3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
403d71d902
Prusa-Firmware/Firmware
History
bubnikv 403d71d902 Increased the "calibration point not found" threshold from 0.5mm to 1.mm 
difference from the reference value stored in the EEPROM.
Lowered the speed of lowering the Z axis during the XY calibration
from 0.5mm per zig-zag search to 0.2mm to avoid the nozzle scratching
the bed if the PINDA sensor is mounted too high.
Improved the display routine to break the interpunction from the end
of a sentence. While the result may not be typographically correct,
more fits onto the screen.
2016-07-25 15:33:26 +02:00
..
variants PLA preheat settings for MK2 set to 215/55 2016-07-20 16:30:44 +02:00
BlinkM.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
BlinkM.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
boards.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
cardreader.cpp Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
cardreader.h Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
Configuration_adv.h Reworked calculation of the trapezoidal ramps inside the planner. 2016-07-22 10:37:06 +02:00
Configuration.h Reworked the calculation of jerks in the planner. 2016-07-22 16:52:13 +02:00
ConfigurationStore.cpp Reworked the calculation of jerks in the planner. 2016-07-22 16:52:13 +02:00
ConfigurationStore.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
digipot_mcp4451.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
dogm_font_data_marlin.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
dogm_lcd_implementation.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
DOGMbitmaps.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
fastio.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Firmware.ino MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Firmware.sublime-project Automatic bed calibration by searching the 3x3 point matrix. 2016-06-16 14:29:04 +02:00
langtool.php MK2 Firmware release. 2016-05-31 14:08:04 +02:00
langtool.pl Automatic bed calibration by searching the 3x3 point matrix. 2016-06-16 14:29:04 +02:00
language_all.cpp "Printer has not been calibrated yet, calibrate Z" message on startup, 2016-07-07 21:23:32 +02:00
language_all.h "Printer has not been calibrated yet, calibrate Z" message on startup, 2016-07-07 21:23:32 +02:00
language_cz.h "Printer has not been calibrated yet, calibrate Z" message on startup, 2016-07-07 21:23:32 +02:00
language_en.h "Printer has not been calibrated yet, calibrate Z" message on startup, 2016-07-07 21:23:32 +02:00
language_es.h Fixed ".." label when leaving a subdirectory. 2016-06-20 13:46:37 +02:00
language_it.h Fixed ".." label when leaving a subdirectory. 2016-06-20 13:46:37 +02:00
language_pl.h Fixed ".." label when leaving a subdirectory. 2016-06-20 13:46:37 +02:00
language.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
LiquidCrystal.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
LiquidCrystal.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Marlin_main.cpp Increased the "calibration point not found" threshold from 0.5mm to 1.mm 2016-07-25 15:33:26 +02:00
Marlin.h Removed the dual carriage code for readibility. 2016-07-19 10:57:18 +02:00
MarlinSerial.cpp Removed support for DELTA, SCARA and BARICUDA. 2016-06-23 08:46:15 +02:00
MarlinSerial.h Removed support for DELTA, SCARA and BARICUDA. 2016-06-23 08:46:15 +02:00
mesh_bed_calibration.cpp Increased the "calibration point not found" threshold from 0.5mm to 1.mm 2016-07-25 15:33:26 +02:00
mesh_bed_calibration.h Updated soft end stops with the skew calibration active. 2016-07-07 11:51:24 +02:00
mesh_bed_leveling.cpp Removed support for DELTA, SCARA and BARICUDA. 2016-06-23 08:46:15 +02:00
mesh_bed_leveling.h Automatic bed calibration by searching the 3x3 point matrix. 2016-06-16 14:29:04 +02:00
motion_control.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
motion_control.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
pins.h Removed support for DELTA, SCARA and BARICUDA. 2016-06-23 08:46:15 +02:00
planner.cpp Reworked the calculation of jerks in the planner. 2016-07-22 16:52:13 +02:00
planner.h Reworked the calculation of jerks in the planner. 2016-07-22 16:52:13 +02:00
qr_solve.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
qr_solve.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Sd2Card.cpp Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
Sd2Card.h Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
Sd2PinMap.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdBaseFile.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdBaseFile.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFatConfig.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFatStructs.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFatUtil.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFatUtil.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFile.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFile.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdInfo.h Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
SdVolume.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdVolume.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Servo.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Servo.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
speed_lookuptable.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
stepper.cpp Reworked calculation of the trapezoidal ramps inside the planner. 2016-07-22 10:37:06 +02:00
stepper.h Removed the dual carriage code for readibility. 2016-07-19 10:57:18 +02:00
temperature.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
temperature.h Undo babystepping in Z before G28 / G80, if applied already. 2016-07-18 17:28:54 +02:00
thermistortables.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
ultralcd_implementation_hitachi_HD44780.h Show the Toshiba FlashAir IP address in the menu. 2016-07-22 10:31:30 +02:00
ultralcd_st7920_u8glib_rrd.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
ultralcd.cpp Increased the "calibration point not found" threshold from 0.5mm to 1.mm 2016-07-25 15:33:26 +02:00
ultralcd.h Increased the "calibration point not found" threshold from 0.5mm to 1.mm 2016-07-25 15:33:26 +02:00
util.cpp In addition to the firmware version number, store the "PRUSA3D" 2016-07-08 09:49:15 +02:00
util.h Write the current firmware version into first 8 bytes of the EEPROM, 2016-07-07 22:01:51 +02:00
vector_3.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
vector_3.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
watchdog.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
watchdog.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00