0d7680dbf7
* lang: Add a PO language extractor with FW metadata support
Implement a straight-to-po language extractor which supports our custom
language requirements:
- _i/_I/ISTR for text string definitions
- _T for catalog translations (with back-reference support)
- //// EOL comments with:
- MSG_ catalog entry name identifiers
- c=X r=Y annotations for screen dimensioning checks
- Crude support for commented lines
All source locations are correctly referenced in the PO, with the
metadata colleted in the comment for further processing.
Several checks are implemented already during extraction:
- Correct catalog name assignment (no duplicates)
- Metadata checks for each entry
Further checks will be implemented by directly checking the translated PO file.
Requires "polib" and "regex" python modules.
* lang: Adapt lang-check to work directly on PO/POT files
* lang: Allow lang-extract to generate stable (pre-sorted) output directly
* lang: Further extend lang-extract consistency/error checking
- Do not parse inside preprocessor conditionals
- Distinguish between references and definitions
- Warn about missing references and definitions
* lang: lang-extract: warn about incorrect PROGMEM assignments
Check that ISTR is used along with PROGMEM_I1 in an attempt to spot
useless translated catalogs.
* lang: lang-extract: Improved handling of same-line translations
Correctly reference metadata on same-line translations.
* lang: lang-extract: Handle _O as a cat-ref
https://github.com/prusa3d/Prusa-Firmware/pull/3434
* lang: lang-extract: Warn about unused catalog definitions
* lang: lang-extract: Allow propagating translation comments via //
The definition:
code //// definition [// comment]
will check [definition] as before, but blindly accumulate // comment.
The comment is then re-appended back into the PO files for translators
with the form:
definition
comment
comment...
* lang: Fix incorrect display definitions
* lang: lang-extract: Check source encoding/charmap
* lang: Translate the degree symbol
* lang: Unbreak/cleanup DEBUG_SEC_LANG
* lang: Improve meaning of comment
* lang: Split charset conversions into an aux lib for future use
* lang: Implement lang-map.py to extract the translation symbol map
- Extracts the translatable symbol map for further use
- Computes a stable "language signature" from the map itself
- Optionally patches the binary update the symbols
* lang: Check for translation recoding problems
* lang: Implement a transliteration map to post-process translations
TRANS_CHARS is now used to replace unavailable symbols to the source
encoding, only while producing the language catalog.
* lang: Handle/check character replacements in lang-check
Filter the translation through TRANS_CHARS, so that the preview and
length check are performed correctly for expanding replacements such as
'ß' to 'ss'.
* lang: Implement lang-build.py to generate the final language catalog
* Cleanup .gitignore
* lang: Drop txt language files
* lang: Remove outdated translation scripts and obsolete docs
* lang: Update build scripts for new infrastructure
* lang: [no] Integrate accents from po/new/no.po
We now support accents natively
* lang: Remove redundant directory po/new/
* lang: Fix encoding of LCD characters in PO files
* lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL
* lang: Sort and reformat PO files for further massaging
* lang: Switch to developer (dot) comments for PO metadata
* lang: Allow the IGNORE annotation to skip extraction
* lang: Fix missing/broken language metadata in sources
* lang: Add update-pot.sh and regenerate po/Firmware.pot
* lang: Add update-po.sh and refresh all PO files
* lang: Add summary documentation about the new translation workflow
* Add more ignored files
* CI: Add new required dependencies to travis
* lang: lang-build: Improve warning message
"referenced" was really meaning that data is being duplicated.
* lang: Respect the language order as defined in config.sh
This correctly splits normal and community-made entries during language
selection.
* lang: More typos in the documentation
* lang: Check for the maximum size of each language
Each table needs to fit within LANG_SIZE_RESERVED
* lang: Properly align _SEC_LANG to page boundaries
... instead of relying on _SEC_LANG_TABLE to calculate the offset
* lang: Build support for dual-language hex files
Detect the printer type by checking the current variant type.
On printers with no xflash (MK2*), generate one hex file for each
additional language file by patching the built-in secondary language
table during the build process
* lang: Mention lang-patchsec.py
* lang: Use color() instead of tput for clarity
* lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb
* lang: Consistent use of redirection in config.sh
* lang: Stricter variant-type check for xflash support
* lang: Output size stats when building double-language hex files
* lang: Respect NO_COLOR in lang-check.py
* lang: Check for repeated/incorrect annotations
Catch errors such as "c=1 c=2"
* lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations
* lang: [it] Improve MSG_*_SKEW translation
* lang: Use INTLHEX instead of OUTHEX_P/S for configuration
We already have OUTHEX which is the compiled firmware.
Use INTLHEX for the final internationalized firmware, which is less
confusing. Also, assume it being a prefix for all generated hex
files, which reduces the number of variables set.
* lang: Move lang_map to lib.io for further use
* lang: lang-check: Accept a firmware map file to suppress unused string warnings
* lang: Use the map file to reduce useless warnings during fw-build
* lang: lang-check: Also suppress unused empty annotations
* lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation
Refresh pot file
* lang: lang-check: Do not warn about same-word translations by default
Do not warn when one-word translations such as "No" result in "No" also
in other languages, since this is common in latin languages.
Allow to re-enable the warning with --warn-same
* lang: lang-build: Handle same-source/translation efficiently
* lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings
Instead of displaying a warning, supress the warning and explicitly
translate each entry using english (which is the common/acceptable
word in these cases).
* lang: [it] Suppress more warnings
* lang: lang-check: Add intermediate "suggest" warning category
Warnings in the "suggest" category as shown as [S] as based on pure
speculation from the checking tool, such as the translation being
significantly shorter than the original.
As a result, they can be suppressed with --no-suggest
* lang: Return translation status from lang-check
- 0 if the translation only contains suggestions
- 1 if the translation contains warnings or errors
Check for the exit status in fw-build.sh, but do nothing at the moment
except printing a non-fatal error.
* lang: Remove "trim_trailing_whitespace=false" for po files
PO files got cleaned up/rewritten. We can now ensure they stay
consistent.
* lang: [sv] Re-integrate changes from 70c73cb
* lang: [no] Reintegrate changes from @pkg2000
1615 lines
73 KiB
Bash
Executable File
1615 lines
73 KiB
Bash
Executable File
#!/bin/bash
|
|
# This bash script is used to compile automatically the Prusa firmware with a dedicated build environment and settings
|
|
#
|
|
# Supported OS: Windows 10, Linux64 bit
|
|
# Beta OS: Linux32 bit
|
|
#
|
|
# Linux:
|
|
#
|
|
# Windows:
|
|
# To execute this script you gonna need few things on your Windows machine
|
|
#
|
|
# Linux Subsystem Ubuntu
|
|
# 1. Follow these instructions
|
|
# 2. Open Ubuntu bash and get latest updates with 'apt-get update'
|
|
# 3. Install zip with 'apt-get install zip'
|
|
# 4. Install python3 with 'apt-get install python3'
|
|
# 5. Add command 'ln -sf /usr/bin/python3.5 /usr/bin/python' to link python3 to python.
|
|
# Do not install 'python' as python 2.x has end of life see https://pythonclock.org/
|
|
# 6. Add at top of ~/.bashrc following lines by using 'sudo nano ~/.bashrc'
|
|
#
|
|
# export OS="Linux"
|
|
# export JAVA_TOOL_OPTIONS="-Djava.net.preferIPv4Stack=true"
|
|
# export GPG_TTY=$(tty)
|
|
#
|
|
# and confirm them. Restart Ubuntu bash
|
|
#
|
|
# Or GIT-BASH
|
|
# 1. Download and install the correct (64bit or 32bit) Git version https://git-scm.com/download/win
|
|
# 2. Also follow these instructions https://gist.github.com/evanwill/0207876c3243bbb6863e65ec5dc3f058
|
|
# 3. Download and install 7z-zip from its official website.
|
|
# By default, it is installed under the directory /c/Program Files/7-Zip in Windows 10 as my case.
|
|
# 4. Run git Bash under Administrator privilege and navigate to the directory /c/Program Files/Git/mingw64/bin,
|
|
# you can run the command ln -s /c/Program Files/7-Zip/7z.exe zip.exe
|
|
#
|
|
# Useful things to edit and compare your custom Firmware
|
|
# 1. Download and install current and correct (64bit or 32bit) Notepad++ version https://notepad-plus-plus.org/download
|
|
# 2. Another great tool to compare your custom mod and stock firmware is WinMerge http://winmerge.org/downloads/?lang=en
|
|
#
|
|
# Example for MK3: open git bash and change to your Firmware directory
|
|
# <username>@<machine name> MINGW64 /<drive>/path
|
|
# bash build.sh 1_75mm_MK3-EINSy10a-E3Dv6full
|
|
#
|
|
# Example for MK25: open git bash and change to your directory
|
|
# gussner@WIN01 MINGW64 /d/Data/Prusa-Firmware/MK3
|
|
# bash build.sh 1_75mm_MK25-RAMBo13a-E3Dv6full
|
|
#
|
|
# The compiled hex files can be found in the folder above like from the example
|
|
# gussner@WIN01 MINGW64 /d/Data/Prusa-Firmware
|
|
# FW351-Build1778-1_75mm_MK25-RAMBo13a-E3Dv6full.hex
|
|
#
|
|
# Why make Arduino IDE portable?
|
|
# To have a distinguished Prusa Firmware build environment I decided to use Arduino IDE in portable mode.
|
|
# - Changes made to other Arduino instances do not change anything in this build environment.
|
|
# By default Arduino IDE uses "users" and shared library folders which is useful as soon you update the Software.
|
|
# But in this case we need a stable and defined build environment, so keep it separated it kind of important.
|
|
# Some may argue that this is only used by a script, BUT as soon someone accidentally or on purpose starts Arduino IDE
|
|
# it will use the default Arduino IDE folders and so can corrupt the build environment.
|
|
#
|
|
# Version: 2.0.0-Build_70
|
|
# Change log:
|
|
# 12 Jan 2019, 3d-gussner, Fixed "compiler.c.elf.flags=-w -Os -Wl,-u,vfprintf -lprintf_flt -lm -Wl,--gc-sections" in 'platform.txt'
|
|
# 16 Jan 2019, 3d-gussner, Build_2, Added development check to modify 'Configuration.h' to prevent unwanted LCD messages that Firmware is unknown
|
|
# 17 Jan 2019, 3d-gussner, Build_3, Check for OS Windows or Linux and use the right build environment
|
|
# 10 Feb 2019, ropaha, Pull Request, Select variant from list while using build.sh
|
|
# 10 Feb 2019, ropaha, change FW_DEV_VERSION automatically depending on FW_VERSION RC/BETA/ALPHA
|
|
# 10 Feb 2019, 3d-gussner, 1st tests with English only
|
|
# 10 Feb 2019, ropaha, added compiling of all variants and English only
|
|
# 10 Feb 2019, 3d-gussner, Set OUTPUT_FOLDER for hex files
|
|
# 11 Feb 2019, 3d-gussner/ropaha, Minor changes and fixes
|
|
# 11 Feb 2019, 3d-gussner, Ready for RC
|
|
# 12 Feb 2019, 3d-gussner, Check if wget and zip are installed. Thanks to Bernd to point it out
|
|
# 12 Feb 2019, 3d-gussner, Changed OS check to OSTYPE as it is not supported on Ubuntu
|
|
# Also added different BUILD_ENV folders depending on OS used so Windows
|
|
# Users can use git-bash AND Windows Linux Subsystems at the same time
|
|
# Cleanup compiler flags is only depends on OS version.
|
|
# 12 Feb 2019, 3d-gussner, Added additional OSTYPE check
|
|
# 15 feb 2019, 3d-gussner, Added zip files for miniRAMbo multi language hex files
|
|
# 15 Feb 2019, 3d-gussner, Added more checks if
|
|
# Compiled Hex-files
|
|
# Configuration_prusa.h
|
|
# language build files
|
|
# multi language firmware files exist and clean them up
|
|
# 15 Feb 2019, 3d-gussner, Fixed selection GOLD/UNKNOWN DEV_STATUS for ALL variants builds, so you have to choose only once
|
|
# 15 Feb 2019, 3d-gussner, Added some colored output
|
|
# 15 Feb 2019, 3d-gussner, troubleshooting and minor fixes
|
|
# 16 Feb 2019, 3d-gussner, Script can be run using arguments
|
|
# $1 = variant, example "1_75mm_MK3-EINSy10a-E3Dv6full.h" at this moment it is not possible to use ALL
|
|
# $2 = multi language OR English only [ALL/EN_ONLY]
|
|
# $3 = development status [GOLD/RC/BETA/ALPHA/DEVEL/DEBUG]
|
|
# If one argument is wrong a list of valid one will be shown
|
|
# 13 Mar 2019, 3d-gussner, MKbel updated the Linux build environment to version 1.0.2 with an Fix maximum firmware flash size.
