PavelSindler
7e3a1c7d45
merge changes from upstream
2019-01-25 17:57:24 +01:00
PavelSindler
0d1a7a1774
Merge pull request #1479 from MRprusa3d/PFW-749
...
SD card menu
2019-01-25 14:32:12 +01:00
Marek Bel
edc412697c
Increase selftest_irsensor() filament nozzle unload temperature to ABS.
...
Resume nozzle temperature immediately after unload.
2019-01-24 21:24:46 +01:00
Marek Bel
68ffa95aa9
Fix axis self-test progress visualization.
2019-01-24 21:06:03 +01:00
Marek Bel
1c4f3259ea
Increase heater check minimum expected temperature rises.
...
Bed increased from 3 to 10 K.
Nozzle increased from 10 to 30 K.
Measured rises with my MK3 printer:
Bed 26K,
Nozzle 73K.
2019-01-24 21:02:04 +01:00
Marek Bel
305598d7f6
Fix bed / nozzle test order and progress bar.
...
Known limitation:
Z progress shown in bed progress.
2019-01-24 20:03:37 +01:00
Marek Bel
22859800f0
Rearrange tests. Move hot end test to the end, to spare time in IR sensor test.
...
Known problems, hot end and bed is swapped. Bed progress indicator is painted to X axis test.
2019-01-24 19:22:36 +01:00
MRprusa3d
b2b65475df
SD card menu
...
SDcard-menu after card insertion
2019-01-24 17:32:57 +01:00
PavelSindler
ad65024147
selftest: filament sensor check change
2019-01-24 13:57:52 +01:00
PavelSindler
e0c1e4a02d
version which should on all printer versions: autoload, selftest, filament detection, filament sensors initialization, filament menus
2019-01-24 01:12:30 +01:00
Marek Bel
1d71c1a5d1
Update IR sensor selftest progress bar more frequently.
2019-01-22 19:02:42 +01:00
Marek Bel
97a4623800
Fix lcd_selftest_screen for small _progress_scale.
2019-01-22 19:01:55 +01:00
Marek Bel
9cda0b69b8
Update IR sensor selftest progress bar.
2019-01-22 18:23:00 +01:00
Marek Bel
3ff8a7c740
Unload filament by MMU unit in selftest_irsensor().
...
Known limitation:
If filament was not loaded to nozzle it is sticked completely out of MMU. To be fixed in MMU, as this problem can be reproduced also from printer menu - unload filament.
2019-01-22 14:54:06 +01:00
Marek Bel
c371a5ea65
Document.
2019-01-22 14:05:08 +01:00
Marek Bel
a92d9c782b
Add IR sensor test.
2019-01-22 11:29:55 +01:00
Marek Bel
f292a6ca7a
Refactor filament sensor selftest call.
2019-01-21 21:39:38 +01:00
PavelSindler
e36e58f385
show sensor on/off temporarily changed to unlocalized strings
2018-12-21 21:28:57 +01:00
PavelSindler
ba57986b72
merge changes from upstream
2018-12-21 20:58:38 +01:00
PavelSindler
5462d451e1
show power failures in fail stats menu, shorter load to nozzle if idler sensor detected
2018-12-21 20:56:45 +01:00
PavelSindler
d292e877df
load to nozzle shortened, sensor menu moved to support
2018-12-21 18:51:13 +01:00
PavelSindler
3c64bad1cb
initial version which works on old and new hw, initial version of idler sensor detection
2018-12-21 17:12:16 +01:00
PavelSindler
b0fce9122e
Merge pull request #1416 from PavelSindler/z_cal_endstops
...
Z cal endstops and stop paused print fix
2018-12-19 19:46:27 +01:00
PavelSindler
40fe52202d
stop paused print fix: saved_printing set to false when doing stop print
2018-12-19 19:20:09 +01:00
PavelSindler
b5430c2968
M600: consume click
2018-12-18 19:10:02 +01:00
PavelSindler
880163dbcb
missing prototypes
2018-12-18 17:38:24 +01:00
PavelSindler
fc5d7e35ef
fail stats mmu function definitions
2018-12-18 17:35:41 +01:00
PavelSindler
11ab5dfd36
fail stats menu for mmu defined for MK2.5 version
2018-12-18 17:33:27 +01:00
PavelSindler
cb1f6d2a0e
show sensor states in calibration menu
2018-12-14 19:43:26 +01:00
PavelSindler
e0bed71801
comments update
2018-12-13 17:01:45 +01:00
PavelSindler
bbba27c15f
idler state menu
2018-12-13 16:53:59 +01:00
PavelSindler
a9829b6a1a
add statistics and idler sensor state
2018-12-13 00:12:00 +01:00
PavelSindler
29ecd4ec7a
duplicit T-codes execution improved, E-stepper movements when waiting for ok from mmu, continue loading function improved, eeprom: fail stats for mmu
2018-12-12 22:32:47 +01:00
PavelSindler
c256af0a1c
unknown filament added; the same T-code will be not executed twice in a row; continue loading
2018-12-12 14:50:55 +01:00
PavelSindler
8af127870d
consume click
2018-12-11 15:59:44 +01:00
PavelSindler
6d6de67c3f
consume click
2018-12-07 18:31:30 +01:00
Robert Pelnar
0ceeba38cb
Lang - text "Copy selected language from XFLASH?" shorted to "Copy selected language?"
