# Translation of Prusa-Firmware into French.
#
msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: fr\n"
"Project-Id-Version: Prusa-Firmware\n"
"POT-Creation-Date: Tue May 12 21:09:46 CEST 2020\n"
"PO-Revision-Date: Tue May 12 21:09:46 CEST 2020\n"
"Language-Team: \n"
"X-Generator: Poedit 2.0.7\n"
"X-Poedit-SourceCharset: UTF-8\n"
"Last-Translator: \n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"

# 
#: 
msgid "[%.7s]Live adj. Z\x0avalue set, continue\x0aor start from zero?\x0a%cContinue%cReset"
msgstr "[%.7s]Ajust. du Z\x0aValeur enreg, contin\x0aou depart a zero?\x0a%cContinuer%cReset"

# MSG_03_OR_OLDER c=18
#: messages.c:144
msgid " 0.3 or older"
msgstr " 0.3 ou +ancien"

# MSG_04_OR_NEWER c=18
#: messages.c:143
msgid " 0.4 or newer"
msgstr " 0.4 ou +recent"

# MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
#: messages.c:36
msgid " of 4"
msgstr " de 4"

# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
#: messages.c:56
msgid " of 9"
msgstr " de 9"

# MSG_MEASURED_OFFSET
#: ultralcd.cpp:3064
msgid "[0;0] point offset"
msgstr "Offset point [0;0]"

# MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
#: 
msgid "Crash detection can\x0abe turned on only in\x0aNormal mode"
msgstr "La detection de\x0acrash peut etre\x0aactive seulement en\x0amode Normal"

# MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
#: 
msgid "WARNING:\x0aCrash detection\x0adisabled in\x0aStealth mode"
msgstr "ATTENTION:\x0aDetection de crash\x0adesactivee en\x0amode furtif"

# 
#: ultralcd.cpp:2460
msgid ">Cancel"
msgstr ">Annuler"

# MSG_BABYSTEPPING_Z c=15
#: ultralcd.cpp:3184
msgid "Adjusting Z:"
msgstr "Ajuster Z:"

# MSG_SELFTEST_CHECK_ALLCORRECT c=20
#: ultralcd.cpp:8679
msgid "All correct      "
msgstr "Tout est correct"

# MSG_WIZARD_DONE c=20 r=8
#: messages.c:99
msgid "All is done. Happy printing!"
msgstr "Tout est pret. Bonne impression!"

# 
#: ultralcd.cpp:1956
msgid "Ambient"
msgstr "Ambiant"

# MSG_AUTO c=6
#: messages.c:140
msgid "Auto"
msgstr ""

# MSG_PRESS c=20 r=2
#: ultralcd.cpp:2609
msgid "and press the knob"
msgstr "et appuyez sur le bouton"

# MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
#: ultralcd.cpp:3506
msgid "Are left and right Z~carriages all up?"
msgstr "Z~carriages gauche + droite tout en haut?"

# MSG_AUTO_DEPLETE c=17 r=1
#: messages.c:108
msgid "SpoolJoin"
msgstr ""

# MSG_AUTO_HOME
#: messages.c:11
msgid "Auto home"
msgstr "Mise a 0 des axes"

# MSG_AUTOLOAD_FILAMENT c=18
#: ultralcd.cpp:6961
msgid "AutoLoad filament"
msgstr "Autocharge du fil."

# MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
#: ultralcd.cpp:4445
msgid "Autoloading filament available only when filament sensor is turned on..."
msgstr "Chargement auto du filament uniquement si le capteur de filament est active."

# MSG_AUTOLOADING_ENABLED c=20 r=4
#: ultralcd.cpp:2804
msgid "Autoloading filament is active, just press the knob and insert filament..."
msgstr "Chargement auto. du fil. active, appuyez sur le bouton et inserez le fil."

# MSG_SELFTEST_AXIS_LENGTH
#: ultralcd.cpp:8327
msgid "Axis length"
msgstr "Longueur de l'axe"

# MSG_SELFTEST_AXIS
#: ultralcd.cpp:8329
msgid "Axis"
msgstr "Axe"

# MSG_SELFTEST_BEDHEATER
#: ultralcd.cpp:8271
msgid "Bed / Heater"
msgstr "Lit / Chauffage"

# MSG_BED_DONE
#: messages.c:15
msgid "Bed done"
msgstr "Plateau termine"

# MSG_BED_HEATING
#: messages.c:16
msgid "Bed Heating"
msgstr "Chauffe du lit"

# MSG_BED_CORRECTION_MENU
#: ultralcd.cpp:5861
msgid "Bed level correct"
msgstr "Corr. niveau plateau"

# MSG_BELTTEST c=17
#: ultralcd.cpp:5841
msgid "Belt test        "
msgstr "Test de courroie "

# MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=5
#: messages.c:17
msgid "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
msgstr "Capt. non declenche pendant que je nivele le plateau. Debris sur buse? En attente d'un reset."

# MSG_BRIGHT c=6
#: messages.c:138
msgid "Bright"
msgstr "Brill."

# MSG_BRIGHTNESS c=18
#: messages.c:134
msgid "Brightness"
msgstr "Luminosite"

# MSG_BED
#: messages.c:14
msgid "Bed"
msgstr "Lit"

# MSG_MENU_BELT_STATUS c=18
#: ultralcd.cpp:2009
msgid "Belt status"
msgstr "Statut courroie"

# MSG_RECOVER_PRINT c=20 r=2
#: messages.c:67
msgid "Blackout occurred. Recover print?"
msgstr "Coupure detectee. Reprendre impression?"

# 
#: ultralcd.cpp:8681
msgid "Calibrating home"
msgstr "Calib. mise a 0"

# MSG_CALIBRATE_BED
#: ultralcd.cpp:5850
msgid "Calibrate XYZ"
msgstr "Calibrer XYZ"

# MSG_HOMEYZ
#: messages.c:44
msgid "Calibrate Z"
msgstr "Calibrer Z"

# MSG_CALIBRATE_PINDA c=17 r=1
#: ultralcd.cpp:4637
msgid "Calibrate"
msgstr "Calibrer"

# MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
#: ultralcd.cpp:3469
msgid "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
msgstr "Calibration de XYZ. Tournez le bouton pour faire monter l'extrudeur dans l'axe Z jusqu'aux butees. Cliquez une fois fait."

# MSG_CALIBRATE_Z_AUTO c=20 r=2
#: messages.c:19
msgid "Calibrating Z"
msgstr "Calibration Z"

# MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
#: ultralcd.cpp:3469
msgid "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
msgstr "Calibration de Z. Tournez le bouton pour faire monter l'extrudeur dans l'axe Z jusqu'aux butees. Cliquez une fois fait."

