3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
048628083a
Prusa-Firmware/Firmware
History
Yuri D'Elia 048628083a Remove clear_current_adv_vars() 
The pressure state is already reset implicitly at the end of each block,
meaning an extruder switch will never have to reset the internal state
anyway.

We clear the internal backpressure in the following conditions:

- when switching to a non-LA block
- when quickStop is called
- when the scheduler is idling (losing pressure)
2019-06-05 20:25:19 +02:00
..
variants Merge pull request #1658 from Harpalyke/save-ustep-res-with-M500 2019-05-13 17:08:34 +02:00
adc.c Fix PFW644 - MK25 reports stopped, arduino 1.8.5. 2018-11-03 22:44:42 +01:00
adc.h Fix ADC index overflow 2018-07-17 17:55:04 +02:00
AutoDeplete.cpp Comment. 2019-01-04 19:56:15 +01:00
AutoDeplete.h Add filament auto deplete engine for multi-material prints with MMUv2. 2019-01-03 22:58:25 +01:00
BlinkM.cpp
BlinkM.h
boards.h MK3 configuration files, renamed EINY to EINSY 2018-02-01 17:10:41 +01:00
bootapp.c New lang, arduino 1.8.5 - boot_app debug output 2018-10-18 16:20:14 +02:00
bootapp.h New lang, arduino 1.8.5 - boot_app debug output 2018-10-18 16:20:14 +02:00
cardreader.cpp recovery from "Stop()" 2019-05-18 21:28:59 +02:00
cardreader.h recovery from "Stop()" 2019-05-18 21:28:59 +02:00
cmdqueue.cpp Deleted bad cols/rows definitions for translation. 2019-05-07 12:52:23 +02:00
cmdqueue.h Save 88B FLASH and fix compiler warnings: 2018-07-25 21:18:29 +02:00
config.h Decrease flash reserved for secondary language. 2019-05-14 16:10:04 +02:00
Configuration_adv.h Typos 2019-05-26 21:06:29 +02:00
Configuration.h Increase version 3.7.1 final. 2019-05-13 15:09:58 +02:00
ConfigurationStore.cpp Fixup prefix echomagic for the LA config report 2019-05-24 17:08:32 +02:00
ConfigurationStore.h Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S 2019-03-19 21:39:59 +00:00
conv2str.cpp LCD menu optimalization - conversion functions - source separation 2018-07-16 17:23:35 +02:00
conv2str.h LCD menu optimalization - conversion functions - source separation 2018-07-16 17:23:35 +02:00
Dcodes.cpp MK2.5 - watchdog enabled + test (command "D-1") 2019-04-29 13:19:59 +02:00
Dcodes.h Merge branch 'MK25' into MK3 2018-03-13 20:43:19 +01:00
doxyfile Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 2018-10-08 15:58:49 +02:00
eeprom.h Save/restore K during a power panic 2019-06-03 17:33:19 +02:00
fastio.h WRITE_NC macro for non-critical (non-synchronized) access to 2018-01-12 20:15:59 +01:00
Firmware.ino LCD menu optimalization - LiquidCrystal_Prusa removed 2018-07-16 23:23:15 +02:00
fsensor.cpp Do a full fsensor_update() when initializing the sensor 2019-06-03 17:32:57 +02:00
fsensor.h Elide fsensor_st_block_begin, saving some cycles/bytes 2019-06-03 17:32:43 +02:00
io_atmega2560.h New ML support - added missing file 2018-06-08 15:38:16 +02:00
language.c Fix warning: assignment makes pointer from integer without a cast. 2019-03-05 16:27:47 +01:00
language.h New lang - fixed french langcode and comparsion in lang-clean script 2018-10-25 18:16:36 +02:00
lcd.cpp Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation. 2019-01-27 22:48:51 +01:00
lcd.h Do not kill printer if External SPI flash W25X20CL is not responding. 2019-04-16 22:20:53 +02:00
le.sh make all shell scripts executable 2018-12-10 07:09:03 -07:00
Marlin_main.cpp Remove clear_current_adv_vars() 2019-06-05 20:25:19 +02:00
Marlin.h Extract duplicate code into function. Saves 4B of flash. 2019-05-15 16:31:10 +02:00
MarlinSerial.cpp Optimized LiquidCrystal class 2018-06-08 14:35:47 +02:00
MarlinSerial.h New ML support - external flash W25X20CL - upgrade is working!!! (hardcoded to german) 2018-06-09 17:49:41 +02:00
menu.cpp Allow to live-tune K during a print 2019-05-25 18:41:21 +02:00
menu.h Allow to live-tune K during a print 2019-05-25 18:41:21 +02:00
mesh_bed_calibration.cpp Deleted bad cols/rows definitions for translation. 2019-05-07 12:52:23 +02:00
mesh_bed_calibration.h Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update 2019-03-14 01:52:44 +01:00
mesh_bed_leveling.cpp 7x7 points mesh bed leveling 2019-02-14 10:57:58 +02:00
mesh_bed_leveling.h
messages.c Generate menu item texts Cut filament <nr.> during runtime to conserve flash. 2019-05-14 16:25:29 +02:00
messages.h Generate menu item texts Cut filament <nr.> during runtime to conserve flash. 2019-05-14 16:25:29 +02:00
mmu.cpp Merge branch 'MK3' into rise_z 2019-05-15 16:37:17 +02:00
mmu.h sketch/menu.h:90:115: warning: invalid conversion from 'void (*)(int)' to 'void (*)(uint8_t) {aka void (*)(unsigned char)}' [-fpermissive] 2019-05-14 18:25:43 +02:00
motion_control.cpp
motion_control.h
optiboot_w25x20cl.cpp Do not kill printer if External SPI flash W25X20CL is not responding. 2019-04-16 22:20:53 +02:00
