/** * English * * LCD Menu Messages * Please note these are limited to 17 characters! * */ #define(length=20) WELCOME_MSG CUSTOM_MENDEL_NAME " ready." #define MSG_SD_INSERTED "Card inserted" #define MSG_SD_REMOVED "Card removed" #define MSG_MAIN "Main" #define MSG_DISABLE_STEPPERS "Disable steppers" #define MSG_AUTO_HOME "Auto home" #define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_ORIGIN "Set origin" #define MSG_COOLDOWN "Cooldown" #define MSG_SWITCH_PS_ON "Switch power on" #define MSG_SWITCH_PS_OFF "Switch power off" #define MSG_MOVE_AXIS "Move axis" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_SPEED "Speed" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE2 "Nozzle3" #define MSG_BED "Bed" #define(length=14) MSG_FAN_SPEED "Fan speed" #define MSG_FLOW "Flow" #define MSG_FLOW0 "Flow 0" #define MSG_FLOW1 "Flow 1" #define MSG_FLOW2 "Flow 2" #define MSG_CONTROL "Control" #define MSG_MIN " \002 Min" #define MSG_MAX " \002 Max" #define MSG_FACTOR " \002 Fact" #define MSG_TEMPERATURE "Temperature" #define MSG_MOTION "Motion" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_STORE_EPROM "Store memory" #define MSG_LOAD_EPROM "Load memory" #define MSG_RESTORE_FAILSAFE "Restore failsafe" #define MSG_REFRESH "\xF8" "Refresh" #define MSG_WATCH "Info screen" #define MSG_TUNE "Tune" #define MSG_PAUSE_PRINT "Pause print" #define MSG_RESUME_PRINT "Resume print" #define MSG_STOP_PRINT "Stop print" #define MSG_CARD_MENU "Print from SD" #define MSG_NO_CARD "No SD card" #define MSG_DWELL "Sleep..." #define MSG_USERWAIT "Wait for user..." #define MSG_RESUMING "Resuming print" #define(length=20) MSG_PRINT_ABORTED "Print aborted" #define MSG_NO_MOVE "No move." #define MSG_KILLED "KILLED. " #define MSG_STOPPED "STOPPED. " #define MSG_FILAMENTCHANGE "Change filament" #define MSG_INIT_SDCARD "Init. SD card" #define MSG_CNG_SDCARD "Change SD card" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Live adjust Z" #define MSG_ADJUSTZ "Auto adjust Z?" #define MSG_PICK_Z "Pick print" #define MSG_SETTINGS "Settings" #define MSG_PREHEAT "Preheat" #define MSG_UNLOAD_FILAMENT "Unload filament" #define MSG_LOAD_FILAMENT "Load filament" #define MSG_LOAD_FILAMENT_1 "Load filament 1" #define MSG_LOAD_FILAMENT_2 "Load filament 2" #define MSG_LOAD_FILAMENT_3 "Load filament 3" #define MSG_LOAD_FILAMENT_4 "Load filament 4" #define MSG_UNLOAD_FILAMENT_1 "Unload filament 1" #define MSG_UNLOAD_FILAMENT_2 "Unload filament 2" #define MSG_UNLOAD_FILAMENT_3 "Unload filament 3" #define MSG_UNLOAD_FILAMENT_4 "Unload filament 4" #define MSG_UNLOAD_ALL "Unload all" #define MSG_RECTRACT "Rectract" #define MSG_ERROR "ERROR:" #define(length=20) MSG_PREHEAT_NOZZLE "Preheat the nozzle!" #define MSG_SUPPORT "Support" #define(length=20) MSG_CORRECTLY "Changed correctly?" #define MSG_YES "Yes" #define MSG_NO "No" #define(length=19) MSG_NOT_LOADED "Filament not loaded" #define MSG_NOT_COLOR "Color not clear" #define(length=20) MSG_LOADING_FILAMENT "Loading filament" #define(length=20) MSG_PLEASE_WAIT "Please wait" #define MSG_LOADING_COLOR "Loading color" #define MSG_CHANGE_SUCCESS "Change success!" #define(length=20) MSG_PRESS "and press the knob" #define(length=20) MSG_INSERT_FILAMENT "Insert filament" #define(length=20) MSG_CHANGING_FILAMENT "Changing filament!" #define MSG_SILENT_MODE_ON "Mode [silent]" #define MSG_SILENT_MODE_OFF "Mode [high power]" #define(length=20) MSG_REBOOT "Reboot the printer" #define(length=20) MSG_TAKE_EFFECT " for take effect" #define MSG_Enqueing "enqueing \"" #define MSG_POWERUP "PowerUp" #define MSG_CONFIGURATION_VER " Last Updated: " #define MSG_FREE_MEMORY " Free Memory: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " #define MSG_BEGIN_FILE_LIST "Begin file list" #define MSG_END_FILE_LIST "End file list" #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " #define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder " #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " #define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder " #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " #define MSG_HEATING "Heating" #define(length=20) MSG_HEATING_COMPLETE "Heating done." #define MSG_BED_HEATING "Bed Heating" #define MSG_BED_DONE "Bed done" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_ERR_KILLED "Printer halted. kill() called!" #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" #define MSG_RESEND "Resend: " #define MSG_M119_REPORT "Reporting endstop status" #define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_ENDSTOP_OPEN "open" #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" #define MSG_SD_INIT_FAIL "SD init fail" #define MSG_SD_VOL_INIT_FAIL "volume.init failed" #define MSG_SD_OPENROOT_FAIL "openRoot failed" #define MSG_SD_CARD_OK "SD card ok" #define MSG_SD_WORKDIR_FAIL "workDir open failed" #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " #define MSG_SD_FILE_OPENED "File opened: " #define MSG_SD_FILE_SELECTED "File selected" #define MSG_SD_WRITE_TO_FILE "Writing to file: " #define MSG_SD_PRINTING_BYTE "SD printing byte " #define MSG_SD_NOT_PRINTING "Not SD printing" #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " #define MSG_STEPPER_TOO_HIGH "Steprate too high: " #define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Adjusting Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" #define MSG_LANGUAGE_NAME "English" #define MSG_LANGUAGE_SELECT "Select language" #define MSG_PRUSA3D "prusa3d.com" #define MSG_PRUSA3D_FORUM "forum.prusa3d.com" #define MSG_PRUSA3D_HOWTO "howto.prusa3d.com" #define MSG_SELFTEST_ERROR "Selftest error !" #define MSG_SELFTEST_PLEASECHECK "Please check :" #define MSG_SELFTEST_NOTCONNECTED "Not connected" #define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor" #define MSG_SELFTEST_BEDHEATER "Bed / Heater" #define MSG_SELFTEST_WIRINGERROR "Wiring error" #define MSG_SELFTEST_ENDSTOPS "Endstops" #define MSG_SELFTEST_MOTOR "Motor" #define MSG_SELFTEST_ENDSTOP "Endstop" #define MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit" #define MSG_SELFTEST_OK "Self test OK" #define MSG_LOOSE_PULLEY "Loose pulley" #define(length=20) MSG_SELFTEST_FAN "Fan test"; #define(length=20) MSG_SELFTEST_COOLING_FAN "Front print fan?"; #define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Left hotend fan?"; #define MSG_SELFTEST_FAN_YES "Spinning"; #define MSG_SELFTEST_FAN_NO "Not spinning"; #define(length=20) MSG_STATS_TOTALFILAMENT "Total filament :" #define(length=20) MSG_STATS_TOTALPRINTTIME "Total print time :" #define(length=20) MSG_STATS_FILAMENTUSED "Filament used: " #define(length=20) MSG_STATS_PRINTTIME "Print time: " #define(length=20) MSG_SELFTEST_START "Self test start " #define(length=20) MSG_SELFTEST_CHECK_ENDSTOPS "Checking endstops" #define(length=20) MSG_SELFTEST_CHECK_HOTEND "Checking hotend " #define(length=20) MSG_SELFTEST_CHECK_X "Checking X axis " #define(length=20) MSG_SELFTEST_CHECK_Y "Checking Y axis " #define(length=20) MSG_SELFTEST_CHECK_Z "Checking Z axis " #define(length=20) MSG_SELFTEST_CHECK_BED "Checking bed " #define(length=20) MSG_SELFTEST_CHECK_ALLCORRECT "All correct " #define MSG_SELFTEST "Selftest " #define(length=20) MSG_SELFTEST_FAILED "Selftest failed " #define MSG_STATISTICS "Statistics " #define MSG_USB_PRINTING "USB printing " #define MSG_HOMEYZ "Calibrate Z" #define MSG_HOMEYZ_PROGRESS "Calibrating Z" #define MSG_HOMEYZ_DONE "Calibration done" #define MSG_SHOW_END_STOPS "Show end stops" #define MSG_CALIBRATE_BED "Calibrate XYZ" #define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr." #define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done." #define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done." #define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN "Please clean the nozzle for calibration. Click when done." #define(length=20,lines=2) MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Are left and right Z~carriages all up?" #define(length=60) MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Searching bed calibration point" #define(length=14) MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " of 4" #define(length=60) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Improving bed calibration point" #define(length=14) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " of 9" #define(length=60) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Measuring reference height of calibration point" #define(length=14) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " of 9" #define(length=20) MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteration " #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ calibration failed. Bed calibration point was not found." #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ calibration failed. Please consult the manual." #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ calibration all right. X/Y axes are slightly skewed. Good job!" #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ calibration all right. Skew will be corrected automatically." #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ calibration failed. Left