3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
15d76a7501
Prusa-Firmware/Firmware
History
D.R.racer 15d76a7501 Remove duplicit incrementation of consecutive comment lines 
It was left in the code in one of the refactoring/optimization passes.
It really didn't do any harm, but was limiting the performance of the
skipping algorithm.

+ some verification code added - will be removed after successful tests
2021-02-02 07:57:06 +01:00
..
variants Merge pull request #2951 from DRracer/pvb-08 2021-01-26 12:09:41 +01:00
adc.c Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
adc.h Fix ADC index overflow 2018-07-17 17:55:04 +02:00
AutoDeplete.cpp Comment. 2019-01-04 19:56:15 +01:00
AutoDeplete.h Add filament auto deplete engine for multi-material prints with MMUv2. 2019-01-03 22:58:25 +01:00
backlight.cpp Add newline at the end of file 2020-09-15 14:56:41 +02:00
backlight.h General fixes and improvements to code 2019-10-31 19:07:20 +02:00
BlinkM.cpp
BlinkM.h
boards.h
bootapp.c Reboot after factory reset 2020-08-12 12:46:35 +03:00
bootapp.h New lang, arduino 1.8.5 - boot_app debug output 2018-10-18 16:20:14 +02:00
cardreader.cpp Separate reading G-code files and writing to a file 2021-01-28 09:37:58 +01:00
cardreader.h Separate reading G-code files and writing to a file 2021-01-28 09:37:58 +01:00
cmdqueue.cpp Fix handling EOF 2021-01-29 08:29:51 +01:00
cmdqueue.h Marlin_main.cpp hacks 2021-01-22 17:15:36 +01:00
config.h Merge pull request #2520 from MRprusa3d/PFW-x001bPR 2020-03-26 17:36:18 +01:00
Configuration_adv.h Remove defines 2021-01-22 12:26:29 +01:00
Configuration.cpp some improvements 2019-07-10 16:29:40 +02:00
Configuration.h Merge pull request #2875 from wavexx/raise_while_preheating 2021-01-11 07:45:54 +01:00
ConfigurationStore.cpp Fixup prefix echomagic for the LA config report 2019-05-24 17:08:32 +02:00
ConfigurationStore.h Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S 2019-03-19 21:39:59 +00:00
conv2str.cpp LCD menu optimalization - conversion functions - source separation 2018-07-16 17:23:35 +02:00
conv2str.h LCD menu optimalization - conversion functions - source separation 2018-07-16 17:23:35 +02:00
Dcodes.cpp Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
Dcodes.h Bugfix for last PR 2020-04-07 11:22:48 +02:00
doxyfile Updated doxygen docs to work better with confluence. 2019-07-19 13:51:55 +02:00
eeprom.cpp Set default SuperPINDA toggle on MK2.5/S to NO 2020-12-23 20:59:33 +01:00
eeprom.h Add PVB preheat and 0.8mm nozzle presets 2021-01-08 13:52:39 +01:00
fastio.h Remove io_atmega2560.h and some more macros 2020-09-11 17:43:38 +03:00
Firmware.ino LCD menu optimalization - LiquidCrystal_Prusa removed 2018-07-16 23:23:15 +02:00
first_lay_cal.cpp Gracefully dump the queue + fixes to fancheck 2020-11-09 21:49:56 +02:00
first_lay_cal.h Rename lay1cal_preheat() to lay1cal_wait_preheat(). 2019-09-12 00:19:20 +02:00
fsensor.cpp Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
fsensor.h MK3s IR sensor improvement (#2698) 2020-06-03 16:14:56 +02:00
heatbed_pwm.cpp Remove io_atmega2560.h and some more macros 2020-09-11 17:43:38 +03:00
la10compat.cpp Re-adjust LA10->15 conversion 2020-09-07 21:44:34 +02:00
la10compat.h Adjust E-jerk in LA10 compatibility mode 2020-02-03 15:42:27 +01:00
language.c Macros initial 2020-09-11 16:12:49 +03:00
language.h Macros initial 2020-09-11 16:12:49 +03:00