# MSG_HOMEYZ_DONE
#: ultralcd.cpp:865
msgid "Calibration done"
msgstr "Calibration terminee"

# MSG_MENU_CALIBRATION
#: messages.c:57
msgid "Calibration"
msgstr ""

# 
#: ultralcd.cpp:4815
msgid "Cancel"
msgstr "Annuler"

# MSG_SD_REMOVED
#: ultralcd.cpp:9092
msgid "Card removed"
msgstr "Carte retiree"

# MSG_NOT_COLOR
#: ultralcd.cpp:2709
msgid "Color not correct"
msgstr "Couleur incorrecte"

# MSG_COOLDOWN
#: messages.c:22
msgid "Cooldown"
msgstr "Refroidissement"

# 
#: ultralcd.cpp:4570
msgid "Copy selected language?"
msgstr "Copier la langue choisie?"

# MSG_CRASHDETECT c=13
#: messages.c:24
msgid "Crash det."
msgstr "Detect.crash"

# 
#: ultralcd.cpp:4950
msgid "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
msgstr "Choisissez un filament pour la Calibration de la Premiere Couche et selectionnez-le depuis le menu a l'ecran."

# MSG_CRASH_DETECTED c=20 r=1
#: messages.c:23
msgid "Crash detected."
msgstr "Crash detecte."

# 
#: Marlin_main.cpp:607
msgid "Crash detected. Resume print?"
msgstr "Crash detecte. Poursuivre l'impression?"

# 
#: ultralcd.cpp:1785
msgid "Crash"
msgstr ""

# MSG_CURRENT c=19 r=1
#: ultralcd.cpp:6002
msgid "Current"
msgstr "Actuel"

# MSG_DATE c=17 r=1
#: ultralcd.cpp:2163
msgid "Date:"
msgstr "Date:"

# MSG_DISABLE_STEPPERS
#: ultralcd.cpp:5743
msgid "Disable steppers"
msgstr "Desactiver moteurs"

# MSG_BABYSTEP_Z_NOT_SET c=20 r=12
#: messages.c:13
msgid "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
msgstr "La distance entre la pointe de la buse et la surface du plateau n'a pas encore ete reglee. Suivez le manuel, chapitre Premiers pas, section Calibration de la premiere couche."

# MSG_FS_CONTINUE c=5
#: messages.c:132
msgid "Cont."
msgstr ""

# MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
#: ultralcd.cpp:5125
msgid "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
msgstr "Voulez-vous refaire l'etape pour reajuster la hauteur entre la buse et le plateau chauffant?"

# MSG_EXTRUDER_CORRECTION c=13
#: ultralcd.cpp:5194
msgid "E-correct:"
msgstr "Correct-E:"

# MSG_EJECT_FILAMENT c=17 r=1
#: messages.c:49
msgid "Eject filament"
msgstr "Remonter le fil."

# MSG_EJECTING_FILAMENT c=20 r=1
#: mmu.cpp:1416
msgid "Ejecting filament"
msgstr "Le fil. remonte"

# MSG_SELFTEST_ENDSTOP_NOTHIT c=20
#: ultralcd.cpp:8295
msgid "Endstop not hit"
msgstr "Butee non atteinte"

# MSG_SELFTEST_ENDSTOP
#: ultralcd.cpp:8289
msgid "Endstop"
msgstr "Butee"

# MSG_SELFTEST_ENDSTOPS
#: ultralcd.cpp:8277
msgid "Endstops"
msgstr "Butees"

# MSG_STACK_ERROR c=20 r=4
#: ultralcd.cpp:6998
msgid "Error - static memory has been overwritten"
msgstr "Erreur - la memoire statique a ete ecrasee"

# MSG_CUT_FILAMENT c=16
#: messages.c:50
msgid "Cut filament"
msgstr "Coupe filament"

# MSG_CUTTER c=9
#: messages.c:109
msgid "Cutter"
msgstr "Coupeur"

#  c=18
#: mmu.cpp:1388
msgid "Cutting filament"
msgstr "Je coupe filament"

# MSG_FSENS_NOT_RESPONDING c=20 r=4
#: ultralcd.cpp:4458
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr "ERREUR: Le capteur de filament ne repond pas, verifiez le branchement."

# MSG_DIM c=6
#: messages.c:139
msgid "Dim"
msgstr ""

# MSG_ERROR
#: messages.c:25
msgid "ERROR:"
msgstr "ERREUR:"

# MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
#: ultralcd.cpp:8688
msgid "Extruder fan:"
msgstr "Ventilo extrudeur:"

# MSG_INFO_EXTRUDER c=18
#: ultralcd.cpp:2211
msgid "Extruder info"
msgstr "Infos extrudeur"

# MSG_MOVE_E
#: messages.c:26
msgid "Extruder"
msgstr "Extrudeur"

# 
#: ultralcd.cpp:6985
msgid "Fail stats MMU"
msgstr "Stat. d'echec MMU"

# MSG_FSENSOR_AUTOLOAD c=13
#: messages.c:40
msgid "F. autoload"
msgstr "F. autocharg."

# 
#: ultralcd.cpp:6982
msgid "Fail stats"
msgstr "Stat. d'echec"

# MSG_FAN_SPEED c=14
#: messages.c:28
msgid "Fan speed"
msgstr "Vitesse vent."

# MSG_SELFTEST_FAN c=20
#: messages.c:74
msgid "Fan test"
msgstr "Test du ventilateur"

# MSG_FANS_CHECK
#: ultralcd.cpp:5751
msgid "Fans check"
msgstr "Verif vent."

# MSG_FSENSOR
#: messages.c:41
msgid "Fil. sensor"
msgstr "Capteur Fil."

#  c=14
#: ultralcd.cpp:1784
msgid "Filam. runouts"
msgstr "Fins filament"

# MSG_FILAMENT_CLEAN c=20 r=2
#: messages.c:29
msgid "Filament extruding & with correct color?"
msgstr "Filament extrude et avec bonne couleur?"

# MSG_NOT_LOADED c=19
#: ultralcd.cpp:2705
msgid "Filament not loaded"
msgstr "Filament non charge"

# MSG_FILAMENT_SENSOR c=20
#: messages.c:80
msgid "Filament sensor"
msgstr "Capteur de filament"

# MSG_FILAMENT_USED c=19
#: ultralcd.cpp:2869
msgid "Filament used"
msgstr "Filament utilise"

# MSG_PRINT_TIME c=19 r=1
#: ultralcd.cpp:2870
msgid "Print time"
msgstr "Temps d'impression"

# MSG_FS_ACTION c=10
#: messages.c:131
msgid "FS Action"
msgstr ""

#  c=18
#: Marlin_main.cpp:9512
msgid "FS v0.4 or newer"
msgstr "FS v0.4 ou +recent"

# MSG_FILE_INCOMPLETE c=20 r=3
#: ultralcd.cpp:8816
msgid "File incomplete. Continue anyway?"
msgstr "Fichier incomplet. Continuer qd meme?"

