373 lines
23 KiB
C
373 lines
23 KiB
C
|
|
/**
|
|
* @file
|
|
*/
|
|
/** \ingroup eeprom_table */
|
|
//! _This is a EEPROM table of currently implemented in Prusa firmware (dynamically generated from doxygen)._
|
|
|
|
|
|
#ifndef EEPROM_H
|
|
#define EEPROM_H
|
|
|
|
#include <stdint.h>
|
|
|
|
#define MAX_SHEETS 8
|
|
#define MAX_SHEET_NAME_LENGTH 7
|
|
|
|
typedef struct
|
|
{
|
|
char name[MAX_SHEET_NAME_LENGTH]; //!< Can be null terminated, doesn't need to be null terminated
|
|
int16_t z_offset; //!< Z_BABYSTEP_MIN .. Z_BABYSTEP_MAX = Z_BABYSTEP_MIN*2/1000 [mm] .. Z_BABYSTEP_MAX*2/1000 [mm]
|
|
uint8_t bed_temp; //!< 0 .. 254 [°C]
|
|
uint8_t pinda_temp; //!< 0 .. 254 [°C]
|
|
} Sheet;
|
|
|
|
typedef struct
|
|
{
|
|
Sheet s[MAX_SHEETS];
|
|
uint8_t active_sheet;
|
|
} Sheets;
|
|
// sizeof(Sheets). Do not change it unless EEPROM_Sheets_base is last item in EEPROM.
|
|
// Otherwise it would move following items.
|
|
#define EEPROM_SHEETS_SIZEOF 89
|
|
|
|
#ifdef __cplusplus
|
|
static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEPROM_SHEETS_SIZEOF.");
|
|
#endif
|
|
/** @defgroup eeprom_table EEPROM Table
|
|
*
|
|
|
|
---------------------------------------------------------------------------------
|
|
EEPROM 8-bit Empty value = 0xFFh 255
|
|
|
|
EEPROM 16-bit Empty value = 0xFFFFh 65535
|
|
|
|
---------------------------------------------------------------------------------
|
|
How can you use the debug codes?
|
|
- Serial terminal like Putty.
|
|
- Octoprint does support D-codes
|
|
- _Pronterface_ does <b>not</b> support D-codes
|
|
|
|
|
|
---------------------------------------------------------------------------------
|
|
|
|
<table>
|
|
<caption id="multi_row">EEPROM Table</caption>
|
|
<tr> <th>Adress begin <th>Bit/Type <th>Name <th>Valid values <th>Default/FactoryReset<th>Description <th>Debug code
|
|
<tr><td rowspan="3">0x0FFFh 4095<td rowspan="3">uchar<td rowspan="3">EEPROM_SILENT <td>00h 0 <td rowspan="3">??? <td>TMC Stealth mode off / miniRambo Power mode <td rowspan="3">D3 Ax0fff C1
|
|
<tr> <td>01h 1 <td>TMC Stealth mode on / miniRambo Silent mode
|
|
<tr> <td>02h 2 <td>Auto mode
|
|
<tr><td rowspan="2">0x0FFEh 4094<td rowspan="2">uchar<td rowspan="2">EEPROM_LANG <td>00h 0 <td rowspan="2">00h 0 <td>English / LANG_ID_PRI <td rowspan="2">D3 Ax0ffe C1
|
|
<tr> <td>01h 1 <td>Other language LANG_ID_SEC
|
|
<tr><td rowspan="1">0x0FFCh 4092 <td>uint16 <td>EEPROM_BABYSTEP_X <td>??? <td>ffh 255 <td>Babystep for X axis _unsued_ <td>D3 Ax0ffc C2
|
|
<tr><td rowspan="1">0x0FFAh 4090 <td>uint16 <td>EEPROM_BABYSTEP_Y <td>??? <td>ffh 222 <td>Babystep for Y axis _unsued_ <td>D3 Ax0ffa C2
|
|
