# Translation of Prusa-Firmware into Luxembourgish. # msgid "" msgstr "" "Project-Id-Version: Prusa-Firmware\n" "POT-Creation-Date: Wed 16 Mar 2022 09:29:04 AM CET\n" "PO-Revision-Date: Wed 16 Mar 2022 09:29:04 AM CET\n" "Last-Translator: \n" "Language-Team: \n" "Language: lb\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Poedit 2.0.7\n" "X-Poedit-SourceCharset: UTF-8\n" "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" #. MSG_IR_03_OR_OLDER c=18 #: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161 msgid " 0.3 or older" msgstr "" #. MSG_IR_04_OR_NEWER c=18 #: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160 msgid " 0.4 or newer" msgstr "" #. MSG_SELFTEST_FS_LEVEL c=20 #: ../../Firmware/ultralcd.cpp:7036 msgid "%s level expected" msgstr "" #. MSG_CANCEL c=10 #: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1968 #: ../../Firmware/ultralcd.cpp:3835 msgid ">Cancel" msgstr "" #. MSG_BABYSTEPPING_Z c=15 #. Beware: must include the ':' as its last character #: ../../Firmware/ultralcd.cpp:2670 msgid "Adjusting Z:" msgstr "" #. MSG_SELFTEST_CHECK_ALLCORRECT c=20 #: ../../Firmware/ultralcd.cpp:7313 msgid "All correct" msgstr "" #. MSG_WIZARD_DONE c=20 r=3 #: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4171 #: ../../Firmware/ultralcd.cpp:4180 msgid "All is done. Happy printing!" msgstr "" #. MSG_SORT_ALPHA c=8 #: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4404 msgid "Alphabet" msgstr "" #. MSG_ALWAYS c=6 #: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4308 msgid "Always" msgstr "" #. MSG_AMBIENT c=14 #: ../../Firmware/ultralcd.cpp:1405 msgid "Ambient" msgstr "" #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 #: ../../Firmware/ultralcd.cpp:2983 msgid "Are left and right Z~carriages all up?" msgstr "" #. MSG_SOUND_BLIND c=7 #: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4459 msgid "Assist" msgstr "" #. MSG_AUTO c=6 #: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5864 msgid "Auto" msgstr "" #. MSG_AUTO_HOME c=18 #: ../../Firmware/Marlin_main.cpp:3271 ../../Firmware/messages.cpp:9 #: ../../Firmware/ultralcd.cpp:4900 msgid "Auto home" msgstr "" #. MSG_AUTO_POWER c=10 #: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4364 #: ../../Firmware/ultralcd.cpp:5779 msgid "Auto power" msgstr "" #. MSG_AUTOLOAD_FILAMENT c=18 #: ../../Firmware/ultralcd.cpp:5572 msgid "AutoLoad filament" msgstr "" #. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4 #: ../../Firmware/ultralcd.cpp:3549 msgid "" "Autoloading filament available only when filament sensor is turned on..." msgstr "" #. MSG_AUTOLOADING_ENABLED c=20 r=4 #: ../../Firmware/ultralcd.cpp:2301 msgid "" "Autoloading filament is active, just press the knob and insert filament..." msgstr "" #. MSG_SELFTEST_AXIS c=16 #: ../../Firmware/ultralcd.cpp:7015 msgid "Axis" msgstr "" #. MSG_SELFTEST_AXIS_LENGTH c=20 #: ../../Firmware/ultralcd.cpp:7014 msgid "Axis length" msgstr "" #. MSG_BACK c=18 #: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2751 #: ../../Firmware/ultralcd.cpp:5861 ../../Firmware/ultralcd.cpp:7838 msgid "Back" msgstr "" #. MSG_BED c=13 #: ../../Firmware/Marlin_main.cpp:2051 ../../Firmware/Marlin_main.cpp:4767 #: ../../Firmware/Marlin_main.cpp:4819 ../../Firmware/messages.cpp:12 #: ../../Firmware/ultralcd.cpp:1403 ../../Firmware/ultralcd.cpp:5721 #: ../../Firmware/ultralcd.cpp:5891 msgid "Bed" msgstr "" #. MSG_BED_HEATING c=20 #: ../../Firmware/Marlin_main.cpp:6260 ../../Firmware/messages.cpp:14 #: ../../Firmware/ultralcd.cpp:575 msgid "Bed Heating" msgstr "" #. MSG_BED_DONE c=20 #: ../../Firmware/Marlin_main.cpp:6298 ../../Firmware/messages.cpp:13 #: ../../Firmware/ultralcd.cpp:578 msgid "Bed done" msgstr "" #. MSG_BED_CORRECTION_MENU c=18 #: ../../Firmware/ultralcd.cpp:4912 msgid "Bed level correct" msgstr "" #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6 #: ../../Firmware/Marlin_main.cpp:2214 ../../Firmware/Marlin_main.cpp:2993 #: ../../Firmware/Marlin_main.cpp:3003 #: ../../Firmware/mesh_bed_calibration.cpp:2862 #: ../../Firmware/mesh_bed_calibration.cpp:2870 #: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15 msgid "" "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for " "reset." msgstr "" #. MSG_SELFTEST_BEDHEATER c=20 #: ../../Firmware/ultralcd.cpp:6972 msgid "Bed/Heater" msgstr "" #. MSG_BELT_STATUS c=18 #: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1458 #: ../../Firmware/ultralcd.cpp:1726 msgid "Belt status" msgstr "" #. MSG_BELTTEST c=18 #: ../../Firmware/ultralcd.cpp:4902 msgid "Belt test" msgstr "" #. MSG_RECOVER_PRINT c=20 r=2 #: ../../Firmware/Marlin_main.cpp:1607 ../../Firmware/Marlin_main.cpp:1629 #: ../../Firmware/messages.cpp:77 msgid "Blackout occurred. Recover print?" msgstr "" #. MSG_BRIGHT c=6 #: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5864 msgid "Bright" msgstr "" #. MSG_BRIGHTNESS c=18 #: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4850 #: ../../Firmware/ultralcd.cpp:5789 msgid "Brightness" msgstr "" #. MSG_CALIBRATE_BED c=18 #: ../../Firmware/ultralcd.cpp:4906 msgid "Calibrate XYZ" msgstr "" #. MSG_HOMEYZ c=18 #: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4908 msgid "Calibrate Z" msgstr "" #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8 #: ../../Firmware/ultralcd.cpp:2946 msgid "" "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end " "stoppers. Click when done." msgstr "" #. MSG_CALIBRATE_Z_AUTO c=20 r=2 #: ../../Firmware/Marlin_main.cpp:2170 ../../Firmware/messages.cpp:19 #: ../../Firmware/ultralcd.cpp:623 msgid "Calibrating Z" msgstr "" #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8 #: ../../Firmware/ultralcd.cpp:2945 msgid "" "Calibrating Z. Rotate the knob to move the Z carriage up to the end " "stoppers. Click when done." msgstr "" #. MSG_CALIBRATING_HOME c=20 #: ../../Firmware/ultralcd.cpp:7315 msgid "Calibrating home" msgstr "" #. MSG_CALIBRATION c=18 #: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5581 msgid "Calibration" msgstr "" #. MSG_HOMEYZ_DONE c=20 #: ../../Firmware/ultralcd.cpp:635 msgid "Calibration done" msgstr "" #. MSG_SD_REMOVED c=20 #: ../../Firmware/ultralcd.cpp:7712 msgid "Card removed" msgstr "" #. MSG_CNG_SDCARD c=18 #: ../../Firmware/ultralcd.cpp:5538 msgid "Change SD card" msgstr "" #. MSG_FILAMENTCHANGE c=18 #: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5497 #: ../../Firmware/ultralcd.cpp:5730 msgid "Change filament" msgstr "" #. MSG_CHANGE_SUCCESS c=20 #: ../../Firmware/ultralcd.cpp:2163 msgid "Change success!" msgstr "" #. MSG_CORRECTLY c=20 #: ../../Firmware/ultralcd.cpp:2215 msgid "Changed correctly?" msgstr "" #. MSG_CHECKING_X c=20 #: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6178 #: ../../Firmware/ultralcd.cpp:7305 msgid "Checking X axis" msgstr "" #. MSG_CHECKING_Y c=20 #: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6187 #: ../../Firmware/ultralcd.cpp:7306 msgid "Checking Y axis" msgstr "" #. MSG_SELFTEST_CHECK_Z c=20 #: ../../Firmware/ultralcd.cpp:7307 msgid "Checking Z axis" msgstr "" #. MSG_SELFTEST_CHECK_BED c=20 #: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7308 msgid "Checking bed" msgstr "" #. MSG_SELFTEST_CHECK_ENDSTOPS c=20 #: ../../Firmware/ultralcd.cpp:7304 msgid "Checking endstops" msgstr "" #. MSG_CHECKING_FILE c=17 #: ../../Firmware/ultralcd.cpp:7403 msgid "Checking file" msgstr "" #. MSG_SELFTEST_CHECK_HOTEND c=20 #: ../../Firmware/ultralcd.cpp:7310 msgid "Checking hotend" msgstr "" #. MSG_SELFTEST_CHECK_FSENSOR c=20 #: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7311 #: ../../Firmware/ultralcd.cpp:7312 msgid "Checking sensors" msgstr "" #. MSG_CHECKS c=18 #: ../../Firmware/ultralcd.cpp:4765 msgid "Checks" msgstr "" #. MSG_NOT_COLOR c=19 #: ../../Firmware/ultralcd.cpp:2218 msgid "Color not correct" msgstr "" #. MSG_COMMUNITY_MADE c=18 #: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3725 msgid "Community made" msgstr "" #. MSG_CONTINUE_SHORT c=5 #: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4704 msgid "Cont." msgstr "" #. MSG_COOLDOWN c=18 #: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2125 msgid "Cooldown" msgstr "" #. MSG_COPY_SEL_LANG c=20 r=3 #: ../../Firmware/ultralcd.cpp:3663 msgid "Copy selected language?" msgstr "" #. MSG_CRASH c=7 #: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1221 #: ../../Firmware/ultralcd.cpp:1262 ../../Firmware/ultralcd.cpp:1272 msgid "Crash" msgstr "" #. MSG_CRASHDETECT c=13 #: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4341 #: ../../Firmware/ultralcd.cpp:4342 ../../Firmware/ultralcd.cpp:4344 #: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5767 #: ../../Firmware/ultralcd.cpp:5771 msgid "Crash det." msgstr "" #. MSG_CRASH_DETECTED c=20 #: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27 msgid "Crash detected." msgstr "" #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4 #: ../../Firmware/ultralcd.cpp:3521 msgid "" "Crash detection can\n" "be turned on only in\n" "Normal mode" msgstr "" #. MSG_CUT_FILAMENT c=17 #: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5175 #: ../../Firmware/ultralcd.cpp:5567 msgid "Cut filament" msgstr "" #. MSG_CUTTER c=9 #: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4303 #: ../../Firmware/ultralcd.cpp:4308 ../../Firmware/ultralcd.cpp:4313 msgid "Cutter" msgstr "" #. MSG_MMU_CUTTING_FIL c=18 #: ../../Firmware/mmu.cpp:1048 msgid "Cutting filament" msgstr "" #. MSG_DATE c=17 #: ../../Firmware/ultralcd.cpp:1668 msgid "Date:" msgstr "" #. MSG_DIM c=6 #: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5864 msgid "Dim" msgstr "" #. MSG_DISABLE_STEPPERS c=18 #: ../../Firmware/ultralcd.cpp:4802 msgid "Disable steppers" msgstr "" #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12 #: ../../Firmware/Marlin_main.cpp:1552 ../../Firmware/Marlin_main.cpp:3411 #: ../../Firmware/messages.cpp:11 msgid "" "Distance between tip of the nozzle and the bed surface has not been set yet. " "Please follow the manual, chapter First steps, section First layer " "calibration." msgstr "" #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7 #: ../../Firmware/ultralcd.cpp:4145 msgid "" "Do you want to repeat last step to readjust distance between nozzle and " "heatbed?" msgstr "" #. MSG_EXTRUDER_CORRECTION c=13 #: ../../Firmware/ultralcd.cpp:4214 msgid "E-correct:" msgstr "" #. MSG_ERROR c=10 #: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2279 msgid "ERROR:" msgstr "" #. MSG_FSENS_NOT_RESPONDING c=20 r=4 #: ../../Firmware/ultralcd.cpp:3562 msgid "ERROR: Filament sensor is not responding, please check connection." msgstr "" #. MSG_EJECT_FILAMENT c=17 #: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5156 #: ../../Firmware/ultralcd.cpp:5565 msgid "Eject filament" msgstr "" #. MSG_EJECTING_FILAMENT c=20 #: ../../Firmware/mmu.cpp:1076 msgid "Ejecting filament" msgstr "" #. MSG_SELFTEST_ENDSTOP c=16 #: ../../Firmware/ultralcd.cpp:6985 msgid "Endstop" msgstr "" #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20 #: ../../Firmware/ultralcd.cpp:6990 msgid "Endstop not hit" msgstr "" #. MSG_SELFTEST_ENDSTOPS c=20 #: ../../Firmware/ultralcd.cpp:6976 msgid "Endstops" msgstr "" #. MSG_EXTRUDER c=17 #: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:30 #: ../../Firmware/ultralcd.cpp:3495 msgid "Extruder" msgstr "" #. MSG_EXTRUDER_FAN_SPEED c=16 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1126 #: ../../Firmware/ultralcd.cpp:7321 msgid "Extruder fan:" msgstr "" #. MSG_INFO_EXTRUDER c=18 #: ../../Firmware/ultralcd.cpp:1722 msgid "Extruder info" msgstr "" #. MSG_FSENSOR_AUTOLOAD c=13 #: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229 #: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4248 #: ../../Firmware/ultralcd.cpp:4250 msgid "F. autoload" msgstr "" #. MSG_FS_ACTION c=10 #: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4704 #: ../../Firmware/ultralcd.cpp:4707 msgid "FS Action" msgstr "" #. MSG_FS_V_03_OR_OLDER c=18 #: ../../Firmware/Marlin_main.cpp:9485 msgid "FS v0.3 or older" msgstr "" #. MSG_FS_V_04_OR_NEWER c=18 #: ../../Firmware/Marlin_main.cpp:9477 msgid "FS v0.4 or newer" msgstr "" #. MSG_FAIL_STATS c=18 #: ../../Firmware/ultralcd.cpp:5589 msgid "Fail stats" msgstr "" #. MSG_MMU_FAIL_STATS c=18 #: ../../Firmware/ultralcd.cpp:5592 msgid "Fail stats MMU" msgstr "" #. MSG_FALSE_TRIGGERING c=20 #: ../../Firmware/ultralcd.cpp:7031 msgid "False triggering" msgstr "" #. MSG_FAN_SPEED c=14 #: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5723 #: ../../Firmware/ultralcd.cpp:5893 msgid "Fan speed" msgstr "" #. MSG_SELFTEST_FAN c=20 #: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7143 #: ../../Firmware/ultralcd.cpp:7301 ../../Firmware/ultralcd.cpp:7302 #: ../../Firmware/ultralcd.cpp:7303 msgid "Fan test" msgstr "" #. MSG_FANS_CHECK c=13 #: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4811 #: ../../Firmware/ultralcd.cpp:5756 msgid "Fans check" msgstr "" #. MSG_FIL_RUNOUTS c=15 #: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1220 #: ../../Firmware/ultralcd.cpp:1261 ../../Firmware/ultralcd.cpp:1327 #: ../../Firmware/ultralcd.cpp:1329 msgid "Fil. runouts" msgstr "" #. MSG_FSENSOR c=12 #: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3451 #: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4234 #: ../../Firmware/ultralcd.cpp:4244 ../../Firmware/ultralcd.cpp:5737 #: ../../Firmware/ultralcd.cpp:5741 ../../Firmware/ultralcd.cpp:5745 msgid "Fil. sensor" msgstr "" #. MSG_FILAMENT c=17 #: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604 #: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3835 msgid "Filament" msgstr "" #. MSG_FILAMENT_CLEAN c=20 r=2 #: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2287 #: ../../Firmware/ultralcd.cpp:2293 msgid "Filament extruding & with correct color?" msgstr "" #. MSG_NOT_LOADED c=19 #: ../../Firmware/ultralcd.cpp:2217 msgid "Filament not loaded" msgstr "" #. MSG_SELFTEST_FILAMENT_SENSOR c=17 #: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7026 #: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7034 #: ../../Firmware/ultralcd.cpp:7330 msgid "Filament sensor" msgstr "" #. MSG_FILAMENT_USED c=19 #: ../../Firmware/ultralcd.cpp:2365 msgid "Filament used" msgstr "" #. MSG_FILE_INCOMPLETE c=20 r=3 #: ../../Firmware/ultralcd.cpp:7461 msgid "File incomplete. Continue anyway?" msgstr "" #. MSG_FINISHING_MOVEMENTS c=20 #: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5314 #: ../../Firmware/ultralcd.cpp:5630 msgid "Finishing movements" msgstr "" #. MSG_V2_CALIBRATION c=18 #: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4898 #: ../../Firmware/ultralcd.cpp:5424 msgid "First layer cal." msgstr "" #. MSG_WIZARD_SELFTEST c=20 r=8 #: ../../Firmware/ultralcd.cpp:4066 msgid "First, I will run the selftest to check most common assembly problems." msgstr "" #. MSG_MMU_FIX_ISSUE c=20 r=4 #: ../../Firmware/mmu.cpp:728 msgid "Fix the issue and then press button on MMU unit." msgstr "" #. MSG_FLOW c=15 #: ../../Firmware/ultralcd.cpp:5724 msgid "Flow" msgstr "" #. MSG_SELFTEST_PART_FAN c=20 #: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:6996 #: ../../Firmware/ultralcd.cpp:7149 ../../Firmware/ultralcd.cpp:7154 msgid "Front print fan?" msgstr "" #. MSG_BED_CORRECTION_FRONT c=14 #: ../../Firmware/ultralcd.cpp:2754 msgid "Front side[μm]" msgstr "" #. MSG_SELFTEST_FANS c=20 #: ../../Firmware/ultralcd.cpp:7020 msgid "Front/left fans" msgstr "" #. MSG_GCODE_DIFF_CONTINUE c=20 r=4 #: ../../Firmware/util.cpp:418 msgid "G-code sliced for a different level. Continue?" msgstr "" #. MSG_GCODE_DIFF_CANCELLED c=20 r=7 #: ../../Firmware/util.cpp:424 msgid "" "G-code sliced for a different level. Please re-slice the model again. Print " "cancelled." msgstr "" #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5 #: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335 #: ../../Firmware/util.cpp:471 msgid "G-code sliced for a different printer type. Continue?" msgstr "" #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8 #: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341 #: ../../Firmware/util.cpp:477 msgid "" "G-code sliced for a different printer type. Please re-slice the model again. " "Print cancelled." msgstr "" #. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5 #: ../../Firmware/util.cpp:385 msgid "G-code sliced for a newer firmware. Continue?" msgstr "" #. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8 #: ../../Firmware/util.cpp:391 msgid "" "G-code sliced for a newer firmware. Please update the firmware. Print " "cancelled." msgstr "" #. MSG_GCODE c=8 #: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4655 #: ../../Firmware/ultralcd.cpp:4658 ../../Firmware/ultralcd.cpp:4661 #: ../../Firmware/ultralcd.cpp:4664 msgid "Gcode" msgstr "" #. MSG_HW_SETUP c=18 #: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4672 #: ../../Firmware/ultralcd.cpp:4726 ../../Firmware/ultralcd.cpp:4818 msgid "HW Setup" msgstr "" #. MSG_SELFTEST_HEATERTHERMISTOR c=20 #: ../../Firmware/ultralcd.cpp:6968 msgid "Heater/Thermistor" msgstr "" #. MSG_HEATING c=20 #: ../../Firmware/Marlin_main.cpp:6203 ../../Firmware/messages.cpp:46 #: ../../Firmware/ultralcd.cpp:567 msgid "Heating" msgstr "" #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4 #: ../../Firmware/Marlin_main.cpp:9398 msgid "Heating disabled by safety timer." msgstr "" #. MSG_HEATING_COMPLETE c=20 #: ../../Firmware/Marlin_main.cpp:6234 ../../Firmware/messages.cpp:47 #: ../../Firmware/ultralcd.cpp:570 msgid "Heating done." msgstr "" #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16 #: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4042 msgid "" "Hi, I am your Original Prusa i3 printer. I will guide you through a short " "setup process, in which the Z-axis will be calibrated. Then, you will be " "ready to print." msgstr "" #. MSG_WIZARD_WELCOME c=20 r=7 #: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4045 msgid "" "Hi, I am your Original Prusa i3 printer. Would you like me to guide you " "through the setup process?" msgstr "" "Salut, ech sinn Aren Original Prusa i3 Drecker. Wellt Dir datt ech Iech " "duerch de Setupprozess guideieren?" #. MSG_HIGH_POWER c=10 #: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4358 #: ../../Firmware/ultralcd.cpp:4367 ../../Firmware/ultralcd.cpp:5777 #: ../../Firmware/ultralcd.cpp:5780 msgid "High power" msgstr "" #. MSG_WIZARD_XYZ_CAL c=20 r=8 #: ../../Firmware/ultralcd.cpp:4075 msgid "I will run xyz calibration now. It will take approx. 12 mins." msgstr "" #. MSG_WIZARD_Z_CAL c=20 r=8 #: ../../Firmware/ultralcd.cpp:4083 msgid "I will run z calibration now." msgstr "" #. MSG_ADDITIONAL_SHEETS c=20 r=9 #: ../../Firmware/ultralcd.cpp:4153 msgid "" "If you have additional steel sheets, calibrate their presets in Settings - " "HW Setup - Steel sheets." msgstr "" #. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4 #: ../../Firmware/mesh_bed_calibration.cpp:2531 msgid "Improving bed calibration point" msgstr "" #. MSG_INFO_SCREEN c=18 #: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5478 msgid "Info screen" msgstr "" #. MSG_INIT_SDCARD c=18 #: ../../Firmware/ultralcd.cpp:5545 msgid "Init. SD card" msgstr "" #. MSG_INSERT_FILAMENT c=20 #: ../../Firmware/ultralcd.cpp:2152 msgid "Insert filament" msgstr "" #. MSG_INSERT_FIL c=20 r=6 #: ../../Firmware/ultralcd.cpp:6223 msgid "" "Insert the filament (do not load it) into the extruder and then press the " "knob." msgstr "" #. MSG_FILAMENT_LOADED c=20 r=2 #: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3855 #: ../../Firmware/ultralcd.cpp:4108 ../../Firmware/ultralcd.cpp:4111 msgid "Is filament loaded?" msgstr "" #. MSG_STEEL_SHEET_CHECK c=20 r=2 #: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/Marlin_main.cpp:4886 #: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4084 msgid "Is steel sheet on heatbed?" msgstr "" #. MSG_ITERATION c=12 #: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49 msgid "Iteration" msgstr "" #. MSG_LAST_PRINT c=18 #: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1148 #: ../../Firmware/ultralcd.cpp:1296 msgid "Last print" msgstr "" #. MSG_LAST_PRINT_FAILURES c=20 #: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1169 #: ../../Firmware/ultralcd.cpp:1259 ../../Firmware/ultralcd.cpp:1269 #: ../../Firmware/ultralcd.cpp:1326 msgid "Last print failures" msgstr "" #. MSG_LEFT c=10 #: ../../Firmware/ultralcd.cpp:2496 msgid "Left" msgstr "" #. MSG_SELFTEST_EXTRUDER_FAN c=20 #: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7002 #: ../../Firmware/ultralcd.cpp:7149 ../../Firmware/ultralcd.cpp:7154 msgid "Left hotend fan?" msgstr "" #. MSG_BED_CORRECTION_LEFT c=14 #: ../../Firmware/ultralcd.cpp:2752 msgid "Left side [μm]" msgstr "" #. MSG_BL_HIGH c=12 #: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5862 msgid "Level Bright" msgstr "" #. MSG_BL_LOW c=12 #: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5863 msgid "Level Dimmed" msgstr "" #. MSG_LIN_CORRECTION c=18 #: ../../Firmware/ultralcd.cpp:4826 msgid "Lin. correction" msgstr "" #. MSG_BABYSTEP_Z c=18 #: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4838 #: ../../Firmware/ultralcd.cpp:5493 msgid "Live adjust Z" msgstr "" #. MSG_LOAD_ALL c=18 #: ../../Firmware/ultralcd.cpp:5120 msgid "Load all" msgstr "" #. MSG_LOAD_FILAMENT c=17 #: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5122 #: ../../Firmware/ultralcd.cpp:5133 ../../Firmware/ultralcd.cpp:5562 #: ../../Firmware/ultralcd.cpp:5576 msgid "Load filament" msgstr "" #. MSG_LOAD_TO_NOZZLE c=18 #: ../../Firmware/ultralcd.cpp:5563 msgid "Load to nozzle" msgstr "" #. MSG_LOADING_COLOR c=20 #: ../../Firmware/ultralcd.cpp:2185 msgid "Loading color" msgstr "" #. MSG_LOADING_FILAMENT c=20 #: ../../Firmware/Marlin_main.cpp:3641 ../../Firmware/messages.cpp:55 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026 #: ../../Firmware/ultralcd.cpp:2196 ../../Firmware/ultralcd.cpp:3949 msgid "Loading filament" msgstr "" #. MSG_LOOSE_PULLEY c=20 #: ../../Firmware/ultralcd.cpp:7008 msgid "Loose pulley" msgstr "" #. MSG_SOUND_LOUD c=7 #: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4450 #: ../../Firmware/ultralcd.cpp:4462 msgid "Loud" msgstr "" #. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4 #: ../../Firmware/Marlin_main.cpp:881 msgid "MK3 firmware detected on MK3S printer" msgstr "" #. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4 #: ../../Firmware/Marlin_main.cpp:874 msgid "MK3S firmware detected on MK3 printer" msgstr "" #. MSG_MMU_MODE c=8 #: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4381 #: ../../Firmware/ultralcd.cpp:4382 msgid "MMU Mode" msgstr "" #. MSG_MMU_OK_RESUMING_POSITION c=20 r=4 #: ../../Firmware/mmu.cpp:763 msgid "MMU OK. Resuming position..." msgstr "" #. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4 #: ../../Firmware/mmu.cpp:756 msgid "MMU OK. Resuming temperature..." msgstr "" #. MSG_MMU_OK_RESUMING c=20 r=4 #: ../../Firmware/mmu.cpp:774 msgid "MMU OK. Resuming..." msgstr "" #. MSG_MMU_FAILS c=15 #: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1170 #: ../../Firmware/ultralcd.cpp:1193 msgid "MMU fails" msgstr "" #. MSG_MMU_LOAD_FAILED c=20 #: ../../Firmware/mmu.cpp:1248 msgid "MMU load failed" msgstr "" #. MSG_MMU_LOAD_FAILS c=15 #: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1171 #: ../../Firmware/ultralcd.cpp:1194 msgid "MMU load fails" msgstr "" #. MSG_MMU_USER_ATTENTION c=20 r=3 #: ../../Firmware/mmu.cpp:723 msgid "MMU needs user attention." msgstr "" #. MSG_MMU_POWER_FAILS c=15 #: ../../Firmware/ultralcd.cpp:1195 msgid "MMU power fails" msgstr "" #. MSG_MMU_CONNECTED c=18 #: ../../Firmware/ultralcd.cpp:1680 msgid "MMU2 connected" msgstr "" #. MSG_MAGNETS_COMP c=13 #: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5836 msgid "Magnets comp." msgstr "" #. MSG_MAIN c=18 #: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1147 #: ../../Firmware/ultralcd.cpp:1295 ../../Firmware/ultralcd.cpp:1338 #: ../../Firmware/ultralcd.cpp:1645 ../../Firmware/ultralcd.cpp:4795 #: ../../Firmware/ultralcd.cpp:4892 ../../Firmware/ultralcd.cpp:5119 #: ../../Firmware/ultralcd.cpp:5131 ../../Firmware/ultralcd.cpp:5154 #: ../../Firmware/ultralcd.cpp:5173 ../../Firmware/ultralcd.cpp:5717 msgid "Main" msgstr "" #. MSG_MEASURED_SKEW c=14 #: ../../Firmware/ultralcd.cpp:2537 msgid "Measured skew" msgstr "" #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3 #: ../../Firmware/Marlin_main.cpp:3293 #: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62 msgid "Measuring reference height of calibration point" msgstr "" #. MSG_MESH c=12 #: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5832 msgid "Mesh" msgstr "" #. MSG_MESH_BED_LEVELING c=18 #: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4823 #: ../../Firmware/ultralcd.cpp:4910 msgid "Mesh Bed Leveling" msgstr "" #. MSG_MODE c=6 #: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4336 #: ../../Firmware/ultralcd.cpp:4338 ../../Firmware/ultralcd.cpp:4358 #: ../../Firmware/ultralcd.cpp:4361 ../../Firmware/ultralcd.cpp:4364 #: ../../Firmware/ultralcd.cpp:4367 ../../Firmware/ultralcd.cpp:5763 #: ../../Firmware/ultralcd.cpp:5770 ../../Firmware/ultralcd.cpp:5777 #: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5779 #: ../../Firmware/ultralcd.cpp:5780 ../../Firmware/ultralcd.cpp:5864 msgid "Mode" msgstr "" #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3 #: ../../Firmware/ultralcd.cpp:3598 msgid "Mode change in progress..." msgstr "" #. MSG_MODEL c=8 #: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4575 #: ../../Firmware/ultralcd.cpp:4578 ../../Firmware/ultralcd.cpp:4581 #: ../../Firmware/ultralcd.cpp:4584 msgid "Model" msgstr "" #. MSG_SELFTEST_MOTOR c=18 #: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6982 #: ../../Firmware/ultralcd.cpp:6991 ../../Firmware/ultralcd.cpp:7009 msgid "Motor" msgstr "" #. MSG_MOVE_X c=18 #: ../../Firmware/ultralcd.cpp:3492 msgid "Move X" msgstr "" #. MSG_MOVE_Y c=18 #: ../../Firmware/ultralcd.cpp:3493 msgid "Move Y" msgstr "" #. MSG_MOVE_Z c=18 #: ../../Firmware/ultralcd.cpp:3494 msgid "Move Z" msgstr "" #. MSG_MOVE_AXIS c=18 #: ../../Firmware/ultralcd.cpp:4801 msgid "Move axis" msgstr "" #. MSG_NA c=3 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124 #: ../../Firmware/ultralcd.cpp:2502 ../../Firmware/ultralcd.cpp:2547 #: ../../Firmware/ultralcd.cpp:3411 ../../Firmware/ultralcd.cpp:4228 #: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:5737 #: ../../Firmware/ultralcd.cpp:5836 msgid "N/A" msgstr "" #. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2 #: ../../Firmware/util.cpp:199 msgid "New firmware version available:" msgstr "" #. MSG_NO c=4 #: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2804 #: ../../Firmware/ultralcd.cpp:3180 ../../Firmware/ultralcd.cpp:4785 #: ../../Firmware/ultralcd.cpp:5988 msgid "No" msgstr "" #. MSG_NO_CARD c=18 #: ../../Firmware/ultralcd.cpp:5543 msgid "No SD card" msgstr "" #. MSG_NO_MOVE c=20 #: ../../Firmware/Marlin_main.cpp:5377 msgid "No move." msgstr "" #. MSG_NONE c=8 #: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4405 #: ../../Firmware/ultralcd.cpp:4493 ../../Firmware/ultralcd.cpp:4502 #: ../../Firmware/ultralcd.cpp:4575 ../../Firmware/ultralcd.cpp:4584 #: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4623 #: ../../Firmware/ultralcd.cpp:4655 ../../Firmware/ultralcd.cpp:4664 msgid "None" msgstr "" #. MSG_NORMAL c=7 #: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4336 #: ../../Firmware/ultralcd.cpp:4381 ../../Firmware/ultralcd.cpp:4397 #: ../../Firmware/ultralcd.cpp:4416 ../../Firmware/ultralcd.cpp:5763 msgid "Normal" msgstr "" #. MSG_SELFTEST_NOTCONNECTED c=20 #: ../../Firmware/ultralcd.cpp:6969 msgid "Not connected" msgstr "" #. MSG_SELFTEST_FAN_NO c=19 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7168 #: ../../Firmware/ultralcd.cpp:7183 ../../Firmware/ultralcd.cpp:7191 msgid "Not spinning" msgstr "" #. MSG_WIZARD_V2_CAL c=20 r=8 #: ../../Firmware/ultralcd.cpp:3962 msgid "" "Now I will calibrate distance between tip of the nozzle and heatbed surface." msgstr "" #. MSG_WIZARD_WILL_PREHEAT c=20 r=4 #: ../../Firmware/ultralcd.cpp:4091 msgid "Now I will preheat nozzle for PLA." msgstr "" #. MSG_REMOVE_TEST_PRINT c=20 r=4 #: ../../Firmware/ultralcd.cpp:4082 msgid "Now remove the test print from steel sheet." msgstr "" #. MSG_NOZZLE c=10 #: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1402 #: ../../Firmware/ultralcd.cpp:4493 ../../Firmware/ultralcd.cpp:4496 #: ../../Firmware/ultralcd.cpp:4499 ../../Firmware/ultralcd.cpp:4502 #: ../../Firmware/ultralcd.cpp:5720 ../../Firmware/ultralcd.cpp:5882 msgid "Nozzle" msgstr "" #. MSG_NOZZLE_DIAMETER c=10 #: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4546 msgid "Nozzle d." msgstr "" #. MSG_OFF c=3 #: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122 #: ../../Firmware/ultralcd.cpp:4234 ../../Firmware/ultralcd.cpp:4250 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:4313 #: ../../Firmware/ultralcd.cpp:4342 ../../Firmware/ultralcd.cpp:4811 #: ../../Firmware/ultralcd.cpp:4830 ../../Firmware/ultralcd.cpp:4834 #: ../../Firmware/ultralcd.cpp:5644 ../../Firmware/ultralcd.cpp:5741 #: ../../Firmware/ultralcd.cpp:5756 ../../Firmware/ultralcd.cpp:5767 #: ../../Firmware/ultralcd.cpp:5836 ../../Firmware/ultralcd.cpp:7841 #: ../../Firmware/ultralcd.cpp:7845 msgid "Off" msgstr "" #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6 #: ../../Firmware/Marlin_main.cpp:1535 msgid "Old settings found. Default PID, Esteps etc. will be set." msgstr "" #. MSG_ON c=3 #: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4244 #: ../../Firmware/ultralcd.cpp:4248 ../../Firmware/ultralcd.cpp:4280 #: ../../Firmware/ultralcd.cpp:4303 ../../Firmware/ultralcd.cpp:4341 #: ../../Firmware/ultralcd.cpp:4811 ../../Firmware/ultralcd.cpp:4830 #: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5745 #: ../../Firmware/ultralcd.cpp:5756 ../../Firmware/ultralcd.cpp:5765 #: ../../Firmware/ultralcd.cpp:5836 ../../Firmware/ultralcd.cpp:7841 #: ../../Firmware/ultralcd.cpp:7845 msgid "On" msgstr "" #. MSG_SOUND_ONCE c=7 #: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4453 msgid "Once" msgstr "" #. MSG_PAUSED_THERMAL_ERROR c=20 #: ../../Firmware/Marlin_main.cpp:9718 ../../Firmware/messages.cpp:164 msgid "PAUSED THERMAL ERROR" msgstr "" #. MSG_PID_RUNNING c=20 #: ../../Firmware/ultralcd.cpp:1017 msgid "PID cal." msgstr "" #. MSG_PID_FINISHED c=20 #: ../../Firmware/ultralcd.cpp:1022 msgid "PID cal. finished" msgstr "" #. MSG_PID_EXTRUDER c=17 #: ../../Firmware/ultralcd.cpp:4913 msgid "PID calibration" msgstr "" #. MSG_PINDA_PREHEAT c=20 #: ../../Firmware/ultralcd.cpp:657 msgid "PINDA Heating" msgstr "" #. MSG_PINDA_CALIBRATION c=13 #: ../../Firmware/Marlin_main.cpp:4932 ../../Firmware/Marlin_main.cpp:5035 #: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:654 #: ../../Firmware/ultralcd.cpp:4830 ../../Firmware/ultralcd.cpp:4920 msgid "PINDA cal." msgstr "" #. MSG_PINDA_CAL_FAILED c=20 r=4 #: ../../Firmware/ultralcd.cpp:3361 msgid "PINDA calibration failed" msgstr "" #. MSG_PINDA_CALIBRATION_DONE c=20 r=8 #: ../../Firmware/Marlin_main.cpp:5112 ../../Firmware/messages.cpp:110 #: ../../Firmware/ultralcd.cpp:3355 msgid "" "PINDA calibration is finished and active. It can be disabled in menu " "Settings->PINDA cal." msgstr "" #. MSG_PAUSE c=5 #: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4707 msgid "Pause" msgstr "" #. MSG_PAUSE_PRINT c=18 #: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5507 #: ../../Firmware/ultralcd.cpp:5509 msgid "Pause print" msgstr "" #. MSG_PAPER c=20 r=10 #: ../../Firmware/Marlin_main.cpp:3315 ../../Firmware/messages.cpp:68 msgid "" "Place a sheet of paper under the nozzle during the calibration of first 4 " "points. If the nozzle catches the paper, power off the printer immediately." msgstr "" #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8 #: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4176 msgid "" "Please check our handbook and fix the problem. Then resume the Wizard by " "rebooting the printer." msgstr "" #. MSG_CHECK_IR_CONNECTION c=20 r=4 #: ../../Firmware/ultralcd.cpp:6250 msgid "Please check the IR sensor connection, unload filament if present." msgstr "" #. MSG_SELFTEST_PLEASECHECK c=20 #: ../../Firmware/ultralcd.cpp:6963 msgid "Please check:" msgstr "" #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8 #: ../../Firmware/ultralcd.cpp:4148 msgid "Please clean heatbed and then press the knob." msgstr "" #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8 #: ../../Firmware/Marlin_main.cpp:3291 ../../Firmware/messages.cpp:24 msgid "Please clean the nozzle for calibration. Click when done." msgstr "" #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6 #: ../../Firmware/ultralcd.cpp:3945 msgid "" "Please insert filament into the extruder, then press the knob to load it." msgstr "" #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6 #: ../../Firmware/ultralcd.cpp:3940 msgid "" "Please insert filament into the first tube of the MMU, then press the knob " "to load