..
variants
Removed SG software homming
2017-12-15 14:10:20 +01:00
adc.c
Removed debug messages from serial comunication (octoprint...).
2017-12-27 20:29:24 +01:00
adc.h
new module adc (analog2digital)
2017-12-20 13:42:20 +01:00
BlinkM.cpp
Build 109
2017-11-16 22:03:36 +01:00
BlinkM.h
Build 109
2017-11-16 22:03:36 +01:00
boards.h
EINY -> EINSY
2017-11-27 18:47:48 +01:00
cardreader.cpp
cardreader - new member "paused"
2018-01-31 15:20:27 +01:00
cardreader.h
cardreader - new member "paused"
2018-01-31 15:20:27 +01:00
cmdqueue.cpp
Documented the interrupt blocking by a main thread by its maximum time.
2018-01-20 14:58:30 +01:00
cmdqueue.h
Minimize risk of stepper routine interrupt blocking by reorganizing
2018-01-20 14:37:22 +01:00
config.h
new module adc (analog2digital)
2017-12-20 13:42:20 +01:00
Configuration_adv.h
Missing serial characters debuging
2018-01-02 20:55:33 +01:00
Configuration_prusa.h
Adjusted the features for the debug buid:
2018-02-02 20:37:03 +01:00
Configuration.h
version changed
2018-02-02 17:48:02 +01:00
ConfigurationStore.cpp
Inform user that hardcoded default settings were loaded (EEPROM version change)
2018-01-30 11:31:44 +01:00
ConfigurationStore.h
Inform user that hardcoded default settings were loaded (EEPROM version change)
2018-01-30 11:31:44 +01:00
Dcodes.cpp
New fail stats (global, last print), crashdetection X and Y separated
2018-01-30 13:10:36 +01:00
Dcodes.h
new module adc (analog2digital)
2017-12-20 13:42:20 +01:00
digipot_mcp4451.cpp
3.0.6 sync
2016-08-11 10:42:53 +02:00
dogm_font_data_marlin.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
dogm_lcd_implementation.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
DOGMbitmaps.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
fastio.h
WRITE_NC macro for non-critical (non-synchronized) access to
2018-01-12 20:15:59 +01:00
Firmware.ino
opravene nezadouci resetovani watchdogem
2017-11-27 14:43:56 +01:00
Firmware.ino.rambo.hex
build 143e
2018-01-04 18:08:22 +01:00
Firmware.sublime-project
3.0.6 sync
2016-08-11 10:42:53 +02:00
fsensor.cpp
filament sensor additional check after runout (3mm back, 3mm forward @200mm/min)
2018-01-31 21:10:41 +01:00
fsensor.h
Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update
2017-12-20 13:33:45 +01:00
langtool.php
3.0.6 sync
2016-08-11 10:42:53 +02:00
langtool.pl
merging from dev/MK3
2017-12-02 21:56:39 +01:00
language_all.cpp
Merge pull request #440 from XPila/3.1.1-RC6
2018-01-31 20:21:02 +01:00
language_all.h
Merge pull request #440 from XPila/3.1.1-RC6
2018-01-31 20:21:02 +01:00
language_common.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
language_cz.h
Inform user that hardcoded default settings were loaded (EEPROM version change)
2018-01-30 11:31:44 +01:00
language_de.h
basic language corrections
2017-11-21 14:44:07 +01:00
language_en.h
PINDA temp. calibration warning messages.
2018-01-31 17:03:33 +01:00
language_es.h
basic language corrections
2017-11-21 14:44:07 +01:00
language_it.h
basic language corrections
2017-11-21 14:44:07 +01:00
language_pl.h
basic language corrections
2017-11-21 14:44:07 +01:00
language.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
le.sh
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
LiquidCrystal.cpp
Print class printf function (experimental, disabled by default)
2017-11-20 20:09:54 +01:00
LiquidCrystal.h
Print class printf function (experimental, disabled by default)
2017-11-20 20:09:54 +01:00
Marlin_main.cpp
bugfix - failstats (total counters) reset to zero for empty eeprom (0xff)
2018-02-02 15:59:37 +01:00
Marlin.h
Missed a bit with the last commit.
2018-01-12 22:01:53 +01:00
MarlinSerial.cpp
Optimized the MarlinSerial class by declaring all methods static.
2018-02-02 20:25:19 +01:00
MarlinSerial.h
Optimized the MarlinSerial class by declaring all methods static.
2018-02-02 20:25:19 +01:00
mesh_bed_calibration.cpp
Removed debug messages from serial comunication (octoprint...).