<tr><td rowspan="2">0x0FF8h 4088<td rowspan="2">uint16<td rowspan="2">EEPROM_BABYSTEP_Z <td rowspan="2">??? <td rowspan="2">ffh 255 <td>Babystep for Z axis _lagacy_ <td rowspan="2">D3 Ax0ff8 C2
|
|
<tr> <td>multiple values stored now in EEPROM_Sheets_base
|
|
<tr><td rowspan="6">0x0FF7h 4087<td rowspan="6">uint8<td rowspan="6">EEPROM_CALIBRATION_STATUS <td>00h 0 <td rowspan="6">ffh 255 <td>Unknown <td rowspan="6">D3 Ax0ff7 C1
|
|
<tr> <td>01h 1 <td>Calibrated
|
|
<tr> <td>E6h 230 <td>needs Live Z adjustment
|
|
<tr> <td>F0h 240 <td>needs Z calibration
|
|
<tr> <td>FAh 250 <td>needs XYZ calibration
|
|
<tr> <td>FFh 255 <td>Assbemled _default_
|
|
<tr><td rowspan="1">0x0FF5h 4085 <td>uint16 <td>EEPROM_BABYSTEP_Z0 <td>??? <td>??? <td>Babystep for Z ??? <td>D3 Ax0ff5 C2
|
|
<tr><td rowspan="1">0x0FF1h 4081 <td>uint32 <td>EEPROM_FILAMENTUSED <td>??? <td>00h 0 <td>Filament used in meters <td>D3 Ax0ff1 C4
|
|
<tr><td rowspan="1">0x0FEDh 4077 <td>uint32 <td>EEPROM_TOTALTIME <td>??? <td>00h 0 <td>Total print time <td>D3 Ax0fed C4
|
|
<tr><td rowspan="2">0x0FE5h 4069<td rowspan="2">float<td rowspan="2">EEPROM_BED_CALIBRATION_CENTER <td rowspan="2">??? <td rowspan="2">??? <td>??? <td rowspan="2">D3 Ax0fe5 C8
|
|
<tr> <td>???
|
|
<tr><td rowspan="2">0x0FDDh 4061<td rowspan="2">float<td rowspan="2">EEPROM_BED_CALIBRATION_VEC_X <td rowspan="2">??? <td rowspan="2">??? <td>??? <td rowspan="2">D3 Ax0fdd C8
|
|
<tr> <td>???
|
|
<tr><td rowspan="2">0x0FD5h 4053<td rowspan="2">float<td rowspan="2">EEPROM_BED_CALIBRATION_VEC_Y <td rowspan="2">??? <td rowspan="2">??? <td>??? <td rowspan="2">D3 Ax0fd5 C8
|
|
<tr> <td>???
|
|
<tr><td rowspan="8">0x0FC5h 4037<td rowspan="8">int16<td rowspan="8">EEPROM_BED_CALIBRATION_Z_JITTER<td rowspan="8">??? <td rowspan="8">??? <td>??? <td rowspan="8">D3 Ax0fc5 C16
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr><td rowspan="2">0x0FC4h 4036<td rowspan="2">bool<td rowspan="2">EEPROM_FARM_MODE <td>00h 0 <td rowspan="2">00h 0 <td>Prusa farm mode off <td rowspan="2">D3 Ax0fc4 C1
|
|
<tr> <td>ffh 255 <td>Prusa farm mode on
|
|
<tr><td rowspan="1">0x0FC1h 4033 <td>int16 <td>EEPROM_FARM_NUMBER <td>??? <td>ff ff ffh <td>Prusa farm number <td>D3 Ax0fc1 C3
|
|
<tr><td rowspan="2">0x0FC0h 4032<td rowspan="2">bool<td rowspan="2">EEPROM_BED_CORRECTION_VALID <td>00h 0 <td rowspan="2">00h 0 <td>Bed correction invalid <td rowspan="2">D3 Ax0fc0 C1
|
|
<tr> <td>ffh 255 <td>Bed correction valid
|
|
<tr><td rowspan="2">0x0FBFh 4031<td rowspan="2">char<td rowspan="2">EEPROM_BED_CORRECTION_LEFT <td rowspan="2">00h FFh <td rowspan="2">00h 0 <td>Bed manual correction left <td rowspan="2">D3 Ax0fbf C1
|
|
<tr> <td>At this moment limited to +-100um
|
|
