/**
 * English
 *
 * LCD Menu Messages
 * Please note these are limited to 17 characters!
 *
 */

#define(length=20) WELCOME_MSG              CUSTOM_MENDEL_NAME " ready."
#define MSG_SD_INSERTED                     "Card inserted"
#define MSG_SD_REMOVED                      "Card removed"
#define MSG_MAIN                            "Main"
#define MSG_DISABLE_STEPPERS                "Disable steppers"
#define MSG_AUTO_HOME                       "Auto home"
#define MSG_SET_HOME_OFFSETS                "Set home offsets"
#define MSG_SET_ORIGIN                      "Set origin"
#define MSG_COOLDOWN                        "Cooldown"
#define MSG_SWITCH_PS_ON                    "Switch power on"
#define MSG_SWITCH_PS_OFF                   "Switch power off"
#define MSG_MOVE_AXIS                       "Move axis"
#define MSG_MOVE_X                          "Move X"
#define MSG_MOVE_Y                          "Move Y"
#define MSG_MOVE_Z                          "Move Z"
#define MSG_MOVE_E                          "Extruder"
#define MSG_SPEED                           "Speed"
#define MSG_NOZZLE                          "Nozzle"
#define MSG_NOZZLE1                         "Nozzle2"
#define MSG_NOZZLE2                         "Nozzle3"
#define MSG_BED                             "Bed"
#define MSG_FAN_SPEED                       "Fan speed"
#define MSG_FLOW                            "Flow"
#define MSG_FLOW0                           "Flow 0"
#define MSG_FLOW1                           "Flow 1"
#define MSG_FLOW2                           "Flow 2"
#define MSG_CONTROL                         "Control"
#define MSG_MIN                             " \002 Min"
#define MSG_MAX                             " \002 Max"
#define MSG_FACTOR                          " \002 Fact"
#define MSG_TEMPERATURE                     "Temperature"
#define MSG_MOTION                          "Motion"
#define MSG_VOLUMETRIC                      "Filament"
#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
#define MSG_STORE_EPROM                     "Store memory"
#define MSG_LOAD_EPROM                      "Load memory"
#define MSG_RESTORE_FAILSAFE                "Restore failsafe"
#define MSG_REFRESH                         "\xF8" "Refresh"
#define MSG_WATCH                           "Info screen"
#define MSG_TUNE                            "Tune"
#define MSG_PAUSE_PRINT                     "Pause print"
#define MSG_RESUME_PRINT                    "Resume print"
#define MSG_STOP_PRINT                      "Stop print"
#define MSG_CARD_MENU                       "Print from SD"
#define MSG_NO_CARD                         "No SD card"
#define MSG_DWELL                           "Sleep..."
#define MSG_USERWAIT                        "Wait for user..."
#define MSG_RESUMING                        "Resuming print"
#define(length=20) MSG_PRINT_ABORTED        "Print aborted"
#define MSG_NO_MOVE                         "No move."
#define MSG_KILLED                          "KILLED. "
#define MSG_STOPPED                         "STOPPED. "
#define MSG_FILAMENTCHANGE                  "Change filament"
#define MSG_INIT_SDCARD                     "Init. SD card"
#define MSG_CNG_SDCARD                      "Change SD card"
#define MSG_BABYSTEP_X                      "Babystep X"
#define MSG_BABYSTEP_Y                      "Babystep Y"
#define MSG_BABYSTEP_Z                      "Live adjust Z"
#define MSG_ADJUSTZ							"Auto adjust Z ?"
#define MSG_PICK_Z							"Pick print"

#define MSG_SETTINGS                         "Settings"
#define MSG_PREHEAT                         "Preheat"
#define MSG_UNLOAD_FILAMENT                 "Unload filament"
#define MSG_LOAD_FILAMENT                 "Load filament"

#define MSG_RECTRACT                        "Rectract"
#define MSG_ERROR                        "ERROR:"
#define(length=20) MSG_PREHEAT_NOZZLE       "Preheat the nozzle!"
#define MSG_SUPPORT "Support"
#define(length=20) MSG_CORRECTLY			"Changed correctly?"
#define MSG_YES					"Yes"
#define MSG_NO					"No"
#define(length=19) MSG_NOT_LOADED 			"Filament not loaded"
#define MSG_NOT_COLOR 			"Color not clear"
#define(length=20) MSG_LOADING_FILAMENT		"Loading filament"
#define(length=20) MSG_PLEASE_WAIT			"Please wait"
#define MSG_LOADING_COLOR		"Loading color"
#define MSG_CHANGE_SUCCESS		"Change success!"
#define(length=20) MSG_PRESS				"And press the knob"
#define(length=20) MSG_INSERT_FILAMENT		"Insert filament"
#define(length=20) MSG_CHANGING_FILAMENT	"Changing filament!"


