..
variants
Disable temperature compensation and temperature calibration menu if superPINDA is detected.
2020-06-16 00:19:06 +02:00
adc.c
IR sensor gen. II
2019-09-16 00:43:37 +02:00
adc.h
Fix ADC index overflow
2018-07-17 17:55:04 +02:00
AutoDeplete.cpp
Comment.
2019-01-04 19:56:15 +01:00
AutoDeplete.h
Add filament auto deplete engine for multi-material prints with MMUv2.
2019-01-03 22:58:25 +01:00
backlight.cpp
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
backlight.h
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
BlinkM.cpp
BlinkM.h
boards.h
MK3 configuration files, renamed EINY to EINSY
2018-02-01 17:10:41 +01:00
bootapp.c
New lang, arduino 1.8.5 - boot_app debug output
2018-10-18 16:20:14 +02:00
bootapp.h
New lang, arduino 1.8.5 - boot_app debug output
2018-10-18 16:20:14 +02:00
cardreader.cpp
Code size optimization: 2KB down ( #2687 )
2020-06-01 17:51:28 +02:00
cardreader.h
Use combined creation/modification file time stamps for sorting
2020-02-14 09:09:15 +01:00
cmdqueue.cpp
Fix kill messages
2019-11-29 22:49:22 +02:00
cmdqueue.h
Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card.
2019-08-23 19:30:20 +02:00
config.h
Merge pull request #2520 from MRprusa3d/PFW-x001bPR
2020-03-26 17:36:18 +01:00
Configuration_adv.h
Parametrize LA limits and threshold values
2020-04-28 17:31:42 +02:00
Configuration.cpp
some improvements
2019-07-10 16:29:40 +02:00
Configuration.h
Version changed (3.9.0 build 3421) - sync
2020-05-18 16:56:32 +02:00
ConfigurationStore.cpp
Fixup prefix echomagic for the LA config report
2019-05-24 17:08:32 +02:00
ConfigurationStore.h
Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S
2019-03-19 21:39:59 +00:00
conv2str.cpp
LCD menu optimalization - conversion functions - source separation
2018-07-16 17:23:35 +02:00
conv2str.h
LCD menu optimalization - conversion functions - source separation
2018-07-16 17:23:35 +02:00
Dcodes.cpp
Merge pull request #2568 from 3d-gussner/MK3_Dcodes_move
2020-04-03 11:12:30 +02:00
Dcodes.h
Bugfix for last PR
2020-04-07 11:22:48 +02:00
doxyfile
Updated doxygen docs to work better with confluence.
2019-07-19 13:51:55 +02:00
eeprom.cpp
EEPROM_BABYSTEP_Z using removal
2019-10-01 16:57:37 +02:00
eeprom.h
MK3s IR sensor improvement ( #2698 )
2020-06-03 16:14:56 +02:00
fastio.h
WRITE_NC macro for non-critical (non-synchronized) access to
2018-01-12 20:15:59 +01:00
Firmware.ino
LCD menu optimalization - LiquidCrystal_Prusa removed
2018-07-16 23:23:15 +02:00
first_lay_cal.cpp
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
first_lay_cal.h
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
fsensor.cpp
MK3s IR sensor improvement ( #2698 )
2020-06-03 16:14:56 +02:00
fsensor.h
MK3s IR sensor improvement ( #2698 )
2020-06-03 16:14:56 +02:00
heatbed_pwm.cpp
Fix compiler warning enumeration value 'ONE_TO_FALL' not handled in switch.
2020-06-08 13:07:19 +02:00
io_atmega2560.h
"disable_z()" for Delta PSU II
2019-03-25 23:28:25 +01:00
la10compat.cpp
Increase E-jerk LA10->15 flattened zone
2020-05-18 01:22:49 +02:00
la10compat.h
Adjust E-jerk in LA10 compatibility mode
2020-02-03 15:42:27 +01:00
language.c
Fix language related warnings in LANG_MODE 0
2019-07-29 15:55:42 +03:00
language.h
Hard reset and readded change
2020-01-31 14:47:44 +01:00
lcd.cpp
fix the knob long-press causing hang in modal dialogs
2019-10-01 17:13:36 +02:00
lcd.h
Merge branch 'MK3' into MK3_Translations
2019-09-12 16:28:36 +03:00
le.sh
make all shell scripts executable
2018-12-10 07:09:03 -07:00
Marlin_main.cpp
Do not compile, if PINDA temperature compensation start point is lower than PINDA_MINTEMP. Document.