<tr><td rowspan="2">0x0FBEh 4030<td rowspan="2">char<td rowspan="2">EEPROM_BED_CORRECTION_RIGHT <td rowspan="2">00h FFh <td rowspan="2">00h 0 <td>Bed manual correction right <td rowspan="2">D3 Ax0fbe C1
|
|
<tr> <td>At this moment limited to +-100um
|
|
<tr><td rowspan="2">0x0FBDh 4029<td rowspan="2">char<td rowspan="2">EEPROM_BED_CORRECTION_FRONT <td rowspan="2">00h FFh <td rowspan="2">00h 0 <td>Bed manual correction front <td rowspan="2">D3 Ax0fbd C1
|
|
<tr> <td>At this moment limited to +-100um
|
|
<tr><td rowspan="2">0x0FBCh 4028<td rowspan="2">char<td rowspan="2">EEPROM_BED_CORRECTION_BACK <td rowspan="2">00h FFh <td rowspan="2">00h 0 <td>Bed manual correction back <td rowspan="2">D3 Ax0fbc C1
|
|
<tr> <td>At this moment limited to +-100um
|
|
<tr><td rowspan="2">0x0FBBh 4027<td rowspan="2">bool<td rowspan="2">EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY <td>00h 0 <td rowspan="2">00h 0 <td>Toshiba Air off <td rowspan="2">D3 Ax0fbb C1
|
|
<tr> <td>ffh 255 <td>Toshiba Air oon
|
|
<tr><td rowspan="1">0x0FBAh 4026 <td>uchar <td>EEPROM_PRINT_FLAG <td>??? <td>??? <td>_unsued_ <td>D3 Ax0fba C1
|
|
<tr><td rowspan="5">0x0FB0h 4016<td rowspan="5">int16<td rowspan="5">EEPROM_PROBE_TEMP_SHIFT <td rowspan="5">??? <td rowspan="5">??? <td>??? <td rowspan="5">D3 Ax0fb0 C10
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr><td rowspan="2">0x0FAFh 4015<td rowspan="2">bool<td rowspan="2">EEPROM_TEMP_CAL_ACTIVE <td>00h 0 <td rowspan="2">00h 0 <td>PINDA Temp cal. inactive <td rowspan="2">D3 Ax0faf C1
|
|
<tr> <td>FFh 255 <td>PINDA Temp cal. active
|
|
<tr><td rowspan="2">0x0FA7h 4007<td rowspan="2">uint32<td rowspan="2">EEPROM_BOWDEN_LENGTH <td rowspan="2">??? <td>ff 00 ff ffh <td rowspan="2">Bowden length <td rowspan="2">D3 Ax0fae C8
|
|
<tr> <td>ff ff ff ffh
|
|
<tr><td rowspan="2">0x0FA6h 4006<td rowspan="2">uint8<td rowspan="2">EEPROM_CALIBRATION_STATUS_PINDA <td>00h 0 <td rowspan="2">ffh 255 <td>PINDA Temp not calibrated <td rowspan="2">D3 Ax0fa6 C1
|
|
<tr> <td>01h 1 <td>PINDA Temp calibrated
|
|
<tr><td rowspan="3">0x0FA5h 4005<td rowspan="3">uint8<td rowspan="3">EEPROM_UVLO <td>00h 0 <td rowspan="3">ffh 255 <td>Power Panic flag inactive <td rowspan="3">D3 Ax0fa5 C1
|
|
<tr> <td>01h 1 <td>Power Panic flag active
|
|
<tr> <td>02h 2 <td>Power Panic flag ???
|
|
<tr><td rowspan="2">0x0F9Dh 3997<td rowspan="2">float<td rowspan="2">EEPROM_UVLO_CURRENT_POSITION <td>??? <td rowspan="2">ffh 255 <td rowspan="2">Power Panic position <td rowspan="2">D3 Ax0f9d C8
|
|
<tr> <td>???
|
|
<tr><td rowspan="8">0x0F95h 3989<td rowspan="8">char<td rowspan="8">EEPROM_FILENAME <td>??? <td rowspan="8">ffh 255 <td rowspan="8">Power Panic Filename <td rowspan="8">D3 Ax0f95 C8
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>???