#define MSG_SILENT_MODE_ON					"Mode     [silent]"
#define MSG_SILENT_MODE_OFF					"Mode [high power]" 
#define(length=20) MSG_REBOOT				"Reboot the printer"
#define(length=20) MSG_TAKE_EFFECT			" for take effect"											

#define MSG_Enqueing                        "enqueing \""
#define MSG_POWERUP                         "PowerUp"
#define MSG_CONFIGURATION_VER               " Last Updated: "
#define MSG_FREE_MEMORY                     " Free Memory: "
#define MSG_PLANNER_BUFFER_BYTES            "  PlannerBufferBytes: "
#define MSG_OK                              "ok"
#define MSG_ERR_CHECKSUM_MISMATCH           "checksum mismatch, Last Line: "
#define MSG_ERR_NO_CHECKSUM                 "No Checksum with line number, Last Line: "
#define MSG_BEGIN_FILE_LIST                 "Begin file list"
#define MSG_END_FILE_LIST                   "End file list"
#define MSG_M104_INVALID_EXTRUDER           "M104 Invalid extruder "
#define MSG_M105_INVALID_EXTRUDER           "M105 Invalid extruder "
#define MSG_M200_INVALID_EXTRUDER           "M200 Invalid extruder "
#define MSG_M218_INVALID_EXTRUDER           "M218 Invalid extruder "
#define MSG_M221_INVALID_EXTRUDER           "M221 Invalid extruder "
#define MSG_ERR_NO_THERMISTORS              "No thermistors - no temperature"
#define MSG_M109_INVALID_EXTRUDER           "M109 Invalid extruder "
#define MSG_HEATING                         "Heating"
#define(length=20) MSG_HEATING_COMPLETE     "Heating done."
#define MSG_BED_HEATING                     "Bed Heating"
#define MSG_BED_DONE                        "Bed done"
#define MSG_M115_REPORT                     "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
#define MSG_ERR_KILLED                      "Printer halted. kill() called!"
#define MSG_ERR_STOPPED                     "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#define MSG_RESEND                          "Resend: "
#define MSG_M119_REPORT                     "Reporting endstop status"
#define MSG_ENDSTOP_HIT                     "TRIGGERED"
#define MSG_ENDSTOP_OPEN                    "open"

#define MSG_SD_CANT_OPEN_SUBDIR             "Cannot open subdir"
#define MSG_SD_INIT_FAIL                    "SD init fail"
#define MSG_SD_VOL_INIT_FAIL                "volume.init failed"
#define MSG_SD_OPENROOT_FAIL                "openRoot failed"
#define MSG_SD_CARD_OK                      "SD card ok"
#define MSG_SD_WORKDIR_FAIL                 "workDir open failed"
#define MSG_SD_OPEN_FILE_FAIL               "open failed, File: "
#define MSG_SD_FILE_OPENED                  "File opened: "
#define MSG_SD_FILE_SELECTED                "File selected"
#define MSG_SD_WRITE_TO_FILE                "Writing to file: "
#define MSG_SD_PRINTING_BYTE                "SD printing byte "
#define MSG_SD_NOT_PRINTING                 "Not SD printing"
#define MSG_SD_ERR_WRITE_TO_FILE            "error writing to file"
#define MSG_SD_CANT_ENTER_SUBDIR            "Cannot enter subdir: "

#define MSG_STEPPER_TOO_HIGH                "Steprate too high: "
#define MSG_ENDSTOPS_HIT                    "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP           " cold extrusion prevented"
#define MSG_BABYSTEPPING_X                  "Babystepping X"
#define MSG_BABYSTEPPING_Y                  "Babystepping Y"
#define MSG_BABYSTEPPING_Z                  "Adjusting Z"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE     "Error in menu structure"

#define MSG_LANGUAGE_NAME					"English"
#define MSG_LANGUAGE_SELECT					"Select language"
#define MSG_PRUSA3D							"prusa3d.com"
#define MSG_PRUSA3D_FORUM					"forum.prusa3d.com"
#define MSG_PRUSA3D_HOWTO					"howto.prusa3d.com"