2018-11-22 17:32:53 +01:00
Robert Pelnar
37273d9fca
Lang - 'Auto Deplete' changed to 'SpoolJoin'
2018-11-22 17:19:38 +01:00
Robert Pelnar
f0624a9e97
Lang - some not localized texts marked as localized, formating fixed
2018-11-22 14:37:29 +01:00
PavelSindler
32da5bc039
progress bar time counted from feedrate and E - distance
2018-11-12 19:55:53 +01:00
PavelSindler
f4c1e7924f
M600: show progress bar during first filament load
2018-11-12 18:35:06 +01:00
PavelSindler
5931d15566
whitespace
2018-11-09 18:31:28 +01:00
PavelSindler
c991c8b314
resume print fix: wait for heater() never disable steppers
2018-11-09 18:29:35 +01:00
PavelSindler
22cf2c6b6b
M600 load messages synchronization fixed
2018-11-09 15:31:44 +01:00
Marek Bel
02e31433f4
PFW-634 Move T<nr> code just before extrude code to properly load filament in first layer calibration with MMUv2.
2018-11-06 15:46:37 +01:00
PavelSindler
908fffc19a
Merge pull request #1306 from PavelSindler/fsensor_q
...
filament quality measurements disabled
2018-11-05 19:14:34 +01:00
PavelSindler
89ad02ac8c
filament quality measurements disabled
2018-11-05 18:37:36 +01:00
Marek Bel
50f9bf06be
Save 74B of flash memory.
2018-11-05 18:02:46 +01:00
Marek Bel
e95c2ad592
Display auto deplete as not available if filament sensor is disabled.
2018-11-05 17:43:07 +01:00
Marek Bel
ef5be690fb
Add autodeplete setting into tune menu.
2018-11-05 13:54:22 +01:00
PavelSindler
78775e2f87
Merge pull request #1302 from PavelSindler/wizard_improvements
...
Wizard improvements
2018-11-05 10:38:41 +01:00
PavelSindler
688c10247e
Merge pull request #1291 from XPila/MK3-new_bs
...
lang update
2018-11-05 10:38:29 +01:00
PavelSindler
0a2ad97bc6
Merge pull request #1290 from PavelSindler/mmu_improvements
...
mmu improvements: load to nozzle, gcodes for single material mode, M600 fix
2018-11-05 10:38:05 +01:00
PavelSindler
3d24f5437c
leave Z move menu (hotfix)
2018-11-04 23:44:29 +01:00
PavelSindler
daef0eeb67
Merge pull request #1297 from MRprusa3d/PFW-635
...
MeshBed Leveling Fail
2018-11-04 23:33:29 +01:00
mkbel
e177c2b669
Merge pull request #1295 from PavelSindler/feedrate_change
...
choosing filament from T? menu changes feedrate fixed
2018-11-04 23:13:03 +01:00
PavelSindler
8afb83406e
Wizard for assembled printers (contains more steps now)
2018-11-04 23:08:23 +01:00
Robert Pelnar
33a29cd416
Fix PFW638 - remaining/elapsed time >100h displayed in hours
2018-11-04 20:27:09 +01:00
PavelSindler
e2d2fb58aa
Z calibraion: always ask user to clean nozzle
2018-11-04 18:47:08 +01:00
MRprusa3d
73794b56cf
MeshBed Leveling Fail
...
Z-leveling after MeshBed leveling failing
2018-11-02 23:03:14 +01:00
PavelSindler
e304319e15
choosing filament from T? menu changes feedrate fixed
2018-11-02 20:25:24 +01:00
MRprusa3d
18a8ae5b8f
Bed PowerMonitor
...
bed power monitoring correction
2018-11-01 20:55:42 +01:00
PavelSindler
aaf65051f9
M600: "is color clear?" menu synchronization
2018-11-01 18:28:52 +01:00
PavelSindler
96ce324b7c
load to nozzle improved, unified feedrate and E-distance for final feed used in load filament function, M600 etc.
