# Translation of Prusa-Firmware into Spanish.
#
msgid ""
msgstr ""
"Project-Id-Version: Prusa-Firmware\n"
"POT-Creation-Date: Wed 16 Mar 2022 09:24:45 AM CET\n"
"PO-Revision-Date: Wed 16 Mar 2022 09:24:45 AM CET\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: es\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.0.7\n"
"X-Poedit-SourceCharset: UTF-8\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"

#. MSG_IR_03_OR_OLDER c=18
#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
msgid " 0.3 or older"
msgstr " 0.3 o mayor"

#. MSG_IR_04_OR_NEWER c=18
#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
msgid " 0.4 or newer"
msgstr " 0.4 o mas nueva"

#. MSG_SELFTEST_FS_LEVEL c=20
#: ../../Firmware/ultralcd.cpp:7044
msgid "%s level expected"
msgstr "%s nivel esperado"

#. MSG_CANCEL c=10
#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
#: ../../Firmware/ultralcd.cpp:3843
msgid ">Cancel"
msgstr ">Cancelar"

#. MSG_BABYSTEPPING_Z c=15
#. Beware: must include the ':' as its last character
#: ../../Firmware/ultralcd.cpp:2678
msgid "Adjusting Z:"
msgstr "Ajustar-Z:"

#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
#: ../../Firmware/ultralcd.cpp:7321
msgid "All correct"
msgstr "Todo bien"

#. MSG_WIZARD_DONE c=20 r=3
#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
#: ../../Firmware/ultralcd.cpp:4188
msgid "All is done. Happy printing!"
msgstr "Terminado! Feliz impresion!"

#. MSG_SORT_ALPHA c=8
#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
msgid "Alphabet"
msgstr "Alfabet"

#. MSG_ALWAYS c=6
#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
msgid "Always"
msgstr ""

#. MSG_AMBIENT c=14
#: ../../Firmware/ultralcd.cpp:1413
msgid "Ambient"
msgstr "Ambiente"

#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
#: ../../Firmware/ultralcd.cpp:2991
msgid "Are left and right Z~carriages all up?"
msgstr "Carros Z izq./der. estan arriba maximo?"

#. MSG_SOUND_BLIND c=7
#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
msgid "Assist"
msgstr "Asist."

#. MSG_AUTO c=6
#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
msgid "Auto"
msgstr ""

#. MSG_AUTO_HOME c=18
#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
#: ../../Firmware/ultralcd.cpp:4908
msgid "Auto home"
msgstr "Llevar al origen"

#. MSG_AUTO_POWER c=10
#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
#: ../../Firmware/ultralcd.cpp:5787
msgid "Auto power"
msgstr "Encendido"

#. MSG_AUTOLOAD_FILAMENT c=18
#: ../../Firmware/ultralcd.cpp:5580
msgid "AutoLoad filament"
msgstr "Carga auto. filam."

#. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
#: ../../Firmware/ultralcd.cpp:3557
msgid ""
"Autoloading filament available only when filament sensor is turned on..."
msgstr ""
"La carga automatica solo funciona si el sensor de filamento esta activado..."

#. MSG_AUTOLOADING_ENABLED c=20 r=4
#: ../../Firmware/ultralcd.cpp:2309
msgid ""
"Autoloading filament is active, just press the knob and insert filament..."
msgstr ""
"La carga automatica esta activada, pulse el dial e inserte el filamento..."

#. MSG_SELFTEST_AXIS c=16
#: ../../Firmware/ultralcd.cpp:7023
msgid "Axis"
msgstr "Eje"

#. MSG_SELFTEST_AXIS_LENGTH c=20
#: ../../Firmware/ultralcd.cpp:7022
msgid "Axis length"
msgstr "Longitud del eje"

#. MSG_BACK c=18
#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
#: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
msgid "Back"
msgstr "atras"

#. MSG_BED c=13
#: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
#: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
#: ../../Firmware/ultralcd.cpp:5899
msgid "Bed"
msgstr "Base"

#. MSG_BED_HEATING c=20
#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
#: ../../Firmware/ultralcd.cpp:578
msgid "Bed Heating"
msgstr "Calentando Base"

#. MSG_BED_DONE c=20
#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
#: ../../Firmware/ultralcd.cpp:581
msgid "Bed done"
msgstr "Base preparada"

#. MSG_BED_CORRECTION_MENU c=18
#: ../../Firmware/ultralcd.cpp:4920
msgid "Bed level correct"
msgstr "Corr. de la cama"

#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
#: ../../Firmware/Marlin_main.cpp:2211 ../../Firmware/Marlin_main.cpp:2990
#: ../../Firmware/Marlin_main.cpp:3000
#: ../../Firmware/mesh_bed_calibration.cpp:2862
#: ../../Firmware/mesh_bed_calibration.cpp:2870
#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
msgid ""
"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
"reset."
msgstr ""
"Nivelacion fallada. Sensor no funciona. Restos en boquilla? Esperando reset."

#. MSG_SELFTEST_BEDHEATER c=20
#: ../../Firmware/ultralcd.cpp:6980
msgid "Bed/Heater"
msgstr "Base/Calentador"

#. MSG_BELT_STATUS c=18
#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
#: ../../Firmware/ultralcd.cpp:1734
msgid "Belt status"
msgstr "Estado de correa"

#. MSG_BELTTEST c=18
#: ../../Firmware/ultralcd.cpp:4910
msgid "Belt test"
msgstr "Test cinturon"

#. MSG_RECOVER_PRINT c=20 r=2
#: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
#: ../../Firmware/messages.cpp:77
msgid "Blackout occurred. Recover print?"
msgstr "Se fue la luz. Re- anudar la impresion?"

#. MSG_BRIGHT c=6
#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
msgid "Bright"
msgstr "Brill."

#. MSG_BRIGHTNESS c=18
#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
#: ../../Firmware/ultralcd.cpp:5797
msgid "Brightness"
msgstr "Brillo"

#. MSG_CALIBRATE_BED c=18
#: ../../Firmware/ultralcd.cpp:4914
msgid "Calibrate XYZ"
msgstr "Calibrar XYZ"

#. MSG_HOMEYZ c=18
#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
msgid "Calibrate Z"
msgstr "Calibrar Z"

#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
#: ../../Firmware/ultralcd.cpp:2954
msgid ""
"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"Calibrando XYZ. Gira el dial para subir el extrusor hasta tocar los topes "
"superiores. Despues haz clic."

#. MSG_CALIBRATE_Z_AUTO c=20 r=2
#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
#: ../../Firmware/ultralcd.cpp:626
msgid "Calibrating Z"
msgstr "Calibrando Z"

#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
#: ../../Firmware/ultralcd.cpp:2953
msgid ""
"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"Calibrando Z. Gira el dial para subir el extrusor hasta tocar los topes "
"superiores. Despues haz clic."

#. MSG_CALIBRATING_HOME c=20
#: ../../Firmware/ultralcd.cpp:7323
msgid "Calibrating home"
msgstr "Calibrar pos.inicial"

#. MSG_CALIBRATION c=18
#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
msgid "Calibration"
msgstr "Calibracion"

#. MSG_HOMEYZ_DONE c=20
#: ../../Firmware/ultralcd.cpp:638
msgid "Calibration done"
msgstr "Calibracion OK"

#. MSG_SD_REMOVED c=20
#: ../../Firmware/ultralcd.cpp:7723
msgid "Card removed"
msgstr "Tarjeta retirada"

#. MSG_CNG_SDCARD
#: ../../Firmware/ultralcd.cpp:5546
msgid "Change SD card"
msgstr ""

#. MSG_FILAMENTCHANGE c=18
#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
#: ../../Firmware/ultralcd.cpp:5738
msgid "Change filament"
msgstr "Cambiar filamento"

#. MSG_CHANGE_SUCCESS c=20
#: ../../Firmware/ultralcd.cpp:2171
msgid "Change success!"
msgstr "Cambio correcto!"

