Robert Pelnar
aee62750e7
Build 109
2017-11-16 22:03:36 +01:00
XPila
279ea79bf6
Merge pull request #86 from PavelSindler/keepalive_messages
...
host keep alive messages
2017-11-16 20:53:09 +01:00
Robert Pelnar
ee2f927148
Build Number = 108
...
FSensor log can be enabled with D9125L1
Selftest menu
PINDA D codes
2017-11-16 20:51:50 +01:00
PavelSindler
91d125369e
keepalive messages initial version
2017-11-15 15:09:29 +01:00
XPila
dfe3541d2b
Merge branch 'MK3' into MK3
2017-11-13 18:48:19 +01:00
Robert Pelnar
01de834e0d
SG_THR_X = 2, holding currents == running currents
...
Farm preheat menu
dcode D5 - read/write/erase FLASH
dcode D6 - bootloader update test (for new stk500-prusa)
_NO_ASM - MINGW simulator support
fixed bug - "Fil. sensor [on/off]" menu
Build number = 107
2017-11-13 18:45:11 +01:00
PavelSindler
5707f8b14e
Merge remote-tracking branch 'upstream/MK3' into wizard
2017-11-13 14:39:14 +01:00
michalprusa
1e81861e0c
Configuration files reordered and added build number
2017-11-07 23:54:06 +01:00
XPila
55325a5a32
Merge branch 'MK3' into MK3
2017-11-07 17:15:27 +01:00
PavelSindler
2e68770e62
initial version - messages missing (will not compile)
2017-11-07 16:49:04 +01:00
Robert Pelnar
877c8a3978
TMC2130 configuration in eeprom (not finished).
...
Extruder and Z holding currents same as running currents.
M600 filament unload speed = 3500 (PFW-22).
FSensor - algorithm changed (reset error couter instead of decrement)
build number = 106
2017-10-30 15:45:29 +01:00
PavelSindler
1ee6016fa0
Merge remote-tracking branch 'upstream/MK3' into 4point_xyz_cal
2017-10-30 11:48:45 +01:00
Robert Pelnar
0607086e14
Build number = 105
2017-10-27 16:38:12 +02:00
PavelSindler
c4d7b801b9
Initial version. XYZ cal works, but bed ref. points coordinates must be checked.
2017-10-27 16:12:37 +02:00
Robert Pelnar
45d6baa757
setup second serial port only in case it is selected
...
build number = 104
2017-10-24 23:20:48 +02:00
Robert Pelnar
cddb0eafb8
PAT9125 - sampled only Y value, new debug code D9125.
...
FSensor - synchronous sampling and new algorithm
build number = 103
2017-10-24 19:45:15 +02:00
Robert Pelnar
8734961e0e
M114 now reports also actual extruder position,
...
PAT9125 HWI2C (Wire) support,
fsensor implementation into separate file
build number = 102
2017-10-22 22:42:45 +02:00
michalprusa
84bdc6c0e6
Merge remote-tracking branch 'origin/MK3' into MK3
2017-10-18 15:36:31 +02:00
Robert Pelnar
66c19b874d
Extruder settings tunning ( http://jira.prusa/projects/PFW/issues/PFW-5 )
...
buildnumber increased to 101
2017-10-17 21:24:11 +02:00
Robert Pelnar
6a0f8752c3
Endless loop after calibration Z ( http://jira.prusa/projects/PFW/issues/PFW-3?filter=allissues )
...
Buildnumber (http://jira.prusa/projects/PFW/issues/PFW-4?filter=allissues )
2017-10-17 21:05:31 +02:00
Robert Pelnar
cc9f03a46f
Line endings to LF (./le.sh lf)
2017-10-03 13:01:59 +02:00
michalprusa
c3585bc696
Automatic recovery typo fix
...
Failures statistics in eeprom
2017-09-26 14:14:17 +01:00
Robert Pelnar
89121e6e34
Maker Faire brainstorm 2.0
...
Added filament sensor and crash detection to EEPROM
Added crash-detection counters display disable directive
Added Restore/Save print directive
Added crash detection and filament sensor settings to Tune menu
2017-09-26 04:30:10 +02:00
Robert Pelnar
480838a0a1
Fixed homing (mbl and babystep - crashdetection recovery work fine now).