front calibration point not reachable." #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ calibration failed. Right front calibration point not reachable." #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ calibration failed. Front calibration points not reachable." #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "XYZ calibration compromised. Left front calibration point not reachable." #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ calibration compromised. Right front calibration point not reachable." #define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ calibration compromised. Front calibration points not reachable." #define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_LOW "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset." #define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_HIGH "Bed leveling failed. Sensor triggered too high. Waiting for reset." #define(length=20,lines=4) MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset." #define(length=20,lines=2) MSG_NEW_FIRMWARE_AVAILABLE "New firmware version available:" #define(length=20) MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Please upgrade." #define(length=20,lines=8) MSG_FOLLOW_CALIBRATION_FLOW "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." #define(length=20,lines=12) MSG_BABYSTEP_Z_NOT_SET "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration." #define(length=20, lines=4) MSG_FILAMENT_LOADING_T0 "Insert filament into extruder 1. Click when done." #define(length=20, lines=4) MSG_FILAMENT_LOADING_T1 "Insert filament into extruder 2. Click when done." #define(length=20, lines=4) MSG_FILAMENT_LOADING_T2 "Insert filament into extruder 3. Click when done." #define(length=20, lines=4) MSG_FILAMENT_LOADING_T3 "Insert filament into extruder 4. Click when done." #define(length=20, lines=1) MSG_CHANGE_EXTR "Change extruder" #define(length=20, lines=4) MSG_FIL_ADJUSTING "Adjusting filaments. Please wait." #define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done." #define(length=20, lines=4) MSG_STACK_ERROR "Error - static memory has been overwritten" #define(length=20, lines=1) MSG_CALIBRATE_E "Calibrate E" //#define(length=20, lines=1) MSG_RESET_CALIBRATE_E "Reset E Cal." #define(length=20, lines=8) MSG_E_CAL_KNOB "Rotate knob until mark reaches extruder body. Click when done." //#define(length=20, lines=1) MSG_FARM_CARD_MENU "Farm mode print" #define(length=20, lines=8) MSG_MARK_FIL "Mark filament 100mm from extruder body. Click when done." #define(length=20, lines=8) MSG_CLEAN_NOZZLE_E "E calibration finished. Please clean the nozzle. Click when done." #define(length=20, lines=3) MSG_WAITING_TEMP "Waiting for nozzle and bed cooling" #define(length=20, lines=2) MSG_FILAMENT_CLEAN "Is color clear?" #define(lenght=20) MSG_UNLOADING_FILAMENT "Unloading filament" #define(length=20, lines=8) MSG_PAPER "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately." #define MSG_BED_CORRECTION_MENU "Bed level correct" #define MSG_BED_CORRECTION_LEFT "Left side um" #define MSG_BED_CORRECTION_RIGHT "Right side um" #define MSG_BED_CORRECTION_FRONT "Front side um" #define MSG_BED_CORRECTION_REAR "Rear side um" #define MSG_BED_CORRECTION_RESET "Reset" #define MSG_MESH_BED_LEVELING "Mesh Bed Leveling" #define MSG_MENU_CALIBRATION "Calibration" #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]" #define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]" #define MSG_PRINTER_DISCONNECTED "Printer disconnected" #define(length=20, lines=1) MSG_FINISHING_MOVEMENTS "Finishing movements" #define(length=20, lines=1) MSG_PRINT_PAUSED "Print paused" #define(length=20, lines=1) MSG_RESUMING_PRINT "Resuming print" #define(length=17, lines=1) MSG_PID_EXTRUDER "PID calibration" #define(length=19, lines=1) MSG_SET_TEMPERATURE "Set temperature:" #define(length=20, lines=1) MSG_PID_FINISHED "PID cal. finished" #define(length=20, lines=1) MSG_PID_RUNNING "PID cal. " #define(length=17, lines=1) MSG_CALIBRATE_PINDA "Calibrate" #define(length=17, lines=1) MSG_CALIBRATION_PINDA_MENU "Temp. calibration" #define(length=20, lines=4) MSG_PINDA_NOT_CALIBRATED "Temperature calibration has not been run yet" #define(length=20, lines=1) MSG_PINDA_PREHEAT "PINDA Heating" #define(length=20, lines=1) MSG_TEMP_CALIBRATION "Temp. cal. " #define(length=20, lines=4) MSG_TEMP_CALIBRATION_DONE "Temperature calibration is finished. Click to continue." #define(length=20, lines=1) MSG_TEMP_CALIBRATION_ON "Temp. cal. [ON]" #define(length=20, lines=1) MSG_TEMP_CALIBRATION_OFF "Temp. cal. [OFF]"