#. MSG_CORRECTLY c=20
#: ../../Firmware/ultralcd.cpp:2223
msgid "Changed correctly?"
msgstr "Cambio correcto?"

#. MSG_CHECKING_X c=20
#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
#: ../../Firmware/ultralcd.cpp:7313
msgid "Checking X axis"
msgstr "Control sensor X"

#. MSG_CHECKING_Y c=20
#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
#: ../../Firmware/ultralcd.cpp:7314
msgid "Checking Y axis"
msgstr "Control sensor Y"

#. MSG_SELFTEST_CHECK_Z c=20
#: ../../Firmware/ultralcd.cpp:7315
msgid "Checking Z axis"
msgstr "Control sensor Z"

#. MSG_SELFTEST_CHECK_BED c=20
#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
msgid "Checking bed"
msgstr "Control base cal."

#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
#: ../../Firmware/ultralcd.cpp:7312
msgid "Checking endstops"
msgstr "Control endstops"

#. MSG_CHECKING_FILE c=17
#: ../../Firmware/ultralcd.cpp:7411
msgid "Checking file"
msgstr "Verif. archivo"

#. MSG_SELFTEST_CHECK_HOTEND c=20
#: ../../Firmware/ultralcd.cpp:7318
msgid "Checking hotend"
msgstr "Control fusor"

#. MSG_SELFTEST_CHECK_FSENSOR c=20
#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
#: ../../Firmware/ultralcd.cpp:7320
msgid "Checking sensors"
msgstr "Comprobando sensores"

#. MSG_CHECKS c=18
#: ../../Firmware/ultralcd.cpp:4773
msgid "Checks"
msgstr "Comprobaciones"

#. MSG_NOT_COLOR c=19
#: ../../Firmware/ultralcd.cpp:2226
msgid "Color not correct"
msgstr "Color no homogeneo"

#. MSG_COMMUNITY_MADE c=18
#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
msgid "Community made"
msgstr "Desde la comunidad"

#. MSG_CONTINUE_SHORT c=5
#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
msgid "Cont."
msgstr ""

#. MSG_COOLDOWN c=18
#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
msgid "Cooldown"
msgstr "Enfriar"

#. MSG_COPY_SEL_LANG c=20 r=3
#: ../../Firmware/ultralcd.cpp:3671
msgid "Copy selected language?"
msgstr "Copiar idioma seleccionado?"

#. MSG_CRASH c=7
#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
#: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
msgid "Crash"
msgstr "Choque"

#. MSG_CRASHDETECT c=13
#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
#: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
#: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
#: ../../Firmware/ultralcd.cpp:5779
msgid "Crash det."
msgstr "Det. choque"

#. MSG_CRASH_DETECTED c=20
#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
msgid "Crash detected."
msgstr "Choque detectado."

#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:3529
msgid ""
"Crash detection can\n"
"be turned on only in\n"
"Normal mode"
msgstr ""
"Dec. choque puede\n"
"ser activada solo en\n"
"Modo normal"

#. MSG_CUT_FILAMENT c=17
#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
#: ../../Firmware/ultralcd.cpp:5575
msgid "Cut filament"
msgstr "Cortar filament"

#. MSG_CUTTER c=9
#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
#: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
msgid "Cutter"
msgstr "Cuchillo"

#. MSG_MMU_CUTTING_FIL c=18
#: ../../Firmware/mmu.cpp:1048
msgid "Cutting filament"
msgstr "Corte de filament"

#. MSG_DATE c=17
#: ../../Firmware/ultralcd.cpp:1676
msgid "Date:"
msgstr "Fecha:"

#. MSG_DIM c=6
#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
msgid "Dim"
msgstr "Oscuro"

#. MSG_DISABLE_STEPPERS c=18
#: ../../Firmware/ultralcd.cpp:4810
msgid "Disable steppers"
msgstr "Apagar motores"

#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
#: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
#: ../../Firmware/messages.cpp:11
msgid ""
"Distance between tip of the nozzle and the bed surface has not been set yet. "
"Please follow the manual, chapter First steps, section First layer "
"calibration."
msgstr ""
"Distancia entre la punta del boquilla y la superficie de la base aun no "
"fijada. Por favor siga el manual, capitulo Primeros Pasos, Calibracion "
"primera capa."

#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
#: ../../Firmware/ultralcd.cpp:4153
msgid ""
"Do you want to repeat last step to readjust distance between nozzle and "
"heatbed?"
msgstr ""
"Quieres repetir el ultimo paso para reajustar la distancia boquilla-base?"

#. MSG_EXTRUDER_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:4222
msgid "E-correct:"
msgstr "Corregir-E:"

#. MSG_ERROR c=10
#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
msgid "ERROR:"
msgstr ""

#. MSG_FSENS_NOT_RESPONDING c=20 r=4
#: ../../Firmware/ultralcd.cpp:3570
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr ""
"ERROR:Sensor de fi- lamento no responde Por favor, comprue- ba la conexion."

#. MSG_EJECT_FILAMENT c=17
#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
#: ../../Firmware/ultralcd.cpp:5573
msgid "Eject filament"
msgstr "Expulsar fil."

#. MSG_EJECTING_FILAMENT c=20
#: ../../Firmware/mmu.cpp:1076
msgid "Ejecting filament"
msgstr "Expulsando filamento"

#. MSG_SELFTEST_ENDSTOP c=16
#: ../../Firmware/ultralcd.cpp:6993
msgid "Endstop"
msgstr ""

#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
#: ../../Firmware/ultralcd.cpp:6998
msgid "Endstop not hit"
msgstr "Endstop no alcanzado"

#. MSG_SELFTEST_ENDSTOPS c=20
#: ../../Firmware/ultralcd.cpp:6984
msgid "Endstops"
msgstr ""

#. MSG_EXTRUDER c=17
#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
#: ../../Firmware/ultralcd.cpp:3503
msgid "Extruder"
msgstr "Extruir"

#. MSG_EXTRUDER_FAN_SPEED c=16
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
#: ../../Firmware/ultralcd.cpp:7329
msgid "Extruder fan:"
msgstr "Vent.extrusor:"

#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:1730
msgid "Extruder info"
msgstr "Info. del extrusor"

#. MSG_FSENSOR_AUTOLOAD c=13
#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
#: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
#: ../../Firmware/ultralcd.cpp:4258
msgid "F. autoload"
msgstr "Autocarg.fil."

#. MSG_FS_ACTION c=10
#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
#: ../../Firmware/ultralcd.cpp:4715
msgid "FS Action"
msgstr "FS accion"

#. MSG_FS_V_03_OR_OLDER c=18
#: ../../Firmware/Marlin_main.cpp:9482
msgid "FS v0.3 or older"
msgstr "FS 0.3 o mayor"

#. MSG_FS_V_04_OR_NEWER c=18
#: ../../Firmware/Marlin_main.cpp:9474
msgid "FS v0.4 or newer"
msgstr "FS 0.4 o mas nueva"

#. MSG_FAIL_STATS c=18
#: ../../Firmware/ultralcd.cpp:5597
msgid "Fail stats"
msgstr "Estadistica Fallos"

#. MSG_MMU_FAIL_STATS c=18
#: ../../Firmware/ultralcd.cpp:5600
msgid "Fail stats MMU"
msgstr "Total Fallos MMU"

#. MSG_FALSE_TRIGGERING c=20
#: ../../Firmware/ultralcd.cpp:7039
msgid "False triggering"
msgstr "Falsa activacion"

#. MSG_FAN_SPEED c=14
#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
#: ../../Firmware/ultralcd.cpp:5901
msgid "Fan speed"
msgstr "Velocidad Vent"

#. MSG_SELFTEST_FAN c=20
#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
#: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
#: ../../Firmware/ultralcd.cpp:7311
msgid "Fan test"
msgstr "Test ventiladores"

#. MSG_FANS_CHECK c=13
#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
#: ../../Firmware/ultralcd.cpp:5764
msgid "Fans check"
msgstr "Comprob.vent"

#. MSG_FIL_RUNOUTS c=15
#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
#: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
#: ../../Firmware/ultralcd.cpp:1337
msgid "Fil. runouts"
msgstr "Fil. acabado"

#. MSG_FSENSOR c=12
#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
#: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
#: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
msgid "Fil. sensor"
msgstr "Sensor Fil."

