Voinea Dragos
542677c080
Prevent switching to serial port 1 on miniRambo and such
2021-01-19 13:11:48 +02:00
Voinea Dragos
9b847715ac
Rename F0 to FRM on the status screen
2021-01-19 13:11:25 +02:00
Voinea Dragos
3f5cfc4e61
Move the change filament button to the main menu when farm printing
...
PFW-945
2021-01-19 13:06:23 +02:00
D.R.racer
a9d8ddc89c
Farmers' requests 1
...
- remove the UI and related stuff to setting a farm number (the
communication protocol must remain intact)
- remove confirmation after print finished ("Print OK")
Both requests are highly welcome, since they allow for lowering the code
size by >1KB
PFW-963, PFW-927
2021-01-19 09:58:02 +01:00
3d-gussner
9264454d3a
Gcode M123 only if FANCHECK and TACHOs are defined
...
Gcode `M155` added parameter "C" to activate auto-report for temperatures, fans and positions
Updated doxygen
@todo Update RepRap Wiki
@todo improve code
2021-01-19 09:01:46 +01:00
espr14
735895c6bc
Use fabs
2021-01-14 16:38:34 +01:00
espr14
ca4e638ea2
Don't use extrusion in XYZ calibration
2021-01-14 13:19:30 +01:00
Alex Voinea
20c3f4cb77
Update comments
2021-01-14 12:53:12 +02:00
Voinea Dragos
dea3f23a69
PRUSA SN in eeprom
2021-01-14 11:52:22 +02:00
espr14
9867ecd3f9
Reduce unnecessary code
2021-01-13 13:59:20 +01:00
espr14
21d6f970ef
Fix build
2021-01-12 16:26:46 +01:00
espr14
f3faf651c5
Move down before scanning
2021-01-12 16:12:34 +01:00
espr14
9dceb488b6
Revert double scanning
2021-01-12 16:04:04 +01:00
DRracer
b71f1be37a
Merge pull request #2957 from wavexx/remove_stray_newline
...
Remove stray serial newlines in fsensor autoload messages
2021-01-12 14:46:08 +01:00
espr14
546812294e
Clean serial output
2021-01-12 00:34:28 +01:00
espr14
d7507649d8
Remove degree char
2021-01-12 00:28:46 +01:00
espr14
180af46fe4
Try double height
2021-01-12 00:27:06 +01:00
espr14
333526f65d
Single skew output
2021-01-11 23:14:12 +01:00
espr14
e6e44fe188
Convert to degrees
2021-01-11 23:13:08 +01:00
espr14
b8443b00ad
Reverse reverse
2021-01-11 22:18:50 +01:00
espr14
09892bec52
Reverse
2021-01-11 18:46:56 +01:00
Yuri D'Elia
78f8f1e8f9
Remove stray serial newlines in fsensor autoload messages
2021-01-11 18:31:36 +01:00
espr14
211e5f5f37
Define DBG output
2021-01-11 17:31:26 +01:00
espr14
904a23b69e
Report calibration results
2021-01-11 17:02:41 +01:00
espr14
2e40a27460
Alignment, comments
2021-01-11 15:40:12 +01:00
DRracer
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating
...
Raise Z while preheating when auto/[un]loading the filament
2021-01-11 07:45:54 +01:00
DRracer
1a6b6fb491
Merge pull request #1776 from wavexx/unused_tmc_defines
...
Remove an unused define
2021-01-11 07:43:44 +01:00
DRracer
ef51652e39
Merge pull request #1758 from wavexx/disable_filament_checks_in_extr_menu
...
Disable filament checks inside the Move -> Extruder menu
2021-01-11 07:42:25 +01:00
3d-gussner
a064ce4722
Add gcode M123 Tachometer value
2021-01-10 15:15:44 +01:00
D.R.racer
8a083c9970
Add PVB preheat and 0.8mm nozzle presets
...
minor features reflecting the latest announcement
Needs some 300B of CPU flash though, after 3.9.3 we need to optimize code
size again.
2021-01-08 13:52:39 +01:00
DRracer
5c3513a6cc
Merge pull request #2397 from odaki/flashair_display_ip
...
Show the FlashAir IP address
2021-01-08 12:20:12 +01:00
DRracer
f1f4db0a35
Merge pull request #2850 from 3d-gussner/MK3_PF-build_Fix_EN_ONLY
...
🐛 Fix: PF-build EN_ONLY argument
2021-01-08 12:15:36 +01:00
3d-gussner
67ff9b6b48
Fix typos
2021-01-08 11:01:17 +01:00
3d-gussner
007e59d23c
Comment out 'sudo' auto installation
...
Add '-?' '-h' help output
2021-01-08 11:37:47 +01:00
espr14
584177e8fd
Fix E mask
2021-01-08 10:24:36 +01:00
DRracer
f549ce690a
Merge pull request #2949 from prusa3d/MK3_3.9.3
...
Merge 3.9.3 back into MK3
2021-01-08 10:20:40 +01:00
3d-gussner
3329d34ce4
Fix doxygen issue with "^" and "|" only in one line
...
Doxygen 1.8.13 had no issues but newer doxygen version are failing
to build tables, if a line only consists of "^" and "|"
2021-01-08 09:40:13 +01:00
Mesa Komarevich
2764b94558
Updated the dos2unix instructions to no longer be specific to Debian, as unix based distro's being able to handle windows line endings should be considered an exception, and not the rule. Also fixed a few spelling mistakes in the README.
2021-01-08 09:03:33 +01:00
Mesa Komarevich
f7dbc70b9c
Added some specific instructions for building firmware with a Debian WSL install. Updated commands to use sudo to avoid permission errors.
2021-01-08 09:03:33 +01:00
DRracer
0ed6b537a8
Merge branch 'MK3' into MK3_3.9.3
2021-01-07 13:27:51 +01:00
D.R.racer
603d704178
Version changed (3.9.3 build 3556)
2021-01-07 12:50:58 +01:00
espr14
2981b9e9c5
OctoPrint needs new lines
2021-01-04 14:59:12 +01:00
espr14
cc9e7b9376
Fix comments, remove unused
2021-01-04 13:01:06 +01:00
espr14
49d57ed621
Median dynamic circle
2020-12-30 17:02:31 +01:00
espr14
a9fd09ca3f
Implement median
2020-12-30 15:15:17 +01:00
espr14
13fefaa1bf
Fix typo
2020-12-30 15:01:32 +01:00
espr14
03b87ae68b
Add 8 pixel circle pattern
2020-12-30 13:08:47 +01:00
espr14
c14e725574
Fix moves
2020-12-29 18:27:33 +01:00
espr14
c2ab8785f4
Revert Manhattan
2020-12-29 17:31:34 +01:00
espr14
c1e6567461
Fix step axis coding
2020-12-29 17:17:32 +01:00