lcd.cpp Add lcd_putc_at (code down >150B), refactor lcd_selftest_screen_step 2021-01-25 14:58:57 +01:00
lcd.h Add lcd_putc_at (code down >150B), refactor lcd_selftest_screen_step 2021-01-25 14:58:57 +01:00
le.sh make all shell scripts executable 2018-12-10 07:09:03 -07:00
macros.h More macros 2020-09-11 18:48:44 +03:00
Marlin_main.cpp Separate reading G-code files and writing to a file 2021-01-28 09:37:58 +01:00
Marlin.h Gcode M123 only if FANCHECK and TACHOs are defined 2021-01-19 09:01:46 +01:00
MarlinSerial.cpp Merge pull request #2982 from DRracer/codesize 2021-01-26 12:04:39 +01:00
MarlinSerial.h More than 7.5KB saved by slight refactoring of printing to serial line 2019-07-12 10:10:56 +02:00
menu.cpp Save ~100B on menu implementation 2021-01-26 09:29:17 +01:00
menu.h Save ~100B on menu implementation 2021-01-26 09:29:17 +01:00
mesh_bed_calibration.cpp Remove degree char 2021-01-12 00:28:46 +01:00
mesh_bed_calibration.h Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update 2019-03-14 01:52:44 +01:00
mesh_bed_leveling.cpp 7x7 points mesh bed leveling 2019-02-14 10:57:58 +02:00
mesh_bed_leveling.h
messages.c Remove duplicate string G-code sliced for a different printer type. Please re-slice the model again. Print cancelled. using MSG_GCODE_DIFF_PRINTER_CANCELLED 2021-01-26 11:01:50 +01:00
messages.h Remove duplicate string G-code sliced for a different printer type. Please re-slice the model again. Print cancelled. using MSG_GCODE_DIFF_PRINTER_CANCELLED 2021-01-26 11:01:50 +01:00
mmu.cpp Refactor lcd_set_cursor + lcd_puts_P -> lcd_puts_at_P 2021-01-22 18:34:47 +01:00
mmu.h Show FINDA state as N/A if last received response is older than 1s. 2019-10-31 17:45:22 +01:00
motion_control.cpp
motion_control.h
optiboot_w25x20cl.cpp Handle second serial port correctly 2020-05-27 17:40:14 +03:00
optiboot_w25x20cl.h Fix missing start on MK3/S 2020-05-27 09:44:28 +03:00
pat9125.c Return correct status from pat9125_update_bs 2020-02-06 16:39:08 +01:00
pat9125.h FS: Improve reliability on speeds with poor optical tracking 2020-02-06 15:27:22 +01:00
pins_Einsy_1_0.h Remove io_atmega2560.h and some more macros 2020-09-11 17:43:38 +03:00
pins_Rambo_1_0.h MK2.5 IR_SENSOR_PIN modified 2019-02-11 14:32:21 +01:00
pins_Rambo_1_3.h debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified 2019-03-06 19:56:48 +01:00
pins.h Fix compiler warnings macro redefined. 2019-03-05 15:56:20 +01:00
planner.cpp Merge pull request #2792 from wavexx/MK3_fix_high_speed_deceleration 2020-08-06 13:27:52 +02:00
planner.h Also convert acceleration_rate to uint32_t 2020-08-03 19:01:38 +02:00
printers.h Remove commented out defines. 2019-07-10 17:40:33 +02:00
qr_solve.cpp
qr_solve.h
rbuf.c T-codes for MMU_V2: initial version 2018-07-09 13:57:36 +02:00
rbuf.h T-codes for MMU_V2: initial version 2018-07-09 13:57:36 +02:00
Sd2Card.cpp Update reference URL 2020-03-15 19:04:02 +09:00
Sd2Card.h Fix for Toshiba FlashAir (or other) SD card initialization - add clock cycles between sending CMD0 and CMD8. Redone for MK3 branch) 2019-08-08 15:45:59 -04:00
Sd2PinMap.h
SdBaseFile.cpp Return SdBaseFile into previous state 2021-01-28 09:41:30 +01:00
SdBaseFile.h Remove temporary changes from SdBaseFile.h 2021-01-28 09:42:50 +01:00
SdFatConfig.h
SdFatStructs.h
SdFatUtil.cpp Fix compiler warning: sketch/SdFatUtil.cpp:49:7: warning: unused variable 'i' [-Wunused-variable] 2018-07-25 15:19:10 +02:00