2018-11-01 16:29:09 +01:00
Robert Pelnar
a0e4acead3
lang - removed unused code and some service messages changed to "not translated"
2018-11-01 14:07:16 +01:00
PavelSindler
e80af46503
load to nozzle and Tx and Tc codes: intial version
2018-10-31 21:48:05 +01:00
PavelSindler
a9317b4d36
upstream/MK3 merge
2018-10-25 21:46:32 +02:00
PavelSindler
a6a81c6ea6
mmu2: filament senor (FINDA) can be switched ON/OFF from menu without dependency on pat9125 state
2018-10-25 18:26:26 +02:00
PavelSindler
940f436a5f
merge MK3_dev into MK3
2018-10-22 20:25:29 +02:00
Marek Bel
1585dc66b0
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
...
Known limitation: Unable to compile.
2018-10-08 15:58:49 +02:00
Robert Pelnar
f9d8c46802
Enable/disable optical quality meassurement in settings menu
2018-10-04 15:48:28 +02:00
Robert Pelnar
e50025cc7d
static_assert - portable solution compatible with C++98
2018-09-27 19:59:29 +02:00
Marek Bel
3f28632443
Use cs.axis_steps_per_unit from ConfigurationStore.
2018-09-24 14:54:41 +02:00
Marek Bel
2607a0c4ed
Update documentation.
2018-09-19 17:22:06 +02:00
Marek Bel
b92b307ee8
Make variables constant.
2018-09-19 17:21:45 +02:00
Marek Bel
cce8131070
Add missing s for seconds of print time.
2018-09-19 17:20:41 +02:00
Marek Bel
b5bb40474d
Fix print time overflow.
2018-09-19 17:17:32 +02:00
PavelSindler
96aada9061
load filament messages, czech language missing translation readded
2018-09-11 18:25:38 +02:00
PavelSindler
25a46557d1
merge with upstream
2018-09-10 22:11:32 +02:00
PavelSindler
8a9f066c1b
choose_extruder_menu: extruder -> filament
2018-09-10 22:09:37 +02:00
PavelSindler
6fa798aa83
init
2018-09-10 20:08:13 +02:00
PavelSindler
1253fb338a
wizard hotfix
2018-09-10 18:02:54 +02:00
Marek Bel
5a6ef00cfc
Do not unload filament from nozzle when touching bed in the end of first layer calibration. Unload it after reaching home position.
2018-09-07 10:50:23 +02:00
MRprusa3d
35cf3f3a61
Time info
...
suffix for doubt time estimation (i.e. if feed rate changed)
2018-09-04 14:39:46 +02:00
Marek Bel
12b1769531
Fix printer reset when changing filament during print over USB.
2018-08-30 16:02:13 +02:00
MRprusa3d
25a22120fb
1-st Layer Calibration correction
...
filament loading improvement
2018-08-30 03:32:33 +02:00
PavelSindler
515e78cfd1
Eject filament feature in menu, M600: if it was envoked by FINDA, eject filament
2018-08-29 01:58:28 +02:00
PavelSindler
b9808354c4
Merge remote-tracking branch 'upstream/MK3' into M600_change_extruder
2018-08-28 23:53:35 +02:00
PavelSindler
705f098b1c
eject filament: initial version
2018-08-28 23:50:31 +02:00
MRprusa3d
d3869bd857
Z-endstop @ MK3
...
add show P.I.N.D.A. state menu item @ CalibrationMenu
2018-08-28 16:12:59 +02:00
PavelSindler
3e2cb72695
Merge branch 'MK3' into auto_deplete_2
2018-08-28 11:01:30 +02:00
Marek Bel
72cd0d26f9
Increase scope of code disabled by macro TMC2130 to whole lcd_settings_linearity_correction_menu.
2018-08-27 21:08:40 +02:00
Marek Bel
b08ae95568
Rename autoDeplete to lcd_autoDeplete and make it global. When filament runs out, call M600 AUTO if lcd_autoDeplete is enabled. Shorten finda polling period to 300 ms.
2018-08-27 19:36:54 +02:00
Marek Bel
1cdb7a48cb
Show auto deplete only when mmu unit present.
2018-08-27 16:24:21 +02:00
Marek Bel
8279aba4d7
Add auto deplete setting.
2018-08-27 16:15:46 +02:00
Marek Bel
f02b0d80e3
Split settings menu into separate macros.
2018-08-27 15:48:09 +02:00
PavelSindler
2b32b41969
MK2.5 build error hotfix
2018-08-27 05:53:39 +02:00
PavelSindler
168bc74102
Merge pull request #1075 from PavelSindler/mmu_filament_sensor
...
Mmu filament sensor
2018-08-27 05:26:12 +02:00
PavelSindler
03fffae4c3
finda runout sensor can be turned on/off from menu
2018-08-27 05:20:42 +02:00
PavelSindler
c57fdb11b7
show active extruder: numbers corrected
2018-08-26 14:22:52 +02:00