|
|
<tr> <td>0x0F91h 39851 <td>unit32 <td>EEPROM_FILE_POSITION <td>??? <td>ff ff ff ffh <td>Power Panic File Postion <td>D3 Ax0f91 C4
|
|
<tr> <td>0x0F8Dh 3981 <td>float <td>EEPROM_UVLO_CURRENT_POSITION_Z <td>??? <td>ff ff ff ffh <td>Power Panic Z Position <td>D3 Ax0f8d C4
|
|
<tr><td rowspan="1">0x0F8Ch 3980<td rowspan="1">???<td rowspan="1">EEPROM_UVLO_UNUSED_001 <td>??? <td rowspan="1">ffh 255 <td rowspan="1">Power Panic UNUSED <td rowspan="1">D3 Ax0f8c C1
|
|
<tr><td rowspan="1">0x0F8Bh 3979<td rowspan="1">uint8<td rowspan="1">EEPROM_UVLO_TARGET_BED <td>??? <td rowspan="1">ffh 255 <td>Power Panic Bed temperature <td rowspan="1">D3 Ax0f8b C1
|
|
<tr><td rowspan="1">0x0F89h 3977<td rowspan="1">uint16<td rowspan="1">EEPROM_UVLO_FEEDRATE <td>??? <td rowspan="1">ff ffh 65535 <td>Power Panic Feedrate <td rowspan="1">D3 Ax0f89 C2
|
|
<tr><td rowspan="1">0x0F88h 3976<td rowspan="1">uint8<td rowspan="1">EEPROM_UVLO_FAN_SPEED <td>??? <td rowspan="1">ffh 255 <td>Power Panic Fan speed <td rowspan="1">D3 Ax0f88 C1
|
|
<tr><td rowspan="2">0x0F87h 3975<td rowspan="2">uint8<td rowspan="2">EEPROM_FAN_CHECK_ENABLED <td>00h 0 <td> <td>Fan Check disabled <td rowspan="2">D3 Ax0f87 C1
|
|
<tr> <td>01h 1 <td>ffh 255 <td>Fan Check enabled (exception ffh=01h)
|
|
|
|
|
|
</table>
|
|
*/
|
|
|
|
#define EEPROM_EMPTY_VALUE 0xFF
|
|
#define EEPROM_EMPTY_VALUE16 0xFFFF
|
|
// The total size of the EEPROM is
|
|
// 4096 for the Atmega2560
|
|
#define EEPROM_TOP 4096
|
|
#define EEPROM_SILENT 4095
|
|
#define EEPROM_LANG 4094
|
|
#define EEPROM_BABYSTEP_X 4092 //unused
|
|
#define EEPROM_BABYSTEP_Y 4090 //unused
|
|
#define EEPROM_BABYSTEP_Z 4088 //legacy, multiple values stored now in EEPROM_Sheets_base
|
|
#define EEPROM_CALIBRATION_STATUS 4087
|
|
#define EEPROM_BABYSTEP_Z0 4085
|
|
#define EEPROM_FILAMENTUSED 4081
|
|
// uint32_t
|
|
#define EEPROM_TOTALTIME 4077
|
|
|
|
#define EEPROM_BED_CALIBRATION_CENTER (EEPROM_TOTALTIME-2*4)
|
|
#define EEPROM_BED_CALIBRATION_VEC_X (EEPROM_BED_CALIBRATION_CENTER-2*4)
|
|
#define EEPROM_BED_CALIBRATION_VEC_Y (EEPROM_BED_CALIBRATION_VEC_X-2*4)
|
|
|
|
// Offsets of the Z heiths of the calibration points from the first point.
|
|
// The offsets are saved as 16bit signed int, scaled to tenths of microns.
|
|
#define EEPROM_BED_CALIBRATION_Z_JITTER (EEPROM_BED_CALIBRATION_VEC_Y-2*8)
|
|
#define EEPROM_FARM_MODE (EEPROM_BED_CALIBRATION_Z_JITTER-1)
|
|
#define EEPROM_FARM_NUMBER (EEPROM_FARM_MODE-3)
|
|
|
|
// Correction of the bed leveling, in micrometers.
|
|
// Maximum 50 micrometers allowed.
|
|
// Bed correction is valid if set to 1. If set to zero or 255, the successive 4 bytes are invalid.