|
|
# So did I
|
|
# 11 Jul 2019, deliopoulos,Updated to v1.0.6 as Prusa needs a new board definition for Firmware 3.8.x86_64
|
|
# - Split the Download of Windows Arduino IDE 1.8.5 and Prusa specific part
|
|
# --> less download volume needed and saves some time
|
|
#
|
|
# 13 Jul 2019, deliopoulos,Splitting of Arduino IDE and Prusa parts also for Linux64
|
|
# 13 Jul 2019, 3d-gussner, Added Linux 32-bit version (untested yet)
|
|
# MacOS could be added in future if needs
|
|
# 14 Jul 2019, 3d-gussner, Update preferences and make it really portable
|
|
# 15 Jul 2019, 3d-gussner, New PF-build-env GitHub branch
|
|
# 16 Jul 2019, 3d-gussner, New Arduino_boards GitHub fork
|
|
# 17 Jul 2019, 3d-gussner, Final tests under Windows 10 and Linux Subsystem for Windows
|
|
# 18 Jul 2019, 3d-gussner, Added python check
|
|
# 18 Jul 2019, deliopoulos, No need more for changing 'platform.txt' file as it comes with the Arduino Boards.
|
|
# 18 Jul 2019, deliopoulos, Modified 'PF_BUILD_FILE_URL' to use 'BUILD_ENV' variable
|
|
# 22 Jul 2019, 3d-gussner, Modified checks to check folder and/or installation output exists.
|
|
# 22 Jul 2019, 3d-gussner, Added check if Arduino IDE 1.8.5 boards have been updated
|
|
# 22 Jul 2019, 3d-gussner, Changed exit numbers 1-13 for prepare build env 21-28 for prepare compiling 31-36 compiling
|
|
# 22 Jul 2019, 3d-gussner, Changed BOARD_URL to DRracers repository after he pulled my PR https://github.com/DRracer/Arduino_Boards/pull/1
|
|
# 23 Jul 2019, 3d-gussner, Changed Build-env path to "PF-build-dl" as requested in PR https://github.com/prusa3d/Prusa-Firmware/pull/2028
|
|
# Changed Hex-files folder to PF-build-hex as requested in PR
|
|
# 23 Jul 2019, 3d-gussner, Added Finding OS version routine so supporting new OS should get easier
|
|
# 26 Jul 2019, 3d-gussner, Change JSON repository to prusa3d after PR https://github.com/prusa3d/Arduino_Boards/pull/1 was merged
|
|
# 23 Sep 2019, 3d-gussner, Prepare PF-build.sh for coming Prusa3d/Arduino_Boards version 1.0.2 Pull Request
|
|
# 17 Oct 2019, 3d-gussner, Changed folder and check file names to have separated build environments depending on Arduino IDE version and
|
|
# board-versions.
|
|
# 15 Dec 2019, 3d-gussner, Prepare for switch to Prusa3d/PF-build-env repository
|
|
# 15 Dec 2019, 3d-gussner, Fix Arduino user preferences for the chosen board.
|
|
# 17 Dec 2019, 3d-gussner, Fix "timer0_fract = 0" warning by using Arduino_boards v1.0.3
|
|
# 28 Apr 2020, 3d-gussner, Added RC3 detection
|
|
# 03 May 2020, deliopoulos, Accept all RCx as RC versions
|
|
# 05 May 2020, 3d-gussner, Make a copy of `not_tran.txt`and `not_used.txt` as `not_tran_$VARIANT.txt`and `not_used_$VARIANT.txt`
|
|
# After compiling All multi-language variants it makes it easier to find missing or unused translations.
|
|
# 12 May 2020, DRracer , Cleanup double MK2/s MK25/s `not_tran` and `not_used` files
|
|
# 13 May 2020, leptun , If cleanup files do not exist don't try to.
|
|
# 01 Oct 2020, 3d-gussner, Bug fix if using argument EN_ONLY. Thank to @leptun for pointing out.
|
|
# Change Build number to script commits 'git rev-list --count HEAD PF-build.sh'
|
|
# 02 Oct 2020, 3d-gussner, Add UNKNOWN as argument option
|
|
# 05 Oct 2020, 3d-gussner, Disable pause and warnings using command line with all needed arguments
|
|
# Install needed apps under linux if needed.
|
|
# Clean PF-Firmware build when changing git branch
|
|
# 02 Nov 2020, 3d-gussner, Check for "gawk" on Linux
|
|
# Add argument to change build number automatically to current commit or define own number
|
|
# Update exit numbers 1-13 for prepare build env 21-29 for prepare compiling 30-36 compiling
|
|
# 08 Jan 2021, 3d-gussner, Comment out 'sudo' auto installation
|
|
# Add '-?' '-h' help option
|
|
# 27 Jan 2021, 3d-gussner, Add `-c`, `-p` and `-n` options
|
|
# 12 Feb 2021, 3d-gussner, Add MK404-build.sh
|
|
# 13 Feb 2021, 3d-gussner, Indentations
|
|
# 13 Feb 2021, 3d-gussner, MK404 improvements like "flash" MK3, MK3S languages files to MK404 xflash.
|
|
# 27 Feb 2021, 3d-gussner, Add './lang-community.sh' and update exits
|
|
# 03 May 2021, 3d-gussner, Update exit numbers
|
|
# 01-14 prepare build env
|
|
# 21-32 prepare compiling
|
|
# 41-47 compiling
|
|
# 51-54 cleanup
|
|
# 61-62 MK404
|
|
# 03 May 2021, 3d-gussner, Update documentation and change version to v1.2.0
|
|
# 03 May 2021, 3d-gussner, Add SIM atmega404
|
|
# 17 Jun 2021, 3d-gussner, Update PF-build.sh to work after DRracer Remove FW version parsing PR
|
|
# 17 Jun 2021, 3d-gussner, Save ELF files for FW3.10.1 debugging PRs
|
|
# 17 Jun 2021, 3d-gussner, Add verbose_IDE to output more information during build
|
|
# 17 Jun 2021, 3d-gussner, Change version to v2.0.0
|
|
# 18 Jun 2021, 3d-gussner, Use atmega404 if extanded RAM or FLASH size are chosen
|
|
# 18 Jun 2021, 3d-gussner, Remove MK404 copy of lang file as it has been fixed in MK404
|
|
# 21 Jun 2021, 3d-gussner, Change atmega404 board flash argument to y
|
|
# Use newer version of MK404-build.sh instead start the program
|
|
# 22 Jun 2021, 3d-gussner, Added _RAM-<value> and _FLASH-<value> as OUTPUT_FILE_SUFFIX if someone builds an atmega404 firmware
|
|
# Added some logic if IDE 1.8.13 is used
|
|
# Added some logic if Arduino_boards 1.0.4 is used
|
|
# Fixed typo
|
|
# Restore original `Configuration.h` and `config.h` in case of cannceled script or failed compiling during next start of this script.
|
|
# use function
|
|
# 23 Jun 2021, 3d-gussner, Improve MK404 usage
|
|
# 24 Jun 2021, 3d-gussner, Fix MK404 user interaction not to show if compiling 'All' variants
|
|
# 24 Jun 2021, 3d-gussner, MK404 is only supported on Linux at this moment.
|
|
# 03 Jan 2022, 3d-gussner, Remove calling lang-community.sh as not needed anymore
|
|
# 21 Jan 2022, 3d-gussner, Sort variants
|
|
# Add Arduino 1.8.19 as an option
|
|
# 25 Jan 2022, 3d-gussner, Allow upper and lower case for MK404
|
|
# 09 Feb 2022, 3d-gussner, Add community language firmware files for MK2.5/S
|
|
# Add selection of language in MK404 for MK2.5/S
|
|
# 10 Feb 2022, 3d-gussner, Add SRCDIR for compatibility with build server
|
|
# 13 Feb 2022, leptun , Fix -o for "Restoring" messages after failure
|
|
|
|
|
|
SCRIPT_PATH="$( cd "$(dirname "$0")" ; pwd -P )"
|
|
export SRCDIR=$SCRIPT_PATH
|
|
|
|
#### Start: Failures
|
|
failures()
|
|
{
|
|
case "$1" in
|
|
0) echo "$(tput setaf 2)PF-build.sh finished with success$(tput sgr0)" ;;
|
|
1) echo "$(tput setaf 1)This script doesn't support your Operating system!$(tput sgr0)" ; exit 1 ;;
|
|
4) echo "$(tput setaf 5)Follow the instructions above $(tput sgr0)" ; exit 4 ;;
|
|
5) echo "$(tput setaf 5)Invalid argument $(tput sgr0)" ; exit 5 ;;
|
|
8) echo "$(tput setaf 5)Failed to download $(tput sgr0)" ; exit 8 ;;
|
|
9) echo "$(tput setaf 5)Failed to create folder $(tput sgr0)" ; exit 9 ;;
|
|
10) echo "$(tput setaf 5)Failed to change folder $(tput sgr0)"; exit 10 ;;
|
|
11) echo "$(tput setaf 5)Failed to unzip $(tput sgr0)" ; exit 11 ;;
|
|
12) echo "$(tput setaf 5)Failed to copy file $(tput sgr0)" ; exit 12 ;;
|
|
13) echo "$(tput setaf 5)Failed to delete $(tput sgr0)" ; exit 13 ;;
|
|
20) echo "$(tput setaf 2)Conditional stop initiated by user $(tput sgr0)" ; exit 20 ;;
|
|
21) echo "$(tput setaf 1)PF-build.sh has been interrupted/failed. $(tput setaf 6)Restoring 'Configuration.h'$(tput sgr0)" ; if [ $OUTPUT == "1" ] ; then sleep 5 ; fi ;;
|
|
22) echo "$(tput setaf 1)PF-build.sh has been interrupted/failed. $(tput setaf 6)Restoring 'config.h'$(tput sgr0)" ; if [ $OUTPUT == "1" ] ; then sleep 5 ; fi ;;
|
|
24) echo "$(tput setaf 1)PF-build.sh stopped due to compiling errors! Try to restore modified files.$(tput sgr0)"; check_script_failed_nr1 ; check_script_failed_nr2 ; cleanup_firmware ; exit 24 ;;
|
|
25) echo "$(tput setaf 1)Failed to execute $(tput sgr0)" ; exit 25 ;;
|
|
esac
|
|
}
|
|
#### End: Failures
|
|
|
|
#### Start: Check for options/flags
|
|
##check_options()
|
|
##{
|
|
while getopts b:c:d:g:h:i:j:l:m:n:o:p:v:x:y:?h flag
|
|
do
|
|
case "${flag}" in
|
|
b) build_flag=${OPTARG};;
|
|
c) clean_flag=${OPTARG};;
|
|
d) devel_flag=${OPTARG};;
|
|
g) mk404_graphics_flag=${OPTARG};;
|
|
h) help_flag=1;;
|
|
i) IDE_flag=${OPTARG};;
|
|
j) verbose_IDE_flag=${OPTARG};;
|
|
l) language_flag=${OPTARG};;
|
|
m) mk404_flag=${OPTARG};;
|
|
n) new_build_flag=${OPTARG};;
|
|
o) output_flag=${OPTARG};;
|
|
p) prusa_flag=${OPTARG};;
|
|
v) variant_flag=${OPTARG};;
|
|
x) board_mem_flag=${OPTARG};;
|
|
y) board_flash_flag=${OPTARG};;
|
|
?) help_flag=1;;
|
|
esac
|
|
done
|
|
|
|
#
|
|
# '?' 'h' argument usage and help
|
|
if [ "$help_flag" == "1" ] ; then
|
|
echo "***************************************"
|
|
echo "* PF-build.sh Version: 2.0.0-Build_70 *"
|
|
echo "***************************************"
|
|
echo "Arguments:"
|
|
echo "$(tput setaf 2)-b$(tput sgr0) Build/commit number"
|
|
echo "$(tput setaf 2)-c$(tput sgr0) Do not clean up lang build"
|
|
echo "$(tput setaf 2)-d$(tput sgr0) Devel build"
|
|
echo "$(tput setaf 2)-g$(tput sgr0) Start MK404 graphics"
|
|
echo "$(tput setaf 2)-i$(tput sgr0) Arduino IDE version"
|
|
echo "$(tput setaf 2)-j$(tput sgr0) Arduino IDE verbose output"
|
|
echo "$(tput setaf 2)-l$(tput sgr0) Languages"
|
|
echo "$(tput setaf 2)-m$(tput sgr0) Start MK404 sim"
|
|
echo "$(tput setaf 2)-n$(tput sgr0) New fresh build"
|
|
echo "$(tput setaf 2)-o$(tput sgr0) Output"
|
|
echo "$(tput setaf 2)-p$(tput sgr0) Keep Configuration_prusa.h"
|
|
echo "$(tput setaf 2)-v$(tput sgr0) Variant"
|
|
echo "$(tput setaf 2)-x$(tput sgr0) Board memory size"
|
|
echo "$(tput setaf 2)-y$(tput sgr0) Board flash size"
|
|
echo "$(tput setaf 2)-?$(tput sgr0) Help"
|
|
echo
|
|
echo "Brief USAGE:"
|
|
echo " $(tput setaf 2)./PF-build.sh$(tput sgr0) [-b] [-c] [-d] [-g] [-i] [-j] [-l] [-m] [-n] [-o] [-p ] -[v] [-x] [-y] [-h] [-?]"