SdFatUtil.h
SdFile.cpp Remove duplicit incrementation of consecutive comment lines 2021-02-02 07:57:06 +01:00
SdFile.h Fix handling EOF 2021-01-29 08:29:51 +01:00
SdInfo.h
SdVolume.cpp
SdVolume.h Extract gcode filter from SdBaseFile into SdFile + optimization 2021-01-27 09:33:28 +01:00
Servo.cpp
Servo.h
sm4.c Merge branch 'MK3' into PFW-1186 2021-01-22 12:46:25 +01:00
sm4.h Fix sm4.h line ending 2021-01-22 18:57:24 +02:00
sound.cpp General fixes and improvements to code 2019-10-31 19:07:20 +02:00
sound.h Toggle Sound 2019-08-31 16:56:14 +03:00
speed_lookuptable.cpp Move speed lookup defs into a separate source 2019-05-24 17:08:32 +02:00
speed_lookuptable.h Add reference C implementations for MultiU16X8toH16/MultiU24X24toH16 2020-08-03 19:03:13 +02:00
spi.c New SPI (do not use Arduino SPI class) 2018-03-29 17:42:41 +02:00
spi.h New ML support - W25X20CL external spi flash support 2018-06-08 00:20:28 +02:00
static_assert.h static_assert - portable solution compatible with C++98 2018-09-27 19:59:29 +02:00
stepper.cpp Merge pull request #2792 from wavexx/MK3_fix_high_speed_deceleration 2020-08-06 13:27:52 +02:00
stepper.h Move reset LA state from G80 to M84 2020-04-29 22:51:23 +02:00
stk500.h Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
swi2c.c Remove io_atmega2560.h and some more macros 2020-09-11 17:43:38 +03:00
swi2c.h SWI2C for PAT9125 simplified/optimized 2018-07-12 17:55:38 +02:00
swspi.cpp
swspi.h
system_timer.h ALTFAN implementation (#2692) 2020-06-01 17:58:15 +02:00
temperature.cpp Add gcode M123 Tachometer value 2021-01-10 15:15:44 +01:00
temperature.h ALTFAN override 2020-07-20 19:35:25 +03:00
thermistortables.h Implement MIN/MAX AMBIENT safety checks 2020-08-01 17:38:10 +02:00
timer02.c Remove io_atmega2560.h and some more macros 2020-09-11 17:43:38 +03:00
timer02.h Re-enable Tone 2019-07-30 16:05:40 +03:00
Timer.cpp Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2. 2019-01-28 19:29:31 +01:00
Timer.h Code refactoring 2021-01-20 11:46:25 +01:00
TimerRemaining.h Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2. 2019-01-28 19:29:31 +01:00
tmc2130.cpp Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
tmc2130.h Fix compiler warnings 2019-07-16 17:31:56 +02:00
tone04.c Macros initial 2020-09-11 16:12:49 +03:00
tone04.h ALTFAN implementation (#2692) 2020-06-01 17:58:15 +02:00
uart2.c Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
uart2.h MMU - communication, check after start, code cleaning 2018-08-07 20:37:59 +02:00
ultralcd.cpp Separate reading G-code files and writing to a file 2021-01-28 09:37:58 +01:00
ultralcd.h Merge pull request #2977 from DRracer/farm-patch1 2021-01-25 11:15:44 +01:00
uni_avr_rpi.h Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"" 2018-07-23 13:35:38 +02:00
util.cpp Remove duplicate string G-code sliced for a different printer type. Please re-slice the model again. Print cancelled. using MSG_GCODE_DIFF_PRINTER_CANCELLED 2021-01-26 11:01:50 +01:00
util.h Add PVB preheat and 0.8mm nozzle presets 2021-01-08 13:52:39 +01:00
vector_3.cpp
vector_3.h
w25x20cl.c Remove io_atmega2560.h and some more macros 2020-09-11 17:43:38 +03:00
w25x20cl.h Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
xyzcal.cpp Remove unused vars in xyzcal.cpp 2021-01-22 17:50:08 +01:00
xyzcal.h New XYZ calibration algorithm 2020-12-17 18:19:36 +01:00