|
|
#define EEPROM_BED_CORRECTION_VALID (EEPROM_FARM_NUMBER-1)
|
|
#define EEPROM_BED_CORRECTION_LEFT (EEPROM_BED_CORRECTION_VALID-1)
|
|
#define EEPROM_BED_CORRECTION_RIGHT (EEPROM_BED_CORRECTION_LEFT-1)
|
|
#define EEPROM_BED_CORRECTION_FRONT (EEPROM_BED_CORRECTION_RIGHT-1)
|
|
#define EEPROM_BED_CORRECTION_REAR (EEPROM_BED_CORRECTION_FRONT-1)
|
|
#define EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY (EEPROM_BED_CORRECTION_REAR-1)
|
|
#define EEPROM_PRINT_FLAG (EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY-1)
|
|
#define EEPROM_PROBE_TEMP_SHIFT (EEPROM_PRINT_FLAG - 2*5) //5 x int for storing pinda probe temp shift relative to 50 C; unit: motor steps
|
|
#define EEPROM_TEMP_CAL_ACTIVE (EEPROM_PROBE_TEMP_SHIFT - 1)
|
|
#define EEPROM_BOWDEN_LENGTH (EEPROM_TEMP_CAL_ACTIVE - 2*4) //4 x int for bowden lengths for multimaterial
|
|
#define EEPROM_CALIBRATION_STATUS_PINDA (EEPROM_BOWDEN_LENGTH - 1) //0 - not calibrated; 1 - calibrated
|
|
#define EEPROM_UVLO (EEPROM_CALIBRATION_STATUS_PINDA - 1) //1 - uvlo during print
|
|
#define EEPROM_UVLO_CURRENT_POSITION (EEPROM_UVLO-2*4) // 2 x float for current_position in X and Y axes
|
|
#define EEPROM_FILENAME (EEPROM_UVLO_CURRENT_POSITION - 8) //8chars to store filename without extension
|
|
#define EEPROM_FILE_POSITION (EEPROM_FILENAME - 4) //32 bit for uint32_t file position
|
|
#define EEPROM_UVLO_CURRENT_POSITION_Z (EEPROM_FILE_POSITION - 4) //float for current position in Z
|
|
#define EEPROM_UVLO_UNUSED_001 (EEPROM_UVLO_CURRENT_POSITION_Z - 1) // uint8_t (unused)
|
|
#define EEPROM_UVLO_TARGET_BED (EEPROM_UVLO_UNUSED_001 - 1)
|
|
#define EEPROM_UVLO_FEEDRATE (EEPROM_UVLO_TARGET_BED - 2) //uint16_t
|
|
#define EEPROM_UVLO_FAN_SPEED (EEPROM_UVLO_FEEDRATE - 1)
|
|
#define EEPROM_FAN_CHECK_ENABLED (EEPROM_UVLO_FAN_SPEED - 1)
|
|
#define EEPROM_UVLO_MESH_BED_LEVELING (EEPROM_FAN_CHECK_ENABLED - 9*2)
|
|
|
|
#define EEPROM_UVLO_Z_MICROSTEPS (EEPROM_UVLO_MESH_BED_LEVELING - 2) // uint16_t (could be removed)
|
|
#define EEPROM_UVLO_E_ABS (EEPROM_UVLO_Z_MICROSTEPS - 1)
|
|
#define EEPROM_UVLO_CURRENT_POSITION_E (EEPROM_UVLO_E_ABS - 4) //float for current position in E
|
|
|
|
// Crash detection mode EEPROM setting
|
|
#define EEPROM_CRASH_DET (EEPROM_UVLO_CURRENT_POSITION_E - 5) // float (orig EEPROM_UVLO_MESH_BED_LEVELING-12)
|
|
// Crash detection counter Y (last print)
|
|
#define EEPROM_CRASH_COUNT_Y (EEPROM_CRASH_DET - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
|
|
// Filament sensor on/off EEPROM setting
|
|
#define EEPROM_FSENSOR (EEPROM_CRASH_COUNT_Y - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-14)
|
|
// Crash detection counter X (last print)
|
|
#define EEPROM_CRASH_COUNT_X (EEPROM_FSENSOR - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-15)
|
|
// Filament runout/error coutner (last print)