|
|
echo
|
|
echo " -b : '$(tput setaf 2)Auto$(tput sgr0)' needs git or a number"
|
|
echo " -c : '$(tput setaf 2)0$(tput sgr0)' clean up, '$(tput setaf 2)1$(tput sgr0)' keep"
|
|
echo " -d : '$(tput setaf 2)GOLD$(tput sgr0)', '$(tput setaf 2)RC$(tput sgr0)', '$(tput setaf 2)BETA$(tput sgr0)', '$(tput setaf 2)ALPHA$(tput sgr0)', '$(tput setaf 2)DEBUG$(tput sgr0)', '$(tput setaf 2)DEVEL$(tput sgr0)' and '$(tput setaf 2)UNKNOWN$(tput sgr0)'"
|
|
echo " -g : '$(tput setaf 2)0$(tput sgr0)' no '$(tput setaf 2)1$(tput sgr0)' lite '$(tput setaf 2)2$(tput sgr0)' fancy '$(tput setaf 2)3$(tput sgr0)' lite with Quad_HR '$(tput setaf 2)4$(tput sgr0)' fancy with Quad_HR"
|
|
echo " -i : '$(tput setaf 2)1.8.5$(tput sgr0)', '$(tput setaf 2)1.8.13$(tput sgr0)', '$(tput setaf 2)1.8.19$(tput sgr0)'"
|
|
echo " -j : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
|
|
echo " -l : '$(tput setaf 2)ALL$(tput sgr0)' for multi language or '$(tput setaf 2)EN_ONLY$(tput sgr0)' for English only"
|
|
echo " -m : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes '$(tput setaf 2)2$(tput sgr0)' with MMU2"
|
|
echo " -n : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
|
|
echo " -o : '$(tput setaf 2)1$(tput sgr0)' force or '$(tput setaf 2)0$(tput sgr0)' block output and delays"
|
|
echo " -p : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
|
|
echo " -v : '$(tput setaf 2)All$(tput sgr0)' or variant file name"
|
|
echo " -x : '$(tput setaf 2)8$(tput sgr0)' or '$(tput setaf 2)64$(tput sgr0)' Kb."
|
|
echo " -y : '$(tput setaf 2)256$(tput sgr0)','$(tput setaf 2)384$(tput sgr0)','$(tput setaf 2)512$(tput sgr0)','$(tput setaf 2)1024$(tput sgr0)''$(tput setaf 2)32M$(tput sgr0)'"
|
|
echo
|
|
echo "Example:"
|
|
echo " $(tput setaf 2)./PF-build.sh -v All -l ALL -d GOLD$(tput sgr0)"
|
|
echo " Will build all variants as multi language and final GOLD version"
|
|
echo
|
|
echo " $(tput setaf 2) ./PF-build.sh -v 1_75mm_MK3S-EINSy10a-E3Dv6full.h -b Auto -l ALL -d GOLD -o 1 -c 1 -p 1 -n 1$(tput sgr0)"
|
|
echo " Will build MK3S multi language final GOLD firmware "
|
|
echo " with current commit count number and output extra information,"
|
|
echo " not delete lang build temporary files, keep Configuration_prusa.h and build with new fresh build folder."
|
|
echo
|
|
exit 6
|
|
fi
|
|
|
|
#Check if verbose_IDE is selected with argument '-j'
|
|
|
|
if [ ! -z "$verbose_IDE_flag" ]; then
|
|
if [ $verbose_IDE_flag == "1" ]; then
|
|
verbose_IDE="1"
|
|
elif [ $verbose_IDE_flag == "0" ]; then
|
|
verbose_IDE="0"
|
|
else
|
|
echo "Only '0' and '1' are valid verbose_IDE values."
|
|
failures 5
|
|
fi
|
|
else
|
|
verbose_IDE="0"
|
|
fi
|
|
|
|
#Check if Build is selected with argument '-f'
|
|
if [ ! -z "$board_flash_flag" ] ; then
|
|
if [ "$board_flash_flag" == "256" ] ; then
|
|
BOARD_FLASH="0x3FFFF"
|
|
BOARD_maximum_size="253952"
|
|
echo "Board flash size : $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
|
|
elif [ "$board_flash_flag" == "384" ] ; then
|
|
BOARD_FLASH="0x5FFFF"
|
|
BOARD_maximum_size="385024"
|
|
echo "Board flash size : $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
|
|
OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
|
|
|
|
elif [ "$board_flash_flag" == "512" ] ; then
|
|
BOARD_FLASH="0x7FFFF"
|
|
BOARD_maximum_size="516096"
|
|
echo "Board flash size : $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
|
|
OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
|
|
elif [ "$board_flash_flag" == "1024" ] ; then
|
|
BOARD_FLASH="0xFFFFF"
|
|
BOARD_maximum_size="1040384"
|
|
echo "Board flash size : $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
|
|
OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
|
|
elif [[ "$board_flash_flag" == "32M" || "$board_flash_flag" == "32768" ]] ; then
|
|
BOARD_FLASH="0x1FFFFFF"
|
|
BOARD_maximum_size="33546240"
|
|
echo "Board flash size : 32 Mb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
|
|
OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
|
|
else
|
|
echo "Unsupported board flash size chosen. Only '256', '384', '512', '1024' and '32M' are allowed."
|
|
failures 5
|
|
fi
|
|
fi
|
|
|
|
#Check if Build is selected with argument '-x'
|
|
if [ ! -z "$board_mem_flag" ] ; then
|
|
if [ "$board_mem_flag" == "8" ] ; then
|
|
BOARD_MEM="0x21FF"
|
|
echo "Board mem size : $board_mem_flag Kb, $BOARD_MEM (hex)"
|
|
elif [ "$board_mem_flag" == "16" ] ; then
|
|
BOARD_MEM="0x3DFF"
|
|
echo "Board mem size : $board_mem_flag Kb, $BOARD_MEM (hex)"
|
|
OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_RAM-$board_mem_flag"
|
|
elif [ "$board_mem_flag" == "32" ] ; then
|
|
BOARD_MEM="0x7DFF"
|
|
echo "Board mem size : $board_mem_flag Kb, $BOARD_MEM (hex)"
|
|
OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_RAM-$board_mem_flag"
|
|
elif [ "$board_mem_flag" == "64" ] ; then
|
|
BOARD_MEM="0xFFFF"
|
|
echo "Board mem size : $board_mem_flag Kb, $BOARD_MEM (hex)"
|
|
OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_RAM-$board_mem_flag"
|
|
else
|
|
echo "Unsupported board mem size chosen. Only '8', '64' are allowed."
|
|
failures 5
|
|
fi
|
|
fi
|
|
|
|
#Start: Check if Arduino IDE version is correct
|
|
if [ ! -z "$IDE_flag" ]; then
|
|
if [[ "$IDE_flag" == "1.8.5" || "$IDE_flag" == "1.8.13" || "$IDE_flag" == "1.8.19" ]]; then
|
|
ARDUINO_ENV="${IDE_flag}"
|
|
else
|
|
ARDUINO_ENV="1.8.5"
|
|
fi
|
|
else
|
|
ARDUINO_ENV="1.8.5"
|
|
fi
|
|
#End: Check if Arduino IDE version is correct
|
|
|
|
#Start: Check if Output is selecetd via argument '-o'
|
|
if [[ -z "$output_flag" || "$output_flag" == 1 ]] ; then
|
|
OUTPUT=1
|
|
else
|
|
OUTPUT=0
|
|
fi
|
|
#End: Check if Output is selecetd via argument '-o'
|
|
##}
|
|
#### End: Check for options/flags
|
|
|
|
#### Start: Make backup of Configuration.h
|
|
make_backup1()
|
|
{
|
|
if [ ! -f "$SCRIPT_PATH/Firmware/Configuration.tmp" ]; then
|
|
cp -f $SCRIPT_PATH/Firmware/Configuration.h $SCRIPT_PATH/Firmware/Configuration.tmp
|
|
fi
|
|
}
|
|
#### End: Make backup of Configuration.h
|
|
|
|
#### Start: Make backup of config.h
|
|
make_backup2()
|
|
{
|
|
if [ ! -f "$SCRIPT_PATH/Firmware/config.tmp" ]; then
|
|
cp -f $SCRIPT_PATH/Firmware/config.h $SCRIPT_PATH/Firmware/config.tmp
|
|
fi
|
|
}
|
|
#### End: Make backup of config.h
|
|
|
|
#### Start: Check Check if script has been canceled or failed nr1.
|
|
check_script_failed_nr1()
|
|
{
|
|
#Check for "Configuration.tmp"
|
|
if [ -f "$SCRIPT_PATH/Firmware/Configuration.tmp" ]; then
|
|
cp -f $SCRIPT_PATH/Firmware/Configuration.tmp $SCRIPT_PATH/Firmware/Configuration.h
|
|
#echo "Found Configuration.tmp restore Configuration.h"
|
|
failures 21
|
|
fi
|
|
}
|
|
#### End: Check Check if script has been canceled or failed nr1.
|
|
|
|
#### Start: Check if script has been canceled or failed nr2.
|
|
check_script_failed_nr2()
|
|
{
|
|
#Check for "config.tmp"
|
|
#echo "No config.tmp"
|
|
if [ -f "$SCRIPT_PATH/Firmware/config.tmp" ]; then
|
|
cp -f $SCRIPT_PATH/Firmware/config.tmp $SCRIPT_PATH/Firmware/config.h
|
|
#echo "Found config.tmp restore config.h"
|
|
failures 22
|
|
fi
|
|
}
|
|
#### End: Check if script has been canceled or failed nr2.
|
|
|
|
#### Start: Check if OSTYPE is supported
|
|
check_OS()
|
|
{
|
|
OS_FOUND=$( command -v uname)
|
|
|
|
case $( "${OS_FOUND}" | tr '[:upper:]' '[:lower:]') in
|
|
linux*)
|
|
TARGET_OS="linux"
|
|
;;
|
|
msys*|cygwin*|mingw*)
|
|
# or possible 'bash on windows'
|
|
TARGET_OS='windows'
|
|
;;
|
|
nt|win*)
|
|
TARGET_OS='windows'
|
|
;;
|
|
*)
|
|
TARGET_OS='unknown'
|
|
;;
|
|
esac
|
|
# Windows
|
|
if [ $TARGET_OS == "windows" ]; then
|
|
if [ $(uname -m) == "x86_64" ]; then
|
|
echo "$(tput setaf 2)Windows 64-bit found$(tput sgr0)"
|
|
Processor="64"
|
|
elif [ $(uname -m) == "i386" ]; then
|
|
echo "$(tput setaf 2)Windows 32-bit found$(tput sgr0)"
|
|
Processor="32"
|
|
else
|
|
echo "$(tput setaf 1)Unsupported OS: Windows $(uname -m)"
|
|
failures 1
|
|
fi
|
|
# Linux
|
|
elif [ $TARGET_OS == "linux" ]; then
|
|
if [ $(uname -m) == "x86_64" ]; then
|
|
echo "$(tput setaf 2)Linux 64-bit found$(tput sgr0)"
|
|
Processor="64"
|
|
elif [[ $(uname -m) == "i386" || $(uname -m) == "i686" ]]; then
|
|
echo "$(tput setaf 2)Linux 32-bit found$(tput sgr0)"
|
|
Processor="32"
|
|
else
|
|
echo "$(tput setaf 1)Unsupported OS: Linux $(uname -m)"
|
|
failures 1
|
|
fi
|
|
else
|
|
#echo "$(tput setaf 1)This script doesn't support your Operating system!"
