514 lines
12 KiB
C++
514 lines
12 KiB
C++
//mmu.cpp
|
|
|
|
#include "mmu.h"
|
|
#include "planner.h"
|
|
#include "language.h"
|
|
#include "lcd.h"
|
|
#include "uart2.h"
|
|
#include "temperature.h"
|
|
#include "Configuration_prusa.h"
|
|
|
|
|
|
extern const char* lcd_display_message_fullscreen_P(const char *msg);
|
|
extern void lcd_return_to_status();
|
|
|
|
#define MMU_TIMEOUT 100
|
|
|
|
bool mmu_enabled = false;
|
|
|
|
uint8_t mmu_extruder = 0;
|
|
|
|
int8_t mmu_finda = -1;
|
|
|
|
int16_t mmu_version = -1;
|
|
|
|
|
|
//clear rx buffer
|
|
void mmu_clr_rx_buf(void)
|
|
{
|
|
while (fgetc(uart2io) >= 0);
|
|
}
|
|
|
|
//send command - puts
|
|
int mmu_puts_P(const char* str)
|
|
{
|
|
mmu_clr_rx_buf(); //clear rx buffer
|
|
return fputs_P(str, uart2io); //send command
|
|
}
|
|
|
|
//send command - printf
|
|
int mmu_printf_P(const char* format, ...)
|
|
{
|
|
va_list args;
|
|
va_start(args, format);
|
|
mmu_clr_rx_buf(); //clear rx buffer
|
|
int r = vfprintf_P(uart2io, format, args); //send command
|
|
va_end(args);
|
|
return r;
|
|
}
|
|
|
|
//check 'ok' response
|
|
int8_t mmu_rx_ok(void)
|
|
{
|
|
return uart2_rx_str_P(PSTR("ok\n"));
|
|
}
|
|
|
|
//check 'start' response
|
|
int8_t mmu_rx_start(void)
|
|
{
|
|
return uart2_rx_str_P(PSTR("start\n"));
|
|
}
|
|
|
|
//initialize mmu_unit
|
|
bool mmu_init(void)
|
|
{
|
|
uart2_init(); //init uart2
|
|
_delay_ms(10); //wait 10ms for sure
|
|
if (mmu_reset()) //reset mmu
|
|
{
|
|
mmu_read_finda();
|
|
mmu_read_version();
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool mmu_reset(void)
|
|
{
|
|
mmu_puts_P(PSTR("X0\n")); //send command
|
|
unsigned char timeout = 10; //timeout = 10x100ms
|
|
while ((mmu_rx_start() <= 0) && (--timeout))
|
|
delay_keep_alive(MMU_TIMEOUT);
|
|
mmu_enabled = timeout?true:false;
|
|
return mmu_enabled;
|
|
}
|
|
|
|
int8_t mmu_read_finda(void)
|
|
{
|
|
mmu_puts_P(PSTR("P0\n"));
|
|
unsigned char timeout = 10; //10x100ms
|
|
while ((mmu_rx_ok() <= 0) && (--timeout))
|
|
delay_keep_alive(MMU_TIMEOUT);
|
|
mmu_finda = -1;
|
|
if (timeout)
|
|
fscanf_P(uart2io, PSTR("%hhu"), &mmu_finda);
|
|
return mmu_finda;
|
|
}
|
|
|
|
int16_t mmu_read_version(void)
|
|
{
|
|
mmu_puts_P(PSTR("S1\n"));
|
|
unsigned char timeout = 10; //10x100ms
|
|
while ((mmu_rx_ok() <= 0) && (--timeout))
|
|
delay_keep_alive(MMU_TIMEOUT);
|
|
if (timeout)
|
|
fscanf_P(uart2io, PSTR("%u"), &mmu_version);
|
|
return mmu_version;
|
|
}
|
|
|
|
void extr_mov(float shift, float feed_rate)
|
|
{ //move extruder no matter what the current heater temperature is
|
|
set_extrude_min_temp(.0);
|
|
current_position[E_AXIS] += shift;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feed_rate, active_extruder);
|
|
set_extrude_min_temp(EXTRUDE_MINTEMP);
|
|
}
|
|
|
|
|
|
void change_extr(int
|
|
#ifdef SNMM
|
|
extr
|
|
#endif //SNMM
|
|
) { //switches multiplexer for extruders
|
|
#ifdef SNMM
|
|
st_synchronize();
|
|
delay(100);
|
|
|
|
disable_e0();
|
|
disable_e1();
|
|
disable_e2();
|
|
|
|
mmu_extruder = extr;
|
|
|
|
pinMode(E_MUX0_PIN, OUTPUT);
|
|
pinMode(E_MUX1_PIN, OUTPUT);
|
|
|
|
switch (extr) {
|
|
case 1:
|
|
WRITE(E_MUX0_PIN, HIGH);
|
|
WRITE(E_MUX1_PIN, LOW);