|
|
#define EEPROM_FERROR_COUNT (EEPROM_CRASH_COUNT_X - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-16)
|
|
// Power loss errors (last print)
|
|
#define EEPROM_POWER_COUNT (EEPROM_FERROR_COUNT - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-17)
|
|
|
|
#define EEPROM_XYZ_CAL_SKEW (EEPROM_POWER_COUNT - 4) // float for skew backup
|
|
#define EEPROM_WIZARD_ACTIVE (EEPROM_XYZ_CAL_SKEW - 1)
|
|
#define EEPROM_BELTSTATUS_X (EEPROM_WIZARD_ACTIVE - 2) // uint16
|
|
#define EEPROM_BELTSTATUS_Y (EEPROM_BELTSTATUS_X - 2) // uint16
|
|
|
|
#define EEPROM_DIR_DEPTH (EEPROM_BELTSTATUS_Y-1)
|
|
#define EEPROM_DIRS (EEPROM_DIR_DEPTH-80) //8 chars for each dir name, max 10 levels
|
|
#define EEPROM_SD_SORT (EEPROM_DIRS - 1) //0 -time, 1-alpha, 2-none
|
|
#define EEPROM_SECOND_SERIAL_ACTIVE (EEPROM_SD_SORT - 1)
|
|
|
|
#define EEPROM_FSENS_AUTOLOAD_ENABLED (EEPROM_SECOND_SERIAL_ACTIVE - 1)
|
|
|
|
// Crash detection counter X (total)
|
|
#define EEPROM_CRASH_COUNT_X_TOT (EEPROM_FSENS_AUTOLOAD_ENABLED - 2) // uint16
|
|
// Crash detection counter Y (total)
|
|
#define EEPROM_CRASH_COUNT_Y_TOT (EEPROM_CRASH_COUNT_X_TOT - 2) // uint16
|
|
// Filament runout/error coutner (total)
|
|
#define EEPROM_FERROR_COUNT_TOT (EEPROM_CRASH_COUNT_Y_TOT - 2) // uint16
|
|
// Power loss errors (total)
|
|
#define EEPROM_POWER_COUNT_TOT (EEPROM_FERROR_COUNT_TOT - 2) // uint16
|
|
|
|
////////////////////////////////////////
|
|
// TMC2130 Accurate sensorless homing
|
|
|
|
// X-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
|
|
#define EEPROM_TMC2130_HOME_X_ORIGIN (EEPROM_POWER_COUNT_TOT - 1) // uint8
|
|
// X-axis home bsteps (number of microsteps backward)
|
|
#define EEPROM_TMC2130_HOME_X_BSTEPS (EEPROM_TMC2130_HOME_X_ORIGIN - 1) // uint8
|
|
// X-axis home fsteps (number of microsteps forward)
|
|
#define EEPROM_TMC2130_HOME_X_FSTEPS (EEPROM_TMC2130_HOME_X_BSTEPS - 1) // uint8
|
|
// Y-axis home origin (stepper phase in microsteps, 0..63 for 16ustep resolution)
|
|
#define EEPROM_TMC2130_HOME_Y_ORIGIN (EEPROM_TMC2130_HOME_X_FSTEPS - 1) // uint8
|
|
// X-axis home bsteps (number of microsteps backward)
|
|
#define EEPROM_TMC2130_HOME_Y_BSTEPS (EEPROM_TMC2130_HOME_Y_ORIGIN - 1) // uint8
|
|
// X-axis home fsteps (number of microsteps forward)
|
|
#define EEPROM_TMC2130_HOME_Y_FSTEPS (EEPROM_TMC2130_HOME_Y_BSTEPS - 1) // uint8
|
|
// Accurate homing enabled
|
|
#define EEPROM_TMC2130_HOME_ENABLED (EEPROM_TMC2130_HOME_Y_FSTEPS - 1) // uint8
|
|
|
|
|
|
////////////////////////////////////////
|
|
// TMC2130 uStep linearity correction
|
|
|
|
// Linearity correction factor (XYZE)
|
|
#define EEPROM_TMC2130_WAVE_X_FAC (EEPROM_TMC2130_HOME_ENABLED - 1) // uint8
|
|
#define EEPROM_TMC2130_WAVE_Y_FAC (EEPROM_TMC2130_WAVE_X_FAC - 1) // uint8
|
|