|
|
#echo "Please use Linux 64-bit or Windows 10 64-bit with Linux subsystem / git-bash"
|
|
#echo "Read the notes of build.sh$(tput sgr0)"
|
|
failures 1
|
|
fi
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
}
|
|
#### End: Check if OSTYPE is supported
|
|
|
|
#### Start: Prepare bash environment and check if wget, zip and other needed things are available
|
|
# Start: Check wget
|
|
check_wget()
|
|
{
|
|
if ! type wget > /dev/null; then
|
|
echo "$(tput setaf 1)Missing 'wget' which is important to run this script"
|
|
echo "Please follow these instructions https://gist.github.com/evanwill/0207876c3243bbb6863e65ec5dc3f058 to install wget$(tput sgr0)"
|
|
failures 4
|
|
fi
|
|
}
|
|
# End: Check wget
|
|
|
|
# Start: Check for zip
|
|
check_zip()
|
|
{
|
|
if ! type zip > /dev/null; then
|
|
if [ $TARGET_OS == "windows" ]; then
|
|
echo "$(tput setaf 1)Missing 'zip' which is important to run this script"
|
|
echo "Download and install 7z-zip from its official website https://www.7-zip.org/"
|
|
echo "By default, it is installed under the directory /c/Program Files/7-Zip in Windows 10 as my case."
|
|
echo "Run git Bash under Administrator privilege and"
|
|
echo "navigate to the directory /c/Program Files/Git/mingw64/bin,"
|
|
echo "you can run the command $(tput setaf 2)ln -s /c/Program Files/7-Zip/7z.exe zip.exe$(tput sgr0)"
|
|
failures 4
|
|
elif [ $TARGET_OS == "linux" ]; then
|
|
echo "$(tput setaf 1)Missing 'zip' which is important to run this script"
|
|
echo "install it with the command $(tput setaf 2)'sudo apt-get install zip'$(tput sgr0)"
|
|
failures 4
|
|
fi
|
|
fi
|
|
}
|
|
# End: Check for zip
|
|
|
|
# Start: Check python ... needed during language build
|
|
check_python()
|
|
{
|
|
if ! type python > /dev/null; then
|
|
if [ $TARGET_OS == "windows" ]; then
|
|
echo "$(tput setaf 1)Missing 'python3' which is important to run this script"
|
|
failures 4
|
|
elif [ $TARGET_OS == "linux" ]; then
|
|
echo "$(tput setaf 1)Missing 'python' which is important to run this script"
|
|
echo "As Python 2.x will not be maintained from 2020 please,"
|
|
echo "install it with the command $(tput setaf 2)'sudo apt-get install python3'."
|
|
echo "Check which version of Python3 has been installed using 'ls /usr/bin/python3*'"
|
|
echo "Use 'sudo ln -sf /usr/bin/python3.x /usr/bin/python' (where 'x' is your version number) to make it default.$(tput sgr0)"
|
|
#sudo apt-get update && apt-get install python3 && ln -sf /usr/bin/python3 /usr/bin/python
|
|
failures 4
|
|
fi
|
|
fi
|
|
}
|
|
# End: Check python ... needed during language build
|
|
|
|
#Start: Check gawk ... needed during language build
|
|
check_gawk()
|
|
{
|
|
if ! type gawk > /dev/null; then
|
|
if [ $TARGET_OS == "linux" ]; then
|
|
echo "$(tput setaf 1)Missing 'gawk' which is important to run this script"
|
|
echo "install it with the command $(tput setaf 2)'sudo apt-get install gawk'."
|
|
#sudo apt-get update && apt-get install gawk
|
|
failures 4
|
|
fi
|
|
fi
|
|
}
|
|
#End: Check gawk ... needed during language build
|
|
|
|
#### Start: Set build environment
|
|
set_build_env_variables()
|
|
{
|
|
BUILD_ENV="1.0.6"
|
|
BOARD="prusa_einsy_rambo"
|
|
BOARD_PACKAGE_NAME="PrusaResearch"
|
|
if [ "$ARDUINO_ENV" == "1.8.13" ]; then
|
|
BOARD_VERSION="1.0.4"
|
|
else
|
|
BOARD_VERSION="1.0.4"
|
|
fi
|
|
#BOARD_URL="https://raw.githubusercontent.com/3d-gussner/Arduino_Boards/master/IDE_Board_Manager/package_prusa3d_index.json"
|
|
BOARD_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/master/IDE_Board_Manager/package_prusa3d_index.json"
|
|
BOARD_FILENAME="prusa3dboards"
|
|
#BOARD_FILE_URL="https://raw.githubusercontent.com/3d-gussner/Arduino_Boards/master/IDE_Board_Manager/prusa3dboards-$BOARD_VERSION.tar.bz2"
|
|
BOARD_FILE_URL="https://raw.githubusercontent.com/prusa3d/Arduino_Boards/master/IDE_Board_Manager/prusa3dboards-$BOARD_VERSION.tar.bz2"
|
|
#PF_BUILD_FILE_URL="https://github.com/3d-gussner/PF-build-env-1/releases/download/$BUILD_ENV-WinLin/PF-build-env-WinLin-$BUILD_ENV.zip"
|
|
if [[ "$BOARD_VERSION" == "1.0.3" || "$BOARD_VERSION" == "1.0.2" || "$BOARD_VERSION" == "1.0.1" ]]; then
|
|
PF_BUILD_FILE_URL="https://github.com/prusa3d/PF-build-env/releases/download/$BUILD_ENV-WinLin/PF-build-env-WinLin-$BUILD_ENV.zip"
|
|
fi
|
|
LIB="PrusaLibrary"
|
|
}
|
|
#### End: Set build environment
|
|
|
|
#### Start: List few useful data
|
|
output_useful_data()
|
|
{
|
|
echo
|
|
echo "Script path :" $SCRIPT_PATH
|
|
echo "OS :" $OS
|
|
echo "OS type :" $TARGET_OS
|
|
echo ""
|
|
echo "Arduino IDE :" $ARDUINO_ENV
|
|
echo "Build env :" $BUILD_ENV
|
|
echo "Board :" $BOARD
|
|
if [ ! -z "$BOARD_FLASH" ] ; then
|
|
echo "Board flash :" $BOARD_FLASH
|
|
fi
|
|
if [ ! -z "$BOARD_MEM" ] ; then
|
|
echo "Board mem :" $BOARD_MEM
|
|
fi
|
|
echo "Package name:" $BOARD_PACKAGE_NAME
|
|
echo "Board v. :" $BOARD_VERSION
|
|
echo "Specific Lib:" $LIB
|
|
echo ""
|
|
}
|
|
#### End: List few useful data
|
|
|
|
#### Start: Prepare building environment
|
|
|
|
# Start: Check if build exists and creates it if not
|
|
check_create_build_folders()
|
|
{
|
|
if [ ! -d "../PF-build-dl" ]; then
|
|
mkdir ../PF-build-dl || failures 9
|
|
fi
|
|
|
|
cd ../PF-build-dl || failures 10
|
|
BUILD_ENV_PATH="$( cd "$(dirname "$0")" ; pwd -P )"
|
|
|
|
# Check if PF-build-env-<version> exists and downloads + creates it if not
|
|
# The build environment is based on the supported Arduino IDE portable version with some changes
|
|
if [ ! -d "../PF-build-env-$BUILD_ENV" ]; then
|
|
echo "$(tput setaf 6)PF-build-env-$BUILD_ENV is missing ... creating it now for you$(tput sgr 0)"
|
|
mkdir ../PF-build-env-$BUILD_ENV
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
fi
|
|
}
|
|
# End: Check if build exists and creates it if not
|
|
|
|
# Start: Download and extract supported Arduino IDE depending on OS
|
|
download_prepare_arduinoIDE()
|
|
{
|
|
# Windows
|
|
if [ $TARGET_OS == "windows" ]; then
|
|
if [ ! -f "arduino-$ARDUINO_ENV-windows.zip" ]; then
|
|
echo "$(tput setaf 6)Downloading Windows 32/64-bit Arduino IDE portable...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
wget https://downloads.arduino.cc/arduino-$ARDUINO_ENV-windows.zip || failures 8
|
|
echo "$(tput sgr 0)"
|
|
fi
|
|
if [[ ! -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" && ! -e "../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
|
|
echo "$(tput setaf 6)Unzipping Windows 32/64-bit Arduino IDE portable...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
unzip arduino-$ARDUINO_ENV-windows.zip -d ../PF-build-env-$BUILD_ENV || failures 11
|
|
mv ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor
|
|
echo "# arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
|
|
echo "$(tput sgr0)"
|
|
fi
|
|
fi
|
|
# Linux
|
|
if [ $TARGET_OS == "linux" ]; then
|
|
# 32 or 64 bit version
|
|
if [ ! -f "arduino-$ARDUINO_ENV-linux$Processor.tar.xz" ]; then
|
|
echo "$(tput setaf 6)Downloading Linux $Processor Arduino IDE portable...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
wget --no-check-certificate https://downloads.arduino.cc/arduino-$ARDUINO_ENV-linux$Processor.tar.xz || failures 8
|
|
echo "$(tput sgr 0)"
|
|
fi
|
|
if [[ ! -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" && ! -e "../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
|
|
echo "$(tput setaf 6)Unzipping Linux $Processor Arduino IDE portable...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
tar -xvf arduino-$ARDUINO_ENV-linux$Processor.tar.xz -C ../PF-build-env-$BUILD_ENV/ || failures 11
|
|
mv ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor
|
|
echo "# arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/arduino-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
|
|
echo "$(tput sgr0)"
|
|
fi
|
|
fi
|
|
}
|
|
# End: Download and extract supported Arduino IDE depending on OS
|
|
|
|
# Start: Make Arduino IDE portable
|
|
portable_ArduinoIDE()
|
|
{
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/ ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/
|
|
fi
|
|
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/ ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable
|
|
fi
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/output/ ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/output
|
|
fi
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/ ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages
|
|
fi
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook/ ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook
|
|
fi
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook/libraries/ ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/sketchbook/libraries
|
|
fi
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/staging/ ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/staging
|
|
fi
|
|
}
|
|
# End: Make Arduino IDE portable
|
|
|
|
# Start: Change Arduino IDE preferences
|
|
change_ArduinoIDEpreferances()
|
|
{
|
|
if [ ! -e ../PF-build-env-$BUILD_ENV/Preferences-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt ]; then
|
|
echo "$(tput setaf 6)Setting $ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor Arduino IDE preferences for portable GUI usage...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
echo "update.check"
|
|
sed -i 's/update.check = true/update.check = false/g' ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
|
|
echo "board"
|
|
sed -i "s/board = uno/board = $BOARD/g" ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
|
|
echo "editor.linenumbers"
|
|
sed -i 's/editor.linenumbers = false/editor.linenumbers = true/g' ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
|
|
echo "boardsmanager.additional.urls"
|
|
echo "boardsmanager.additional.urls=$BOARD_URL" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
|
|
echo "build.verbose=true" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