#. MSG_FILAMENT c=17
#: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
msgid "Filament"
msgstr "Filamento"

#. MSG_FILAMENT_CLEAN c=20 r=2
#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
#: ../../Firmware/ultralcd.cpp:2301
msgid "Filament extruding & with correct color?"
msgstr "Es nitido el color nuevo?"

#. MSG_NOT_LOADED c=19
#: ../../Firmware/ultralcd.cpp:2225
msgid "Filament not loaded"
msgstr "Fil. no introducido"

#. MSG_SELFTEST_FILAMENT_SENSOR c=17
#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
#: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
#: ../../Firmware/ultralcd.cpp:7338
msgid "Filament sensor"
msgstr "Sensor de fil."

#. MSG_FILAMENT_USED c=19
#: ../../Firmware/ultralcd.cpp:2373
msgid "Filament used"
msgstr "Filamento usado"

#. MSG_FILE_INCOMPLETE c=20 r=3
#: ../../Firmware/ultralcd.cpp:7470
msgid "File incomplete. Continue anyway?"
msgstr "Archivo incompleto. Continuar de todos modos?"

#. MSG_FINISHING_MOVEMENTS c=20
#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
#: ../../Firmware/ultralcd.cpp:5638
msgid "Finishing movements"
msgstr "Term. movimientos"

#. MSG_V2_CALIBRATION c=18
#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
#: ../../Firmware/ultralcd.cpp:5432
msgid "First layer cal."
msgstr "Cal. primera cap."

#. MSG_WIZARD_SELFTEST c=20 r=8
#: ../../Firmware/ultralcd.cpp:4074
msgid "First, I will run the selftest to check most common assembly problems."
msgstr ""
"Primero, hare el Selftest para comprobar los problemas de montaje mas "
"comunes."

#. MSG_MMU_FIX_ISSUE c=20 r=4
#: ../../Firmware/mmu.cpp:728
msgid "Fix the issue and then press button on MMU unit."
msgstr "Corrige el problema y pulsa el boton en la unidad MMU."

#. MSG_FLOW c=15
#: ../../Firmware/ultralcd.cpp:5732
msgid "Flow"
msgstr "Flujo"

#. MSG_SELFTEST_PART_FAN c=20
#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
#: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
msgid "Front print fan?"
msgstr "Vent. frontal?"

#. MSG_BED_CORRECTION_FRONT c=14
#: ../../Firmware/ultralcd.cpp:2762
msgid "Front side[μm]"
msgstr "Frontal [μm]"

#. MSG_SELFTEST_FANS c=20
#: ../../Firmware/ultralcd.cpp:7028
msgid "Front/left fans"
msgstr "Vents. front/izqui"

#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
#: ../../Firmware/util.cpp:418
msgid "G-code sliced for a different level. Continue?"
msgstr "Codigo G laminado para un nivel diferente. Continuar?"

#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
#: ../../Firmware/util.cpp:424
msgid ""
"G-code sliced for a different level. Please re-slice the model again. Print "
"cancelled."
msgstr ""
"Codigo G laminado para un nivel diferente. Por favor relamina el modelo de "
"nuevo. Impresion cancelada."

#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
#: ../../Firmware/util.cpp:471
msgid "G-code sliced for a different printer type. Continue?"
msgstr "Codigo G laminado para un tipo de impresora diferente. Continuar?"

#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
#: ../../Firmware/util.cpp:477
msgid ""
"G-code sliced for a different printer type. Please re-slice the model again. "
"Print cancelled."
msgstr ""
"Codigo G laminado para una impresora diferente. Por favor relamina el modelo "
"de nuevo. Impresion cancelada."

#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
#: ../../Firmware/util.cpp:385
msgid "G-code sliced for a newer firmware. Continue?"
msgstr "Codigo G laminado para nuevo firmware. Continuar?"

#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
#: ../../Firmware/util.cpp:391
msgid ""
"G-code sliced for a newer firmware. Please update the firmware. Print "
"cancelled."
msgstr ""
"Codigo G laminado para nuevo firmware. Por favor actualiza el firmware. "
"Impresion cancelada."

#. MSG_GCODE c=8
#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
#: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
#: ../../Firmware/ultralcd.cpp:4672
msgid "Gcode"
msgstr ""

#. MSG_HW_SETUP c=18
#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
#: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
msgid "HW Setup"
msgstr "Configuracion HW"

#. MSG_SELFTEST_HEATERTHERMISTOR c=20
#: ../../Firmware/ultralcd.cpp:6976
msgid "Heater/Thermistor"
msgstr "Calentador/Termistor"

#. MSG_HEATING c=20
#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
#: ../../Firmware/ultralcd.cpp:570
msgid "Heating"
msgstr "Calentando..."

#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:9395
msgid "Heating disabled by safety timer."
msgstr "Calentadores desactivados por el temporizador de seguridad."

#. MSG_HEATING_COMPLETE c=20
#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
#: ../../Firmware/ultralcd.cpp:573
msgid "Heating done."
msgstr "Calentando acabado."

#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
msgid ""
"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
"setup process, in which the Z-axis will be calibrated. Then, you will be "
"ready to print."
msgstr ""
"Hola, soy tu impresora Original Prusa i3. Te guiare a traves de un breve "
"proceso de configuracion, en el que se calibrara el eje Z. Despues, estaras "
"listo para imprimir."

#. MSG_WIZARD_WELCOME c=20 r=7
#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
msgid ""
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
"through the setup process?"
msgstr ""
"Hola, soy tu impresora Original Prusa i3. Quieres que te guie a traves de la "
"configuracion?"

#. MSG_HIGH_POWER c=10
#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
#: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
#: ../../Firmware/ultralcd.cpp:5788
msgid "High power"
msgstr "Rend.pleno"

#. MSG_WIZARD_XYZ_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4083
msgid "I will run xyz calibration now. It will take approx. 12 mins."
msgstr "Hare la calibracion XYZ. Tardara 12 min. aproximadamente."

#. MSG_WIZARD_Z_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4091
msgid "I will run z calibration now."
msgstr "Voy a hacer Calibracion Z ahora."

#. MSG_ADDITIONAL_SHEETS c=20 r=9
#: ../../Firmware/ultralcd.cpp:4161
msgid ""
"If you have additional steel sheets, calibrate their presets in Settings - "
"HW Setup - Steel sheets."
msgstr ""
"Si tienes planchas de acero adicionales, calibra sus ajustes en Ajustes - "
"Ajustes HW - Planchas acero."

#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
#: ../../Firmware/mesh_bed_calibration.cpp:2531
msgid "Improving bed calibration point"
msgstr ""

#. MSG_INFO_SCREEN c=18
#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
msgid "Info screen"
msgstr "Monitorizar"

#. MSG_INIT_SDCARD c=18
#: ../../Firmware/ultralcd.cpp:5553
msgid "Init. SD card"
msgstr ""

#. MSG_INSERT_FILAMENT c=20
#: ../../Firmware/ultralcd.cpp:2160
msgid "Insert filament"
msgstr "Introducir filamento"

#. MSG_INSERT_FIL c=20 r=6
#: ../../Firmware/ultralcd.cpp:6231
msgid ""
"Insert the filament (do not load it) into the extruder and then press the "
"knob."
msgstr ""
"Inserte el filamento (no lo cargue) en el extrusor y luego presione el dial."

#. MSG_FILAMENT_LOADED c=20 r=2
#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
#: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
msgid "Is filament loaded?"
msgstr "Esta el filamento cargado?"

#. MSG_STEEL_SHEET_CHECK c=20 r=2
#: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
msgid "Is steel sheet on heatbed?"
msgstr "Esta coloc.la lamina sobre la base?"