# MSG_FINISHING_MOVEMENTS c=20
#: messages.c:37
msgid "Finishing movements"
msgstr "Mouvement final"

# MSG_V2_CALIBRATION c=18
#: messages.c:103
msgid "First layer cal."
msgstr "Cal. 1ere couche"

# MSG_WIZARD_SELFTEST c=20 r=8
#: ultralcd.cpp:5046
msgid "First, I will run the selftest to check most common assembly problems."
msgstr "D'abord, je vais lancer le Auto-test pour verifier les problemes d'assemblage les plus communs."

# 
#: mmu.cpp:727
msgid "Fix the issue and then press button on MMU unit."
msgstr "Corrigez le probleme et appuyez sur le bouton sur la MMU."

# MSG_FLOW
#: ultralcd.cpp:7125
msgid "Flow"
msgstr "Flux"

# MSG_PRUSA3D_FORUM
#: ultralcd.cpp:2156
msgid "forum.prusa3d.com"
msgstr ""

# MSG_SELFTEST_COOLING_FAN c=20
#: messages.c:71
msgid "Front print fan?"
msgstr "Ventilo impr avant?"

# MSG_BED_CORRECTION_FRONT c=14 r=1
#: ultralcd.cpp:3266
msgid "Front side[um]"
msgstr "Avant [um]"

# MSG_SELFTEST_FANS
#: ultralcd.cpp:8335
msgid "Front/left fans"
msgstr "Ventilos avt/gauche"

# MSG_SELFTEST_HEATERTHERMISTOR
#: ultralcd.cpp:8265
msgid "Heater/Thermistor"
msgstr "Chauffage/Thermistor"

# MSG_BED_HEATING_SAFETY_DISABLED
#: Marlin_main.cpp:9440
msgid "Heating disabled by safety timer."
msgstr "Chauffage desactivee par le compteur de securite."

# MSG_HEATING_COMPLETE c=20
#: messages.c:43
msgid "Heating done."
msgstr "Chauffe terminee."

# MSG_HEATING
#: messages.c:42
msgid "Heating"
msgstr "Chauffe"

# MSG_WIZARD_WELCOME c=20 r=7
#: ultralcd.cpp:5025
msgid "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
msgstr "Bonjour, je suis votre imprimante Original Prusa i3. Voulez-vous que je vous guide a travers le processus d'installation?"

# MSG_PRUSA3D_HOWTO
#: ultralcd.cpp:2157
msgid "howto.prusa3d.com"
msgstr ""

# MSG_FILAMENTCHANGE
#: messages.c:34
msgid "Change filament"
msgstr "Changer filament"

# MSG_CHANGE_SUCCESS
#: ultralcd.cpp:2620
msgid "Change success!"
msgstr "Changement reussi!"

# MSG_CORRECTLY c=20
#: ultralcd.cpp:2697
msgid "Changed correctly?"
msgstr "Change correctement?"

# MSG_SELFTEST_CHECK_BED c=20
#: messages.c:77
msgid "Checking bed     "
msgstr "Verif. plateau chauf"

# MSG_SELFTEST_CHECK_ENDSTOPS c=20
#: ultralcd.cpp:8670
msgid "Checking endstops"
msgstr "Verification butees"

# MSG_SELFTEST_CHECK_HOTEND c=20
#: ultralcd.cpp:8676
msgid "Checking hotend  "
msgstr "Verif. du hotend"

# MSG_SELFTEST_CHECK_FSENSOR c=20
#: messages.c:78
msgid "Checking sensors "
msgstr "Verif. des capteurs"

# MSG_SELFTEST_CHECK_X c=20
#: ultralcd.cpp:7482
msgid "Checking X axis  "
msgstr "Verification axe X"

# MSG_SELFTEST_CHECK_Y c=20
#: ultralcd.cpp:7491
msgid "Checking Y axis  "
msgstr "Verification axe Y"

# MSG_SELFTEST_CHECK_Z c=20
#: ultralcd.cpp:8673
msgid "Checking Z axis  "
msgstr "Verification axe Z"

# MSG_CHOOSE_EXTRUDER c=20 r=1
#: messages.c:45
msgid "Choose extruder:"
msgstr "Choisir extrudeur:"

# MSG_CHOOSE_FILAMENT c=20 r=1
#: messages.c:46
msgid "Choose filament:"
msgstr "Choix du filament:"

# MSG_FILAMENT c=17 r=1
#: messages.c:27
msgid "Filament"
msgstr ""

# MSG_WIZARD_XYZ_CAL c=20 r=8
#: ultralcd.cpp:5055
msgid "I will run xyz calibration now. It will take approx. 12 mins."
msgstr "Je vais maintenant lancer la calibration XYZ. Cela prendra 12 min environ."

# MSG_WIZARD_Z_CAL c=20 r=8
#: ultralcd.cpp:5063
msgid "I will run z calibration now."
msgstr "Je vais maintenant lancer la calibration Z."

# MSG_WATCH
#: messages.c:97
msgid "Info screen"
msgstr "Ecran d'info"

# MSG_INSERT_FILAMENT c=20
#: ultralcd.cpp:2605
msgid "Insert filament"
msgstr "Inserez le filament"

# MSG_WIZARD_FILAMENT_LOADED c=20 r=2
#: ultralcd.cpp:4835
msgid "Is filament loaded?"
msgstr "Fil. est-il charge?"

# MSG_STEEL_SHEET_CHECK c=20 r=2
#: messages.c:90
msgid "Is steel sheet on heatbed?"
msgstr "Est la plaque sur le plat. chauffant?"

# 
#: ultralcd.cpp:1727
msgid "Last print failures"
msgstr "Echecs derniere imp."

# 
#: ultralcd.cpp:5133
msgid "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets."
msgstr "Si vous avez d'autres feuilles d'acier,  calibrez leurs pre-reglages dans Reglages - Config HW - Plaque en acier."

# 
#: ultralcd.cpp:1704
msgid "Last print"
msgstr "Derniere impres."

# MSG_SELFTEST_EXTRUDER_FAN c=20
#: messages.c:72
msgid "Left hotend fan?"
msgstr "Ventilo gauche?"

# 
#: ultralcd.cpp:2993
msgid "Left"
msgstr "Gauche"

# MSG_BED_CORRECTION_LEFT c=14 r=1
#: ultralcd.cpp:3264
msgid "Left side [um]"
msgstr "Gauche [um]"

# 
#: ultralcd.cpp:5766
msgid "Lin. correction"
msgstr "Correction lin."

# MSG_BABYSTEP_Z
#: messages.c:12
msgid "Live adjust Z"
msgstr "Ajuster Z en dir."

#  c=20 r=6
#: ultralcd.cpp:7527
msgid "Insert the filament (do not load it) into the extruder and then press the knob."
msgstr "Veuillez inserer le filament ( ne le chargez pas) dans l'extrudeur, puis appuyez sur le bouton."