optiboot_w25x20cl.h Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
pat9125.c Fix compiler warning arduino-1.6.9/hardware/tools/avr/avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>." [-Wcpp] 2018-07-23 18:12:08 +02:00
pat9125.h PAT9125 optimalization (rewrited to C, 8bit sampling) 2018-07-12 18:11:07 +02:00
pins_Einsy_1_0.h Conditional translation for fan control (FAN_SOFT_PWM), temporary disabled lcd backlight control 2019-02-04 01:32:04 +01:00
pins_Rambo_1_0.h MK2.5 IR_SENSOR_PIN modified 2019-02-11 14:32:21 +01:00
pins_Rambo_1_3.h debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified 2019-03-06 19:56:48 +01:00
pins.h Fix compiler warnings macro redefined. 2019-03-05 15:56:20 +01:00
planner.cpp Fix position_float after a quickStop condition 2019-06-05 20:25:05 +02:00
planner.h Minor reformatting 2019-05-24 17:08:32 +02:00
printers.h variants 2019-01-28 21:12:38 +01:00
qr_solve.cpp
qr_solve.h
rbuf.c T-codes for MMU_V2: initial version 2018-07-09 13:57:36 +02:00
rbuf.h T-codes for MMU_V2: initial version 2018-07-09 13:57:36 +02:00
Sd2Card.cpp Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation. 2019-01-27 22:48:51 +01:00
Sd2Card.h
Sd2PinMap.h
SdBaseFile.cpp
SdBaseFile.h
SdFatConfig.h
SdFatStructs.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
SdFatUtil.cpp Fix compiler warning: sketch/SdFatUtil.cpp:49:7: warning: unused variable 'i' [-Wunused-variable] 2018-07-25 15:19:10 +02:00
SdFatUtil.h
SdFile.cpp
SdFile.h Optimized LiquidCrystal class 2018-06-08 14:35:47 +02:00
SdInfo.h
SdVolume.cpp
SdVolume.h
Servo.cpp
Servo.h
sm4.c Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 2018-10-08 15:58:49 +02:00
sm4.h New XYZ calibration with image processing 2018-03-13 12:55:35 +01:00
sound.cpp MeshBed Leveling Fail 2018-11-02 23:03:14 +01:00
sound.h Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 2018-10-08 15:58:49 +02:00
speed_lookuptable.cpp Move speed lookup defs into a separate source 2019-05-24 17:08:32 +02:00
speed_lookuptable.h Move calc_timer into speed_lookup_table for planner reuse 2019-05-24 17:08:32 +02:00
spi.c New SPI (do not use Arduino SPI class) 2018-03-29 17:42:41 +02:00
spi.h New ML support - W25X20CL external spi flash support 2018-06-08 00:20:28 +02:00
static_assert.h static_assert - portable solution compatible with C++98 2018-09-27 19:59:29 +02:00
stepper.cpp Remove clear_current_adv_vars() 2019-06-05 20:25:19 +02:00
stepper.h Remove clear_current_adv_vars() 2019-06-05 20:25:19 +02:00
stk500.h Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
swi2c.c Fix compiler warning arduino-1.6.9/hardware/tools/avr/avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>." [-Wcpp] 2018-07-23 13:47:15 +02:00
swi2c.h SWI2C for PAT9125 simplified/optimized 2018-07-12 17:55:38 +02:00
swspi.cpp
swspi.h
system_timer.h Bed high frequency PWM disabled 2019-04-16 16:48:01 +02:00
temperature.cpp pause printer by flag 2019-05-23 13:13:11 +02:00
temperature.h pause printer by flag 2019-05-23 13:13:11 +02:00
thermistortables.h New ML support - menu tunning, startup 2018-06-10 16:04:32 +02:00
timer02.c return with exitcode 1 if any language not generated properly 2019-05-06 15:29:57 +02:00
timer02.h Fixed timer2 colission with arduino framework around "tone" function. 2019-02-05 19:08:57 +01:00
Timer.cpp Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2. 2019-01-28 19:29:31 +01:00
Timer.h Store timer period in TimerRemaining. 2018-06-11 23:41:36 +02:00
TimerRemaining.h Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2. 2019-01-28 19:29:31 +01:00
tmc2130.cpp Reporty busy: paused for user in case MMU is not responding. 2019-04-04 19:04:15 +02:00
tmc2130.h M907 fix - value in mA (PFW) 2018-11-12 20:39:25 +01:00
uart2.c Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 2018-10-08 15:58:49 +02:00
uart2.h MMU - communication, check after start, code cleaning 2018-08-07 20:37:59 +02:00
ultralcd.cpp Remove version check 2019-05-26 22:43:06 +02:00
ultralcd.h sketch/menu.h:90:115: warning: invalid conversion from 'void (*)(int)' to 'void (*)(uint8_t) {aka void (*)(unsigned char)}' [-fpermissive] 2019-05-14 18:25:43 +02:00
uni_avr_rpi.h Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"" 2018-07-23 13:35:38 +02:00
util.cpp Merge pull request #1437 from craiglink/memory-overrun 2019-05-11 03:01:52 +02:00
util.h force selftest if user upgraded from 3.1.2-RC1 or older fw version 2018-02-27 17:52:13 +01:00
vector_3.cpp
vector_3.h
w25x20cl.c Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
w25x20cl.h Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
xyzcal.cpp Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation. 2019-01-27 22:48:51 +01:00
xyzcal.h XYZ calibration - accuracy improvement 2018-03-27 17:27:41 +02:00