it." msgstr "" #. MSG_PLEASE_LOAD_PLA c=20 r=4 #: ../../Firmware/ultralcd.cpp:3863 msgid "Please load filament first." msgstr "" #. MSG_CHECK_IDLER c=20 r=5 #: ../../Firmware/Marlin_main.cpp:3551 msgid "Please open idler and remove filament manually." msgstr "" #. MSG_PLACE_STEEL_SHEET c=20 r=5 #: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70 #: ../../Firmware/ultralcd.cpp:4085 msgid "Please place steel sheet on heatbed." msgstr "" #. MSG_PRESS_TO_UNLOAD c=20 r=4 #: ../../Firmware/Marlin_main.cpp:11580 ../../Firmware/Marlin_main.cpp:11633 #: ../../Firmware/messages.cpp:74 msgid "Please press the knob to unload filament" msgstr "" #. MSG_PULL_OUT_FILAMENT c=20 r=4 #: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5213 msgid "Please pull out filament immediately" msgstr "" #. MSG_EJECT_REMOVE c=20 r=4 #: ../../Firmware/mmu.cpp:1082 msgid "Please remove filament and then press the knob." msgstr "" #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3 #: ../../Firmware/ultralcd.cpp:4081 msgid "Please remove shipping helpers first." msgstr "" #. MSG_REMOVE_STEEL_SHEET c=20 r=4 #: ../../Firmware/Marlin_main.cpp:3313 ../../Firmware/Marlin_main.cpp:4896 #: ../../Firmware/messages.cpp:79 msgid "Please remove steel sheet from heatbed." msgstr "" #. MSG_RUN_XYZ c=20 r=4 #: ../../Firmware/Marlin_main.cpp:4872 msgid "Please run XYZ calibration first." msgstr "" #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4 #: ../../Firmware/ultralcd.cpp:6247 msgid "Please unload the filament first, then repeat this action." msgstr "" #. MSG_UPDATE_MMU2_FW c=20 r=4 #: ../../Firmware/mmu.cpp:1002 msgid "Please update firmware in your MMU2. Waiting for reset." msgstr "" #. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 #: ../../Firmware/util.cpp:203 msgid "Please upgrade." msgstr "" #. MSG_PLEASE_WAIT c=20 #: ../../Firmware/Marlin_main.cpp:3547 ../../Firmware/Marlin_main.cpp:3563 #: ../../Firmware/Marlin_main.cpp:7931 ../../Firmware/messages.cpp:71 #: ../../Firmware/ultralcd.cpp:2186 ../../Firmware/ultralcd.cpp:2197 msgid "Please wait" msgstr "" #. MSG_POWER_FAILURES c=15 #: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1219 #: ../../Firmware/ultralcd.cpp:1260 ../../Firmware/ultralcd.cpp:1270 msgid "Power failures" msgstr "" #. MSG_PREHEAT c=18 #: ../../Firmware/ultralcd.cpp:5502 msgid "Preheat" msgstr "" #. MSG_PREHEAT_NOZZLE c=20 #: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2280 msgid "Preheat the nozzle!" msgstr "" #. MSG_WIZARD_HEATING c=20 r=3 #: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2900 #: ../../Firmware/ultralcd.cpp:3924 ../../Firmware/ultralcd.cpp:3926 msgid "Preheating nozzle. Please wait." msgstr "" #. MSG_PREHEATING_TO_CUT c=20 #: ../../Firmware/ultralcd.cpp:1988 msgid "Preheating to cut" msgstr "" #. MSG_PREHEATING_TO_EJECT c=20 #: ../../Firmware/ultralcd.cpp:1985 msgid "Preheating to eject" msgstr "" #. MSG_PREHEATING_TO_LOAD c=20 #: ../../Firmware/ultralcd.cpp:1976 msgid "Preheating to load" msgstr "" #. MSG_PREHEATING_TO_UNLOAD c=20 #: ../../Firmware/ultralcd.cpp:1981 msgid "Preheating to unload" msgstr "" #. MSG_PRESS_KNOB c=20 #: ../../Firmware/ultralcd.cpp:1809 msgid "Press the knob" msgstr "" #. MSG_PRESS_TO_PREHEAT c=20 r=4 #: ../../Firmware/Marlin_main.cpp:11611 msgid "Press the knob to preheat nozzle and continue." msgstr "" #. MSG_RESUME_NOZZLE_TEMP c=20 r=4 #: ../../Firmware/mmu.cpp:727 msgid "Press the knob to resume nozzle temperature." msgstr "" #. MSG_PRINT_ABORTED c=20 #: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:852 msgid "Print aborted" msgstr "" #. MSG_PRINT_FAN_SPEED c=16 #: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1126 #: ../../Firmware/ultralcd.cpp:7324 msgid "Print fan:" msgstr "" #. MSG_CARD_MENU c=18 #: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5535 msgid "Print from SD" msgstr "" #. MSG_PRINT_PAUSED c=20 #: ../../Firmware/ultralcd.cpp:866 msgid "Print paused" msgstr "" #. MSG_PRINT_TIME c=19 #: ../../Firmware/ultralcd.cpp:2366 msgid "Print time" msgstr "" #. MSG_PRINTER_IP c=18 #: ../../Firmware/ultralcd.cpp:1711 msgid "Printer IP Addr:" msgstr "" #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 #: ../../Firmware/Marlin_main.cpp:1548 ../../Firmware/messages.cpp:42 msgid "" "Printer has not been calibrated yet. Please follow the manual, chapter First " "steps, section Calibration flow." msgstr "" #. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5 #: ../../Firmware/util.cpp:299 msgid "Printer nozzle diameter differs from the G-code. Continue?" msgstr "" #. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9 #: ../../Firmware/util.cpp:305 msgid "" "Printer nozzle diameter differs from the G-code. Please check the value in " "settings. Print cancelled." msgstr "" #. MSG_RPI_PORT c=13 #: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4834 msgid "RPi port" msgstr "" #. MSG_BED_CORRECTION_REAR c=14 #: ../../Firmware/ultralcd.cpp:2755 msgid "Rear side [μm]" msgstr "" #. MSG_RECOVERING_PRINT c=20 #: ../../Firmware/Marlin_main.cpp:10954 msgid "Recovering print" msgstr "" #. MSG_REMOVE_OLD_FILAMENT c=20 r=5 #: ../../Firmware/mmu.cpp:831 msgid "Remove old filament and press the knob to start loading new filament." msgstr "" #. MSG_RENAME c=18 #: ../../Firmware/ultralcd.cpp:5426 msgid "Rename" msgstr "" #. MSG_RESET c=14 #: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2756 #: ../../Firmware/ultralcd.cpp:5427 msgid "Reset" msgstr "" #. MSG_CALIBRATE_BED_RESET c=18 #: ../../Firmware/ultralcd.cpp:4917 msgid "Reset XYZ calibr." msgstr "" #. MSG_RESUME_PRINT c=18 #: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81 #: ../../Firmware/ultralcd.cpp:5521 ../../Firmware/ultralcd.cpp:5523 msgid "Resume print" msgstr "" #. MSG_RESUMING_PRINT c=20 #: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:665 msgid "Resuming print" msgstr "" #. MSG_RIGHT c=10 #: ../../Firmware/ultralcd.cpp:2497 msgid "Right" msgstr "" #. MSG_BED_CORRECTION_RIGHT c=14 #: ../../Firmware/ultralcd.cpp:2753 msgid "Right side[μm]" msgstr "" #. MSG_WIZARD_RERUN c=20 r=7 #: ../../Firmware/ultralcd.cpp:3884 msgid "" "Running Wizard will delete current calibration results and start from the " "beginning. Continue?" msgstr "" #. MSG_RUNOUTS c=7 #: ../../Firmware/ultralcd.cpp:1271 msgid "Runouts" msgstr "" #. MSG_SD_CARD c=8 #: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4395 #: ../../Firmware/ultralcd.cpp:4397 ../../Firmware/ultralcd.cpp:4414 #: ../../Firmware/ultralcd.cpp:4416 msgid "SD card" msgstr "" #. MSG_STOPPED c=20 #: ../../Firmware/Marlin_main.cpp:9747 ../../Firmware/messages.cpp:108 msgid "STOPPED." msgstr "" #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3 #: ../../Firmware/Marlin_main.cpp:3297 ../../Firmware/Marlin_main.cpp:3317 #: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40 msgid "Searching bed calibration point" msgstr "" #. MSG_SELECT c=18 #: ../../Firmware/ultralcd.cpp:5419 msgid "Select" msgstr "" #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7 #: ../../Firmware/ultralcd.cpp:3966 msgid "" "Select a filament for the First Layer Calibration and select it in the on-" "screen menu." msgstr "" #. MSG_SELECT_EXTRUDER c=20 #: ../../Firmware/Marlin_main.cpp:8608 ../../Firmware/messages.cpp:50 msgid "Select extruder:" msgstr "" #. MSG_SELECT_FILAMENT c=20 #: ../../Firmware/Marlin_main.cpp:8577 ../../Firmware/Marlin_main.cpp:8604 #: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3834 msgid "Select filament:" msgstr "" #. MSG_SELECT_LANGUAGE c=18 #: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3679 #: ../../Firmware/ultralcd.cpp:4841 msgid "Select language" msgstr "" #. MSG_SEL_PREHEAT_TEMP c=20 r=6 #: ../../Firmware/ultralcd.cpp:4122 msgid "Select nozzle preheat temperature which matches your material." msgstr "" #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4 #: ../../Firmware/ultralcd.cpp:3971 msgid "Select temperature which matches your material." msgstr "" #. MSG_SELFTEST_OK c=20 #: ../../Firmware/ultralcd.cpp:6522 msgid "Self test OK" msgstr "" #. MSG_SELFTEST_START c=20 #: ../../Firmware/ultralcd.cpp:6290 msgid "Self test start" msgstr "" #. MSG_SELFTEST c=18 #: ../../Firmware/ultralcd.cpp:4904 msgid "Selftest" msgstr "" #. MSG_SELFTEST_ERROR c=20 #: ../../Firmware/ultralcd.cpp:6962 msgid "Selftest error!" msgstr "" #. MSG_SELFTEST_FAILED c=20 #: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6526 #: ../../Firmware/ultralcd.cpp:7049 ../../Firmware/ultralcd.cpp:7314 msgid "Selftest failed" msgstr "" #. MSG_FORCE_SELFTEST c=20 r=8 #: ../../Firmware/Marlin_main.cpp:1567 msgid "Selftest will be run to calibrate accurate sensorless rehoming." msgstr "" #. MSG_INFO_SENSORS c=18 #: ../../Firmware/ultralcd.cpp:1723 msgid "Sensor info" msgstr "" #. MSG_FS_VERIFIED c=20 r=3 #: ../../Firmware/ultralcd.cpp:6254 msgid "Sensor verified, remove the filament now." msgstr "" #. MSG_SET_TEMPERATURE c=20 #: ../../Firmware/ultralcd.cpp:2773 msgid "Set temperature:" msgstr "" #. MSG_SETTINGS c=18 #: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3491 #: ../../Firmware/ultralcd.cpp:3696 ../../Firmware/ultralcd.cpp:4206 #: ../../Firmware/ultralcd.cpp:5580 ../../Firmware/ultralcd.cpp:5827 #: ../../Firmware/ultralcd.cpp:5880 msgid "Settings" msgstr "" #. MSG_SEVERE_SKEW c=14 #: ../../Firmware/ultralcd.cpp:2540 msgid "Severe skew" msgstr "" #. MSG_SHEET c=10 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221 #: ../../Firmware/messages.cpp:60 msgid "Sheet" msgstr "" #. MSG_SHEET_OFFSET c=20 r=4 #: ../../Firmware/ultralcd.cpp:3824 msgid "" "Sheet %.7s\n" "Z offset: %+1.3fmm\n" "%cContinue\n" "%cReset" msgstr "" #. MSG_SHOW_END_STOPS c=18 #: ../../Firmware/ultralcd.cpp:4915 msgid "Show end stops" msgstr "" #. MSG_SILENT c=7 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4361 #: ../../Firmware/ultralcd.cpp:4456 ../../Firmware/ultralcd.cpp:5778 msgid "Silent" msgstr "" #. MSG_SLIGHT_SKEW c=14 #: ../../Firmware/ultralcd.cpp:2539 msgid "Slight skew" msgstr "" #. MSG_FILE_CNT c=20 r=6 #: ../../Firmware/cardreader.cpp:818 msgid "" "Some files will not be sorted. Max. No. of files in 1 folder for sorting is " "100." msgstr "" #. MSG_ZLEVELING_ENFORCED c=20 r=4 #: ../../Firmware/Marlin_main.cpp:3060 msgid "Some problem encountered, Z-leveling enforced ..." msgstr "" #. MSG_SORT c=7 #: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4403 #: ../../Firmware/ultralcd.cpp:4404 ../../Firmware/ultralcd.cpp:4405 msgid "Sort" msgstr "" #. MSG_SORTING_FILES c=20 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929 #: ../../Firmware/messages.cpp:96 msgid "Sorting files" msgstr "" #. MSG_SOUND c=9 #: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4450 #: ../../Firmware/ultralcd.cpp:4453 ../../Firmware/ultralcd.cpp:4456 #: ../../Firmware/ultralcd.cpp:4459 ../../Firmware/ultralcd.cpp:4462 msgid "Sound" msgstr "" #. MSG_SPEED c=15 #: ../../Firmware/ultralcd.cpp:5718 msgid "Speed" msgstr "" #. MSG_SELFTEST_FAN_YES c=19 #: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7166 #: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189 msgid "Spinning" msgstr "" #. MSG_TEMP_CAL_WARNING c=20 r=4 #: ../../Firmware/Marlin_main.cpp:4885 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required." msgstr "" #. MSG_STATISTICS c=18 #: ../../Firmware/ultralcd.cpp:5585 msgid "Statistics" msgstr "" #. MSG_STEALTH c=7 #: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4338 #: ../../Firmware/ultralcd.cpp:4382 ../../Firmware/ultralcd.cpp:5770 msgid "Stealth" msgstr "" #. MSG_STEEL_SHEETS c=18 #: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4763 #: ../../Firmware/ultralcd.cpp:5416 msgid "Steel sheets" msgstr "" #. MSG_STOP_PRINT c=18 #: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5528 #: ../../Firmware/ultralcd.cpp:5987 msgid "Stop print" msgstr "" #. MSG_STRICT c=8 #: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4499 #: ../../Firmware/ultralcd.cpp:4581 ../../Firmware/ultralcd.cpp:4620 #: ../../Firmware/ultralcd.cpp:4661 msgid "Strict" msgstr "" #. MSG_SUPPORT c=18 #: ../../Firmware/ultralcd.cpp:5594 msgid "Support" msgstr "" #. MSG_SELFTEST_SWAPPED c=16 #: ../../Firmware/ultralcd.cpp:7021 msgid "Swapped" msgstr "" #. MSG_THERMAL_ANOMALY c=20 #: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442 msgid "THERMAL ANOMALY" msgstr "" #. MSG_TM_AUTOTUNE_FAILED c=20 #: ../../Firmware/temperature.cpp:2899 msgid "TM autotune failed" msgstr "" #. MSG_TEMP_MODEL_AUTOTUNE c=20 #: ../../Firmware/temperature.cpp:2884 msgid "Temp. model autotune" msgstr "" #. MSG_TEMPERATURE c=18 #: ../../Firmware/ultralcd.cpp:4797 msgid "Temperature" msgstr "" #. MSG_MENU_TEMPERATURES c=18 #: ../../Firmware/ultralcd.cpp:1729 msgid "Temperatures" msgstr "" #. MSG_WIZARD_V2_CAL_2 c=20 r=12 #: ../../Firmware/ultralcd.cpp:3974 msgid "" "The printer will start printing a zig-zag line. Rotate the knob until you " "reach the optimal height. Check the pictures in the handbook (Calibration " "chapter)." msgstr "" #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9 #: ../../Firmware/Marlin_main.cpp:1561 ../../Firmware/messages.cpp:43 msgid "" "There is still a need to make Z calibration. Please follow the manual, " "chapter First steps, section Calibration