|
|
|
|
break;
|
|
case 2:
|
|
WRITE(E_MUX0_PIN, LOW);
|
|
WRITE(E_MUX1_PIN, HIGH);
|
|
|
|
break;
|
|
case 3:
|
|
WRITE(E_MUX0_PIN, HIGH);
|
|
WRITE(E_MUX1_PIN, HIGH);
|
|
|
|
break;
|
|
default:
|
|
WRITE(E_MUX0_PIN, LOW);
|
|
WRITE(E_MUX1_PIN, LOW);
|
|
|
|
break;
|
|
}
|
|
delay(100);
|
|
#endif
|
|
}
|
|
|
|
int get_ext_nr()
|
|
{ //reads multiplexer input pins and return current extruder number (counted from 0)
|
|
#ifndef SNMM
|
|
return(mmu_extruder); //update needed
|
|
#else
|
|
return(2 * READ(E_MUX1_PIN) + READ(E_MUX0_PIN));
|
|
#endif
|
|
}
|
|
|
|
|
|
void display_loading()
|
|
{
|
|
switch (mmu_extruder)
|
|
{
|
|
case 1: lcd_display_message_fullscreen_P(_T(MSG_FILAMENT_LOADING_T1)); break;
|
|
case 2: lcd_display_message_fullscreen_P(_T(MSG_FILAMENT_LOADING_T2)); break;
|
|
case 3: lcd_display_message_fullscreen_P(_T(MSG_FILAMENT_LOADING_T3)); break;
|
|
default: lcd_display_message_fullscreen_P(_T(MSG_FILAMENT_LOADING_T0)); break;
|
|
}
|
|
}
|
|
|
|
void extr_adj(int extruder) //loading filament for SNMM
|
|
{
|
|
#ifndef SNMM
|
|
printf_P(PSTR("L%d \n"),extruder);
|
|
fprintf_P(uart2io, PSTR("L%d\n"), extruder);
|
|
|
|
//show which filament is currently loaded
|
|
|
|
lcd_update_enable(false);
|
|
lcd_clear();
|
|
lcd_set_cursor(0, 1); lcd_puts_P(_T(MSG_LOADING_FILAMENT));
|
|
//if(strlen(_T(MSG_LOADING_FILAMENT))>18) lcd.setCursor(0, 1);
|
|
//else lcd.print(" ");
|
|
lcd_print(" ");
|
|
lcd_print(mmu_extruder + 1);
|
|
|
|
// get response
|
|
manage_response(false, false);
|
|
|
|
lcd_update_enable(true);
|
|
|
|
|
|
//lcd_return_to_status();
|
|
#else
|
|
|
|
bool correct;
|
|
max_feedrate[E_AXIS] =80;
|
|
//max_feedrate[E_AXIS] = 50;
|
|
START:
|
|
lcd_clear();
|
|
lcd_set_cursor(0, 0);
|
|
switch (extruder) {
|
|
case 1: lcd_display_message_fullscreen_P(_T(MSG_FILAMENT_LOADING_T1)); break;
|
|
case 2: lcd_display_message_fullscreen_P(_T(MSG_FILAMENT_LOADING_T2)); break;
|
|
case 3: lcd_display_message_fullscreen_P(_T(MSG_FILAMENT_LOADING_T3)); break;
|
|
default: lcd_display_message_fullscreen_P(_T(MSG_FILAMENT_LOADING_T0)); break;
|
|
}
|
|
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
|
do{
|
|
extr_mov(0.001,1000);
|
|
delay_keep_alive(2);
|
|
} while (!lcd_clicked());
|
|
//delay_keep_alive(500);
|
|
KEEPALIVE_STATE(IN_HANDLER);
|
|
st_synchronize();
|
|
//correct = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_FIL_LOADED_CHECK, false);
|
|
//if (!correct) goto START;
|
|
//extr_mov(BOWDEN_LENGTH/2.f, 500); //dividing by 2 is there because of max. extrusion length limitation (x_max + y_max)
|
|
//extr_mov(BOWDEN_LENGTH/2.f, 500);
|
|
extr_mov(bowden_length[extruder], 500);
|
|
lcd_clear();
|
|
lcd_set_cursor(0, 0); lcd_puts_P(_T(MSG_LOADING_FILAMENT));
|
|
if(strlen(_T(MSG_LOADING_FILAMENT))>18) lcd_set_cursor(0, 1);
|
|
else lcd_print(" ");
|
|
lcd_print(mmu_extruder + 1);
|
|
lcd_set_cursor(0, 2); lcd_puts_P(_T(MSG_PLEASE_WAIT));
|
|
st_synchronize();
|
|
max_feedrate[E_AXIS] = 50;
|
|
lcd_update_enable(true);
|
|
lcd_return_to_status();
|
|
lcdDrawUpdate = 2;
|
|
#endif
|
|
}
|
|
|
|
|
|
void extr_unload()
|
|
{ //unload just current filament for multimaterial printers
