354 lines
15 KiB
C++
354 lines
15 KiB
C++
//! @file
|
|
|
|
#include "Marlin.h"
|
|
#include "planner.h"
|
|
#include "temperature.h"
|
|
#include "ultralcd.h"
|
|
#include "ConfigurationStore.h"
|
|
#include "Configuration_prusa.h"
|
|
|
|
#ifdef MESH_BED_LEVELING
|
|
#include "mesh_bed_leveling.h"
|
|
#endif
|
|
|
|
#ifdef TMC2130
|
|
#include "tmc2130.h"
|
|
#endif
|
|
|
|
|
|
M500_conf cs;
|
|
|
|
//! @brief Write data to EEPROM
|
|
//! @param pos destination in EEPROM, 0 is start
|
|
//! @param value value to be written
|
|
//! @param size size of type pointed by value
|
|
//! @param name name of variable written, used only for debug input if DEBUG_EEPROM_WRITE defined
|
|
//! @retval true success
|
|
//! @retval false failed
|
|
#ifdef DEBUG_EEPROM_WRITE
|
|
static bool EEPROM_writeData(uint8_t* pos, uint8_t* value, uint8_t size, const char* name)
|
|
#else //DEBUG_EEPROM_WRITE
|
|
static bool EEPROM_writeData(uint8_t* pos, uint8_t* value, uint8_t size, const char*)
|
|
#endif //DEBUG_EEPROM_WRITE
|
|
{
|
|
#ifdef DEBUG_EEPROM_WRITE
|
|
printf_P(PSTR("EEPROM_WRITE_VAR addr=0x%04x size=0x%02x name=%s\n"), pos, size, name);
|
|
#endif //DEBUG_EEPROM_WRITE
|
|
while (size--)
|
|
{
|
|
|
|
eeprom_update_byte(pos, *value);
|
|
if (eeprom_read_byte(pos) != *value) {
|
|
SERIAL_ECHOLNPGM("EEPROM Error");
|
|
return false;
|
|
}
|
|
|
|
pos++;
|
|
value++;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
#ifdef DEBUG_EEPROM_READ
|
|
static void EEPROM_readData(uint8_t* pos, uint8_t* value, uint8_t size, const char* name)
|
|
#else //DEBUG_EEPROM_READ
|
|
static void EEPROM_readData(uint8_t* pos, uint8_t* value, uint8_t size, const char*)
|
|
#endif //DEBUG_EEPROM_READ
|
|
{
|
|
#ifdef DEBUG_EEPROM_READ
|
|
printf_P(PSTR("EEPROM_READ_VAR addr=0x%04x size=0x%02x name=%s\n"), pos, size, name);
|
|
#endif //DEBUG_EEPROM_READ
|
|
while(size--)
|
|
{
|
|
*value = eeprom_read_byte(pos);
|
|
pos++;
|
|
value++;
|
|
}
|
|
}
|
|
|
|
#define EEPROM_VERSION "V2"
|
|
|
|
#ifdef EEPROM_SETTINGS
|
|
void Config_StoreSettings()
|
|
{
|
|
strcpy(cs.version,"000"); //!< invalidate data first @TODO use erase to save one erase cycle
|
|
|
|
if (EEPROM_writeData(reinterpret_cast<uint8_t*>(EEPROM_M500_base),reinterpret_cast<uint8_t*>(&cs),sizeof(cs),0), "cs, invalid version")
|
|
{
|
|
strcpy(cs.version,EEPROM_VERSION); //!< validate data if write succeed
|
|
EEPROM_writeData(reinterpret_cast<uint8_t*>(EEPROM_M500_base->version), reinterpret_cast<uint8_t*>(cs.version), sizeof(cs.version), "cs.version valid");
|
|
}
|
|
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOLNPGM("Settings Stored");
|
|
}
|
|
#endif //EEPROM_SETTINGS
|
|
|
|
|
|
#ifndef DISABLE_M503
|
|
void Config_PrintSettings(uint8_t level)
|
|
{ // Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown
|
|
#ifdef TMC2130
|
|
printf_P(PSTR(