flow." msgstr "" #. MSG_SORT_TIME c=8 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4403 msgid "Time" msgstr "" #. MSG_TIMEOUT c=12 #: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5865 msgid "Timeout" msgstr "" #. MSG_TOTAL c=6 #: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1149 #: ../../Firmware/ultralcd.cpp:1297 msgid "Total" msgstr "" #. MSG_TOTAL_FAILURES c=20 #: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1192 #: ../../Firmware/ultralcd.cpp:1218 ../../Firmware/ultralcd.cpp:1328 msgid "Total failures" msgstr "" #. MSG_TOTAL_FILAMENT c=19 #: ../../Firmware/ultralcd.cpp:2387 msgid "Total filament" msgstr "" #. MSG_TOTAL_PRINT_TIME c=19 #: ../../Firmware/ultralcd.cpp:2388 msgid "Total print time" msgstr "" #. MSG_TUNE c=18 #: ../../Firmware/ultralcd.cpp:5500 msgid "Tune" msgstr "" #. MSG_UNLOAD_FILAMENT c=18 #: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5564 #: ../../Firmware/ultralcd.cpp:5578 msgid "Unload filament" msgstr "" #. MSG_UNLOADING_FILAMENT c=20 #: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957 #: ../../Firmware/ultralcd.cpp:5197 msgid "Unloading filament" msgstr "" #. MSG_FIL_FAILED c=20 r=5 #: ../../Firmware/ultralcd.cpp:6258 msgid "Verification failed, remove the filament and try again." msgstr "" #. MSG_MENU_VOLTAGES c=18 #: ../../Firmware/ultralcd.cpp:1732 msgid "Voltages" msgstr "" #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 #: ../../Firmware/ultralcd.cpp:3534 msgid "" "WARNING:\n" "Crash detection\n" "disabled in\n" "Stealth mode" msgstr "" #. MSG_USERWAIT c=20 #: ../../Firmware/Marlin_main.cpp:4090 msgid "Wait for user..." msgstr "" #. MSG_WAITING_TEMP_PINDA c=20 r=3 #: ../../Firmware/ultralcd.cpp:2881 msgid "Waiting for PINDA probe cooling" msgstr "" #. MSG_WAITING_TEMP c=20 r=4 #: ../../Firmware/ultralcd.cpp:2913 msgid "Waiting for nozzle and bed cooling" msgstr "" #. MSG_WARN c=8 #: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4496 #: ../../Firmware/ultralcd.cpp:4578 ../../Firmware/ultralcd.cpp:4617 #: ../../Firmware/ultralcd.cpp:4658 msgid "Warn" msgstr "" #. MSG_CHANGED_BOTH c=20 r=4 #: ../../Firmware/Marlin_main.cpp:1527 msgid "Warning: both printer type and motherboard type changed." msgstr "" #. MSG_CHANGED_MOTHERBOARD c=20 r=4 #: ../../Firmware/Marlin_main.cpp:1519 msgid "Warning: motherboard type changed." msgstr "" #. MSG_CHANGED_PRINTER c=20 r=4 #: ../../Firmware/Marlin_main.cpp:1523 msgid "Warning: printer type changed." msgstr "" #. MSG_UNLOAD_SUCCESSFUL c=20 r=2 #: ../../Firmware/Marlin_main.cpp:3542 msgid "Was filament unload successful?" msgstr "" #. MSG_SELFTEST_WIRINGERROR c=18 #: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6973 #: ../../Firmware/ultralcd.cpp:6977 ../../Firmware/ultralcd.cpp:6997 #: ../../Firmware/ultralcd.cpp:7003 ../../Firmware/ultralcd.cpp:7027 msgid "Wiring error" msgstr "" #. MSG_WIZARD c=17 #: ../../Firmware/ultralcd.cpp:4895 msgid "Wizard" msgstr "" #. MSG_X_CORRECTION c=13 #: ../../Firmware/ultralcd.cpp:4210 msgid "X-correct:" msgstr "" #. MSG_XFLASH c=18 #: ../../Firmware/ultralcd.cpp:5596 msgid "XFLASH init" msgstr "" #. MSG_XYZ_DETAILS c=18 #: ../../Firmware/ultralcd.cpp:1721 msgid "XYZ cal. details" msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8 #: ../../Firmware/ultralcd.cpp:3333 msgid "XYZ calibration all right. Skew will be corrected automatically." msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8 #: ../../Firmware/ultralcd.cpp:3330 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!" msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8 #: ../../Firmware/ultralcd.cpp:3311 msgid "XYZ calibration compromised. Front calibration points not reachable." msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8 #: ../../Firmware/ultralcd.cpp:3317 msgid "" "XYZ calibration compromised. Left front calibration point not reachable." msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8 #: ../../Firmware/ultralcd.cpp:3314 msgid "" "XYZ calibration compromised. Right front calibration point not reachable." msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6 #: ../../Firmware/ultralcd.cpp:3293 msgid "XYZ calibration failed. Bed calibration point was not found." msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6 #: ../../Firmware/ultralcd.cpp:3299 msgid "XYZ calibration failed. Front calibration points not reachable." msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8 #: ../../Firmware/ultralcd.cpp:3305 msgid "XYZ calibration failed. Left front calibration point not reachable." msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8 #: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3296 #: ../../Firmware/ultralcd.cpp:3324 msgid "XYZ calibration failed. Please consult the manual." msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6 #: ../../Firmware/ultralcd.cpp:3302 msgid "XYZ calibration failed. Right front calibration point not reachable." msgstr "" #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 #: ../../Firmware/ultralcd.cpp:3327 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" msgstr "" #. MSG_Y_DIST_FROM_MIN c=20 #: ../../Firmware/ultralcd.cpp:2494 msgid "Y distance from min" msgstr "" #. MSG_Y_CORRECTION c=13 #: ../../Firmware/ultralcd.cpp:4211 msgid "Y-correct:" msgstr "" #. MSG_YES c=4 #: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2216 #: ../../Firmware/ultralcd.cpp:2800 ../../Firmware/ultralcd.cpp:3180 #: ../../Firmware/ultralcd.cpp:4785 ../../Firmware/ultralcd.cpp:5989 msgid "Yes" msgstr "" #. MSG_WIZARD_QUIT c=20 r=8 #: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4187 msgid "You can always resume the Wizard from Calibration -> Wizard." msgstr "" #. MSG_Z_CORRECTION c=13 #: ../../Firmware/ultralcd.cpp:4212 msgid "Z-correct:" msgstr "" #. MSG_Z_PROBE_NR c=14 #: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5835 msgid "Z-probe nr." msgstr "" #. MSG_MEASURED_OFFSET c=20 #: ../../Firmware/ultralcd.cpp:2565 msgid "[0;0] point offset" msgstr "" #. MSG_PRESS c=20 r=2 #: ../../Firmware/ultralcd.cpp:2154 msgid "and press the knob" msgstr "" #. MSG_TO_LOAD_FIL c=20 #: ../../Firmware/ultralcd.cpp:1816 msgid "to load filament" msgstr "" #. MSG_TO_UNLOAD_FIL c=20 #: ../../Firmware/ultralcd.cpp:1820 msgid "to unload filament" msgstr "" #. MSG_UNKNOWN c=13 #: ../../Firmware/ultralcd.cpp:1688 msgid "unknown" msgstr "" #. MSG_IR_UNKNOWN c=18 #: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162 msgid "unknown state" msgstr "" #. MSG_REFRESH c=18 #: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6077 #: ../../Firmware/ultralcd.cpp:6080 msgid "🔃Refresh" msgstr ""