#. MSG_ITERATION c=12
#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
msgid "Iteration"
msgstr "Iteracion"

#. MSG_LAST_PRINT c=18
#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
#: ../../Firmware/ultralcd.cpp:1304
msgid "Last print"
msgstr "Ultima impresion"

#. MSG_LAST_PRINT_FAILURES c=20
#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
#: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
#: ../../Firmware/ultralcd.cpp:1334
msgid "Last print failures"
msgstr "Ultimos imp. fallos"

#. MSG_LEFT c=10
#: ../../Firmware/ultralcd.cpp:2504
msgid "Left"
msgstr "Izquierda"

#. MSG_SELFTEST_EXTRUDER_FAN c=20
#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
#: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
msgid "Left hotend fan?"
msgstr "Vent. izquierdo?"

#. MSG_BED_CORRECTION_LEFT c=14
#: ../../Firmware/ultralcd.cpp:2760
msgid "Left side [μm]"
msgstr "Izquierda [μm]"

#. MSG_BL_HIGH c=12
#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
msgid "Level Bright"
msgstr "Valor brill."

#. MSG_BL_LOW c=12
#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
msgid "Level Dimmed"
msgstr "Valor oscuro"

#. MSG_LIN_CORRECTION c=18
#: ../../Firmware/ultralcd.cpp:4834
msgid "Lin. correction"
msgstr "Correc. Linealidad"

#. MSG_BABYSTEP_Z c=18
#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
#: ../../Firmware/ultralcd.cpp:5501
msgid "Live adjust Z"
msgstr "Micropaso Eje Z"

#. MSG_LOAD_ALL c=18
#: ../../Firmware/ultralcd.cpp:5128
msgid "Load all"
msgstr "Intr. todos fil."

#. MSG_LOAD_FILAMENT c=17
#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
#: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
#: ../../Firmware/ultralcd.cpp:5584
msgid "Load filament"
msgstr "Introducir filam."

#. MSG_LOAD_TO_NOZZLE c=18
#: ../../Firmware/ultralcd.cpp:5571
msgid "Load to nozzle"
msgstr "Cargar a boquilla"

#. MSG_LOADING_COLOR c=20
#: ../../Firmware/ultralcd.cpp:2193
msgid "Loading color"
msgstr "Cambiando color"

#. MSG_LOADING_FILAMENT c=20
#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
#: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
#: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
#: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
msgid "Loading filament"
msgstr "Introduciendo filam."

#. MSG_LOOSE_PULLEY c=20
#: ../../Firmware/ultralcd.cpp:7016
msgid "Loose pulley"
msgstr "Polea suelta"

#. MSG_SOUND_LOUD c=7
#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
#: ../../Firmware/ultralcd.cpp:4470
msgid "Loud"
msgstr "Alto"

#. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
#: ../../Firmware/Marlin_main.cpp:880
msgid "MK3 firmware detected on MK3S printer"
msgstr "Firmware MK3 detectado en impresora MK3S"

#. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
#: ../../Firmware/Marlin_main.cpp:873
msgid "MK3S firmware detected on MK3 printer"
msgstr "Firmware MK3S detectado en impresora MK3"

#. MSG_MMU_MODE c=8
#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
#: ../../Firmware/ultralcd.cpp:4390
msgid "MMU Mode"
msgstr "Modo MMU"

#. MSG_MMU_OK_RESUMING_POSITION c=20 r=4
#: ../../Firmware/mmu.cpp:763
msgid "MMU OK. Resuming position..."
msgstr "MMU OK. Restaurando posicion..."

#. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
#: ../../Firmware/mmu.cpp:756
msgid "MMU OK. Resuming temperature..."
msgstr "MMU OK. Restaurando temperatura..."

#. MSG_MMU_OK_RESUMING c=20 r=4
#: ../../Firmware/mmu.cpp:774
msgid "MMU OK. Resuming..."
msgstr "MMU OK. Resumiendo..."

#. MSG_MMU_FAILS c=15
#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
#: ../../Firmware/ultralcd.cpp:1201
msgid "MMU fails"
msgstr "Fallos MMU"

#. MSG_MMU_LOAD_FAILED c=20
#: ../../Firmware/mmu.cpp:1248
msgid "MMU load failed"
msgstr "Carga MMU fallida"

#. MSG_MMU_LOAD_FAILS c=15
#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
#: ../../Firmware/ultralcd.cpp:1202
msgid "MMU load fails"
msgstr "Carga MMU falla"

#. MSG_MMU_USER_ATTENTION c=20 r=3
#: ../../Firmware/mmu.cpp:723
msgid "MMU needs user attention."
msgstr "MMU necesita atencion del usuario."

#. MSG_MMU_POWER_FAILS c=15
#: ../../Firmware/ultralcd.cpp:1203
msgid "MMU power fails"
msgstr "Fallo red MMU"

#. MSG_MMU_CONNECTED c=18
#: ../../Firmware/ultralcd.cpp:1688
msgid "MMU2 connected"
msgstr "MMU2 conectado"

#. MSG_MAGNETS_COMP c=13
#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
msgid "Magnets comp."
msgstr "Comp. imanes"

#. MSG_MAIN c=18
#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
#: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
#: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
#: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
#: ../../Firmware/ultralcd.cpp:5139 ../../Firmware/ultralcd.cpp:5162
#: ../../Firmware/ultralcd.cpp:5181 ../../Firmware/ultralcd.cpp:5725
msgid "Main"
msgstr "Menu principal"

#. MSG_MEASURED_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2545
msgid "Measured skew"
msgstr "No a escuadra"

#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3290
#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
msgid "Measuring reference height of calibration point"
msgstr "Midiendo altura del punto de calibracion"

#. MSG_MESH c=12
#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
msgid "Mesh"
msgstr "Malla"

#. MSG_MESH_BED_LEVELING c=18
#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
#: ../../Firmware/ultralcd.cpp:4918
msgid "Mesh Bed Leveling"
msgstr "Nivela. Mesh Level"

#. MSG_MODE c=6
#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
#: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
#: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5785
#: ../../Firmware/ultralcd.cpp:5786 ../../Firmware/ultralcd.cpp:5787
#: ../../Firmware/ultralcd.cpp:5788 ../../Firmware/ultralcd.cpp:5872
msgid "Mode"
msgstr "Modo"

#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
#: ../../Firmware/ultralcd.cpp:3606
msgid "Mode change in progress..."
msgstr "Cambio de modo progresando ..."

#. MSG_MODEL c=8
#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
#: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
#: ../../Firmware/ultralcd.cpp:4592
msgid "Model"
msgstr "Modelo"

#. MSG_SELFTEST_MOTOR c=18
#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
#: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
msgid "Motor"
msgstr ""

#. MSG_MOVE_X c=18
#: ../../Firmware/ultralcd.cpp:3500
msgid "Move X"
msgstr "Mover X"

#. MSG_MOVE_Y c=18
#: ../../Firmware/ultralcd.cpp:3501
msgid "Move Y"
msgstr "Mover Y"

#. MSG_MOVE_Z c=18
#: ../../Firmware/ultralcd.cpp:3502
msgid "Move Z"
msgstr "Mover Z"

#. MSG_MOVE_AXIS c=18
#: ../../Firmware/ultralcd.cpp:4809
msgid "Move axis"
msgstr "Mover ejes"

#. MSG_NA c=3
#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
#: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
#: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
#: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
#: ../../Firmware/ultralcd.cpp:5844
msgid "N/A"
msgstr "N/D"

#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
#: ../../Firmware/util.cpp:199
msgid "New firmware version available:"
msgstr "Nuevo firmware disponible:"

#. MSG_NO c=4
#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
#: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
#: ../../Firmware/ultralcd.cpp:5996
msgid "No"
msgstr ""

#. MSG_NO_CARD c=18
#: ../../Firmware/ultralcd.cpp:5551
msgid "No SD card"
msgstr "No hay tarjeta SD"

#. MSG_NO_MOVE c=20
#: ../../Firmware/Marlin_main.cpp:5374
msgid "No move."
msgstr "Sin movimiento"

#. MSG_NONE c=8
#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
#: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
#: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
#: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
#: ../../Firmware/ultralcd.cpp:4663 ../../Firmware/ultralcd.cpp:4672
msgid "None"
msgstr "Ninguno"

#. MSG_NORMAL c=7
#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
#: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
#: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
msgid "Normal"
msgstr ""

#. MSG_SELFTEST_NOTCONNECTED c=20
#: ../../Firmware/ultralcd.cpp:6977
msgid "Not connected"
msgstr "No hay conexion"

#. MSG_SELFTEST_FAN_NO c=19
#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
#: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
msgid "Not spinning"
msgstr "Ventilador no gira"

#. MSG_WIZARD_V2_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:3970
msgid ""
"Now I will calibrate distance between tip of the nozzle and heatbed surface."
msgstr ""
"Voy a calibrar la distancia entre la punta de la boquilla y la superficie de "
"la base."