|
|
"%SSteps per unit:\n%S M92 X%.2f Y%.2f Z%.2f E%.2f\n"
|
|
"%SUStep resolution: \n%S M350 X%d Y%d Z%d E%d\n"
|
|
"%SMaximum feedrates - normal (mm/s):\n%S M203 X%.2f Y%.2f Z%.2f E%.2f\n"
|
|
"%SMaximum feedrates - stealth (mm/s):\n%S M203 X%.2f Y%.2f Z%.2f E%.2f\n"
|
|
"%SMaximum acceleration - normal (mm/s2):\n%S M201 X%lu Y%lu Z%lu E%lu\n"
|
|
"%SMaximum acceleration - stealth (mm/s2):\n%S M201 X%lu Y%lu Z%lu E%lu\n"
|
|
"%SAcceleration: P=print, R=retract, T=travel\n%S M204 P%.2f R%.2f T%.2f\n"
|
|
"%SAdvanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)\n%S M205 S%.2f T%.2f B%.2f X%.2f Y%.2f Z%.2f E%.2f\n"
|
|
"%SHome offset (mm):\n%S M206 X%.2f Y%.2f Z%.2f\n"
|
|
),
|
|
echomagic, echomagic, cs.axis_steps_per_unit[X_AXIS], cs.axis_steps_per_unit[Y_AXIS], cs.axis_steps_per_unit[Z_AXIS], cs.axis_steps_per_unit[E_AXIS],
|
|
echomagic, echomagic, cs.axis_ustep_resolution[X_AXIS], cs.axis_ustep_resolution[Y_AXIS], cs.axis_ustep_resolution[Z_AXIS], cs.axis_ustep_resolution[E_AXIS],
|
|
echomagic, echomagic, cs.max_feedrate_normal[X_AXIS], cs.max_feedrate_normal[Y_AXIS], cs.max_feedrate_normal[Z_AXIS], cs.max_feedrate_normal[E_AXIS],
|
|
echomagic, echomagic, cs.max_feedrate_silent[X_AXIS], cs.max_feedrate_silent[Y_AXIS], cs.max_feedrate_silent[Z_AXIS], cs.max_feedrate_silent[E_AXIS],
|
|
echomagic, echomagic, cs.max_acceleration_units_per_sq_second_normal[X_AXIS], cs.max_acceleration_units_per_sq_second_normal[Y_AXIS], cs.max_acceleration_units_per_sq_second_normal[Z_AXIS], cs.max_acceleration_units_per_sq_second_normal[E_AXIS],
|
|
echomagic, echomagic, cs.max_acceleration_units_per_sq_second_silent[X_AXIS], cs.max_acceleration_units_per_sq_second_silent[Y_AXIS], cs.max_acceleration_units_per_sq_second_silent[Z_AXIS], cs.max_acceleration_units_per_sq_second_silent[E_AXIS],
|
|
echomagic, echomagic, cs.acceleration, cs.retract_acceleration, cs.travel_acceleration,
|
|
echomagic, echomagic, cs.minimumfeedrate, cs.mintravelfeedrate, cs.minsegmenttime, cs.max_jerk[X_AXIS], cs.max_jerk[Y_AXIS], cs.max_jerk[Z_AXIS], cs.max_jerk[E_AXIS],
|
|
echomagic, echomagic, cs.add_homing[X_AXIS], cs.add_homing[Y_AXIS], cs.add_homing[Z_AXIS]
|
|
#else //TMC2130
|
|
printf_P(PSTR(
|
|
"%SSteps per unit:\n%S M92 X%.2f Y%.2f Z%.2f E%.2f\n"
|
|
"%SMaximum feedrates (mm/s):\n%S M203 X%.2f Y%.2f Z%.2f E%.2f\n"
|
|
"%SMaximum acceleration (mm/s2):\n%S M201 X%lu Y%lu Z%lu E%lu\n"
|
|
"%SAcceleration: P=print, R=retract, T=travel\n%S M204 P%.2f R%.2f T%.2f\n"
|
|
"%SAdvanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)\n%S M205 S%.2f T%.2f B%.2f X%.2f Y%.2f Z%.2f E%.2f\n"
|
|
"%SHome offset (mm):\n%S M206 X%.2f Y%.2f Z%.2f\n"
|
|
),
|
|
echomagic, echomagic, cs.axis_steps_per_unit[X_AXIS], cs.axis_steps_per_unit[Y_AXIS], cs.axis_steps_per_unit[Z_AXIS], cs.axis_steps_per_unit[E_AXIS],
|
|