2020-06-16 02:03:14 +02:00
Marlin.h
Remove temp_cal_active variable.
2020-06-11 20:00:55 +02:00
MarlinSerial.cpp
Optimized LiquidCrystal class
2018-06-08 14:35:47 +02:00
MarlinSerial.h
More than 7.5KB saved by slight refactoring of printing to serial line
2019-07-12 10:10:56 +02:00
menu.cpp
Merge remote-tracking branch 'upstream/MK3' into MK3_LA15
2019-12-04 17:27:23 +01:00
menu.h
Fix Live K, allow "Advance K" to be translated
2019-12-05 15:18:24 +01:00
mesh_bed_calibration.cpp
Code size optimization: 2KB down ( #2687 )
2020-06-01 17:51:28 +02:00
mesh_bed_calibration.h
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
2019-03-14 01:52:44 +01:00
mesh_bed_leveling.cpp
7x7 points mesh bed leveling
2019-02-14 10:57:58 +02:00
mesh_bed_leveling.h
messages.c
MK3s IR sensor improvement ( #2698 )
2020-06-03 16:14:56 +02:00
messages.h
MK3s IR sensor improvement ( #2698 )
2020-06-03 16:14:56 +02:00
mmu.cpp
Code size optimization: 2KB down ( #2687 )
2020-06-01 17:51:28 +02:00
mmu.h
Show FINDA state as N/A if last received response is older than 1s.
2019-10-31 17:45:22 +01:00
motion_control.cpp
motion_control.h
optiboot_w25x20cl.cpp
Handle second serial port correctly
2020-05-27 17:40:14 +03:00
optiboot_w25x20cl.h
Fix missing start on MK3/S
2020-05-27 09:44:28 +03:00
pat9125.c
Return correct status from pat9125_update_bs
2020-02-06 16:39:08 +01:00
pat9125.h
FS: Improve reliability on speeds with poor optical tracking
2020-02-06 15:27:22 +01:00
pins_Einsy_1_0.h
Merge branch 'MK3' into MK3-PFW-1024
2019-11-29 13:07:45 +02:00
pins_Rambo_1_0.h
MK2.5 IR_SENSOR_PIN modified
2019-02-11 14:32:21 +01:00
pins_Rambo_1_3.h
debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified
2019-03-06 19:56:48 +01:00
pins.h
Fix compiler warnings macro redefined.
2019-03-05 15:56:20 +01:00
planner.cpp
Remove cumulative error in segments without cruising (take 3)
2020-06-21 16:32:22 +02:00
planner.h
Code size optimization: 2KB down ( #2687 )
2020-06-01 17:51:28 +02:00
printers.h
Remove commented out defines.
2019-07-10 17:40:33 +02:00
qr_solve.cpp
qr_solve.h
rbuf.c
T-codes for MMU_V2: initial version
2018-07-09 13:57:36 +02:00
rbuf.h
T-codes for MMU_V2: initial version
2018-07-09 13:57:36 +02:00
Sd2Card.cpp
reinitialize the timestamp to ensure enough time to receive response for 0xFF sent.