|
|
#ifdef SNMM
|
|
float tmp_motor[3] = DEFAULT_PWM_MOTOR_CURRENT;
|
|
float tmp_motor_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
|
|
uint8_t SilentMode = eeprom_read_byte((uint8_t*)EEPROM_SILENT);
|
|
#endif
|
|
|
|
if (degHotend0() > EXTRUDE_MINTEMP)
|
|
{
|
|
#ifndef SNMM
|
|
st_synchronize();
|
|
|
|
//show which filament is currently unloaded
|
|
lcd_update_enable(false);
|
|
lcd_clear();
|
|
lcd_set_cursor(0, 1); lcd_puts_P(_T(MSG_UNLOADING_FILAMENT));
|
|
lcd_print(" ");
|
|
lcd_print(mmu_extruder + 1);
|
|
|
|
current_position[E_AXIS] -= 80;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2500 / 60, active_extruder);
|
|
st_synchronize();
|
|
printf_P(PSTR("U0\n"));
|
|
fprintf_P(uart2io, PSTR("U0\n"));
|
|
|
|
// get response
|
|
manage_response(false, true);
|
|
|
|
lcd_update_enable(true);
|
|
#else //SNMM
|
|
|
|
lcd_clear();
|
|
lcd_display_message_fullscreen_P(PSTR(""));
|
|
max_feedrate[E_AXIS] = 50;
|
|
lcd_set_cursor(0, 0); lcd_puts_P(_T(MSG_UNLOADING_FILAMENT));
|
|
lcd_print(" ");
|
|
lcd_print(mmu_extruder + 1);
|
|
lcd_set_cursor(0, 2); lcd_puts_P(_T(MSG_PLEASE_WAIT));
|
|
if (current_position[Z_AXIS] < 15) {
|
|
current_position[Z_AXIS] += 15; //lifting in Z direction to make space for extrusion
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 25, active_extruder);
|
|
}
|
|
|
|
current_position[E_AXIS] += 10; //extrusion
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 10, active_extruder);
|
|
st_current_set(2, E_MOTOR_HIGH_CURRENT);
|
|
if (current_temperature[0] < 230) { //PLA & all other filaments
|
|
current_position[E_AXIS] += 5.4;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2800 / 60, active_extruder);
|
|
current_position[E_AXIS] += 3.2;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
|
|
current_position[E_AXIS] += 3;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3400 / 60, active_extruder);
|
|
}
|
|
else { //ABS
|
|
current_position[E_AXIS] += 3.1;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2000 / 60, active_extruder);
|
|
current_position[E_AXIS] += 3.1;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2500 / 60, active_extruder);
|
|
current_position[E_AXIS] += 4;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
|
|
/*current_position[X_AXIS] += 23; //delay
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder); //delay
|
|
current_position[X_AXIS] -= 23; //delay
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600 / 60, active_extruder); //delay*/
|
|
delay_keep_alive(4700);
|
|
}
|
|
|
|
max_feedrate[E_AXIS] = 80;
|
|
current_position[E_AXIS] -= (bowden_length[mmu_extruder] + 60 + FIL_LOAD_LENGTH) / 2;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 500, active_extruder);
|
|
current_position[E_AXIS] -= (bowden_length[mmu_extruder] + 60 + FIL_LOAD_LENGTH) / 2;
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 500, active_extruder);
|
|
st_synchronize();
|
|
//st_current_init();
|
|
if (SilentMode != SILENT_MODE_OFF) st_current_set(2, tmp_motor[2]); //set back to normal operation currents
|
|
else st_current_set(2, tmp_motor_loud[2]);
|
|
lcd_update_enable(true);
|
|
lcd_return_to_status();
|
|
max_feedrate[E_AXIS] = 50;