echomagic, echomagic, max_feedrate[X_AXIS], max_feedrate[Y_AXIS], max_feedrate[Z_AXIS], max_feedrate[E_AXIS],
|
|
echomagic, echomagic, max_acceleration_units_per_sq_second[X_AXIS], max_acceleration_units_per_sq_second[Y_AXIS], max_acceleration_units_per_sq_second[Z_AXIS], max_acceleration_units_per_sq_second[E_AXIS],
|
|
echomagic, echomagic, cs.acceleration, cs.retract_acceleration, cs.travel_acceleration,
|
|
echomagic, echomagic, cs.minimumfeedrate, cs.mintravelfeedrate, cs.minsegmenttime, cs.max_jerk[X_AXIS], cs.max_jerk[Y_AXIS], cs.max_jerk[Z_AXIS], cs.max_jerk[E_AXIS],
|
|
echomagic, echomagic, cs.add_homing[X_AXIS], cs.add_homing[Y_AXIS], cs.add_homing[Z_AXIS]
|
|
#endif //TMC2130
|
|
);
|
|
#ifdef PIDTEMP
|
|
printf_P(PSTR("%SPID settings:\n%S M301 P%.2f I%.2f D%.2f\n"),
|
|
echomagic, echomagic, cs.Kp, unscalePID_i(cs.Ki), unscalePID_d(cs.Kd));
|
|
#endif
|
|
#ifdef PIDTEMPBED
|
|
printf_P(PSTR("%SPID heatbed settings:\n%S M304 P%.2f I%.2f D%.2f\n"),
|
|
echomagic, echomagic, cs.bedKp, unscalePID_i(cs.bedKi), unscalePID_d(cs.bedKd));
|
|
#endif
|
|
#ifdef FWRETRACT
|
|
printf_P(PSTR(
|
|
"%SRetract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm)\n%S M207 S%.2f F%.2f Z%.2f\n"
|
|
"%SRecover: S=Extra length (mm) F:Speed (mm/m)\n%S M208 S%.2f F%.2f\n"
|
|
"%SAuto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries\n%S M209 S%d\n"
|
|
),
|
|
echomagic, echomagic, cs.retract_length, cs.retract_feedrate*60, cs.retract_zlift,
|
|
echomagic, echomagic, cs.retract_recover_length, cs.retract_recover_feedrate*60,
|
|
echomagic, echomagic, (cs.autoretract_enabled ? 1 : 0)
|
|
);
|
|
#if EXTRUDERS > 1
|
|
printf_P(PSTR("%SMulti-extruder settings:\n%S Swap retract length (mm): %.2f\n%S Swap rec. addl. length (mm): %.2f\n"),
|
|
echomagic, echomagic, retract_length_swap, echomagic, retract_recover_length_swap);
|
|
#endif
|
|
if (cs.volumetric_enabled) {
|
|
printf_P(PSTR("%SFilament settings:\n%S M200 D%.2f\n"),
|
|
echomagic, echomagic, cs.filament_size[0]);
|
|
#if EXTRUDERS > 1
|
|
printf_P(PSTR("%S M200 T1 D%.2f\n"),
|
|
echomagic, echomagic, cs.filament_size[1]);
|
|
#if EXTRUDERS > 2
|
|
printf_P(PSTR("%S M200 T1 D%.2f\n"),
|
|
echomagic, echomagic, cs.filament_size[2]);
|
|
#endif
|
|
#endif
|
|
} else {
|
|
printf_P(PSTR("%SFilament settings: Disabled\n"), echomagic);
|
|
}
|
|
#endif
|
|
if (level >= 10) {
|
|
#ifdef LIN_ADVANCE
|
|
printf_P(PSTR("%SLinear advance settings:%S M900 K%.2f\n"),
|
|
echomagic, echomagic, extruder_advance_K);
|
|
#endif //LIN_ADVANCE
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
#ifdef EEPROM_SETTINGS
|
|
|
|
static_assert (EXTRUDERS == 1, "ConfigurationStore M500_conf not implemented for more extruders, fix filament_size array size.");
|
|
static_assert (NUM_AXIS == 4, "ConfigurationStore M500_conf not implemented for more axis."