|
|
echo "compiler.cache_core=false" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
|
|
echo "compiler.warning_level=all" >>../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/lib/preferences.txt
|
|
echo "# Preferences-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor" >> ../PF-build-env-$BUILD_ENV/Preferences-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
|
|
echo "$(tput sgr0)"
|
|
fi
|
|
}
|
|
# End: Change Arduino IDE preferences
|
|
|
|
# Start: Download and extract Prusa Firmware related parts
|
|
download_prepare_Prusa_build_files()
|
|
{
|
|
# Download and extract PrusaResearchRambo board
|
|
if [ ! -f "$BOARD_FILENAME-$BOARD_VERSION.tar.bz2" ]; then
|
|
echo "$(tput setaf 6)Downloading Prusa Research AVR MK3 RAMBo EINSy build environment...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
wget $BOARD_FILE_URL || failures 8
|
|
fi
|
|
if [[ ! -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION" || ! -e "../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]]; then
|
|
echo "$(tput setaf 6)Unzipping $BOARD_PACKAGE_NAME Arduino IDE portable...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
tar -xvf $BOARD_FILENAME-$BOARD_VERSION.tar.bz2 -C ../PF-build-env-$BUILD_ENV/ || failures 11
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME
|
|
fi
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME
|
|
fi
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware
|
|
fi
|
|
if [ ! -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr ]; then
|
|
mkdir ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr
|
|
fi
|
|
|
|
mv ../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$BOARD_VERSION ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION
|
|
echo "# $BOARD_FILENAME-$BOARD_VERSION" >> ../PF-build-env-$BUILD_ENV/$BOARD_FILENAME-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
|
|
|
|
echo "$(tput sgr 0)"
|
|
fi
|
|
|
|
# Download and extract Prusa Firmware specific library files
|
|
if [[ "$BOARD_VERSION" == "1.0.3" || "$BOARD_VERSION" == "1.0.2" || "$BOARD_VERSION" == "1.0.1" ]]; then
|
|
if [ ! -f "PF-build-env-WinLin-$BUILD_ENV.zip" ]; then
|
|
echo "$(tput setaf 6)Downloading Prusa Firmware build environment...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
wget $PF_BUILD_FILE_URL || failures 8
|
|
echo "$(tput sgr 0)"
|
|
fi
|
|
if [ ! -e "../PF-build-env-$BUILD_ENV/PF-build-env-$BUILD_ENV-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt" ]; then
|
|
echo "$(tput setaf 6)Unzipping Prusa Firmware build environment...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
unzip -o PF-build-env-WinLin-$BUILD_ENV.zip -d ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor || failures 11
|
|
echo "# PF-build-env-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor-$BUILD_ENV" >> ../PF-build-env-$BUILD_ENV/PF-build-env-$BUILD_ENV-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
|
|
echo "$(tput sgr0)"
|
|
fi
|
|
fi
|
|
}
|
|
# End: Download and extract Prusa Firmware related parts
|
|
|
|
# Start: Check if User updated Arduino IDE 1.8.5 boardsmanager and tools
|
|
check_ArduinoIDE_User_interaction()
|
|
{
|
|
if [ -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools" ]; then
|
|
echo "$(tput setaf 6)Arduino IDE boards / tools have been manually updated...$"
|
|
echo "Please don't update the 'Arduino AVR boards' as this will prevent running this script (tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
fi
|
|
if [ -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2" ]; then
|
|
echo "$(tput setaf 6)PrusaReasearch compatible tools have been manually updated...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
echo "$(tput setaf 6)Copying Prusa Firmware build environment to manually updated boards / tools...$(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
cp -f ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/hardware/tools/avr/avr/lib/ldscripts/avr6.xn ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/4.9.2-atmel3.5.4-arduino2/avr/lib/ldscripts/avr6.xn
|
|
echo "# PF-build-env-portable-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor-$BUILD_ENV" >> ../PF-build-env-$BUILD_ENV/PF-build-env-portable-$BUILD_ENV-$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor.txt
|
|
echo "$(tput sgr0)"
|
|
fi
|
|
if [ -d "../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor/portable/packages/arduino/tools/avr-gcc/5.4.0-atmel3.6.1-arduino2" ]; then
|
|
echo "$(tput setaf 1)Arduino IDE tools have been updated manually to a non supported version!!!"
|
|
echo "Delete ../PF-build-env-$BUILD_ENV and start the script again"
|
|
echo "Script will not continue until this have been fixed $(tput setaf 2)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
echo "$(tput sgr0)"
|
|
failures 4
|
|
fi
|
|
}
|
|
# End: Check if User updated Arduino IDE 1.8.5 boardsmanager and tools
|
|
#
|
|
#### End: prepare bash / Linux environment
|
|
#### End prepare building
|
|
|
|
#### Start: Getting arguments for command line compiling
|
|
get_arguments()
|
|
{
|
|
|
|
# Check if git is available
|
|
if type git > /dev/null; then
|
|
git_available="1"
|
|
fi
|
|
|
|
#
|
|
# '-v' argument defines which variant of the Prusa Firmware will be compiled
|
|
if [ -z "$variant_flag" ] ; then
|
|
# Select which variant of the Prusa Firmware will be compiled, like
|
|
PS3="Select a variant: "
|
|
while IFS= read -r -d $'\0' f; do
|
|
options[i++]="$f"
|
|
done < <(find Firmware/variants/ -maxdepth 1 -type f -name "*.h" -print0 )
|
|
IFS=$'\n' sorted=($(sort -n <<<"${options[*]}")); unset IFS
|
|
select opt in "${sorted[@]}" "All" "Quit"; do
|
|
case $opt in
|
|
*.h)
|
|
VARIANT=$(basename "$opt" ".h")
|
|
VARIANTS[i++]="$opt"
|
|
break
|
|
;;
|
|
"All")
|
|
VARIANT="All"
|
|
VARIANTS=${options[*]}
|
|
variant_flag="All"
|
|
break
|
|
;;
|
|
"Quit")
|
|
echo "You chose to stop"
|
|
failures 20
|
|
;;
|
|
*)
|
|
echo "$(tput setaf 1)This is not a valid variant$(tput sgr0)"
|
|
;;
|
|
esac
|
|
done
|
|
else
|
|
if [ -f "$SCRIPT_PATH/Firmware/variants/$variant_flag" ] ; then
|
|
VARIANTS=$variant_flag
|
|
elif [ "$variant_flag" == "All" ] ; then
|
|
while IFS= read -r -d $'\0' f; do
|
|
options[i++]="$f"
|
|
done < <(find Firmware/variants/ -maxdepth 1 -type f -name "*.h" -print0 )
|
|
VARIANT="All"
|
|
VARIANTS=${options[*]}
|
|
else
|
|
echo "$(tput setaf 1)Argument $variant_flag could not be found in Firmware/variants please choose a valid one.$(tput sgr0)"
|
|
echo "Only $(tput setaf 2)'All'$(tput sgr0) and file names below are allowed as variant '-v' argument.$(tput setaf 2)"
|
|
ls -1 $SCRIPT_PATH/Firmware/variants/*.h | xargs -n1 basename
|
|
echo "$(tput sgr0)"
|
|
failures 4
|
|
fi
|
|
fi
|
|
|
|
#'-l' argument defines if it is an English only version. Known values EN_ONLY / ALL
|
|
#Check default language mode
|
|
MULTI_LANGUAGE_CHECK=$(grep --max-count=1 "^#define LANG_MODE *" $SCRIPT_PATH/Firmware/config.h|sed -e's/ */ /g'|cut -d ' ' -f3)
|
|
|
|
if [ -z "$language_flag" ] ; then
|
|
PS3="Select a language: "
|
|
echo
|
|
echo "Which lang-build do you want?"
|
|
select yn in "Multi languages" "English only"; do
|
|
case $yn in
|
|
"Multi languages")
|
|
LANGUAGES="ALL"
|
|
break
|
|
;;
|
|
"English only")
|
|
LANGUAGES="EN_ONLY"
|
|
break
|
|
;;
|
|
*)
|
|
echo "$(tput setaf 1)This is not a valid language$(tput sgr0)"
|
|
;;
|
|
esac
|
|
done
|
|
else
|
|
if [[ "$language_flag" == "ALL" || "$language_flag" == "EN_ONLY" ]] ; then
|
|
LANGUAGES=$language_flag
|
|
else
|
|
echo "$(tput setaf 1)Language argument is wrong!$(tput sgr0)"
|
|
echo "Only $(tput setaf 2)'ALL'$(tput sgr0) or $(tput setaf 2)'EN_ONLY'$(tput sgr0) are allowed as language '-l' argument!"
|
|
failures 5
|
|
fi
|
|
fi
|
|
#Check if DEV_STATUS is selected via argument '-d'
|
|
if [ ! -z "$devel_flag" ] ; then
|
|
if [[ "$devel_flag" == "GOLD" || "$devel_flag" == "RC" || "$devel_flag" == "BETA" || "$devel_flag" == "ALPHA" || "$devel_flag" == "DEVEL" || "$devel_flag" == "DEBUG" || "$devel_flag" == "UNKNOWN" ]] ; then
|
|
DEV_STATUS_SELECTED=$devel_flag
|
|
elif [[ "$devel_flag" == "atmega404" || "$devel_flag" == "atmega404_no_bootloader" ]] ; then
|
|
MK404_DEBUG=$devel_flag
|
|
else
|
|
echo "$(tput setaf 1)Development argument is wrong!$(tput sgr0)"
|
|
echo "Only $(tput setaf 2)'GOLD', 'RC', 'BETA', 'ALPHA', 'DEVEL', 'DEBUG' or 'UNKNOWN' $(tput sgr0) are allowed as devel '-d' argument!$(tput sgr0)"
|
|
failures 5
|
|
fi
|
|
fi
|
|
|
|
#Check if Build is selected via argument '-b'
|
|
if [ ! -z "$build_flag" ] ; then
|
|
if [[ "$build_flag" == "Auto" && "$git_available" == "1" ]] ; then
|
|
echo "Build changed to $build_flag"
|
|
BUILD=$(git rev-list --count HEAD)
|
|
elif [[ $build_flag =~ ^[0-9]+$ ]] ; then
|
|
BUILD=$build_flag
|
|
else
|
|
echo "$(tput setaf 1)Build number argument is wrong!$(tput sgr0)"
|
|
echo "Only $(tput setaf 2)'Auto' (git needed) or numbers $(tput sgr0) are allowed as build '-b' argument!$(tput sgr0)"
|
|
failures 5
|
|
fi
|
|
echo "New Build number is: $BUILD"
|
|
fi
|
|
|
|
#Check git branch has changed
|
|
if [ ! -z "git_available" ]; then
|
|
BRANCH=""
|
|
CLEAN_PF_FW_BUILD=0
|
|
else
|
|
BRANCH=$(git branch --show-current)
|
|
echo "Current branch is:" $BRANCH
|
|
if [ ! -f "$SCRIPT_PATH/../PF-build.branch" ]; then
|
|
echo "$BRANCH" >| $SCRIPT_PATH/../PF-build.branch
|
|
echo "created PF-build.branch file"
|
|
else
|
|
PRE_BRANCH=$(cat "$SCRIPT_PATH/../PF-build.branch")
|
|
echo "Previous branch was:" $PRE_BRANCH
|
|
if [ ! "$BRANCH" == "$PRE_BRANCH" ] ; then
|
|
CLEAN_PF_FW_BUILD=1
|
|
echo "$BRANCH" >| $SCRIPT_PATH/../PF-build.branch
|
|
fi
|
|
fi
|
|
fi
|
|
}
|
|
#### End: Getting arguments for command line compiling
|
|
|
|
#### Start: Set needed Paths
|
|
set_paths()
|
|
{
|
|
cd ../PF-build-env-$BUILD_ENV/$ARDUINO_ENV-$BOARD_VERSION-$TARGET_OS-$Processor || failures 10
|
|
BUILD_ENV_PATH="$( pwd -P )"
|
|
|
|
cd ../..
