps
- Check the filament chunk after e_steps have been physically done,
  using the real e_step count so far
 2019-06-01 22:08:00 +02:00
DRracer
9cb0bc7bcf Fix MINTEMP errors and fsensor runout 2019-05-24 08:46:44 +02:00
MRprusa3d
20a03d703d G-code unification 
"FSENSOR_RECOVER" ->-> "PRUSA fsensor_recover"
 2019-03-05 13:36:13 +01:00
PavelSindler
9926468c91 Merge remote-tracking branch 'upstream/MK3' into variants 2019-01-30 17:26:45 +01:00
PavelSindler
83510ed489 check_for_ir_sensor 2019-01-28 17:27:16 +01:00
Robert Pelnar
eea755496b Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation. 
Timing functions (millis, micros and delay) replaced in whole source, defined in Marlin.h.
This commit enables original implementation (SYSTEM_TIMER_2 undefined)
Verified with passed complete wizard process.
 2019-01-27 22:48:51 +01:00
PavelSindler
6b1cf99066 conditional compilation updated 2019-01-24 16:14:02 +01:00
PavelSindler
da2c963893 conditional compilation improved: fsensor_autoload_check_stop() and fsensor_autoload_check_start(); M600 "filament not responding" error on printers with ir sensor fixed 2019-01-24 16:00:52 +01:00
PavelSindler
e0c1e4a02d version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus 2019-01-24 01:12:30 +01:00
Robert Pelnar
6157c3ab32 New filament sensor 2018-12-06 15:41:53 +01:00
PavelSindler
0e65790218 removed redundant code 2018-11-21 19:49:19 +01:00
PavelSindler
74a7341005 mmu: FINDA disabled by damaged/disconnected PAT9125 hotfix 2018-11-21 19:27:55 +01:00
Robert Pelnar
d886ba1100 Fix PFW657 - filament runout detection is not working after autoload disabled from menu. 2018-11-13 14:05:15 +01:00
MRprusa3d
fd45dd64dc Bed PowerMonitor III 2018-11-08 03:32:00 +01:00
MRprusa3d
4ae857136d Bed PowerMonitor II 2018-11-07 13:38:39 +01:00
MRprusa3d
18a8ae5b8f Bed PowerMonitor 
bed power monitoring correction
 2018-11-01 20:55:42 +01:00
PavelSindler
a9317b4d36 upstream/MK3 merge 2018-10-25 21:46:32 +02:00
PavelSindler
a6a81c6ea6 mmu2: filament senor (FINDA) can be switched ON/OFF from menu without dependency on pat9125 state 2018-10-25 18:26:26 +02:00
PavelSindler
bd8ca8d652 removed redefinition of functions in fsensor.cpp 2018-10-22 20:51:44 +02:00
PavelSindler
940f436a5f merge MK3_dev into MK3 2018-10-22 20:25:29 +02:00
PavelSindler
866d6758c3
Merge pull request #1243 from mkbel/simplify_EEPROM_M500 
Simplify eeprom m500
 2018-10-10 13:11:17 +02:00
Marek Bel
9dff6431e6 Format fsensor documentation. 2018-10-09 22:33:54 +02:00
Marek Bel
1585dc66b0 Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 
Known limitation: Unable to compile.
 2018-10-08 15:58:49 +02:00
Robert Pelnar
9960c80bf7 Additional check always with enabled oq_meassure 
+ variant files
 2018-10-04 16:12:41 +02:00
Robert Pelnar
f9d8c46802 Enable/disable optical quality meassurement in settings menu 2018-10-04 15:48:28 +02:00
PavelSindler
aefb4e5c09
Merge pull request #1200 from XPila/MK3 
Filament sensor - fix invalid calculation of fsensor_counter in LA st…
 2018-09-27 21:05:33 +02:00
Robert Pelnar
c2f535b619 Filament sensor - fix invalid calculation of fsensor_counter in LA stepper. 
+decreased additional check sensitivity/sctrictness
 2018-09-26 18:59:07 +02:00
PavelSindler
e6a00b8f53 send busy messages when checking for filament presence 2018-09-25 19:14:57 +02:00
Marek Bel
3f28632443 Use cs.axis_steps_per_unit from ConfigurationStore. 2018-09-24 14:54:41 +02:00