|
|
"Fix axis_steps_per_unit max_feedrate_normal max_acceleration_units_per_sq_second_normal max_jerk max_feedrate_silent"
|
|
" max_acceleration_units_per_sq_second_silent array size.");
|
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
|
static_assert (false, "zprobe_zoffset was not initialized in printers in field to -(Z_PROBE_OFFSET_FROM_EXTRUDER), so it contains"
|
|
"0.0, if this is not acceptable, increment EEPROM_VERSION to force use default_conf");
|
|
#endif
|
|
|
|
static_assert (sizeof(M500_conf) == 196, "sizeof(M500_conf) has changed, ensure that EEPROM_VERSION has been incremented, "
|
|
"or if you added members in the end of struct, ensure that historically uninitialized values will be initialized."
|
|
"If this is caused by change to more then 8bit processor, decide whether make this struct packed to save EEPROM,"
|
|
"leave as it is to keep fast code, or reorder struct members to pack more tightly.");
|
|
|
|
static const M500_conf default_conf PROGMEM =
|
|
{
|
|
EEPROM_VERSION,
|
|
DEFAULT_AXIS_STEPS_PER_UNIT,
|
|
DEFAULT_MAX_FEEDRATE,
|
|
DEFAULT_MAX_ACCELERATION,
|
|
DEFAULT_ACCELERATION,
|
|
DEFAULT_RETRACT_ACCELERATION,
|
|
DEFAULT_MINIMUMFEEDRATE,
|
|
DEFAULT_MINTRAVELFEEDRATE,
|
|
DEFAULT_MINSEGMENTTIME,
|
|
{DEFAULT_XJERK, DEFAULT_YJERK, DEFAULT_ZJERK, DEFAULT_EJERK},
|
|
{0,0,0},
|
|
-(Z_PROBE_OFFSET_FROM_EXTRUDER),
|
|
DEFAULT_Kp,
|
|
DEFAULT_Ki*PID_dT,
|
|
DEFAULT_Kd/PID_dT,
|
|
DEFAULT_bedKp,
|
|
DEFAULT_bedKi*PID_dT,
|
|
DEFAULT_bedKd/PID_dT,
|
|
0,
|
|
false,
|
|
RETRACT_LENGTH,
|
|
RETRACT_FEEDRATE,
|
|
RETRACT_ZLIFT,
|
|
RETRACT_RECOVER_LENGTH,
|
|
RETRACT_RECOVER_FEEDRATE,
|
|
false,
|
|
{DEFAULT_NOMINAL_FILAMENT_DIA,
|
|
#if EXTRUDERS > 1
|
|
DEFAULT_NOMINAL_FILAMENT_DIA,
|
|
#if EXTRUDERS > 2
|
|
DEFAULT_NOMINAL_FILAMENT_DIA,
|
|
#endif
|
|
#endif
|
|
},
|
|
DEFAULT_MAX_FEEDRATE_SILENT,
|
|
DEFAULT_MAX_ACCELERATION_SILENT,
|
|
#ifdef TMC2130
|
|
{ TMC2130_USTEPS_XY, TMC2130_USTEPS_XY, TMC2130_USTEPS_Z, TMC2130_USTEPS_E },
|
|
#else // TMC2130
|
|
{16,16,16,16},
|
|
#endif
|
|
DEFAULT_TRAVEL_ACCELERATION,
|
|
};
|
|
|
|
|
|
static bool is_uninitialized(void* addr, uint8_t len)
|
|
{
|
|
while(len--)
|
|
{
|
|
if(reinterpret_cast<uint8_t*>(addr)[len] != 0xff)
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
|
|
//! @brief Read M500 configuration
|
|
//! @retval true Succeeded. Stored settings retrieved or default settings retrieved in case EEPROM has been erased.