2017-12-27 20:29:24 +01:00
mesh_bed_calibration.h
Fixed homing (mbl and babystep - crashdetection recovery work fine now).
2017-09-23 16:35:01 +02:00
mesh_bed_leveling.cpp
3.0.6 sync
2016-08-11 10:42:53 +02:00
mesh_bed_leveling.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
motion_control.cpp
3.0.6 sync
2016-08-11 10:42:53 +02:00
motion_control.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
pat9125.cpp
Optimization of the filament sensor.
2018-01-23 16:47:42 +01:00
pat9125.h
Optimization of the filament sensor.
2018-01-23 16:47:42 +01:00
pins_Einy_0_3.h
PINDA thermistor and ambient thermistor.
2017-09-05 14:02:35 +02:00
pins_Einy_0_4.h
Definition of 8 pins on the Einsy 0.4 board connected to pin headers
2018-01-12 20:18:20 +01:00
pins_Rambo_1_0.h
PAT9125 I2C, hardware SG homing
2017-08-17 15:23:34 +02:00
pins_Rambo_1_3.h
PAT9125 I2C, hardware SG homing
2017-08-17 15:23:34 +02:00
pins_Rambo.h
PAT9125 I2C, hardware SG homing
2017-08-17 15:23:34 +02:00
pins.h
PAT9125 I2C, hardware SG homing
2017-08-17 15:23:34 +02:00
planner.cpp
Implemented a stepper timer reset after a long blocking cli()
2018-01-20 15:39:21 +01:00
planner.h
Fix of a power panic print stop.
2017-09-21 17:50:39 +02:00
qr_solve.cpp
3.0.6 sync
2016-08-11 10:42:53 +02:00
qr_solve.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
Sd2Card.cpp
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
Sd2Card.h
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
Sd2PinMap.h
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
SdBaseFile.cpp
first working version
2017-11-27 06:20:51 +01:00
SdBaseFile.h
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
SdFatConfig.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
SdFatStructs.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
SdFatUtil.cpp
3.0.10 sync
2017-03-24 19:47:50 +01:00
SdFatUtil.h
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
SdFile.cpp
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
SdFile.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
SdInfo.h
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
SdVolume.cpp
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
SdVolume.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
Servo.cpp
3.0.6 sync
2016-08-11 10:42:53 +02:00
Servo.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
speed_lookuptable.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
stepper.cpp
Implemented a stepper timer reset after a long blocking cli()
2018-01-20 15:39:21 +01:00
stepper.h
Implemented a stepper timer reset after a long blocking cli()
2018-01-20 15:39:21 +01:00
swi2c.cpp
PAT9125 I2C, hardware SG homing
2017-08-17 15:23:34 +02:00
swi2c.h
PAT9125 I2C, hardware SG homing
2017-08-17 15:23:34 +02:00
swspi.cpp
PAT9125 I2C, hardware SG homing
2017-08-17 15:23:34 +02:00
swspi.h
PAT9125 I2C, hardware SG homing
2017-08-17 15:23:34 +02:00
temperature.cpp
PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu
2018-01-25 15:23:11 +01:00
temperature.h
MINTEMP fix
2017-12-23 03:36:08 +01:00
thermistortables.h
new ambient thermistor table
2017-12-12 22:49:47 +01:00
tmc2130.cpp
cardreader - new member "paused"
2018-01-31 15:20:27 +01:00
tmc2130.h
New fail stats (global, last print), crashdetection X and Y separated
2018-01-30 13:10:36 +01:00
ultralcd_implementation_hitachi_HD44780.h
Support for debug builds:
2018-01-18 16:24:25 +01:00
ultralcd_st7920_u8glib_rrd.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
ultralcd.cpp
Merge pull request #440 from XPila/3.1.1-RC6
2018-01-31 20:21:02 +01:00
ultralcd.h
M600 has timeout for nozzle, different procedure for unload
2018-01-15 11:30:28 +01:00
uni_avr_rpi.h
PAT9125 I2C, hardware SG homing
2017-08-17 15:23:34 +02:00
util.cpp
fw version check: FW_VERSION string is case insensitive (parsing RC works)
2018-02-01 20:23:45 +01:00
util.h
3.0.12-RC2 sync
2017-06-29 18:35:43 +02:00
vector_3.cpp
3.0.6 sync
2016-08-11 10:42:53 +02:00
vector_3.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
watchdog.cpp
3.0.6 sync
2016-08-11 10:42:53 +02:00
watchdog.h
3.0.6 sync
2016-08-11 10:42:53 +02:00
3b312a42f8