|
|
|
|
#Checkif BUILD_PATH exists and if not creates it
|
|
if [ ! -d "Prusa-Firmware-build" ]; then
|
|
mkdir Prusa-Firmware-build || failures 9
|
|
fi
|
|
|
|
#Set the BUILD_PATH for Arduino IDE
|
|
cd Prusa-Firmware-build || failures 10
|
|
BUILD_PATH="$( pwd -P )"
|
|
}
|
|
#### End: Set needed Paths
|
|
|
|
#### Start: Check git branch has changed
|
|
check_branch_changed()
|
|
{
|
|
if [ "$CLEAN_PF_FW_BUILD" == "1" ]; then
|
|
read -t 10 -p "Branch changed, cleaning Prusa-Firmware-build folder"
|
|
rm -r *
|
|
else
|
|
echo "Nothing to clean up"
|
|
fi
|
|
}
|
|
#### End: Check git branch has changed
|
|
|
|
#### Start: Prepare code for compiling
|
|
|
|
prepare_code_for_compiling()
|
|
{
|
|
VARIANT=$(basename "$v" ".h")
|
|
MK404_PRINTER=$(grep --max-count=1 "\bPRINTER_TYPE\b" $SCRIPT_PATH/Firmware/variants/$VARIANT.h | sed -e's/ */ /g' |cut -d ' ' -f3 | cut -d '_' -f2)
|
|
# Find firmware version in Configuration.h file and use it to generate the hex filename
|
|
FW_MAJOR=$(grep --max-count=1 "\bFW_MAJOR\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d ' ' -f3)
|
|
FW_MINOR=$(grep --max-count=1 "\bFW_MINOR\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d ' ' -f3)
|
|
FW_REVISION=$(grep --max-count=1 "\bFW_REVISION\b" $SCRIPT_PATH/Firmware/Configuration.h| sed -e's/ */ /g'|cut -d ' ' -f3)
|
|
FW="$FW_MAJOR$FW_MINOR$FW_REVISION"
|
|
#FW=$(grep --max-count=1 "\bFW_VERSION\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d '"' -f2|sed 's/\.//g')
|
|
if [ -z "$BUILD" ] ; then
|
|
# Find build version in Configuration.h file and use it to generate the hex filename
|
|
BUILD=$(grep --max-count=1 "\bFW_COMMIT_NR\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d ' ' -f3)
|
|
else
|
|
# Find and replace build version in Configuration.h file
|
|
BUILD_ORG=$(grep --max-count=1 "\bFW_COMMIT_NR\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d ' ' -f3)
|
|
echo "Original build number: $BUILD_ORG"
|
|
if [ "$BUILD_ORG" != "$BUILD" ]; then
|
|
echo "New build number : $BUILD"
|
|
sed -i -- "s/^#define FW_COMMIT_NR.*/#define FW_COMMIT_NR $BUILD/g" $SCRIPT_PATH/Firmware/Configuration.h
|
|
fi
|
|
fi
|
|
# Check if the motherboard is an EINSY and if so only one hex file will generated
|
|
MOTHERBOARD=$(grep --max-count=1 "\bMOTHERBOARD\b" $SCRIPT_PATH/Firmware/variants/$VARIANT.h | sed -e's/ */ /g' |cut -d ' ' -f3)
|
|
# Check development status
|
|
FW_FLAV=$(grep --max-count=1 "//#define FW_FLAVOR\b" $SCRIPT_PATH/Firmware/Configuration.h|cut -d ' ' -f1)
|
|
if [[ "$FW_FLAV" != "//#define" ]] ; then
|
|
FW_FLAVOR=$(grep --max-count=1 "\bFW_FLAVOR\b" $SCRIPT_PATH/Firmware/Configuration.h| sed -e's/ */ /g'|cut -d ' ' -f3)
|
|
FW_FLAVERSION=$(grep --max-count=1 "\bFW_FLAVERSION\b" $SCRIPT_PATH/Firmware/Configuration.h| sed -e's/ */ /g'|cut -d ' ' -f3)
|
|
if [[ "$FW_FLAVOR" != "//#define FW_FLAVOR" ]] ; then
|
|
FW="$FW-$FW_FLAVOR"
|
|
DEV_CHECK="$FW_FLAVOR"
|
|
if [ ! -z "$FW_FLAVERSION" ] ; then
|
|
FW="$FW$FW_FLAVERSION"
|
|
fi
|
|
fi
|
|
fi
|
|
DEV_CHECK=$(grep --max-count=1 "\bFW_VERSION\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d '"' -f2|sed 's/\.//g'|cut -d '-' -f2)
|
|
if [ -z "$DEV_STATUS_SELECTED" ] ; then
|
|
if [[ "$DEV_CHECK" == *"RC"* ]] ; then
|
|
DEV_STATUS="RC"
|
|
elif [[ "$DEV_CHECK" == *"ALPHA"* ]]; then
|
|
DEV_STATUS="ALPHA"
|
|
elif [[ "$DEV_CHECK" == *"BETA"* ]]; then
|
|
DEV_STATUS="BETA"
|
|
elif [[ "$DEV_CHECK" == "DEVEL" ]]; then
|
|
DEV_STATUS="DEVEL"
|
|
elif [[ "$DEV_CHECK" == "DEBUG" ]]; then
|
|
DEV_STATUS="DEBUG"
|
|
else
|
|
DEV_STATUS="UNKNOWN"
|
|
echo
|
|
echo "$(tput setaf 5)DEV_STATUS is UNKNOWN. Do you wish to set DEV_STATUS to GOLD?$(tput sgr0)"
|
|
PS3="Select YES only if source code is tested and trusted: "
|
|
select yn in "Yes" "No"; do
|
|
case $yn in
|
|
Yes)
|
|
DEV_STATUS="GOLD"
|
|
DEV_STATUS_SELECTED="GOLD"
|
|
break
|
|
;;
|
|
No)
|
|
DEV_STATUS="UNKNOWN"
|
|
DEV_STATUS_SELECTED="UNKNOWN"
|
|
break
|
|
;;
|
|
*)
|
|
echo "$(tput setaf 1)This is not a valid DEV_STATUS$(tput sgr0)"
|
|
;;
|
|
esac
|
|
done
|
|
fi
|
|
else
|
|
DEV_STATUS=$DEV_STATUS_SELECTED
|
|
fi
|
|
}
|
|
#### End: Prepare code for compiling
|
|
|
|
prepare_hex_folders()
|
|
{
|
|
if [ ! -d "$SCRIPT_PATH/../PF-build-hex/FW$FW-Build$BUILD/$MOTHERBOARD" ]; then
|
|
mkdir -p $SCRIPT_PATH/../PF-build-hex/FW$FW-Build$BUILD/$MOTHERBOARD || failures 9
|
|
fi
|
|
OUTPUT_FOLDER="PF-build-hex/FW$FW-Build$BUILD/$MOTHERBOARD"
|
|
if [ "$BOARD" != "prusa_einsy_rambo" ]; then
|
|
if [ ! -d "$SCRIPT_PATH/../PF-build-hex/FW$FW-Build$BUILD/$BOARD" ]; then
|
|
mkdir -p $SCRIPT_PATH/../PF-build-hex/FW$FW-Build$BUILD/$BOARD || failures 9
|
|
fi
|
|
OUTPUT_FOLDER="PF-build-hex/FW$FW-Build$BUILD/$BOARD"
|
|
fi
|
|
|
|
#Define OUTPUT_FILENAME
|
|
OUTPUT_FILENAME=FW$FW-Build$BUILD-$VARIANT
|
|
#Check for OUTPUT_FILENAME_SUFFIX and add it
|
|
if [ ! -z $OUTPUT_FILENAME_SUFFIX ]; then
|
|
OUTPUT_FILENAME="${OUTPUT_FILENAME}$OUTPUT_FILENAME_SUFFIX"
|
|
fi
|
|
|
|
#Check if exactly the same hexfile already exists
|
|
if [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.hex" && "$LANGUAGES" == "ALL" ]]; then
|
|
echo ""
|
|
ls -1 $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.hex | xargs -n1 basename
|
|
echo "$(tput setaf 6)This hex file to be compiled already exists! To cancel this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
read -t 10 -p "Press Enter to continue..."
|
|
fi
|
|
elif [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.hex" && "$LANGUAGES" == "EN_ONLY" ]]; then
|
|
echo ""
|
|
ls -1 $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.hex | xargs -n1 basename
|
|
echo "$(tput setaf 6)This hex file to be compiled already exists! To cancel this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
read -t 10 -p "Press Enter to continue..."
|
|
fi
|
|
fi
|
|
if [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.zip" && "$LANGUAGES" == "ALL" ]]; then
|
|
echo ""
|
|
ls -1 $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.zip | xargs -n1 basename
|
|
echo "$(tput setaf 6)This zip file to be compiled already exists! To cancel this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
read -t 10 -p "Press Enter to continue..."
|
|
fi
|
|
fi
|
|
}
|
|
#### End: Prepare hex files folder
|
|
|
|
#### Start: List usefull data
|
|
list_usefull_data()
|
|
{
|
|
echo "$(tput setaf 2)$(tput setab 7) "
|
|
echo "Printer :" $MK404_PRINTER
|
|
echo "Variant :" $VARIANT
|
|
echo "Firmware :" $FW
|
|
echo "Build # :" $BUILD
|
|
echo "Dev Check :" $DEV_CHECK
|
|
echo "DEV Status :" $DEV_STATUS
|
|
echo "Motherboard :" $MOTHERBOARD
|
|
echo "Board flash :" $BOARD_FLASH
|
|
echo "Board mem :" $BOARD_MEM
|
|
echo "Languages :" $LANGUAGES
|
|
echo "Hex-file Folder:" $OUTPUT_FOLDER
|
|
echo "Hex filename :" $OUTPUT_FILENAME
|
|
echo "$(tput sgr0)"
|
|
|
|
}
|
|
#### End: List usefull data
|
|
|
|
#### Start: Prepare Firmware to be compiled
|
|
prepare_variant_for_compiling()
|
|
{
|
|
# Copy variant as Configuration_prusa.h
|
|
if [ ! -f "$SCRIPT_PATH/Firmware/Configuration_prusa.h" ]; then
|
|
cp -f $SCRIPT_PATH/Firmware/variants/$VARIANT.h $SCRIPT_PATH/Firmware/Configuration_prusa.h || failures 12
|
|
else
|
|
echo "$(tput setaf 6)Configuration_prusa.h already exist it will be overwritten in 10 seconds by the chosen variant.$(tput sgr 0)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
read -t 10 -p "Press Enter to continue..."
|
|
fi
|
|
cp -f $SCRIPT_PATH/Firmware/variants/$VARIANT.h $SCRIPT_PATH/Firmware/Configuration_prusa.h || failures 12
|
|
fi
|
|
|
|
#Prepare Configuration.h to use the correct FW_DEV_VERSION to prevent LCD messages when connecting with OctoPrint
|
|
sed -i -- "s/#define FW_DEV_VERSION FW_VERSION_UNKNOWN/#define FW_DEV_VERSION FW_VERSION_$DEV_STATUS/g" $SCRIPT_PATH/Firmware/Configuration.h
|
|
|
|
# set FW_REPOSITORY
|
|
sed -i -- 's/#define FW_REPOSITORY "Unknown"/#define FW_REPOSITORY "Prusa3d"/g' $SCRIPT_PATH/Firmware/Configuration.h
|
|
|
|
#Prepare English only or multi-language version to be build
|
|
if [ $LANGUAGES == "EN_ONLY" ]; then
|
|
echo " "
|
|
echo "English only language firmware will be built"
|
|
sed -i -- "s/^#define LANG_MODE *1/#define LANG_MODE 0/g" $SCRIPT_PATH/Firmware/config.h
|
|
echo " "
|
|
else
|
|
echo " "
|
|
echo "Multi-language firmware will be built"
|
|
sed -i -- "s/^#define LANG_MODE *0/#define LANG_MODE 1/g" $SCRIPT_PATH/Firmware/config.h
|
|
echo " "
|
|
fi
|
|
|
|
#Check if compiler flags are set to Prusa specific needs for the rambo board.