#define MSG_SELFTEST_ERROR					"Selftest error !"
#define MSG_SELFTEST_PLEASECHECK			"Please check :"	
#define MSG_SELFTEST_NOTCONNECTED			"Not connected"
#define MSG_SELFTEST_HEATERTHERMISTOR		"Heater/Thermistor"
#define MSG_SELFTEST_BEDHEATER				"Bed / Heater"
#define MSG_SELFTEST_WIRINGERROR			"Wiring error"
#define MSG_SELFTEST_ENDSTOPS				"Endstops"
#define MSG_SELFTEST_MOTOR					"Motor"
#define MSG_SELFTEST_ENDSTOP				"Endstop"
#define MSG_SELFTEST_ENDSTOP_NOTHIT			"Endstop not hit"
#define MSG_SELFTEST_OK						"Self test OK"
#define MSG_SELFTEST_COOLING_FAN			"Print fan ok ?";
#define MSG_SELFTEST_EXTRUDER_FAN			"Fan ok ?";
#define(length=20) MSG_STATS_TOTALFILAMENT	"Total filament :"
#define(length=20) MSG_STATS_TOTALPRINTTIME "Total print time :"
#define(length=20) MSG_STATS_FILAMENTUSED	"Filament used:  "
#define(length=20) MSG_STATS_PRINTTIME		"Print time:  "
#define(length=20) MSG_SELFTEST_START				"Self test start  "
#define(length=20) MSG_SELFTEST_CHECK_ENDSTOPS		"Checking endstops"
#define(length=20) MSG_SELFTEST_CHECK_HOTEND		"Checking hotend  "  
#define(length=20) MSG_SELFTEST_CHECK_X				"Checking X axis  "
#define(length=20) MSG_SELFTEST_CHECK_Y				"Checking Y axis  "
#define(length=20) MSG_SELFTEST_CHECK_Z				"Checking Z axis  "
#define(length=20) MSG_SELFTEST_CHECK_BED			"Checking bed     "
#define(length=20) MSG_SELFTEST_CHECK_ALLCORRECT	"All correct      "
#define MSG_SELFTEST						"Selftest         "
#define(length=20) MSG_SELFTEST_FAILED		"Selftest failed  "
#define MSG_STATISTICS						"Statistics  "
#define MSG_USB_PRINTING					"USB printing  "
#define MSG_HOMEYZ                          "Calibrate Z"
#define MSG_HOMEYZ_PROGRESS                 "Calibrating Z"
#define MSG_HOMEYZ_DONE		                "Calibration done"

#define MSG_SHOW_END_STOPS					"Show end stops"
#define MSG_CALIBRATE_BED					"Calibrate XYZ"
#define MSG_CALIBRATE_BED_RESET				"Reset XYZ calibr."

#define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP 	"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
#define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP_Z 	"Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."

#define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN			"Please clean the nozzle for calibration. Click when done."
#define(length=20,lines=2) MSG_CONFIRM_CARRIAGE_AT_THE_TOP	"Are left and right Z~carriages all up?"

#define(length=60) MSG_FIND_BED_OFFSET_AND_SKEW_LINE1		"Searching bed calibration point"
#define(length=14) MSG_FIND_BED_OFFSET_AND_SKEW_LINE2		" of 4"
#define(length=60) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1	"Improving bed calibration point"
#define(length=14) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2	" of 9"
#define(length=60) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1	"Measuring reference height of calibration point"
#define(length=14) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2	" of 9"

#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND			"XYZ calibration failed. Bed calibration point was not found."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED				"XYZ calibration failed. Please consult the manual."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_PERFECT					"XYZ calibration ok. X/Y axes are perpendicular."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD					"XYZ calibration all right. X/Y axes are slightly skewed."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME				"X/Y skewed severly. Skew will be corrected automatically."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR		"XYZ calibration failed. Left front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR		"XYZ calibration failed. Right front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR		"XYZ calibration failed. Front calibration points not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR		"XYZ calibration compromised. Left front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR	"XYZ calibration compromised. Right front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR		"XYZ calibration compromised. Front calibration points not reachable."

#define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_LOW						"Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
#define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_HIGH						"Bed leveling failed. Sensor triggered too high. Waiting for reset."
#define(length=20,lines=4) MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED				"Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."

#define(length=20,lines=2) MSG_NEW_FIRMWARE_AVAILABLE								"New firmware version available:"
#define(length=20) MSG_NEW_FIRMWARE_PLEASE_UPGRADE									"Please upgrade."

#define(length=20,lines=8) MSG_FOLLOW_CALIBRATION_FLOW								"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
#define(length=20,lines=12) MSG_BABYSTEP_Z_NOT_SET									"Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."

#define MSG_BED_CORRECTION_MENU									"Bed level correct"
#define MSG_BED_CORRECTION_LEFT									"Left side  um"
#define MSG_BED_CORRECTION_RIGHT								"Right side um"
#define MSG_BED_CORRECTION_FRONT								"Front side um"
#define MSG_BED_CORRECTION_REAR									"Rear side  um"
#define MSG_BED_CORRECTION_RESET								"Reset"

#define MSG_MESH_BED_LEVELING									"Mesh Bed Leveling"
#define MSG_MENU_CALIBRATION									"Calibration"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF					"SD card [normal]"
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON					"SD card [FlshAir]"