|
|
//! @retval false Failed. Default settings has been retrieved, because of older version or corrupted data.
|
|
bool Config_RetrieveSettings()
|
|
{
|
|
bool previous_settings_retrieved = true;
|
|
char ver[4]=EEPROM_VERSION;
|
|
EEPROM_readData(reinterpret_cast<uint8_t*>(EEPROM_M500_base->version), reinterpret_cast<uint8_t*>(cs.version), sizeof(cs.version), "cs.version"); //read stored version
|
|
// SERIAL_ECHOLN("Version: [" << ver << "] Stored version: [" << cs.version << "]");
|
|
if (strncmp(ver,cs.version,3) == 0) // version number match
|
|
{
|
|
|
|
EEPROM_readData(reinterpret_cast<uint8_t*>(EEPROM_M500_base), reinterpret_cast<uint8_t*>(&cs), sizeof(cs), "cs");
|
|
|
|
|
|
if (cs.max_jerk[X_AXIS] > DEFAULT_XJERK) cs.max_jerk[X_AXIS] = DEFAULT_XJERK;
|
|
if (cs.max_jerk[Y_AXIS] > DEFAULT_YJERK) cs.max_jerk[Y_AXIS] = DEFAULT_YJERK;
|
|
calculate_extruder_multipliers();
|
|
|
|
//if max_feedrate_silent and max_acceleration_units_per_sq_second_silent were never stored to eeprom, use default values:
|
|
for (uint8_t i = 0; i < (sizeof(cs.max_feedrate_silent)/sizeof(cs.max_feedrate_silent[0])); ++i)
|
|
{
|
|
const uint32_t erased = 0xffffffff;
|
|
if (is_uninitialized(&(cs.max_feedrate_silent[i]), sizeof(float))) {
|
|
memcpy_P(&cs.max_feedrate_silent[i],&default_conf.max_feedrate_silent[i], sizeof(cs.max_feedrate_silent[i]));
|
|
}
|
|
if (erased == cs.max_acceleration_units_per_sq_second_silent[i]) {
|
|
memcpy_P(&cs.max_acceleration_units_per_sq_second_silent[i],&default_conf.max_acceleration_units_per_sq_second_silent[i],sizeof(cs.max_acceleration_units_per_sq_second_silent[i]));
|
|
}
|
|
}
|
|
|
|
#ifdef TMC2130
|
|
for (uint8_t j = X_AXIS; j <= Y_AXIS; j++)
|
|
{
|
|
if (cs.max_feedrate_normal[j] > NORMAL_MAX_FEEDRATE_XY)
|
|
cs.max_feedrate_normal[j] = NORMAL_MAX_FEEDRATE_XY;
|
|
if (cs.max_feedrate_silent[j] > SILENT_MAX_FEEDRATE_XY)
|
|
cs.max_feedrate_silent[j] = SILENT_MAX_FEEDRATE_XY;
|
|
if (cs.max_acceleration_units_per_sq_second_normal[j] > NORMAL_MAX_ACCEL_XY)
|
|
cs.max_acceleration_units_per_sq_second_normal[j] = NORMAL_MAX_ACCEL_XY;
|
|
if (cs.max_acceleration_units_per_sq_second_silent[j] > SILENT_MAX_ACCEL_XY)
|
|
cs.max_acceleration_units_per_sq_second_silent[j] = SILENT_MAX_ACCEL_XY;
|
|
}
|
|
|
|