|
|
#if [ $TARGET_OS == "windows" ]; then
|
|
#RAMBO_PLATFORM_FILE="PrusaResearchRambo/avr/platform.txt"
|
|
#fi
|
|
|
|
#New fresh PF-Firmware-build
|
|
if [ "$new_build_flag" == "1" ]; then
|
|
rm -r -f $BUILD_PATH/* || failures 13
|
|
fi
|
|
|
|
}
|
|
#### End: Prepare Firmware to be compiled
|
|
#### End of Prepare building
|
|
|
|
#### Start: Compiling EN Prusa Firmware
|
|
compile_en_firmware()
|
|
{
|
|
## Check board mem size
|
|
CURRENT_BOARD_MEM=$(grep "#define RAMEND" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h | sed -e's/.* //g'|cut -d ' ' -f3|tr -d $'\n')
|
|
if [ $CURRENT_BOARD_MEM != "0x21FF" ] ; then
|
|
echo "Board mem has been already modified or not reset"
|
|
echo "Current:" $CURRENT_BOARD_MEM
|
|
PS3="Select $(tput setaf 2)Yes$(tput sgr 0) if you want to reset it."
|
|
select yn in "Yes" "No"; do
|
|
case $yn in
|
|
Yes)
|
|
echo "Resetting board mem size"
|
|
sed -i -- "s/^#define RAMEND .*$/#define RAMEND 0x21FF/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
|
|
break
|
|
;;
|
|
*)
|
|
echo "Continuing with modified mem size"
|
|
break
|
|
;;
|
|
esac
|
|
done
|
|
fi
|
|
## Modify board mem size
|
|
if [[ ! -z $BOARD_MEM && "$BOARD_MEM" != "0x21FF" ]] ; then
|
|
echo "$(tput setaf 3)Modifying board memory size (hex):$(tput sgr 0)"
|
|
echo "Old:" $CURRENT_BOARD_MEM
|
|
echo "New:" $BOARD_MEM
|
|
read -t 5 -p "To cancel press $(tput setaf 1)CRTL+C$(tput sgr 0)"
|
|
echo ""
|
|
sed -i -- "s/^#define RAMEND 0x21FF/#define RAMEND ${BOARD_MEM}/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
|
|
fi
|
|
|
|
## Check board flash size
|
|
CURRENT_BOARD_FLASH=$(grep "#define FLASHEND" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h | sed -e's/.* //g'|cut -d ' ' -f3|tr -d $'\n')
|
|
CURRENT_BOARD_maximum_size=$(grep "prusa_einsy_rambo.upload.maximum_size" $BUILD_ENV_PATH/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION/boards.txt |cut -d '=' -f2|tr -d $'\n')
|
|
if [[ $CURRENT_BOARD_FLASH != "0x3FFFF" || $CURRENT_BOARD_maximum_size != "253952" ]] ; then
|
|
echo "Board flash has been already modified or not reset"
|
|
echo "Current flash size:" $CURRENT_BOARD_FLASH
|
|
echo "Current max. size:" $CURRENT_BOARD_maximum_size
|
|
PS3="Select $(tput setaf 2)Yes$(tput sgr 0) if you want to reset it."
|
|
select yn in "Yes" "No"; do
|
|
case $yn in
|
|
Yes)
|
|
echo "$(tput setaf 1)Resetting board flash size$(tput sgr 0)"
|
|
sed -i -- "s/^#define FLASHEND .*$/#define FLASHEND 0x3FFFF/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
|
|
sed -i -- "s/^prusa_einsy_rambo.upload.maximum_size.*/prusa_einsy_rambo.upload.maximum_size=253952/g" $BUILD_ENV_PATH/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION/boards.txt
|
|
break
|
|
;;
|
|
*)
|
|
echo "$(tput setaf 3)Continuing with modified flash size$(tput sgr 0)"
|
|
break
|
|
;;
|
|
esac
|
|
done
|
|
fi
|
|
## Modify boad flash size
|
|
if [[ ! -z $BOARD_FLASH && "$BOARD_FLASH" != "0x3FFFF" ]] ; then
|
|
echo "Modifying board flash size (hex):"
|
|
echo "Old flash size:" $CURRENT_BOARD_FLASH
|
|
echo "New flash size:" $BOARD_FLASH
|
|
echo "Old max. size:" $CURRENT_BOARD_maximum_size
|
|
echo "New max. size:" $BOARD_maximum_size
|
|
read -t 5 -p "To cancel press $(tput setaf 1)CRTL+C$(tput sgr 0)"
|
|
sed -i -- "s/^#define FLASHEND .*/#define FLASHEND ${BOARD_FLASH}/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
|
|
sed -i -- "s/^prusa_einsy_rambo.upload.maximum_size.*/prusa_einsy_rambo.upload.maximum_size=${BOARD_maximum_size}/g" $BUILD_ENV_PATH/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION/boards.txt
|
|
fi
|
|
|
|
#Check if compiler flags are set to Prusa specific needs for the rambo board.
|
|
# if [ $TARGET_OS == "windows" ]; then
|
|
# RAMBO_PLATFORM_FILE="PrusaResearchRambo/avr/platform.txt"
|
|
# fi
|
|
|
|
#### End of Prepare building
|
|
|
|
#### Start building
|
|
|
|
export ARDUINO=$BUILD_ENV_PATH
|
|
#echo $BUILD_ENV_PATH
|
|
#export BUILDER=$ARDUINO/arduino-builder
|
|
|
|
echo
|
|
#read -t 5 -p "Press Enter..."
|
|
echo
|
|
|
|
echo "Start to build Prusa Firmware ..."
|
|
echo "Using variant $VARIANT$(tput setaf 3)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
|
|
if [ $verbose_IDE == "1" ]; then
|
|
$BUILD_ENV_PATH/arduino-builder -dump-prefs -debug-level 10 -compile -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=$BOARD_PACKAGE_NAME:avr:$BOARD -build-path=$BUILD_PATH -warnings=all $SCRIPT_PATH/Firmware/Firmware.ino || failures 24
|
|
fi
|
|
$BUILD_ENV_PATH/arduino-builder -compile -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=$BOARD_PACKAGE_NAME:avr:$BOARD -build-path=$BUILD_PATH -warnings=all -verbose=$verbose_IDE $SCRIPT_PATH/Firmware/Firmware.ino || failures 24
|
|
}
|
|
#### End: Compiling EN Prusa Firmware
|
|
|
|
#### Start: Create and save Multi Language Prusa Firmware
|
|
create_multi_firmware()
|
|
{
|
|
#if [ $LANGUAGES == "ALL" ]; then
|
|
echo "$(tput setaf 2)"
|
|
|
|
echo "Building multi language firmware" $MULTI_LANGUAGE_CHECK
|
|
echo "$(tput sgr 0)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
cd $SCRIPT_PATH/lang
|
|
echo "$(tput setaf 3)"
|
|
./config.sh || failures 25
|
|
echo "$(tput sgr 0)"
|
|
# Check if previous languages and firmware build exist and if so clean them up
|
|
if [ -f "lang_en.tmp" ]; then
|
|
echo ""
|
|
echo "$(tput setaf 6)Previous lang build files already exist these will be cleaned up in 10 seconds.$(tput sgr 0)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
read -t 10 -p "Press Enter to continue..."
|
|
fi
|
|
echo "$(tput setaf 3)"
|
|
./lang-clean.sh
|
|
echo "$(tput sgr 0)"
|
|
fi
|
|
if [ -f "progmem.out" ]; then
|
|
echo ""
|
|
echo "$(tput setaf 6)Previous firmware build files already exist these will be cleaned up in 10 seconds.$(tput sgr 0)"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
read -t 10 -p "Press Enter to continue..."