#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
#: ../../Firmware/ultralcd.cpp:4099
msgid "Now I will preheat nozzle for PLA."
msgstr "Ahora precalentare la boquilla para PLA."

#. MSG_REMOVE_TEST_PRINT c=20 r=4
#: ../../Firmware/ultralcd.cpp:4090
msgid "Now remove the test print from steel sheet."
msgstr "Ahora retira la prueba de la lamina de acero."

#. MSG_NOZZLE c=10
#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
#: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
#: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
#: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
msgid "Nozzle"
msgstr "Boquilla"

#. MSG_NOZZLE_DIAMETER c=10
#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
msgid "Nozzle d."
msgstr "D-boquilla"

#. MSG_OFF c=3
#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
#: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
#: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
#: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4842
#: ../../Firmware/ultralcd.cpp:5652 ../../Firmware/ultralcd.cpp:5749
#: ../../Firmware/ultralcd.cpp:5764 ../../Firmware/ultralcd.cpp:5775
#: ../../Firmware/ultralcd.cpp:5844 ../../Firmware/ultralcd.cpp:7852
#: ../../Firmware/ultralcd.cpp:7856
msgid "Off"
msgstr "Ina"

#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
#: ../../Firmware/Marlin_main.cpp:1532
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr ""
"Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del "
"extrusor, etc"

#. MSG_ON c=3
#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
#: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
#: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
#: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
#: ../../Firmware/ultralcd.cpp:4842 ../../Firmware/ultralcd.cpp:5753
#: ../../Firmware/ultralcd.cpp:5764 ../../Firmware/ultralcd.cpp:5773
#: ../../Firmware/ultralcd.cpp:5844 ../../Firmware/ultralcd.cpp:7852
#: ../../Firmware/ultralcd.cpp:7856
msgid "On"
msgstr "Act"

#. MSG_SOUND_ONCE c=7
#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
msgid "Once"
msgstr "Una vez"

#. MSG_PAUSED_THERMAL_ERROR c=20
#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
msgid "PAUSED THERMAL ERROR"
msgstr ""

#. MSG_PID_RUNNING c=20
#: ../../Firmware/ultralcd.cpp:1025
msgid "PID cal."
msgstr "Cal. PID"

#. MSG_PID_FINISHED c=20
#: ../../Firmware/ultralcd.cpp:1030
msgid "PID cal. finished"
msgstr "Cal. PID terminada"

#. MSG_PID_EXTRUDER c=17
#: ../../Firmware/ultralcd.cpp:4921
msgid "PID calibration"
msgstr "Calibracion PID"

#. MSG_PINDA_PREHEAT c=20
#: ../../Firmware/ultralcd.cpp:660
msgid "PINDA Heating"
msgstr "Calentando PINDA"

#. MSG_PINDA_CALIBRATION c=13
#: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
#: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
msgid "PINDA cal."
msgstr "Cal. PINDA"

#. MSG_PINDA_CAL_FAILED c=20 r=4
#: ../../Firmware/ultralcd.cpp:3369
msgid "PINDA calibration failed"
msgstr "Fallo de la calibracion de PINDA"

#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
#: ../../Firmware/ultralcd.cpp:3363
msgid ""
"PINDA calibration is finished and active. It can be disabled in menu "
"Settings->PINDA cal."
msgstr ""
"La calibracion PINDA esta finalizada y activa. Se puede desactivar en el "
"menu Configuracion->Cal. PINDA"

#. MSG_PAUSE c=5
#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
msgid "Pause"
msgstr "Pausa"

#. MSG_PAUSE_PRINT c=18
#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
#: ../../Firmware/ultralcd.cpp:5517
msgid "Pause print"
msgstr "Pausar impresion"

#. MSG_PAPER c=20 r=10
#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
msgid ""
"Place a sheet of paper under the nozzle during the calibration of first 4 "
"points. If the nozzle catches the paper, power off the printer immediately."
msgstr ""
"Colocar una hoja de papel sobre la superficie de impresion durante la "
"calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar "
"impresora inmediatamente."

#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
msgid ""
"Please check our handbook and fix the problem. Then resume the Wizard by "
"rebooting the printer."
msgstr ""
"Lee el manual y resuelve el problema. Despues, reinicia la impresora y "
"continua con el Wizard"

#. MSG_CHECK_IR_CONNECTION c=20 r=4
#: ../../Firmware/ultralcd.cpp:6258
msgid "Please check the IR sensor connection, unload filament if present."
msgstr ""
"Por favor comprueba la conexion del IR sensor y filamento esta descargado."

#. MSG_SELFTEST_PLEASECHECK c=20
#: ../../Firmware/ultralcd.cpp:6971
msgid "Please check:"
msgstr "Controla:"

#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
#: ../../Firmware/ultralcd.cpp:4156
msgid "Please clean heatbed and then press the knob."
msgstr "Limpia la superficie de la base, por favor, y luego presione el dial."

#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
msgid "Please clean the nozzle for calibration. Click when done."
msgstr "Limpia boquilla para calibracion. Click cuando acabes."

#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
#: ../../Firmware/ultralcd.cpp:3953
msgid ""
"Please insert filament into the extruder, then press the knob to load it."
msgstr ""
"Por favor, coloca el filamento en el extrusor, luego presiona el dial para "
"cargarlo."

#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
#: ../../Firmware/ultralcd.cpp:3948
msgid ""
"Please insert filament into the first tube of the MMU, then press the knob "
"to load it."
msgstr ""
"Por favor, coloca el filamento en el primer tubo de la MMU, luego pulsa el "
"dial para cargarlo."

#. MSG_PLEASE_LOAD_PLA c=20 r=4
#: ../../Firmware/ultralcd.cpp:3871
msgid "Please load filament first."
msgstr "Por favor, cargar primero el filamento."

#. MSG_CHECK_IDLER c=20 r=5
#: ../../Firmware/Marlin_main.cpp:3548
msgid "Please open idler and remove filament manually."
msgstr ""
"Por favor abate el rodillo de empuje (idler) y retira el filamento "
"manualmente."

#. MSG_PLACE_STEEL_SHEET c=20 r=5
#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
#: ../../Firmware/ultralcd.cpp:4093
msgid "Please place steel sheet on heatbed."
msgstr "Por favor coloca la chapa de acero en la base calefactable."

#. MSG_PRESS_TO_UNLOAD c=20 r=4
#: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
#: ../../Firmware/messages.cpp:74
msgid "Please press the knob to unload filament"
msgstr "Por favor, pulsa el dial para descargar el filamento"

#. MSG_PULL_OUT_FILAMENT c=20 r=4
#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
msgid "Please pull out filament immediately"
msgstr "Por favor retire el filamento de inmediato"

#. MSG_EJECT_REMOVE c=20 r=4
#: ../../Firmware/mmu.cpp:1082
msgid "Please remove filament and then press the knob."
msgstr "Por favor quite el filamento y luego presione el dial."

#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
#: ../../Firmware/ultralcd.cpp:4089
msgid "Please remove shipping helpers first."
msgstr "Por favor retira los soportes de envio primero."