|
|
#endif //SNMM
|
|
}
|
|
else
|
|
{
|
|
lcd_clear();
|
|
lcd_set_cursor(0, 0);
|
|
lcd_puts_P(_T(MSG_ERROR));
|
|
lcd_set_cursor(0, 2);
|
|
lcd_puts_P(_T(MSG_PREHEAT_NOZZLE));
|
|
delay(2000);
|
|
lcd_clear();
|
|
}
|
|
//lcd_return_to_status();
|
|
}
|
|
|
|
//wrapper functions for loading filament
|
|
void extr_adj_0()
|
|
{
|
|
#ifndef SNMM
|
|
enquecommand_P(PSTR("M701 E0"));
|
|
#else
|
|
change_extr(0);
|
|
extr_adj(0);
|
|
#endif
|
|
}
|
|
|
|
void extr_adj_1()
|
|
{
|
|
#ifndef SNMM
|
|
enquecommand_P(PSTR("M701 E1"));
|
|
#else
|
|
change_extr(1);
|
|
extr_adj(1);
|
|
#endif
|
|
}
|
|
|
|
void extr_adj_2()
|
|
{
|
|
#ifndef SNMM
|
|
enquecommand_P(PSTR("M701 E2"));
|
|
#else
|
|
change_extr(2);
|
|
extr_adj(2);
|
|
#endif
|
|
}
|
|
|
|
void extr_adj_3()
|
|
{
|
|
#ifndef SNMM
|
|
enquecommand_P(PSTR("M701 E3"));
|
|
#else
|
|
change_extr(3);
|
|
extr_adj(3);
|
|
#endif
|
|
}
|
|
|
|
void extr_adj_4()
|
|
{
|
|
#ifndef SNMM
|
|
enquecommand_P(PSTR("M701 E4"));
|
|
#else
|
|
change_extr(4);
|
|
extr_adj(4);
|
|
#endif
|
|
}
|
|
|
|
void load_all()
|
|
{
|
|
#ifndef SNMM
|
|
enquecommand_P(PSTR("M701 E0"));
|
|
enquecommand_P(PSTR("M701 E1"));
|
|
enquecommand_P(PSTR("M701 E2"));
|
|
enquecommand_P(PSTR("M701 E3"));
|
|
enquecommand_P(PSTR("M701 E4"));
|
|
#else
|
|
for (int i = 0; i < 4; i++)
|
|
{
|
|
change_extr(i);
|
|
extr_adj(i);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
//wrapper functions for changing extruders
|
|
void extr_change_0()
|
|
{
|
|
change_extr(0);
|
|
lcd_return_to_status();
|
|
}
|
|
|
|
void extr_change_1()
|
|
{
|
|
change_extr(1);
|
|
lcd_return_to_status();
|
|
}
|
|
|
|
void extr_change_2()
|
|
{
|
|
change_extr(2);
|
|
lcd_return_to_status();
|
|
}
|
|
|
|
void extr_change_3()
|
|
{
|
|
change_extr(3);
|
|
lcd_return_to_status();
|
|
}
|
|
|
|
//wrapper functions for unloading filament
|
|
void extr_unload_all()
|
|
{
|
|
if (degHotend0() > EXTRUDE_MINTEMP)
|
|
{
|
|
for (int i = 0; i < 4; i++)
|
|
{
|
|
change_extr(i);
|
|
extr_unload();
|
|
}
|
|
}
|
|
else
|
|
{
|
|
lcd_clear();
|
|
lcd_set_cursor(0, 0);
|
|
lcd_puts_P(_T(MSG_ERROR));
|
|
lcd_set_cursor(0, 2);
|
|
lcd_puts_P(_T(MSG_PREHEAT_NOZZLE));
|
|
delay(2000);
|
|
lcd_clear();
|
|
lcd_return_to_status();
|
|
}
|
|
}
|
|
|
|
//unloading just used filament (for snmm)
|
|
void extr_unload_used()
|
|
{
|
|
if (degHotend0() > EXTRUDE_MINTEMP) {
|
|
for (int i = 0; i < 4; i++) {
|
|
if (snmm_filaments_used & (1 << i)) {
|
|
change_extr(i);
|
|
extr_unload();
|
|
}
|
|
}
|
|
snmm_filaments_used = 0;
|
|
}
|
|
else {
|
|
lcd_clear();
|
|
lcd_set_cursor(0, 0);
|
|
lcd_puts_P(_T(MSG_ERROR));
|
|
lcd_set_cursor(0, 2);
|
|
lcd_puts_P(_T(MSG_PREHEAT_NOZZLE));
|
|
delay(2000);
|
|
lcd_clear();
|
|
lcd_return_to_status();
|
|
}
|
|
}
|
|
|
|
void extr_unload_0()
|
|
{
|
|
change_extr(0);
|
|
extr_unload();
|
|
}
|
|
|
|
void extr_unload_1()
|
|
{
|
|
change_extr(1);
|
|
extr_unload();
|
|
}
|
|
|
|
void extr_unload_2()
|
|
{
|
|
change_extr(2);
|
|
extr_unload();
|
|
}
|
|
|
|
void extr_unload_3()
|
|
{
|
|
change_extr(3);
|
|
extr_unload();
|
|
}
|
|
|
|
void extr_unload_4()
|
|
{
|
|
change_extr(4);
|
|
extr_unload();
|
|
}
|