# MSG_LOAD_FILAMENT c=17
#: messages.c:47
msgid "Load filament"
msgstr "Charger filament"

# MSG_LOADING_COLOR
#: ultralcd.cpp:2645
msgid "Loading color"
msgstr "Charg. de la couleur"

# MSG_LOADING_FILAMENT c=20
#: messages.c:48
msgid "Loading filament"
msgstr "Chargement du fil."

# MSG_LOOSE_PULLEY c=20 r=1
#: ultralcd.cpp:8319
msgid "Loose pulley"
msgstr "Poulie lache"

# 
#: ultralcd.cpp:6944
msgid "Load to nozzle"
msgstr "Charger la buse"

# MSG_M117_V2_CALIBRATION c=25
#: messages.c:51
msgid "M117 First layer cal."
msgstr "M117 Cal. 1ere couche"

# MSG_MAIN
#: messages.c:52
msgid "Main"
msgstr "Menu principal"

# MSG_BL_HIGH c=12
#: messages.c:135
msgid "Level Bright"
msgstr "Niveau brill"

# MSG_BL_LOW c=12
#: messages.c:136
msgid "Level Dimmed"
msgstr ""

# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
#: messages.c:55
msgid "Measuring reference height of calibration point"
msgstr "Je mesure la hauteur de reference du point de calibrage"

# MSG_MESH_BED_LEVELING
#: ultralcd.cpp:5856
msgid "Mesh Bed Leveling"
msgstr ""

# MSG_MMU_OK_RESUMING_POSITION c=20 r=4
#: mmu.cpp:765
msgid "MMU OK. Resuming position..."
msgstr "MMU OK. Reprise de la position ..."

# MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
#: mmu.cpp:758
msgid "MMU OK. Resuming temperature..."
msgstr "MMU OK. Rechauffage de la buse..."

# 
#: ultralcd.cpp:3034
msgid "Measured skew"
msgstr "Deviat.mesuree"

# 
#: ultralcd.cpp:1728
msgid "MMU fails"
msgstr "Echecs MMU"

# 
#: mmu.cpp:1588
msgid "MMU load failed     "
msgstr "Echec chargement MMU"

# 
#: ultralcd.cpp:1729
msgid "MMU load fails"
msgstr "Echecs charg. MMU"

# MSG_MMU_OK_RESUMING c=20 r=4
#: mmu.cpp:776
msgid "MMU OK. Resuming..."
msgstr "MMU OK. Reprise ..."

# MSG_MODE
#: messages.c:84
msgid "Mode"
msgstr ""

#  c=20 r=3
#: Marlin_main.cpp:879
msgid "MK3 firmware detected on MK3S printer"
msgstr "Firmware MK3 detecte sur imprimante MK3S"

# MSG_NORMAL
#: messages.c:88
msgid "Normal"
msgstr ""

# MSG_SILENT
#: messages.c:87
msgid "Silent"
msgstr "Furtif"

# 
#: mmu.cpp:722
msgid "MMU needs user attention."
msgstr "Le MMU necessite l'attention de l'utilisateur."

# 
#: ultralcd.cpp:1755
msgid "MMU power fails"
msgstr "Echecs alim. MMU"

# MSG_STEALTH
#: messages.c:89
msgid "Stealth"
msgstr "Furtif"

# MSG_AUTO_POWER
#: messages.c:86
msgid "Auto power"
msgstr "Puiss.auto"

# MSG_HIGH_POWER
#: messages.c:85
msgid "High power"
msgstr "Haute puiss"

# 
#: ultralcd.cpp:2186
msgid "MMU2 connected"
msgstr "MMU2 connecte"

# MSG_SELFTEST_MOTOR
#: messages.c:79
msgid "Motor"
msgstr "Moteur"

# MSG_MOVE_AXIS
#: ultralcd.cpp:5741
msgid "Move axis"
msgstr "Deplacer l'axe"

# MSG_MOVE_X
#: ultralcd.cpp:4361
msgid "Move X"
msgstr "Deplacer X"

# MSG_MOVE_Y
#: ultralcd.cpp:4362
msgid "Move Y"
msgstr "Deplacer Y"

# MSG_MOVE_Z
#: ultralcd.cpp:4363
msgid "Move Z"
msgstr "Deplacer Z"

# MSG_NO_MOVE
#: Marlin_main.cpp:5541
msgid "No move."
msgstr "Pas de mouvement."

# MSG_NO_CARD
#: ultralcd.cpp:6911
msgid "No SD card"
msgstr "Pas de carte SD"

# MSG_NA
#: messages.c:107
msgid "N/A"
msgstr ""

# MSG_NO
#: messages.c:58
msgid "No"
msgstr "Non"

# MSG_SELFTEST_NOTCONNECTED
#: ultralcd.cpp:8267
msgid "Not connected"
msgstr "Non connecte"

# 
#: util.cpp:293
msgid "New firmware version available:"
msgstr "Nouvelle version de firmware disponible:"

# MSG_SELFTEST_FAN_NO c=19
#: messages.c:75
msgid "Not spinning"
msgstr "Ne tourne pas"

# MSG_WIZARD_V2_CAL c=20 r=8
#: ultralcd.cpp:4946
msgid "Now I will calibrate distance between tip of the nozzle and heatbed surface."
msgstr "Maintenant je vais calibrer la distance entre la pointe de la buse et la surface du plateau chauffant."

# MSG_WIZARD_WILL_PREHEAT c=20 r=4
#: ultralcd.cpp:5071
msgid "Now I will preheat nozzle for PLA."
msgstr "Maintenant je vais prechauffer la buse pour du PLA."

# MSG_NOZZLE
#: messages.c:59
msgid "Nozzle"
msgstr "Buse"

# MSG_DEFAULT_SETTINGS_LOADED c=20 r=5
#: Marlin_main.cpp:1518
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr "Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront regles"

# 
#: ultralcd.cpp:5062
msgid "Now remove the test print from steel sheet."
msgstr "Retirez maintenant l'impression de test de la plaque en acier."