#define EEPROM_TMC2130_WAVE_Z_FAC (EEPROM_TMC2130_WAVE_Y_FAC - 1) // uint8
|
|
#define EEPROM_TMC2130_WAVE_E_FAC (EEPROM_TMC2130_WAVE_Z_FAC - 1) // uint8
|
|
|
|
|
|
////////////////////////////////////////
|
|
// TMC2130 uStep resolution
|
|
|
|
// microstep resolution (XYZE): usteps = (256 >> mres)
|
|
#define EEPROM_TMC2130_X_MRES (EEPROM_TMC2130_WAVE_E_FAC - 1) // uint8
|
|
#define EEPROM_TMC2130_Y_MRES (EEPROM_TMC2130_X_MRES - 1) // uint8
|
|
#define EEPROM_TMC2130_Z_MRES (EEPROM_TMC2130_Y_MRES - 1) // uint8
|
|
#define EEPROM_TMC2130_E_MRES (EEPROM_TMC2130_Z_MRES - 1) // uint8
|
|
|
|
// HW
|
|
#define EEPROM_PRINTER_TYPE (EEPROM_TMC2130_E_MRES - 2) // uint16
|
|
#define EEPROM_BOARD_TYPE (EEPROM_PRINTER_TYPE - 2) // uint16
|
|
|
|
// Extruder multiplier for power panic
|
|
#define EEPROM_EXTRUDER_MULTIPLIER_0 (EEPROM_BOARD_TYPE - 4) //float
|
|
#define EEPROM_EXTRUDER_MULTIPLIER_1 (EEPROM_EXTRUDER_MULTIPLIER_0 - 4) //float
|
|
#define EEPROM_EXTRUDER_MULTIPLIER_2 (EEPROM_EXTRUDER_MULTIPLIER_1 - 4) //float
|
|
#define EEPROM_EXTRUDEMULTIPLY (EEPROM_EXTRUDER_MULTIPLIER_2 - 2) // uint16
|
|
|
|
#define EEPROM_UVLO_TINY_CURRENT_POSITION_Z (EEPROM_EXTRUDEMULTIPLY-4) // float
|
|
#define EEPROM_UVLO_TARGET_HOTEND (EEPROM_UVLO_TINY_CURRENT_POSITION_Z-2) // uint16
|
|
|
|
// Sound Mode
|
|
#define EEPROM_SOUND_MODE (EEPROM_UVLO_TARGET_HOTEND-1) // uint8
|
|
#define EEPROM_AUTO_DEPLETE (EEPROM_SOUND_MODE-1) //bool
|
|
|
|
#define EEPROM_FSENS_OQ_MEASS_ENABLED (EEPROM_AUTO_DEPLETE - 1) //bool
|
|
|
|
#define EEPROM_MMU_FAIL_TOT (EEPROM_FSENS_OQ_MEASS_ENABLED - 2) //uint16_t
|
|
#define EEPROM_MMU_FAIL (EEPROM_MMU_FAIL_TOT - 1) //uint8_t
|
|
|
|
#define EEPROM_MMU_LOAD_FAIL_TOT (EEPROM_MMU_FAIL - 2) //uint16_t
|
|
#define EEPROM_MMU_LOAD_FAIL (EEPROM_MMU_LOAD_FAIL_TOT - 1) //uint8_t
|
|
#define EEPROM_MMU_CUTTER_ENABLED (EEPROM_MMU_LOAD_FAIL - 1)
|
|
#define EEPROM_UVLO_MESH_BED_LEVELING_FULL (EEPROM_MMU_CUTTER_ENABLED - 12*12*2) //allow 12 calibration points for future expansion
|
|
|
|
#define EEPROM_MBL_TYPE (EEPROM_UVLO_MESH_BED_LEVELING_FULL-1) //uint8_t for mesh bed leveling precision
|
|
#define EEPROM_MBL_MAGNET_ELIMINATION (EEPROM_MBL_TYPE -1)
|
|
#define EEPROM_MBL_POINTS_NR (EEPROM_MBL_MAGNET_ELIMINATION -1) //uint8_t number of points in one exis for mesh bed leveling
|
|
#define EEPROM_MBL_PROBE_NR (EEPROM_MBL_POINTS_NR-1) //number of measurements for each point
|
|
|
|
#define EEPROM_MMU_STEALTH (EEPROM_MBL_PROBE_NR-1)
|
|
|
|
#define EEPROM_CHECK_MODE (EEPROM_MMU_STEALTH-1) // uint8
|
|
#define EEPROM_NOZZLE_DIAMETER (EEPROM_CHECK_MODE-1) // uint8
|
|
#define EEPROM_NOZZLE_DIAMETER_uM (EEPROM_NOZZLE_DIAMETER-2) // uint16
|
|
#define EEPROM_CHECK_MODEL (EEPROM_NOZZLE_DIAMETER_uM-1) // uint8
|
|
#define EEPROM_CHECK_VERSION (EEPROM_CHECK_MODEL-1) // uint8
|
|
#define EEPROM_CHECK_GCODE (EEPROM_CHECK_VERSION-1) // uint8