if(cs.axis_ustep_resolution[X_AXIS] == 0xff){ cs.axis_ustep_resolution[X_AXIS] = TMC2130_USTEPS_XY; }
|
|
if(cs.axis_ustep_resolution[Y_AXIS] == 0xff){ cs.axis_ustep_resolution[Y_AXIS] = TMC2130_USTEPS_XY; }
|
|
if(cs.axis_ustep_resolution[Z_AXIS] == 0xff){ cs.axis_ustep_resolution[Z_AXIS] = TMC2130_USTEPS_Z; }
|
|
if(cs.axis_ustep_resolution[E_AXIS] == 0xff){ cs.axis_ustep_resolution[E_AXIS] = TMC2130_USTEPS_E; }
|
|
|
|
tmc2130_set_res(X_AXIS, cs.axis_ustep_resolution[X_AXIS]);
|
|
tmc2130_set_res(Y_AXIS, cs.axis_ustep_resolution[Y_AXIS]);
|
|
tmc2130_set_res(Z_AXIS, cs.axis_ustep_resolution[Z_AXIS]);
|
|
tmc2130_set_res(E_AXIS, cs.axis_ustep_resolution[E_AXIS]);
|
|
#endif //TMC2130
|
|
|
|
if(is_uninitialized(&cs.travel_acceleration, sizeof(cs.travel_acceleration)))
|
|
cs.travel_acceleration = cs.acceleration;
|
|
|
|
reset_acceleration_rates();
|
|
|
|
// Call updatePID (similar to when we have processed M301)
|
|
updatePID();
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOLNPGM("Stored settings retrieved");
|
|
}
|
|
else
|
|
{
|
|
Config_ResetDefault();
|
|
//Return false to inform user that eeprom version was changed and firmware is using default hardcoded settings now.
|
|
//In case that storing to eeprom was not used yet, do not inform user that hardcoded settings are used.
|
|
if (eeprom_read_byte(reinterpret_cast<uint8_t*>(&(EEPROM_M500_base->version[0]))) != 0xFF ||
|
|
eeprom_read_byte(reinterpret_cast<uint8_t*>(&(EEPROM_M500_base->version[1]))) != 0xFF ||
|
|
eeprom_read_byte(reinterpret_cast<uint8_t*>(&(EEPROM_M500_base->version[2]))) != 0xFF)
|
|
{
|
|
previous_settings_retrieved = false;
|
|
}
|
|
}
|
|
#ifdef EEPROM_CHITCHAT
|
|
Config_PrintSettings();
|
|
#endif
|
|
return previous_settings_retrieved;
|
|
}
|
|
#endif
|
|
|
|
void Config_ResetDefault()
|
|
{
|
|
memcpy_P(&cs,&default_conf, sizeof(cs));
|
|
|
|
// steps per sq second need to be updated to agree with the units per sq second
|
|
reset_acceleration_rates();
|
|
|
|
#ifdef PIDTEMP
|
|
updatePID();
|
|
#ifdef PID_ADD_EXTRUSION_RATE
|
|
Kc = DEFAULT_Kc; //this is not stored by Config_StoreSettings
|
|
#endif//PID_ADD_EXTRUSION_RATE
|
|
#endif//PIDTEMP
|
|
|
|
calculate_extruder_multipliers();
|
|
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded");
|
|
|
|
}
|