|
|
fi
|
|
echo "$(tput setaf 3)"
|
|
./fw-clean.sh
|
|
echo "$(tput sgr 0)"
|
|
fi
|
|
# Combine compiled firmware with languages
|
|
echo "$(tput setaf 3)"
|
|
./fw-build.sh || failures 25
|
|
echo "$(tput sgr 0)"
|
|
# Check if the motherboard is an EINSY and if so only one hex file will generated
|
|
MOTHERBOARD=$(grep --max-count=1 "\bMOTHERBOARD\b" $SCRIPT_PATH/Firmware/variants/$VARIANT.h | sed -e's/ */ /g' |cut -d ' ' -f3)
|
|
# If the motherboard is an EINSY just copy one hexfile
|
|
if [ "$MOTHERBOARD" = "BOARD_EINSY_1_0a" ]; then
|
|
echo "$(tput setaf 2)Copying multi language firmware for MK3/Einsy board to PF-build-hex folder$(tput sgr 0)"
|
|
# End of "lang.bin" for MK3 and MK3S copy
|
|
cp -f Firmware-intl.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.hex
|
|
cp -f $BUILD_PATH/Firmware.ino.elf $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.elf
|
|
else
|
|
#Search for created firmware languages
|
|
langs=$(find firmware_*.hex | cut -d "_" -f2 | cut -d "." -f1)
|
|
#Copy found firmware_*.hex files
|
|
for la in $langs; do
|
|
cp -f firmware_$la.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-$la.hex
|
|
done
|
|
cp -f $BUILD_PATH/Firmware.ino.elf $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.elf
|
|
echo "$(tput setaf 2)Zip multi language firmware for MK2.5/miniRAMbo board to PF-build-hex folder$(tput sgr 0)"
|
|
if [ $TARGET_OS == "windows" ]; then
|
|
zip a $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.zip $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-??.hex
|
|
#rm $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-??.hex
|
|
elif [ $TARGET_OS == "linux" ]; then
|
|
# Make a copy for MK404 sim of MK2, MK2.5, MK2.5S firmware
|
|
if [ ! -z "$mk404_flag" ]; then
|
|
cp -f firmware_de.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.hex
|
|
fi
|
|
# End of MK2, MK2.5, MK2.5S firmware copy
|
|
zip -j ../../$OUTPUT_FOLDER/$OUTPUT_FILENAME.zip ../../$OUTPUT_FOLDER/$OUTPUT_FILENAME-??.hex
|
|
fi
|
|
fi
|
|
|
|
# Cleanup after build
|
|
if [[ -z "$clean_flag" || "$clean_flag" == "0" ]]; then
|
|
echo "$(tput setaf 3)"
|
|
./fw-clean.sh || failures 25
|
|
echo "$(tput sgr 0)"
|
|
fi
|
|
}
|
|
#### End: Create and save Multi Language Prusa Firmware
|
|
|
|
#### Start: Save EN_ONLY language Prusa Firmware
|
|
save_en_firmware()
|
|
{
|
|
#else
|
|
echo "$(tput setaf 2)Copying English only firmware to PF-build-hex folder$(tput sgr 0)"
|
|
cp -f $BUILD_PATH/Firmware.ino.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.hex || failures 12
|
|
echo "$(tput setaf 2)Copying English only elf file to PF-build-hex folder$(tput sgr 0)"
|
|
cp -f $BUILD_PATH/Firmware.ino.elf $SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.elf || failures 12
|
|
#fi
|
|
}
|
|
#### End: Save EN_ONLY language Prusa Firmware
|
|
|
|
#### Start: Cleanup Firmware
|
|
cleanup_firmware()
|
|
{
|
|
if [[ -z "$prusa_flag" || "$prusa_flag" == "0" ]]; then
|
|
rm $SCRIPT_PATH/Firmware/Configuration_prusa.h || failures 13
|
|
fi
|
|
# Delete dupblicates
|
|
if find $SCRIPT_PATH/lang/ -name '*RAMBo10a*.txt' -printf 1 -quit | grep -q 1
|
|
then
|
|
rm $SCRIPT_PATH/lang/*RAMBo10a*.txt || failures 13
|
|
fi
|
|
# MK2 not supported in this branch
|
|
if find $SCRIPT_PATH/lang/ -name '*MK2-RAMBo13a*' -printf 1 -quit | grep -q 1
|
|
then
|
|
rm $SCRIPT_PATH/lang/*MK2-RAMBo13a*.txt || failures 13
|
|
fi
|
|
if find $SCRIPT_PATH/lang/ -name 'not_tran.txt' -printf 1 -quit | grep -q 1
|
|
then
|
|
rm $SCRIPT_PATH/lang/not_tran.txt || failures 13
|
|
fi
|
|
if find $SCRIPT_PATH/lang/ -name 'not_used.txt' -printf 1 -quit | grep -q 1
|
|
then
|
|
rm $SCRIPT_PATH/lang/not_used.txt || failures 13
|
|
fi
|
|
|
|
#New fresh PF-Firmware-build
|
|
if [ "$new_build_flag" == "1" ]; then
|
|
rm -r -f $BUILD_PATH/* || failures 13
|
|
fi
|
|
|
|
# Restore files to previous state
|
|
sed -i -- "s/^#define FW_DEV_VERSION FW_VERSION_$DEV_STATUS/#define FW_DEV_VERSION FW_VERSION_UNKNOWN/g" $SCRIPT_PATH/Firmware/Configuration.h
|
|
sed -i -- 's/^#define FW_REPOSITORY "Prusa3d"/#define FW_REPOSITORY "Unknown"/g' $SCRIPT_PATH/Firmware/Configuration.h
|
|
if [ ! -z "$BUILD_ORG" ] ; then
|
|
sed -i -- "s/^#define FW_COMMIT_NR.*/#define FW_COMMIT_NR $BUILD_ORG/g" $SCRIPT_PATH/Firmware/Configuration.h
|
|
fi
|
|
echo $MULTI_LANGUAGE_CHECK
|
|
#sed -i -- "s/^#define LANG_MODE * /#define LANG_MODE $MULTI_LANGUAGE_CHECK/g" $SCRIPT_PATH/Firmware/config.h
|
|
sed -i -- "s/^#define LANG_MODE *1/#define LANG_MODE ${MULTI_LANGUAGE_CHECK}/g" $SCRIPT_PATH/Firmware/config.h
|
|
sed -i -- "s/^#define LANG_MODE *0/#define LANG_MODE ${MULTI_LANGUAGE_CHECK}/g" $SCRIPT_PATH/Firmware/config.h
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
#Check for "Configuration.tmp" and delete it
|
|
if [ -e "$SCRIPT_PATH/Firmware/Configuration.tmp" ]; then
|
|
rm $SCRIPT_PATH/Firmware/Configuration.tmp
|
|
fi
|
|
#Check for "config.tmp" and delete it
|
|
if [ -e "$SCRIPT_PATH/Firmware/config.tmp" ]; then
|
|
rm $SCRIPT_PATH/Firmware/config.tmp
|
|
fi
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
|
|
# Restore build env files to previous state
|
|
sed -i -- "s/^#define FLASHEND .*$/#define FLASHEND 0x3FFFF/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
|
|
sed -i -- "s/^prusa_einsy_rambo.upload.maximum_size.*/prusa_einsy_rambo.upload.maximum_size=253952/g" $BUILD_ENV_PATH/portable/packages/$BOARD_PACKAGE_NAME/hardware/avr/$BOARD_VERSION/boards.txt
|
|
sed -i -- "s/^#define RAMEND.*/#define RAMEND 0x21FF/g" $BUILD_ENV_PATH/hardware/tools/avr/avr/include/avr/iom2560.h
|
|
|
|
}
|
|
#### End: Prepare code for compiling
|
|
#done
|
|
|
|
#### Start: Finish script
|
|
# List hex path and list build files
|
|
finish_pf-build()
|
|
{
|
|
cd $SCRIPT_PATH
|
|
cd ..
|
|
echo "$(tput setaf 2) "
|
|
echo " "
|
|
failures 0
|
|
echo "Build done, please use Slic3rPE > 1.41.0 to upload the firmware"
|
|
echo "more information how to flash firmware https://www.prusa3d.com/drivers/ $(tput sgr 0)"
|
|
echo
|
|
echo "Files:"
|
|
ls -r -h $SCRIPT_PATH/../PF-build-hex/FW$FW-Build$BUILD/*
|
|
}
|
|
#### End: Finish script
|
|
#### End: building
|
|
|
|
|
|
####Start: MK404 Simulator
|
|
MK404_SIM()
|
|
{
|
|
cd $SCRIPT_PATH
|
|
# Check/compile MK404 sim
|
|
if [[ "$output_flag" == "1" || -z "$output_flag" ]]; then
|
|
if [[ -z "$mk404_flag" && "$variant_flag" != "All" ]]; then
|
|
echo
|
|
read -t 10 -n 1 -p "Do you want to start MK404? Y/$(tput setaf 2)n$(tput sgr 0)" mk404_start
|
|
if [[ "$mk404_start" == "Y" || "$mk404_start" == "y" ]]; then
|
|
echo
|
|
read -t 10 -n 1 -p "Do you want to start MK404 with or without MMU2S? $(tput setaf 2)1$(tput sgr 0)/2" mk404_choose1
|
|
if [ "$mk404_choose1" == "1" ]; then
|
|
mk404_flag=1
|
|
elif [ "$mk404_choose1" == "2" ]; then
|
|
mk404_flag=2
|
|
else
|
|
mk404_flag=1 #default
|
|
fi
|
|
echo
|
|
echo "Choose MK404 graphics"
|
|
echo "0 = no graphics"
|
|
echo "1 = lite"
|
|
echo "2 = fancy"
|
|
echo "3 = lite with Quad_HR"
|
|
echo "4 = fancy lite with Quad_HR"
|
|
read -t 10 -n 1 -p "Which one do you want? $(tput setaf 2)0$(tput sgr 0)/1/2/3/4" mk404_choose2
|
|
if [ "$mk404_choose2" == "1" ]; then
|
|
mk404_graphics_flag=1
|
|
elif [ "$mk404_choose2" == "2" ]; then
|
|
mk404_graphics_flag=2
|
|
elif [ "$mk404_choose2" == "3" ]; then
|
|
mk404_graphics_flag=3
|
|
elif [ "$mk404_choose2" == "4" ]; then
|
|
mk404_graphics_flag=4
|
|
elif [ "$mk404_choose2" == "0" ]; then
|
|
mk404_graphics_flag=""
|
|
else
|
|
mk404_graphics_flag="" #default
|
|
fi
|
|
fi
|
|
echo
|
|
fi
|
|
fi
|
|
|
|
# For MMU2S
|
|
if [[ "$mk404_flag" == "2" || "$mk404_flag" == "MMU2" || "$mk404_flag" == "MMU2S" ]]; then # Check if MMU2 is selected only for MK3/S
|
|
mk404_flag=2
|
|
fi
|
|
|
|
if [[ ! -z "$mk404_flag" && "$variant_flag" != "All " ]]; then
|
|
|
|
# Run MK404 with 'debugcore' and/or 'bootloader-file'
|
|
if [ ! -z "$board_mem_flag" ]; then
|
|
MK404_options="-x $board_mem_flag"
|
|
fi
|
|
if [ ! -z "$board_flash_flag" ]; then
|
|
MK404_options="${MK404_options} -y $board_flash_flag"
|
|
fi
|
|
|
|
# Run MK404 with graphics
|
|
if [ ! -z "$mk404_graphics_flag" ]; then
|
|
if [[ "$mk404_graphics_flag" == "1" || "$mk404_graphics_flag" == "2" || "$mk404_graphics_flag" == "3" || "$mk404_graphics_flag" == "4" ]]; then
|
|
MK404_options="${MK404_options} -g $mk404_graphics_flag"
|
|
else
|
|
echo "$(tput setaf 1)Unsupported MK404 graphics option $mk404_graphics_flag$(tput sgr 0)"
|
|
fi
|
|
fi
|
|
|
|
# Output some useful data
|
|
echo "Printer: $MK404_PRINTER"
|
|
echo "Options: $MK404_options"
|
|
echo ""
|
|
#read -t 5 -p "Press $(tput setaf 2)Enter$(tput sgr 0) to start MK404"
|
|
echo ""
|
|
|
|
# Change to MK404 build folder
|
|
#cd ../MK404/master/build
|
|
|
|
|
|
#Decide which hex file to use EN_ONLY or Multi language
|
|
if [ "$LANGUAGES" == "ALL" ]; then
|
|
if [[ "$MK404_PRINTER" == "MK3" || "$MK404_PRINTER" == "MK3S" ]]; then
|
|
MK404_firmware_file=$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME.hex
|
|
else
|
|
PS3="Select a language:"
|
|
select lan in ${langs[@]}
|
|
do
|
|
MK404_firmware_file=$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-$lan.hex
|
|
break
|
|
done
|
|
fi
|
|
else
|
|
MK404_firmware_file=$SCRIPT_PATH/../$OUTPUT_FOLDER/$OUTPUT_FILENAME-EN_ONLY.hex
|
|
fi
|
|
|
|
# Start MK404
|
|
# default with serial output and terminal to manipulate it via terminal
|
|
#echo ""
|
|
#echo "./MK404 Prusa_$MK404_PRINTER -s --terminal $MK404_options -f $MK404_firmware_file"
|
|
#sleep 5
|
|
#./MK404 Prusa_$MK404_PRINTER -s --terminal $MK404_options -f $MK404_firmware_file || exit 62
|
|
echo ""
|
|
echo "./MK404-build.sh -m $mk404_flag -p $MK404_PRINTER $MK404_options -f $MK404_firmware_file"
|
|
if [ $OUTPUT == "1" ] ; then
|
|
sleep 2
|
|
fi
|
|
./MK404-build.sh -m $mk404_flag -p $MK404_PRINTER $MK404_options -f $MK404_firmware_file|| failures 25
|
|
fi
|
|
}
|
|
#### End: MK404 Simulator
|
|
|
|
|
|
#### Check OS and needed apps
|
|
echo "Check OS"
|
|
check_OS
|
|
check_wget
|
|
check_zip
|
|
check_python
|
|
check_gawk
|
|
|
|
#### Check for options/flags
|
|
echo "Check for options"
|
|
|
|
#### Prepare build environment
|
|
echo "Prepare build env"
|
|
get_arguments
|
|
set_build_env_variables
|
|
output_useful_data
|
|
check_create_build_folders
|
|
|
|
#### Download/set needed apps and dependencies
|
|
download_prepare_arduinoIDE
|
|
portable_ArduinoIDE
|
|
change_ArduinoIDEpreferances
|
|
download_prepare_Prusa_build_files
|
|
check_ArduinoIDE_User_interaction
|
|
|
|
#### Start
|
|
set_paths
|
|
check_branch_changed
|
|
|
|
for v in ${VARIANTS[*]}
|
|
do
|
|
check_script_failed_nr1
|
|
check_script_failed_nr2
|
|
make_backup1
|
|
make_backup2
|
|
prepare_code_for_compiling
|
|
prepare_hex_folders
|
|
list_usefull_data
|
|
prepare_variant_for_compiling
|
|
compile_en_firmware
|
|
if [ $LANGUAGES == "ALL" ]; then
|
|
create_multi_firmware
|
|
else
|
|
save_en_firmware
|
|
fi
|
|
cleanup_firmware
|
|
done
|
|
finish_pf-build
|
|
if [ $TARGET_OS == "linux" ]; then
|
|
MK404_SIM
|
|
fi
|