#. MSG_REMOVE_STEEL_SHEET c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
#: ../../Firmware/messages.cpp:79
msgid "Please remove steel sheet from heatbed."
msgstr "Por favor retire la chapa de acero de la base calefactable."

#. MSG_RUN_XYZ c=20 r=4
#: ../../Firmware/Marlin_main.cpp:4869
msgid "Please run XYZ calibration first."
msgstr "Por favor realiza la calibracion XYZ primero."

#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
#: ../../Firmware/ultralcd.cpp:6255
msgid "Please unload the filament first, then repeat this action."
msgstr "Primero descargue el filamento, luego repita esta accion."

#. MSG_UPDATE_MMU2_FW c=20 r=4
#: ../../Firmware/mmu.cpp:1002
msgid "Please update firmware in your MMU2. Waiting for reset."
msgstr "Por favor actualice el firmware en tu MMU2. Esperando el reseteo."

#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
#: ../../Firmware/util.cpp:203
msgid "Please upgrade."
msgstr "Actualize por favor"

#. MSG_PLEASE_WAIT c=20
#: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
#: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
msgid "Please wait"
msgstr "Por Favor Espere"

#. MSG_POWER_FAILURES c=15
#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
msgid "Power failures"
msgstr "Fallas energia"

#. MSG_PREHEAT c=18
#: ../../Firmware/ultralcd.cpp:5510
msgid "Preheat"
msgstr "Precalentar"

#. MSG_PREHEAT_NOZZLE c=20
#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
msgid "Preheat the nozzle!"
msgstr "Precalienta extrusor"

#. MSG_WIZARD_HEATING c=20 r=3
#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
#: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
msgid "Preheating nozzle. Please wait."
msgstr "Precalentando nozzle. Espera por favor."

#. MSG_PREHEATING_TO_CUT c=20
#: ../../Firmware/ultralcd.cpp:1996
msgid "Preheating to cut"
msgstr "Precalent. laminar"

#. MSG_PREHEATING_TO_EJECT c=20
#: ../../Firmware/ultralcd.cpp:1993
msgid "Preheating to eject"
msgstr "Precalent. expulsar"

#. MSG_PREHEATING_TO_LOAD c=20
#: ../../Firmware/ultralcd.cpp:1984
msgid "Preheating to load"
msgstr "Precalent. cargar"

#. MSG_PREHEATING_TO_UNLOAD c=20
#: ../../Firmware/ultralcd.cpp:1989
msgid "Preheating to unload"
msgstr "Precalent. descargar"

#. MSG_PRESS_KNOB c=20
#: ../../Firmware/ultralcd.cpp:1817
msgid "Press the knob"
msgstr "Pulsa el dial"

#. MSG_PRESS_TO_PREHEAT c=20 r=4
#: ../../Firmware/Marlin_main.cpp:11608
msgid "Press the knob to preheat nozzle and continue."
msgstr "Pulsa el dial para precalentar la boquilla y continue."

#. MSG_RESUME_NOZZLE_TEMP c=20 r=4
#: ../../Firmware/mmu.cpp:727
msgid "Press the knob to resume nozzle temperature."
msgstr "Presione el dial para continuar con la temperatura de la boquilla."

#. MSG_PRINT_ABORTED c=20
#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
msgid "Print aborted"
msgstr "Impresion cancelada"

#. MSG_PRINT_FAN_SPEED c=16
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
#: ../../Firmware/ultralcd.cpp:7332
msgid "Print fan:"
msgstr "Vent.fusor:"

#. MSG_CARD_MENU c=18
#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
msgid "Print from SD"
msgstr "Menu tarjeta SD"

#. MSG_PRINT_PAUSED c=20
#: ../../Firmware/ultralcd.cpp:874
msgid "Print paused"
msgstr "Impresion en pausa"

#. MSG_PRINT_TIME c=19
#: ../../Firmware/ultralcd.cpp:2374
msgid "Print time"
msgstr "Tiempo de imp."

#. MSG_PRINTER_IP c=18
#: ../../Firmware/ultralcd.cpp:1719
msgid "Printer IP Addr:"
msgstr "Dir. IP impresora:"

#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
msgid ""
"Printer has not been calibrated yet. Please follow the manual, chapter First "
"steps, section Calibration flow."
msgstr ""
"Impresora no esta calibrada todavia. Por favor usa el manual capitulo "
"Primeros pasos Calibracion flujo."

#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
#: ../../Firmware/util.cpp:299
msgid "Printer nozzle diameter differs from the G-code. Continue?"
msgstr "Diametro nozzle impresora difiere de cod.G. Continuar?"

#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
#: ../../Firmware/util.cpp:305
msgid ""
"Printer nozzle diameter differs from the G-code. Please check the value in "
"settings. Print cancelled."
msgstr ""
"Diametro nozzle Impresora difiere de cod.G. Comprueba los valores en "
"ajustes. Impresion cancelada."

#. MSG_RPI_PORT c=13
#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
msgid "RPi port"
msgstr "Puerto RPi"

#. MSG_BED_CORRECTION_REAR c=14
#: ../../Firmware/ultralcd.cpp:2763
msgid "Rear side [μm]"
msgstr "Trasera [μm]"

#. MSG_RECOVERING_PRINT c=20
#: ../../Firmware/Marlin_main.cpp:10951
msgid "Recovering print"
msgstr "Recuper. impresion"

#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
#: ../../Firmware/mmu.cpp:831
msgid "Remove old filament and press the knob to start loading new filament."
msgstr ""
"Retire el filamento viejo y presione el dial para comenzar a cargar el nuevo "
"filamento."

#. MSG_RENAME c=18
#: ../../Firmware/ultralcd.cpp:5434
msgid "Rename"
msgstr "Renombrar"

#. MSG_RESET c=14
#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
#: ../../Firmware/ultralcd.cpp:5435
msgid "Reset"
msgstr ""

#. MSG_CALIBRATE_BED_RESET c=18
#: ../../Firmware/ultralcd.cpp:4925
msgid "Reset XYZ calibr."
msgstr ""

#. MSG_RESUME_PRINT c=18
#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
#: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
msgid "Resume print"
msgstr "Reanudar impres."

#. MSG_RESUMING_PRINT c=20
#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
msgid "Resuming print"
msgstr "Continuan. impresion"

#. MSG_RIGHT c=10
#: ../../Firmware/ultralcd.cpp:2505
msgid "Right"
msgstr "Derecha"

#. MSG_BED_CORRECTION_RIGHT c=14
#: ../../Firmware/ultralcd.cpp:2761
msgid "Right side[μm]"
msgstr "Derecha [μm]"

#. MSG_WIZARD_RERUN c=20 r=7
#: ../../Firmware/ultralcd.cpp:3892
msgid ""
"Running Wizard will delete current calibration results and start from the "
"beginning. Continue?"
msgstr ""
"Ejecutar el Wizard borrara los valores de calibracion actuales y comenzara "
"de nuevo. Continuar?"

#. MSG_RUNOUTS c=7
#: ../../Firmware/ultralcd.cpp:1279
msgid "Runouts"
msgstr "Falla"

#. MSG_SD_CARD c=8
#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
#: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
#: ../../Firmware/ultralcd.cpp:4424
msgid "SD card"
msgstr "Tarj. SD"

#. MSG_STOPPED c=20
#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
msgid "STOPPED."
msgstr "PARADA"

#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
msgid "Searching bed calibration point"
msgstr "Buscando punto de calibracion base"

#. MSG_SELECT c=18
#: ../../Firmware/ultralcd.cpp:5427
msgid "Select"
msgstr "Seleccionar"

#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
#: ../../Firmware/ultralcd.cpp:3974
msgid ""
"Select a filament for the First Layer Calibration and select it in the on-"
"screen menu."
msgstr ""
"Escoge un filamento para la Calibracion de la Primera Capa y seleccionalo en "
"el menu en pantalla."