|
|
|
|
#define EEPROM_SHEETS_BASE (EEPROM_CHECK_GCODE - EEPROM_SHEETS_SIZEOF) // Sheets
|
|
static Sheets * const EEPROM_Sheets_base = (Sheets*)(EEPROM_SHEETS_BASE);
|
|
|
|
#define EEPROM_FSENSOR_PCB (EEPROM_SHEETS_BASE-1) // uint8
|
|
#define EEPROM_FSENSOR_ACTION_NA (EEPROM_FSENSOR_PCB-1) // uint8
|
|
|
|
#define EEPROM_UVLO_SAVED_TARGET (EEPROM_FSENSOR_ACTION_NA - 4*4) // 4 x float for saved target for all axes
|
|
#define EEPROM_UVLO_FEEDMULTIPLY (EEPROM_UVLO_SAVED_TARGET - 2) // uint16_t for feedmultiply
|
|
|
|
#define EEPROM_BACKLIGHT_LEVEL_HIGH (EEPROM_UVLO_FEEDMULTIPLY-1) // uint8
|
|
#define EEPROM_BACKLIGHT_LEVEL_LOW (EEPROM_BACKLIGHT_LEVEL_HIGH-1) // uint8
|
|
#define EEPROM_BACKLIGHT_MODE (EEPROM_BACKLIGHT_LEVEL_LOW-1) // uint8
|
|
#define EEPROM_BACKLIGHT_TIMEOUT (EEPROM_BACKLIGHT_MODE-2) // uint16
|
|
|
|
#define EEPROM_UVLO_LA_K (EEPROM_BACKLIGHT_TIMEOUT-4) // float
|
|
|
|
//This is supposed to point to last item to allow EEPROM overrun check. Please update when adding new items.
|
|
#define EEPROM_LAST_ITEM EEPROM_UVLO_LA_K
|
|
// !!!!!
|
|
// !!!!! this is end of EEPROM section ... all updates MUST BE inserted before this mark !!!!!
|
|
// !!!!!
|
|
|
|
|
|
|
|
// Currently running firmware, each digit stored as uint16_t.
|
|
// The flavor differentiates a dev, alpha, beta, release candidate or a release version.
|
|
#define EEPROM_FIRMWARE_VERSION_END (FW_PRUSA3D_MAGIC_LEN+8)
|
|
#define EEPROM_FIRMWARE_VERSION_FLAVOR (FW_PRUSA3D_MAGIC_LEN+6)
|
|
#define EEPROM_FIRMWARE_VERSION_REVISION (FW_PRUSA3D_MAGIC_LEN+4)
|
|
#define EEPROM_FIRMWARE_VERSION_MINOR (FW_PRUSA3D_MAGIC_LEN+2)
|
|
#define EEPROM_FIRMWARE_VERSION_MAJOR FW_PRUSA3D_MAGIC_LEN
|
|
// Magic string, indicating that the current or the previous firmware running was the Prusa3D firmware.
|
|
#define EEPROM_FIRMWARE_PRUSA_MAGIC 0
|
|
|
|
|
|
#ifdef __cplusplus
|
|
#include "ConfigurationStore.h"
|
|
static_assert(EEPROM_FIRMWARE_VERSION_END < 20, "Firmware version EEPROM address conflicts with EEPROM_M500_base");
|
|
static constexpr M500_conf * const EEPROM_M500_base = reinterpret_cast<M500_conf*>(20); //offset for storing settings using M500
|
|
static_assert(((sizeof(M500_conf) + 20) < EEPROM_LAST_ITEM), "M500_conf address space conflicts with previous items.");
|
|
#endif
|
|
|
|
enum
|
|
{
|
|
EEPROM_MMU_CUTTER_ENABLED_enabled = 1,
|
|
EEPROM_MMU_CUTTER_ENABLED_always = 2,
|
|
};
|
|
|
|
#ifdef __cplusplus
|
|
void eeprom_init();
|
|
bool eeprom_is_sheet_initialized(uint8_t sheet_num);
|
|
struct SheetName
|
|
{
|
|
char c[sizeof(Sheet::name) + 1];
|
|
};
|
|
void eeprom_default_sheet_name(uint8_t index, SheetName &sheetName);
|
|
int8_t eeprom_next_initialized_sheet(int8_t sheet);
|
|
void eeprom_switch_to_next_sheet();
|
|
#endif
|
|
|
|
#endif // EEPROM_H
|
|
|