# 
#: ultralcd.cpp:1654
msgid "Nozzle FAN"
msgstr "Vent. buse"

# MSG_PAUSE_PRINT
#: ultralcd.cpp:6875
msgid "Pause print"
msgstr "Pause de l'impr."

# MSG_PID_RUNNING c=20 r=1
#: ultralcd.cpp:1539
msgid "PID cal.           "
msgstr "Calib. PID"

# MSG_PID_FINISHED c=20 r=1
#: ultralcd.cpp:1545
msgid "PID cal. finished"
msgstr "Calib. PID terminee"

# MSG_PID_EXTRUDER c=17 r=1
#: ultralcd.cpp:5862
msgid "PID calibration"
msgstr "Calibration PID"

# MSG_PINDA_PREHEAT c=20 r=1
#: ultralcd.cpp:896
msgid "PINDA Heating"
msgstr "Chauffe de la PINDA"

# MSG_PAPER c=20 r=10
#: messages.c:60
msgid "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
msgstr "Placez une feuille de papier sous la buse pendant la calibration des 4 premiers points. Si la buse accroche le papier, eteignez vite l'imprimante."

# MSG_WIZARD_CLEAN_HEATBED c=20 r=8
#: ultralcd.cpp:5128
msgid "Please clean heatbed and then press the knob."
msgstr "Nettoyez plateau chauffant en acier et appuyez sur le bouton."

# MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
#: messages.c:21
msgid "Please clean the nozzle for calibration. Click when done."
msgstr "Nettoyez la buse pour la calibration. Cliquez une fois fait."

# MSG_SELFTEST_PLEASECHECK
#: ultralcd.cpp:8259
msgid "Please check :"
msgstr "Verifiez:"

# MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
#: messages.c:98
msgid "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
msgstr "Merci de consulter notre manuel et de corriger le probleme. Poursuivez alors l'assistant en redemarrant l'imprimante."

# MSG_CHECK_IDLER c=20 r=4
#: Marlin_main.cpp:3138
msgid "Please open idler and remove filament manually."
msgstr "Ouvrez l'idler et retirez le filament manuellement."

# MSG_PLACE_STEEL_SHEET c=20 r=4
#: messages.c:61
msgid "Please place steel sheet on heatbed."
msgstr "Placez la plaque en acier sur le plateau chauffant."

# MSG_PRESS_TO_UNLOAD c=20 r=4
#: messages.c:64
msgid "Please press the knob to unload filament"
msgstr "Appuyez sur le bouton pour decharger le filament"

# MSG_PULL_OUT_FILAMENT c=20 r=4
#: messages.c:66
msgid "Please pull out filament immediately"
msgstr "Retirez immediatement le filament"

# MSG_EJECT_REMOVE c=20 r=4
#: mmu.cpp:1422
msgid "Please remove filament and then press the knob."
msgstr "Veuillez retirer le filament puis appuyez sur le bouton."

# MSG_REMOVE_STEEL_SHEET c=20 r=4
#: messages.c:70
msgid "Please remove steel sheet from heatbed."
msgstr "Retirez la plaque en acier du plateau chauffant."

# MSG_RUN_XYZ c=20 r=4
#: Marlin_main.cpp:4583
msgid "Please run XYZ calibration first."
msgstr "Veuillez d'abord lancer la calibration XYZ."

# MSG_UPDATE_MMU2_FW c=20 r=4
#: mmu.cpp:1341
msgid "Please update firmware in your MMU2. Waiting for reset."
msgstr "Veuillez mettre a jour le firmware de votre MMU2. En attente d'un reset."

# MSG_PLEASE_WAIT c=20
#: messages.c:62
msgid "Please wait"
msgstr "Merci de patienter"

# 
#: ultralcd.cpp:5061
msgid "Please remove shipping helpers first."
msgstr "Retirez d'abord les protections de transport."

# MSG_PREHEAT_NOZZLE c=20
#: messages.c:63
msgid "Preheat the nozzle!"
msgstr "Prechauffez la buse!"

# MSG_PREHEAT
#: ultralcd.cpp:6853
msgid "Preheat"
msgstr "Prechauffage"

# MSG_WIZARD_HEATING c=20 r=3
#: messages.c:100
msgid "Preheating nozzle. Please wait."
msgstr "Prechauffage de la buse. Merci de patienter."

#  c=14
#: ultralcd.cpp:1959
msgid "PINDA"
msgstr ""

# 
#: util.cpp:297
msgid "Please upgrade."
msgstr "Mettez a jour le FW."

# MSG_PRESS_TO_PREHEAT c=20 r=4
#: Marlin_main.cpp:11526
msgid "Press knob to preheat nozzle and continue."
msgstr "Appuyez sur le bouton pour prechauffer la buse et continuer."

# MSG_FS_PAUSE c=5
#: fsensor.cpp:710
msgid "Pause"
msgstr ""

# 
#: ultralcd.cpp:1783
msgid "Power failures"
msgstr "Coup.de courant"

# MSG_PRINT_ABORTED c=20
#: messages.c:65
msgid "Print aborted"
msgstr "Impression annulee"

#  c=20
#: ultralcd.cpp:2442
msgid "Preheating to load"
msgstr "Chauffe pour charger"

#  c=20
#: ultralcd.cpp:2446
msgid "Preheating to unload"
msgstr "Chauf.pour decharger"

# MSG_SELFTEST_PRINT_FAN_SPEED c=18
#: ultralcd.cpp:8691
msgid "Print fan:"
msgstr "Vent. impr:"

# MSG_CARD_MENU
#: messages.c:20
msgid "Print from SD"
msgstr "Impr. depuis la SD"

# 
#: ultralcd.cpp:2289
msgid "Press the knob"
msgstr "App. sur sur bouton"

# MSG_PRINT_PAUSED c=20 r=1
#: ultralcd.cpp:1118
msgid "Print paused"
msgstr "Impression en pause"

# 
#: mmu.cpp:726
msgid "Press the knob to resume nozzle temperature."
msgstr "Appuyez sur le bouton pour rechauffer la buse."

# MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
#: messages.c:38
msgid "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
msgstr "L'imprimante n'a pas encore ete calibree. Suivez le manuel, chapitre Premiers pas, section Processus de calibration."

# 
#: ultralcd.cpp:1655
msgid "Print FAN"
msgstr "Vent. impr"

# 
#: ultralcd.cpp:4926
msgid "Please insert filament into the extruder, then press the knob to load it."
msgstr "Veuillez inserer le filament dans l'extrudeur, puis appuyez sur le bouton pour le charger."

# 
#: ultralcd.cpp:4921
msgid "Please insert filament into the first tube of the MMU, then press the knob to load it."
msgstr "Veuillez inserer le filament dans le premier tube du MMU, puis appuyez sur le bouton pour le charger."