#. MSG_SELECT_EXTRUDER c=20
#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
msgid "Select extruder:"
msgstr "Elegir extrusor:"

#. MSG_SELECT_FILAMENT c=20
#: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
msgid "Select filament:"
msgstr "Selecciona filam.:"

#. MSG_SELECT_LANGUAGE c=18
#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
#: ../../Firmware/ultralcd.cpp:4849
msgid "Select language"
msgstr "Cambiar el idioma"

#. MSG_SEL_PREHEAT_TEMP c=20 r=6
#: ../../Firmware/ultralcd.cpp:4130
msgid "Select nozzle preheat temperature which matches your material."
msgstr ""
"Selecciona la temperatura para precalentar la boquilla que se ajuste a tu "
"material."

#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:3979
msgid "Select temperature which matches your material."
msgstr "Selecciona la temperatura adecuada a tu material."

#. MSG_SELFTEST_OK c=20
#: ../../Firmware/ultralcd.cpp:6530
msgid "Self test OK"
msgstr ""

#. MSG_SELFTEST_START c=20
#: ../../Firmware/ultralcd.cpp:6298
msgid "Self test start"
msgstr "Iniciar Selftest"

#. MSG_SELFTEST c=18
#: ../../Firmware/ultralcd.cpp:4912
msgid "Selftest"
msgstr ""

#. MSG_SELFTEST_ERROR c=20
#: ../../Firmware/ultralcd.cpp:6970
msgid "Selftest error!"
msgstr "Error Selftest!"

#. MSG_SELFTEST_FAILED c=20
#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
#: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
msgid "Selftest failed"
msgstr "Fallo Selftest"

#. MSG_FORCE_SELFTEST c=20 r=8
#: ../../Firmware/Marlin_main.cpp:1564
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr ""
"Se realizara el auto-test para calibrar con precision la vuelta a la "
"posicion inicial sin sensores."

#. MSG_INFO_SENSORS c=18
#: ../../Firmware/ultralcd.cpp:1731
msgid "Sensor info"
msgstr "Info sensor"

#. MSG_FS_VERIFIED c=20 r=3
#: ../../Firmware/ultralcd.cpp:6262
msgid "Sensor verified, remove the filament now."
msgstr "Sensor verificado, retire el filamento ahora."

#. MSG_SET_TEMPERATURE c=20
#: ../../Firmware/ultralcd.cpp:2781
msgid "Set temperature:"
msgstr "Establecer temp.:"

#. MSG_SETTINGS c=18
#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
#: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
#: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
#: ../../Firmware/ultralcd.cpp:5888
msgid "Settings"
msgstr "Configuracion"

#. MSG_SEVERE_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2548
msgid "Severe skew"
msgstr "Severo sesgar"

#. MSG_SHEET c=10
#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
#: ../../Firmware/messages.cpp:60
msgid "Sheet"
msgstr "Lamina"

#. MSG_SHEET_OFFSET c=20 r=4
#: ../../Firmware/ultralcd.cpp:3832
msgid ""
"Sheet %.7s\n"
"Z offset: %+1.3fmm\n"
"%cContinue\n"
"%cReset"
msgstr ""
"Lamina %.7s\n"
"Z offset: %+1.3fmm\n"
"%cContinuar\n"
"%cReset"

#. MSG_SHOW_END_STOPS c=18
#: ../../Firmware/ultralcd.cpp:4923
msgid "Show end stops"
msgstr "Mostrar endstops"

#. MSG_SILENT c=7
#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
#: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
msgid "Silent"
msgstr "Acallar"

#. MSG_SLIGHT_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2547
msgid "Slight skew"
msgstr "Ligera sesgar"

#. MSG_FILE_CNT c=20 r=6
#: ../../Firmware/cardreader.cpp:818
msgid ""
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
"100."
msgstr ""
"Algunos archivos no se ordenaran. Maximo 100 archivos por carpeta para "
"ordenar."

#. MSG_ZLEVELING_ENFORCED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3057
msgid "Some problem encountered, Z-leveling enforced ..."
msgstr "Problema encontrado, nivelacion Z forzosa ..."

#. MSG_SORT c=7
#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
msgid "Sort"
msgstr "Ordenar"

#. MSG_SORTING_FILES c=20
#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
#: ../../Firmware/messages.cpp:96
msgid "Sorting files"
msgstr "Ordenando archivos"

#. MSG_SOUND c=9
#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
#: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
#: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
msgid "Sound"
msgstr "Sonido"

#. MSG_SPEED c=15
#: ../../Firmware/ultralcd.cpp:5726
msgid "Speed"
msgstr "Velocidad"

#. MSG_SELFTEST_FAN_YES c=19
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
#: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
msgid "Spinning"
msgstr "Ventilador girando"

#. MSG_TEMP_CAL_WARNING c=20 r=4
#: ../../Firmware/Marlin_main.cpp:4882
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr ""
"Se necesita una temperatura ambiente ente 21 y 26C y un soporte rigido."

#. MSG_STATISTICS c=18
#: ../../Firmware/ultralcd.cpp:5593
msgid "Statistics"
msgstr "Estadisticas"

#. MSG_STEALTH c=7
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
#: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
msgid "Stealth"
msgstr "Sigilo"

#. MSG_STEEL_SHEETS c=18
#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
#: ../../Firmware/ultralcd.cpp:5424
msgid "Steel sheets"
msgstr "Lamina de acero"

#. MSG_STOP_PRINT c=18
#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
#: ../../Firmware/ultralcd.cpp:5995
msgid "Stop print"
msgstr "Detener impresion"

#. MSG_STRICT c=8
#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
#: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
#: ../../Firmware/ultralcd.cpp:4669
msgid "Strict"
msgstr "Estrict"

#. MSG_SUPPORT c=18
#: ../../Firmware/ultralcd.cpp:5602
msgid "Support"
msgstr "Soporte"

#. MSG_SELFTEST_SWAPPED c=16
#: ../../Firmware/ultralcd.cpp:7029
msgid "Swapped"
msgstr "Intercambiado"

#. MSG_THERMAL_ANOMALY c=20
#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
msgid "THERMAL ANOMALY"
msgstr ""

#. MSG_TM_AUTOTUNE_FAILED c=20
#: ../../Firmware/temperature.cpp:2899
msgid "TM autotune failed"
msgstr ""

#. MSG_TEMP_MODEL_AUTOTUNE c=20
#: ../../Firmware/temperature.cpp:2884
msgid "Temp. model autotune"
msgstr ""

#. MSG_TEMPERATURE c=18
#: ../../Firmware/ultralcd.cpp:4805
msgid "Temperature"
msgstr "Temperatura"

#. MSG_MENU_TEMPERATURES c=18
#: ../../Firmware/ultralcd.cpp:1737
msgid "Temperatures"
msgstr "Temperaturas"

#. MSG_WIZARD_V2_CAL_2 c=20 r=12
#: ../../Firmware/ultralcd.cpp:3982
msgid ""
"The printer will start printing a zig-zag line. Rotate the knob until you "
"reach the optimal height. Check the pictures in the handbook (Calibration "
"chapter)."
msgstr ""
"La impresora comenzara a imprimir una linea en zig-zag. Gira el dial hasta "
"que la linea alcance la altura optima. Mira las fotos del manual (Capitulo "
"de calibracion)."

#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
msgid ""
"There is still a need to make Z calibration. Please follow the manual, "
"chapter First steps, section Calibration flow."
msgstr ""
"Todavia es necesario hacer una calibracion Z. Por favor siga el manual, "
"capitulo Primeros pasos, seccion Calibracion del flujo."