2019-08-11 17:57:41 -04:00
Sd2Card.h
Fix for Toshiba FlashAir (or other) SD card initialization - add clock cycles between sending CMD0 and CMD8. Redone for MK3 branch)
2019-08-08 15:45:59 -04:00
Sd2PinMap.h
SdBaseFile.cpp
Support for more special characters allowed in file names (^ + = [ ] ;
2019-08-27 13:47:58 +02:00
SdBaseFile.h
SdFatConfig.h
SdFatStructs.h
SdFatUtil.cpp
Fix compiler warning: sketch/SdFatUtil.cpp:49:7: warning: unused variable 'i' [-Wunused-variable]
2018-07-25 15:19:10 +02:00
SdFatUtil.h
SdFile.cpp
SdFile.h
Optimized LiquidCrystal class
2018-06-08 14:35:47 +02:00
SdInfo.h
SdVolume.cpp
SdVolume.h
Servo.cpp
Servo.h
sm4.c
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
2018-10-08 15:58:49 +02:00
sm4.h
New XYZ calibration with image processing
2018-03-13 12:55:35 +01:00
sound.cpp
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
sound.h
Toggle Sound
2019-08-31 16:56:14 +03:00
speed_lookuptable.cpp
Move speed lookup defs into a separate source
2019-05-24 17:08:32 +02:00
speed_lookuptable.h
Move calc_timer into speed_lookup_table for planner reuse
2019-05-24 17:08:32 +02:00
spi.c
New SPI (do not use Arduino SPI class)
2018-03-29 17:42:41 +02:00
spi.h
New ML support - W25X20CL external spi flash support
2018-06-08 00:20:28 +02:00
static_assert.h
static_assert - portable solution compatible with C++98
2018-09-27 19:59:29 +02:00
stepper.cpp
Reset LA_phase at each trapezoid stage
2020-06-22 00:19:47 +02:00
stepper.h
Move reset LA state from G80 to M84
2020-04-29 22:51:23 +02:00
stk500.h
Added support for a secondary boot loader, based on the OptiBoot project,
2018-06-14 15:13:21 +02:00
swi2c.c
Fix compiler warning arduino-1.6.9/hardware/tools/avr/avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>." [-Wcpp]
2018-07-23 13:47:15 +02:00
swi2c.h
SWI2C for PAT9125 simplified/optimized
2018-07-12 17:55:38 +02:00
swspi.cpp
swspi.h
system_timer.h
ALTFAN implementation ( #2692 )
2020-06-01 17:58:15 +02:00
temperature.cpp
Do not compile, if PINDA temperature compensation start point is lower than PINDA_MINTEMP. Document.
2020-06-16 02:03:14 +02:00
temperature.h
Move has_temperature_compensation() into temperature.cpp.
2020-06-16 00:41:21 +02:00
thermistortables.h
New ML support - menu tunning, startup
2018-06-10 16:04:32 +02:00
timer02.c
Merge branch 'MK3' into MK3_TONE
2019-11-29 23:16:46 +02:00
timer02.h
Re-enable Tone
2019-07-30 16:05:40 +03:00
Timer.cpp
Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2.
2019-01-28 19:29:31 +01:00
Timer.h
Store timer period in TimerRemaining.
2018-06-11 23:41:36 +02:00
TimerRemaining.h
Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2.
2019-01-28 19:29:31 +01:00
tmc2130.cpp
♻️ Code optimization
2020-04-02 14:44:44 +03:00
tmc2130.h
Fix compiler warnings
2019-07-16 17:31:56 +02:00
tone04.c
ALTFAN implementation ( #2692 )
2020-06-01 17:58:15 +02:00
tone04.h
ALTFAN implementation ( #2692 )
2020-06-01 17:58:15 +02:00
uart2.c
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
2018-10-08 15:58:49 +02:00
uart2.h
MMU - communication, check after start, code cleaning
2018-08-07 20:37:59 +02:00
ultralcd.cpp
Merge pull request #2748 from mkbel/detect_superpinda
2020-06-16 14:07:12 +02:00
ultralcd.h
MK3s IR sensor improvement ( #2698 )
2020-06-03 16:14:56 +02:00
uni_avr_rpi.h
Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:""
2018-07-23 13:35:38 +02:00
util.cpp
default nozzle diameter for farm mode
2019-09-23 17:13:33 +02:00
util.h
default nozzle diameter for farm mode
2019-09-23 17:13:33 +02:00
vector_3.cpp
vector_3.h
w25x20cl.c
Added support for a secondary boot loader, based on the OptiBoot project,
2018-06-14 15:13:21 +02:00
w25x20cl.h
Added support for a secondary boot loader, based on the OptiBoot project,
2018-06-14 15:13:21 +02:00
xyzcal.cpp
Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation.
2019-01-27 22:48:51 +01:00
xyzcal.h
XYZ calibration - accuracy improvement
2018-03-27 17:27:41 +02:00
51a539608c