# 
#: ultralcd.cpp:4843
msgid "Please load filament first."
msgstr "Veuillez d'abord charger un filament."

# MSG_PRUSA3D
#: ultralcd.cpp:2155
msgid "prusa3d.com"
msgstr ""

# MSG_BED_CORRECTION_REAR c=14 r=1
#: ultralcd.cpp:3267
msgid "Rear side [um]"
msgstr "Arriere [um]"

#  c=20 r=4
#: ultralcd.cpp:7549
msgid "Please unload the filament first, then repeat this action."
msgstr "SVP, dechargez le filament et reessayez."

# MSG_RECOVERING_PRINT c=20
#: Marlin_main.cpp:10883
msgid "Recovering print    "
msgstr "Recup. impression   "

# MSG_REMOVE_OLD_FILAMENT c=20 r=5
#: mmu.cpp:833
msgid "Remove old filament and press the knob to start loading new filament."
msgstr "Retirez l'ancien filament puis appuyez sur le bouton pour charger le nouveau."

#  c=20
#: 
msgid "Prusa i3 MK3S OK."
msgstr ""

# MSG_CALIBRATE_BED_RESET
#: ultralcd.cpp:5867
msgid "Reset XYZ calibr."
msgstr "Reinit. calib. XYZ"

# MSG_BED_CORRECTION_RESET
#: ultralcd.cpp:3268
msgid "Reset"
msgstr "Reinitialiser"

# MSG_RESUME_PRINT
#: ultralcd.cpp:6861
msgid "Resume print"
msgstr "Reprendre impression"

# MSG_RESUMING_PRINT c=20
#: messages.c:69
msgid "Resuming print"
msgstr "Reprise de l'impr."

# MSG_BED_CORRECTION_RIGHT c=14 r=1
#: ultralcd.cpp:3265
msgid "Right side[um]"
msgstr "Droite [um]"

# MSG_RPI_PORT
#: messages.c:123
msgid "RPi port"
msgstr "Port RPi"

# MSG_WIZARD_RERUN c=20 r=7
#: ultralcd.cpp:4864
msgid "Running Wizard will delete current calibration results and start from the beginning. Continue?"
msgstr "Lancement de l'Assistant supprimera les resultats actuels de calibration et commencera du debut. Continuer?"

# MSG_SD_CARD
#: messages.c:118
msgid "SD card"
msgstr "Carte SD"

# MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY
#: messages.c:119
msgid "FlashAir"
msgstr "FlshAir"

# 
#: ultralcd.cpp:2994
msgid "Right"
msgstr "Droite"

# MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
#: messages.c:35
msgid "Searching bed calibration point"
msgstr "Recherche du point de calibration du plateau chauffant"

# MSG_LANGUAGE_SELECT
#: ultralcd.cpp:5779
msgid "Select language"
msgstr "Choisir langue"

# MSG_SELFTEST_OK
#: ultralcd.cpp:7814
msgid "Self test OK"
msgstr "Auto-test OK"

# MSG_SELFTEST_START c=20
#: ultralcd.cpp:7584
msgid "Self test start  "
msgstr "Debut auto-test"

# MSG_SELFTEST
#: ultralcd.cpp:5843
msgid "Selftest         "
msgstr "Auto-test"

# MSG_SELFTEST_ERROR
#: ultralcd.cpp:8257
msgid "Selftest error !"
msgstr "Erreur auto-test!"

# MSG_SELFTEST_FAILED c=20
#: messages.c:73
msgid "Selftest failed  "
msgstr "Echec de l'auto-test"

# MSG_FORCE_SELFTEST c=20 r=8
#: Marlin_main.cpp:1550
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr "Le Selftest sera lance pour calibrer la remise a zero precise sans capteur"

# 
#: ultralcd.cpp:5102
msgid "Select nozzle preheat temperature which matches your material."
msgstr "Selectionnez la temperature de prechauffage de la buse qui correspond a votre materiau."

# MSG_SET_TEMPERATURE c=19 r=1
#: ultralcd.cpp:3286
msgid "Set temperature:"
msgstr "Regler temp.:"

#  c=20
#: 
msgid "Prusa i3 MK2.5 OK."
msgstr ""

#  c=20
#: 
msgid "Prusa i3 MK2.5S OK."
msgstr ""

#  c=20
#: 
msgid "Prusa i3 MK3 OK."
msgstr ""

# MSG_SETTINGS
#: messages.c:82
msgid "Settings"
msgstr "Reglages"

# MSG_SHOW_END_STOPS c=18
#: ultralcd.cpp:5864
msgid "Show end stops"
msgstr "Afficher butees"

# 
#: ultralcd.cpp:4008
msgid "Sensor state"
msgstr "Etat capteur"

# MSG_FILE_CNT c=20 r=6
#: cardreader.cpp:738
msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
msgstr "Certains fichiers ne seront pas tries. Max 100 fichiers tries par dossier."

# MSG_SORT
#: messages.c:120
msgid "Sort"
msgstr "Tri"

# MSG_NONE
#: messages.c:110
msgid "None"
msgstr "Aucun"

# MSG_SORT_TIME
#: messages.c:121
msgid "Time"
msgstr "Heure"

# 
#: ultralcd.cpp:3037
msgid "Severe skew:"
msgstr "Deviat.sev.:"

# MSG_SORT_ALPHA
#: messages.c:122
msgid "Alphabet"
msgstr ""

# MSG_SORTING c=20 r=1
#: cardreader.cpp:745
msgid "Sorting files"
msgstr "Tri des fichiers"

# MSG_SOUND_LOUD
#: messages.c:125
msgid "Loud"
msgstr "Fort"

# 
#: ultralcd.cpp:3036
msgid "Slight skew:"
msgstr "Deviat.leg.:"

# MSG_SOUND
#: messages.c:124
msgid "Sound"
msgstr "Son"

#  c=7
#: ultralcd.cpp:1822
msgid "Runouts"
msgstr ""

# 
#: Marlin_main.cpp:5101
msgid "Some problem encountered, Z-leveling enforced ..."
msgstr "Probleme rencontre, cliquez sur le bouton pour niveller l'axe Z..."

# MSG_SOUND_ONCE
#: messages.c:126
msgid "Once"
msgstr "Une fois"

# MSG_SPEED
#: ultralcd.cpp:7119
msgid "Speed"
msgstr "Vitesse"

# MSG_SELFTEST_FAN_YES c=19
#: messages.c:76
msgid "Spinning"
msgstr "Tourne"

# MSG_TEMP_CAL_WARNING c=20 r=4
#: Marlin_main.cpp:4596
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr "Une temperature ambiante stable de 21-26C et un support stable sont requis."