#. MSG_SORT_TIME c=8
#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
msgid "Time"
msgstr "Fecha"

#. MSG_TIMEOUT c=12
#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
msgid "Timeout"
msgstr "Expirar"

#. MSG_TOTAL c=6
#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
#: ../../Firmware/ultralcd.cpp:1305
msgid "Total"
msgstr ""

#. MSG_TOTAL_FAILURES c=20
#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
#: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
msgid "Total failures"
msgstr "Fallos totales"

#. MSG_TOTAL_FILAMENT c=19
#: ../../Firmware/ultralcd.cpp:2395
msgid "Total filament"
msgstr "Filamento total"

#. MSG_TOTAL_PRINT_TIME c=19
#: ../../Firmware/ultralcd.cpp:2396
msgid "Total print time"
msgstr "Tiempo total"

#. MSG_TUNE c=18
#: ../../Firmware/ultralcd.cpp:5508
msgid "Tune"
msgstr "Ajustar"

#. MSG_UNLOAD_FILAMENT c=18
#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
#: ../../Firmware/ultralcd.cpp:5586
msgid "Unload filament"
msgstr "Soltar filamento"

#. MSG_UNLOADING_FILAMENT c=20
#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
#: ../../Firmware/ultralcd.cpp:5205
msgid "Unloading filament"
msgstr "Soltando filamento"

#. MSG_FIL_FAILED c=20 r=5
#: ../../Firmware/ultralcd.cpp:6266
msgid "Verification failed, remove the filament and try again."
msgstr "La verificacion fallo, retire el filamento e intente nuevamente."

#. MSG_MENU_VOLTAGES c=18
#: ../../Firmware/ultralcd.cpp:1740
msgid "Voltages"
msgstr "Voltajes"

#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
#: ../../Firmware/ultralcd.cpp:3542
msgid ""
"WARNING:\n"
"Crash detection\n"
"disabled in\n"
"Stealth mode"
msgstr ""
"ATENCION:\n"
"Dec. choque\n"
"desactivada en\n"
"Modo silencio"

#. MSG_USERWAIT c=20
#: ../../Firmware/Marlin_main.cpp:4087
msgid "Wait for user..."
msgstr "Esperando ordenes..."

#. MSG_WAITING_TEMP_PINDA c=20 r=3
#: ../../Firmware/ultralcd.cpp:2889
msgid "Waiting for PINDA probe cooling"
msgstr "Esperando a que se enfrie la sonda PINDA"

#. MSG_WAITING_TEMP c=20 r=4
#: ../../Firmware/ultralcd.cpp:2921
msgid "Waiting for nozzle and bed cooling"
msgstr "Esperando enfriamiento de la base y extrusor."

#. MSG_WARN c=8
#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
#: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
#: ../../Firmware/ultralcd.cpp:4666
msgid "Warn"
msgstr "Aviso"

#. MSG_CHANGED_BOTH c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1524
msgid "Warning: both printer type and motherboard type changed."
msgstr ""
"Aviso: tanto el tipo de impresora como el tipo de la placa han cambiado."

#. MSG_CHANGED_MOTHERBOARD c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1516
msgid "Warning: motherboard type changed."
msgstr "Cuidado: el tipo de placa ha cambiado."

#. MSG_CHANGED_PRINTER c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1520
msgid "Warning: printer type changed."
msgstr "Cuidado: Ha cambiado el tipo de impresora."

#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
#: ../../Firmware/Marlin_main.cpp:3539
msgid "Was filament unload successful?"
msgstr "Se descargo con exito el filamento?"

#. MSG_SELFTEST_WIRINGERROR c=18
#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
#: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
msgid "Wiring error"
msgstr "Error de conexion"

#. MSG_WIZARD c=17
#: ../../Firmware/ultralcd.cpp:4903
msgid "Wizard"
msgstr ""

#. MSG_X_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:4218
msgid "X-correct:"
msgstr "Corregir-X:"

#. MSG_XFLASH c=18
#: ../../Firmware/ultralcd.cpp:5604
msgid "XFLASH init"
msgstr ""

#. MSG_XYZ_DETAILS c=18
#: ../../Firmware/ultralcd.cpp:1729
msgid "XYZ cal. details"
msgstr "Detalles cal. XYZ"

#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
#: ../../Firmware/ultralcd.cpp:3341
msgid "XYZ calibration all right. Skew will be corrected automatically."
msgstr "Calibracion XYZ correcta. La inclinacion se corregira automaticamente."

#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
#: ../../Firmware/ultralcd.cpp:3338
msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
msgstr ""
"Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen "
"trabajo!"

#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3319
msgid "XYZ calibration compromised. Front calibration points not reachable."
msgstr "Calibrazion XYZ comprometida. Puntos frontales no alcanzables."

#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3325
msgid ""
"XYZ calibration compromised. Left front calibration point not reachable."
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3322
msgid ""
"XYZ calibration compromised. Right front calibration point not reachable."
msgstr "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable."

#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
#: ../../Firmware/ultralcd.cpp:3301
msgid "XYZ calibration failed. Bed calibration point was not found."
msgstr ""
"Calibracion XYZ fallada. Puntos de calibracion en la base no encontrados."

#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
#: ../../Firmware/ultralcd.cpp:3307
msgid "XYZ calibration failed. Front calibration points not reachable."
msgstr "Calibracion XYZ fallada. Puntos frontales no alcanzables."

#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3313
msgid "XYZ calibration failed. Left front calibration point not reachable."
msgstr ""

#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
#: ../../Firmware/ultralcd.cpp:3332
msgid "XYZ calibration failed. Please consult the manual."
msgstr "Calibracion XYZ fallada. Consulta el manual por favor."

#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
#: ../../Firmware/ultralcd.cpp:3310
msgid "XYZ calibration failed. Right front calibration point not reachable."
msgstr "Calibracion XYZ fallad. Punto frontal derecho no alcanzable."

#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
#: ../../Firmware/ultralcd.cpp:3335
msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
msgstr "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!"

#. MSG_Y_DIST_FROM_MIN c=20
#: ../../Firmware/ultralcd.cpp:2502
msgid "Y distance from min"
msgstr "Dist. en Y desde min"

#. MSG_Y_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:4219
msgid "Y-correct:"
msgstr "Corregir-Y:"

#. MSG_YES c=4
#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
#: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
#: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
msgid "Yes"
msgstr "Si"

#. MSG_FW_VERSION_ALPHA c=20 r=8
#: ../../Firmware/Marlin_main.cpp:846
msgid ""
"You are using firmware alpha version. This is development version. Using "
"this version is not recommended and may cause printer damage."
msgstr ""

#. MSG_FW_VERSION_BETA c=20 r=8
#: ../../Firmware/Marlin_main.cpp:847
msgid ""
"You are using firmware beta version. This is development version. Using this "
"version is not recommended and may cause printer damage."
msgstr ""

#. MSG_WIZARD_QUIT c=20 r=8
#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
msgid "You can always resume the Wizard from Calibration -> Wizard."
msgstr "Siempre puedes acceder al asistente desde Calibracion -> Wizard"

#. MSG_Z_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:4220
msgid "Z-correct:"
msgstr "Corregir-Z:"

#. MSG_Z_PROBE_NR c=14
#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
msgid "Z-probe nr."
msgstr "Z-sensor nr."

#. MSG_MEASURED_OFFSET c=20
#: ../../Firmware/ultralcd.cpp:2573
msgid "[0;0] point offset"
msgstr "[0;0] punto offset"

#. MSG_PRESS c=20 r=2
#: ../../Firmware/ultralcd.cpp:2162
msgid "and press the knob"
msgstr "y presione el dial"

#. MSG_TO_LOAD_FIL c=20
#: ../../Firmware/ultralcd.cpp:1824
msgid "to load filament"
msgstr "para cargar el fil."

#. MSG_TO_UNLOAD_FIL c=20
#: ../../Firmware/ultralcd.cpp:1828
msgid "to unload filament"
msgstr "para descargar fil."

#. MSG_UNKNOWN c=13
#: ../../Firmware/ultralcd.cpp:1696
msgid "unknown"
msgstr "desconocido"

#. MSG_IR_UNKNOWN c=18
#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
msgid "unknown state"
msgstr "estado desconocido"

#. MSG_REFRESH c=18
#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
#: ../../Firmware/ultralcd.cpp:6088
msgid "🔃Refresh"
msgstr "🔃Actualizar"

#~ msgid "Crash detected. Resume print?"
#~ msgstr "Choque detectado. Continuar impresion?"

#~ msgid "M117 First layer cal."
#~ msgstr "M117 Cal. primera cap."