2017-09-23 16:35:01 +02:00
PavelSindler
6eb57da770
fan check can be turned off from support menu, saving parameters to eeprom with offset and different levels, fan kickstart,2nd heatbed version, fans check modified
2017-09-21 15:20:02 +02:00
Robert Pelnar
8ec316773f
PINDA thermistor and ambient thermistor.
2017-09-05 14:02:35 +02:00
Robert Pelnar
f563618b1c
PINDA thermistor + extruder current adjust.
2017-08-30 21:56:48 +02:00
Robert Pelnar
683784c4c7
PAT9125 I2C, hardware SG homing
...
separate pin configuration file for each board
changed board codes:
RAMBO =100, MiniRambo1.0 =200, MiniRambo1.3 = 203, Einy03 =303, Einy04 =304
2017-08-17 15:23:34 +02:00
Robert Pelnar
a7477673de
HW SG homing, SWSPI pins for EINY03/04
2017-07-18 13:54:01 +02:00
XPila
78f7923ab2
Merge pull request #10 from XPila/MK3
...
Changed jerks, disabled oversampling, debug code, commands for seting…
2017-07-06 13:07:37 +02:00
Robert Pelnar
2b24e9ceb3
Changed jerks, disabled oversampling, debug code, commands for seting pwm_ampl and pwm_grad (M917, M918), changed configuration files
2017-07-06 13:06:07 +02:00
XPila
458dfa80f6
Merge branch 'MK3' into MK3
2017-07-06 12:55:30 +02:00
PavelSindler
16fffed52d
current feedrate and fan speed stored to eeprom in power panic, number of blocks (linear movements) in planner serve for counting SD card recover position, print fan speed error limit prolonged to 15s
2017-07-05 15:04:43 +02:00
Robert Pelnar
b8025e63e6
DEBUG defines, variant files for MK3
2017-07-04 16:23:28 +02:00
PavelSindler
a8678cb2fd
recover print
2017-07-04 11:31:39 +02:00
PavelSindler
d05e62813a
Merge remote-tracking branch 'upstream/MK3' into MK3
...
sync with upstream
2017-07-03 14:08:39 +02:00
Robert Pelnar
e09f0c64c7
TMC2130 tuning, silent/high power mode
2017-07-03 07:43:50 +02:00
PavelSindler
17074e1d25
saving/restoring filename and current position in bytes to eeprom, UVLO changed
2017-07-02 21:01:23 +02:00
PavelSindler
ae0c64248f
sync with upstream
2017-07-01 19:29:57 +02:00
PavelSindler
c4be651d2b
uvlo initial version
2017-07-01 18:51:02 +02:00
Robert Pelnar
4f9a8147a4
renamed EINY 0.1a to EINY 0.3a
...
added EINY 0.4a
changed jerk (optimized for MK3 silent mode)
2017-07-01 17:28:32 +02:00
Robert Pelnar
f6a8e1df9d
TMC2130 + software SG homing + LF lineendings + tmc2130 debug M-Codes
...
M910 - tmc2130_init
M911 - set holding currents
M912 - set running currents
M913 - print currents
2017-07-01 12:39:16 +02:00
PavelSindler
43d696659f
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
michalprusa
21177476ac
StallGuard homing implemented, working
2017-06-17 16:58:36 +02:00
michalprusa
3e642d61cb
Stepper Y inverted, current lowered.
2017-06-17 15:58:26 +02:00
michalprusa
cabaec95c8
EINY implementation
2017-03-24 20:16:03 +01:00
michalprusa
3faef75a0d
3.0.10 sync
2017-03-24 19:47:50 +01:00
bubnikv
99ae9707de
Fixed a missing SD card error on start up, if the setup was blocked
...
by some dialog for an extended period of time.
Increased version to 3.0.8 final.
2016-09-01 16:52:46 +02:00
bubnikv
b470e103dc
Reset live adjust on XYZ calibration.
...
Disable timeouts in the XYZ/Z calibration.
Don't modify feed rate multiplier during the XYZ/Z calibration.
Support multi screen messages in the XYZ/Z calibration - "move the Z carriages up" step.
Support up to three lines in the XYZ/Z calibration messages.
Added a new message "Measuring reference height of calibration point xx of 9".
Changed the "move the Z carriages up" message to suggest rotating the knob.
Changed the "live adjust not set" message to reference the manual chapter and section.
Remove debugging serial line output on Z calibration.
2016-09-01 10:44:24 +02:00
bubnikv
26405ee16f
Syncing with 3.0.7 public
2016-08-31 17:12:05 +02:00