# MSG_STATISTICS
#: ultralcd.cpp:6978
msgid "Statistics  "
msgstr "Statistiques"

# MSG_STOP_PRINT
#: messages.c:91
msgid "Stop print"
msgstr "Arreter impression"

# MSG_STOPPED
#: messages.c:92
msgid "STOPPED. "
msgstr "ARRETE."

# MSG_SUPPORT
#: ultralcd.cpp:6987
msgid "Support"
msgstr ""

# MSG_SELFTEST_SWAPPED
#: ultralcd.cpp:8337
msgid "Swapped"
msgstr "Echange"

# 
#: ultralcd.cpp:4814
msgid "Select filament:"
msgstr "Selectionnez le filament:"

# MSG_TEMP_CALIBRATION c=14
#: messages.c:93
msgid "Temp. cal."
msgstr "Calib. Temp."

# 
#: ultralcd.cpp:4955
msgid "Select temperature which matches your material."
msgstr "Selectionnez la temperature qui correspond a votre materiau."

# MSG_CALIBRATION_PINDA_MENU c=17 r=1
#: ultralcd.cpp:5873
msgid "Temp. calibration"
msgstr "Calibration temp."

# MSG_TEMP_CAL_FAILED c=20 r=8
#: ultralcd.cpp:3933
msgid "Temperature calibration failed"
msgstr "Echec de la calibration en temperature"

# MSG_TEMP_CALIBRATION_DONE c=20 r=12
#: messages.c:94
msgid "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
msgstr "La calibration en temperature est terminee et activee. La calibration en temperature peut etre desactivee dans le menu Reglages-> Cal. Temp."

#  c=20 r=3
#: ultralcd.cpp:7554
msgid "Sensor verified, remove the filament now."
msgstr "Capteur verifie, retirez le filament maintenant."

# MSG_TEMPERATURE
#: ultralcd.cpp:5739
msgid "Temperature"
msgstr ""

# MSG_MENU_TEMPERATURES c=15 r=1
#: ultralcd.cpp:2218
msgid "Temperatures"
msgstr ""

# MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
#: messages.c:39
msgid "There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."
msgstr "Il faut toujours effectuer la Calibration Z. Veuillez suivre le manuel, chapitre Premiers pas, section Processus de calibration."

# 
#: ultralcd.cpp:2891
msgid "Total filament"
msgstr "Filament total"

# 
#: ultralcd.cpp:2892
msgid "Total print time"
msgstr "Temps total impr."

# MSG_TUNE
#: ultralcd.cpp:6850
msgid "Tune"
msgstr "Regler"

# 
#: 
msgid "Unload"
msgstr "Decharger"

# 
#: ultralcd.cpp:1752
msgid "Total failures"
msgstr "Total des echecs"

# 
#: ultralcd.cpp:2296
msgid "to load filament"
msgstr "pour charger le fil."

# 
#: ultralcd.cpp:2300
msgid "to unload filament"
msgstr "pour decharger fil."

# MSG_UNLOAD_FILAMENT c=17
#: messages.c:95
msgid "Unload filament"
msgstr "Decharger fil."

# MSG_UNLOADING_FILAMENT c=20 r=1
#: messages.c:96
msgid "Unloading filament"
msgstr "Dechargement fil."

# 
#: ultralcd.cpp:1705
msgid "Total"
msgstr "Totale"

# MSG_USED c=19 r=1
#: ultralcd.cpp:6001
msgid "Used during print"
msgstr "Utilise pdt impr."

# MSG_MENU_VOLTAGES c=15 r=1
#: ultralcd.cpp:2221
msgid "Voltages"
msgstr "Tensions"

# 
#: ultralcd.cpp:2194
msgid "unknown"
msgstr "inconnu"

# MSG_USERWAIT
#: Marlin_main.cpp:5511
msgid "Wait for user..."
msgstr "Attente utilisateur..."

# MSG_WAITING_TEMP c=20 r=3
#: ultralcd.cpp:3434
msgid "Waiting for nozzle and bed cooling"
msgstr "Attente du refroidissement des buse et plateau chauffant"

# MSG_WAITING_TEMP_PINDA c=20 r=3
#: ultralcd.cpp:3395
msgid "Waiting for PINDA probe cooling"
msgstr "Attente du refroidissement de la sonde PINDA"

# 
#: 
msgid "Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
msgstr "Utilisez Remonter le fil. pour retirer le filament 1 s'il depasse du tube arriere du MMU. Utilisez ejecter s'il est cache dans le tube."

# MSG_CHANGED_BOTH c=20 r=4
#: Marlin_main.cpp:1510
msgid "Warning: both printer type and motherboard type changed."
msgstr "Attention: Types d'imprimante et de carte mere modifies"

# MSG_CHANGED_MOTHERBOARD c=20 r=4
#: Marlin_main.cpp:1502
msgid "Warning: motherboard type changed."
msgstr "Attention: Type de carte mere modifie."

# MSG_CHANGED_PRINTER c=20 r=4
#: Marlin_main.cpp:1506
msgid "Warning: printer type changed."
msgstr "Attention: Type d'imprimante modifie"

# MSG_UNLOAD_SUCCESSFUL c=20 r=2
#: Marlin_main.cpp:3128
msgid "Was filament unload successful?"
msgstr "Dechargement du filament reussi?"

# MSG_SELFTEST_WIRINGERROR
#: messages.c:81
msgid "Wiring error"
msgstr "Erreur de cablage"

# MSG_WIZARD c=17 r=1
#: ultralcd.cpp:5834
msgid "Wizard"
msgstr "Assistant"

# MSG_XYZ_DETAILS c=18
#: ultralcd.cpp:2210
msgid "XYZ cal. details"
msgstr "Details calib. XYZ"

# MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
#: messages.c:18
msgid "XYZ calibration failed. Please consult the manual."
msgstr "Echec calibration XYZ. Consultez le manuel."

# MSG_YES
#: messages.c:102
msgid "Yes"
msgstr "Oui"

# MSG_WIZARD_QUIT c=20 r=8
#: messages.c:101
msgid "You can always resume the Wizard from Calibration -> Wizard."
msgstr "Vous pouvez toujours relancer l'Assistant dans Calibration > Assistant."

# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
#: ultralcd.cpp:3904
msgid "XYZ calibration all right. Skew will be corrected automatically."
msgstr "Calibration XYZ OK. L'ecart sera corrige automatiquement."

# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
#: ultralcd.cpp:3901
msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
msgstr "Calibration XYZ OK. Les axes X/Y sont legerement non perpendiculaires. Bon boulot!"

# MSG_TIMEOUT c=12
#: messages.c:137
msgid "Timeout"
msgstr ""

# MSG_X_CORRECTION c=13
#: ultralcd.cpp:5190
msgid "X-correct:"
msgstr "Correct-X:"

# MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
#: ultralcd.cpp:3898
msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
msgstr "Calibration XYZ OK. Les axes X/Y sont perpendiculaires. Felicitations!"

# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
#: ultralcd.cpp:3882
msgid "XYZ calibration compromised. Front calibration points not reachable."
msgstr "Calibration XYZ compromise. Les points de calibration en avant ne sont pas atteignables."

# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
#: ultralcd.cpp:3885
msgid "XYZ calibration compromised. Right front calibration point not reachable."
msgstr "Calibration XYZ compromise. Le point de calibration avant droit n'est pas atteignable."

# MSG_LOAD_ALL c=17
#: ultralcd.cpp:6261
msgid "Load all"
msgstr "Charger un par un"

# 
#: ultralcd.cpp:3864
msgid "XYZ calibration failed. Bed calibration point was not found."
msgstr "Echec calibration XYZ. Le point de calibration du plateau n'a pas ete trouve."

# 
#: ultralcd.cpp:3870
msgid "XYZ calibration failed. Front calibration points not reachable."
msgstr "Echec calibration XYZ. Les points de calibration en avant ne sont pas atteignables."

# 
#: ultralcd.cpp:3873
msgid "XYZ calibration failed. Right front calibration point not reachable."
msgstr "Echec calibration XYZ. Le point de calibration avant droit n'est pas atteignable."

# 
#: ultralcd.cpp:2991
msgid "Y distance from min"
msgstr "Distance Y du min"

# 
#: ultralcd.cpp:4958
msgid "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
msgstr "L'imprimante commencera a  imprimer une ligne en zig-zag. Tournez le bouton jusqu'a atteindre la hauteur optimale. Consultez les photos dans le manuel (chapitre Calibration)."

#  c=20 r=5
#: ultralcd.cpp:7558
msgid "Verification failed, remove the filament and try again."
msgstr "Verification en echec, retirez le filament et reessayez."

# MSG_Y_CORRECTION c=13
#: ultralcd.cpp:5191
msgid "Y-correct:"
msgstr "Correct-Y:"

# MSG_OFF
#: messages.c:105
msgid "Off"
msgstr ""

# MSG_ON
#: messages.c:106
msgid "On"
msgstr ""

# 
#: messages.c:53
msgid "Back"
msgstr "Retour"

# 
#: ultralcd.cpp:5724
msgid "Checks"
msgstr "Verifications"

# 
#: ultralcd.cpp:8351
msgid "False triggering"
msgstr "Faux declenchement"

# 
#: ultralcd.cpp:4013
msgid "FINDA:"
msgstr "FINDA:"

# MSG_FIRMWARE
#: language.h:23
msgid "Firmware"
msgstr ""

# MSG_STRICT
#: messages.c:112
msgid "Strict"
msgstr "Stricte"

# MSG_WARN
#: messages.c:111
msgid "Warn"
msgstr "Avert"

# 
#: messages.c:83
msgid "HW Setup"
msgstr "Config HW"

# 
#: ultralcd.cpp:4017
msgid "IR:"
msgstr "IR:"

# MSG_MAGNETS_COMP
#: messages.c:130
msgid "Magnets comp."
msgstr "Compens. aim."

# MSG_MESH
#: messages.c:128
msgid "Mesh"
msgstr ""

# 
#: ultralcd.cpp:5763
msgid "Mesh bed leveling"
msgstr ""

# 
#: Marlin_main.cpp:872
msgid "MK3S firmware detected on MK3 printer"
msgstr "Firmware MK3S detecte sur imprimante MK3"

# MSG_MMU_MODE
#: messages.c:117
msgid "MMU Mode"
msgstr "Mode MMU"

# 
#: ultralcd.cpp:4494
msgid "Mode change in progress ..."
msgstr "Changement de mode en cours..."

# MSG_MODEL
#: messages.c:113
msgid "Model"
msgstr "Modele"

# MSG_NOZZLE_DIAMETER
#: messages.c:116
msgid "Nozzle d."
msgstr "Diam. buse"

# 
#: util.cpp:514
msgid "G-code sliced for a different level. Continue?"
msgstr "Le G-code a ete prepare pour un niveau different. Continuer?"

# 
#: util.cpp:520
msgid "G-code sliced for a different level. Please re-slice the model again. Print cancelled."
msgstr "Le G-code a ete prepare pour un niveau different. Veuillez decouper le modele a nouveau. L'impression a ete annulee."

# 
#: util.cpp:431
msgid "G-code sliced for a different printer type. Continue?"
msgstr "Le G-code a ete prepare pour une autre version de l'imprimante. Continuer?"

# 
#: util.cpp:437
msgid "G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
msgstr "Le G-code a ete prepare pour une autre version de l'imprimante. Veuillez decouper le modele a nouveau. L'impression a ete annulee."

# 
#: util.cpp:481
msgid "G-code sliced for a newer firmware. Continue?"
msgstr "Le G-code a ete prepare pour une version plus recente du firmware. Continuer?"

# 
#: util.cpp:487
msgid "G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
msgstr "Le G-code a ete prepare pour une version plus recente du firmware. Veuillez mettre a jour le firmware. L'impression annulee."

# 
#: ultralcd.cpp:4009
msgid "PINDA:"
msgstr "PINDA:"

#  c=20
#: ultralcd.cpp:2452
msgid "Preheating to cut"
msgstr "Chauffe pour couper"

#  c=20
#: ultralcd.cpp:2449
msgid "Preheating to eject"
msgstr "Chauf. pour remonter"

# 
#: util.cpp:394
msgid "Printer nozzle diameter differs from the G-code. Continue?"
msgstr "Diametre de la buse dans les reglages ne correspond pas a celui dans le G-Code. Continuer?"

# 
#: util.cpp:401
msgid "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
msgstr "Diametre de la buse dans les reglages ne correspond pas a celui dans le G-Code. Merci de verifier le parametre dans les reglages. Impression annulee."

#  c=20
#: ultralcd.cpp:8357
msgid "%s level expected"
msgstr ""

# 
#: ultralcd.cpp:6814
msgid "Rename"
msgstr "Renommer"

# 
#: ultralcd.cpp:6807
msgid "Select"
msgstr "Selectionner"

# 
#: ultralcd.cpp:2212
msgid "Sensor info"
msgstr "Info capteur"

# MSG_SHEET c=10
#: messages.c:54
msgid "Sheet"
msgstr "Plaque"

# MSG_SOUND_BLIND
#: messages.c:127
msgid "Assist"
msgstr ""

#  c=18
#: ultralcd.cpp:5722
msgid "Steel sheets"
msgstr "Plaques en acier"

# MSG_Z_CORRECTION c=13
#: ultralcd.cpp:5192
msgid "Z-correct:"
msgstr "Correct-Z:"

# MSG_Z_PROBE_NR
#: messages.c:129
msgid "Z-probe nr."
msgstr "Mesurer x-fois"