135 lines
4.4 KiB
C
135 lines
4.4 KiB
C
/*****************************************************************
|
|
* Rambo mini 1.3 Pin Assignments
|
|
******************************************************************/
|
|
|
|
#define ELECTRONICS "RAMBo13a"
|
|
|
|
#define KNOWN_BOARD
|
|
#ifndef __AVR_ATmega2560__
|
|
#error Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
|
|
#define PINDA_THERMISTOR
|
|
|
|
#define SWI2C // enable software i2c
|
|
#define SWI2C_A8 // 8bit address functions
|
|
|
|
#define PAT9125_SWI2C
|
|
#define PAT9125_SWI2C_SDA 20 //SDA on P3
|
|
#define PAT9125_SWI2C_SCL 21 //SCL on P3
|
|
#define PAT9125_SWI2C_CFG 0xb1 //2us clock delay, 2048 cycles timeout
|
|
|
|
//#define PAT9125_HWI2C
|
|
|
|
#define X_STEP_PIN 37
|
|
#define X_DIR_PIN 48
|
|
#define X_MIN_PIN 12
|
|
#define X_MAX_PIN -1
|
|
#define X_ENABLE_PIN 29
|
|
#define X_MS1_PIN 40
|
|
#define X_MS2_PIN 41
|
|
|
|
#define Y_STEP_PIN 36
|
|
#define Y_DIR_PIN 49
|
|
#define Y_MIN_PIN 11
|
|
#define Y_MAX_PIN -1
|
|
#define Y_ENABLE_PIN 28
|
|
#define Y_MS1_PIN 69
|
|
#define Y_MS2_PIN 39
|
|
|
|
#define Z_STEP_PIN 35
|
|
#define Z_DIR_PIN 47
|
|
#define Z_MIN_PIN 10
|
|
#define Z_MAX_PIN 23
|
|
#define Z_ENABLE_PIN 27
|
|
#define Z_MS1_PIN 68
|
|
#define Z_MS2_PIN 67
|
|
|
|
#define HEATER_BED_PIN 4 //PG5
|
|
#define TEMP_BED_PIN 2 //A2
|
|
|
|
#define HEATER_0_PIN 3 //PE5
|
|
#define TEMP_0_PIN 0 //A0
|
|
|
|
#define HEATER_1_PIN -1
|
|
#define TEMP_1_PIN -1 //A1
|
|
|
|
#define HEATER_2_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
|
|
#define TEMP_AMBIENT_PIN 6 //A6
|
|
|
|
#define TEMP_PINDA_PIN 1 //A1
|
|
|
|
|
|
|
|
#define E0_STEP_PIN 34
|
|
#define E0_DIR_PIN 43
|
|
#define E0_ENABLE_PIN 26
|
|
#define E0_MS1_PIN 65
|
|
#define E0_MS2_PIN 66
|
|
|
|
|
|
#define MOTOR_CURRENT_PWM_XY_PIN 46
|
|
#define MOTOR_CURRENT_PWM_Z_PIN 45
|
|
#define MOTOR_CURRENT_PWM_E_PIN 44
|
|
#define SDPOWER -1
|
|
#define SDSS 53
|
|
#define LED_PIN 13
|
|
#define FAN_PIN 6
|
|
#define FAN_1_PIN -1
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1 // 80 with Smart Controller LCD
|
|
#define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing.
|
|
#define TACH_0 30 // noctua extruder fan
|
|
|
|
#ifdef ULTRA_LCD
|
|
|
|
//#define KILL_PIN 32
|
|
|
|
#ifdef NEWPANEL
|
|
|
|
#define BEEPER 84 // Beeper on AUX-4
|
|
#define LCD_PINS_RS 82
|
|
#define LCD_PINS_ENABLE 18
|
|
#define LCD_PINS_D4 19
|
|
#define LCD_PINS_D5 70
|
|
#define LCD_PINS_D6 85
|
|
#define LCD_PINS_D7 71
|
|
|
|
//buttons are directly attached using AUX-2
|
|
#define BTN_EN1 72
|
|
#define BTN_EN2 14
|
|
#define BTN_ENC 9 // the click
|
|
|
|
#define SDCARDDETECT 15
|
|
|
|
|
|
#endif //NEWPANEL
|
|
#endif //ULTRA_LCD
|
|
|
|
// Support for an 8 bit logic analyzer, for example the Saleae.
|
|
// Channels 0-2 are fast, they could generate 2.667Mhz waveform with a software loop.
|
|
#define LOGIC_ANALYZER_CH0 X_MIN_PIN // PB6
|
|
#define LOGIC_ANALYZER_CH1 Y_MIN_PIN // PB5
|
|
#define LOGIC_ANALYZER_CH2 53 // PB0 (PROC_nCS)
|
|
// Channels 3-7 are slow, they could generate
|
|
// 0.889Mhz waveform with a software loop and interrupt locking,
|
|
// 1.333MHz waveform without interrupt locking.
|
|
#define LOGIC_ANALYZER_CH3 73 // PJ3
|
|
// PK0 has no Arduino digital pin assigned, so we set it directly.
|
|
#define WRITE_LOGIC_ANALYZER_CH4(value) if (value) PORTK |= (1 << 0); else PORTK &= ~(1 << 0) // PK0
|
|
#define LOGIC_ANALYZER_CH5 16 // PH0 (RXD2)
|
|
#define LOGIC_ANALYZER_CH6 17 // PH1 (TXD2)
|
|
#define LOGIC_ANALYZER_CH7 76 // PJ5
|
|
|
|
#define LOGIC_ANALYZER_CH0_ENABLE SET_OUTPUT(LOGIC_ANALYZER_CH0)
|
|
#define LOGIC_ANALYZER_CH1_ENABLE SET_OUTPUT(LOGIC_ANALYZER_CH1)
|
|
#define LOGIC_ANALYZER_CH2_ENABLE SET_OUTPUT(LOGIC_ANALYZER_CH2)
|
|
#define LOGIC_ANALYZER_CH3_ENABLE SET_OUTPUT(LOGIC_ANALYZER_CH3)
|
|
#define LOGIC_ANALYZER_CH4_ENABLE do { DDRK |= 1 << 0; } while (0)
|
|
#define LOGIC_ANALYZER_CH5_ENABLE do { cbi(UCSR2B, TXEN2); cbi(UCSR2B, RXEN2); cbi(UCSR2B, RXCIE2); SET_OUTPUT(LOGIC_ANALYZER_CH5); } while (0)
|
|
#define LOGIC_ANALYZER_CH6_ENABLE do { cbi(UCSR2B, TXEN2); cbi(UCSR2B, RXEN2); cbi(UCSR2B, RXCIE2); SET_OUTPUT(LOGIC_ANALYZER_CH6); } while (0)
|
|
#define LOGIC_ANALYZER_CH7_ENABLE SET_OUTPUT(LOGIC_ANALYZER_CH7)
|
|
|