bd57e00448
When XFLASH is not available, allow users to request _online_ crash dumps by using D23 (since these require active user cooperation). Once enabled, instead of just rebooting, dump memory directly to the serial. As similarly done with EMERGENCY_DUMP, we have two features that can be enabled: EMERGENCY_SERIAL_DUMP: enables dumping on crash after being requested MENU_SERIAL_DUMP: allow triggering the same manually through the support menu.
93 lines
3.2 KiB
C
93 lines
3.2 KiB
C
#ifndef _CONFIG_H
|
|
#define _CONFIG_H
|
|
|
|
|
|
#include "Configuration_prusa.h"
|
|
#include "pins.h"
|
|
|
|
#if (defined(VOLT_IR_PIN) && defined(IR_SENSOR))
|
|
# define IR_SENSOR_ANALOG
|
|
#endif
|
|
|
|
//ADC configuration
|
|
#ifndef IR_SENSOR_ANALOG
|
|
#define ADC_CHAN_MSK 0b0000001001011111 //used AD channels bit mask (0,1,2,3,4,6,9)
|
|
#define ADC_DIDR_MSK 0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
|
|
#define ADC_CHAN_CNT 7 //number of used channels)
|
|
#else //!IR_SENSOR_ANALOG
|
|
#define ADC_CHAN_MSK 0b0000001101011111 //used AD channels bit mask (0,1,2,3,4,6,8,9)
|
|
#define ADC_DIDR_MSK 0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
|
|
#define ADC_CHAN_CNT 8 //number of used channels)
|
|
#endif //!IR_SENSOR_ANALOG
|
|
#define ADC_OVRSAMPL 16 //oversampling multiplier
|
|
#define ADC_CALLBACK adc_ready //callback function ()
|
|
|
|
//SWI2C configuration
|
|
//#define SWI2C_SDA 20 //SDA on P3
|
|
//#define SWI2C_SCL 21 //SCL on P3
|
|
#define SWI2C_A8
|
|
#define SWI2C_DEL 20 //2us clock delay
|
|
#define SWI2C_TMO 2048 //2048 cycles timeout
|
|
|
|
//PAT9125 configuration
|
|
//#define PAT9125_SWSPI // software SPI mode (incomplete)
|
|
#ifdef SWI2C_SCL
|
|
#define PAT9125_SWI2C // software I2C mode
|
|
#else
|
|
#define PAT9125_I2C // hardware I2C mode
|
|
#endif
|
|
|
|
#define PAT9125_I2C_ADDR 0x75 //ID=LO
|
|
//#define PAT9125_I2C_ADDR 0x79 //ID=HI
|
|
//#define PAT9125_I2C_ADDR 0x73 //ID=NC
|
|
#define PAT9125_XRES 0
|
|
#define PAT9125_YRES 240 // maximum resolution (5*X cpi)
|
|
#define PAT9124_YRES_MM (5*PAT9125_YRES/25.4) // counts per mm
|
|
|
|
//SM4 configuration
|
|
#define SM4_DEFDELAY 500 //default step delay [us]
|
|
|
|
//TMC2130 - Trinamic stepper driver
|
|
//pinout - hardcoded
|
|
//spi:
|
|
#define TMC2130_SPI_RATE 0 // fosc/4 = 4MHz
|
|
#define TMC2130_SPCR SPI_SPCR(TMC2130_SPI_RATE, 1, 1, 1, 0)
|
|
#define TMC2130_SPSR SPI_SPSR(TMC2130_SPI_RATE)
|
|
|
|
//LANG - Multi-language support
|
|
//#define LANG_MODE 0 // primary language only
|
|
#define LANG_MODE 1 // sec. language support
|
|
|
|
#define LANG_SIZE_RESERVED 0x3000 // reserved space for secondary language (12288 bytes)
|
|
|
|
//Community language support
|
|
#define COMMUNITY_LANG_NL // Community Dutch language
|
|
//#define COMMUNITY_LANG_QR // Community new language //..use this as a template and replace 'QR'
|
|
|
|
#if defined(COMMUNITY_LANG_NL) //|| defined(COMMUNITY_LANG_QR) //..use last part as a template and replace 'QR'
|
|
#define COMMUNITY_LANG_SUPPORT
|
|
#endif
|
|
|
|
// Sanity checks for correct configuration of XFLASH_DUMP options
|
|
#if defined(XFLASH_DUMP) && !defined(XFLASH)
|
|
#error "XFLASH_DUMP requires XFLASH support"
|
|
#endif
|
|
#if (defined(MENU_DUMP) || defined(EMERGENCY_DUMP)) && !defined(XFLASH_DUMP)
|
|
#error "MENU_DUMP and EMERGENCY_DUMP require XFLASH_DUMP"
|
|
#endif
|
|
|
|
// Support for serial dumps is mutually exclusive with XFLASH_DUMP features
|
|
#if defined(EMERGENCY_DUMP) && defined(EMERGENCY_SERIAL_DUMP)
|
|
#error "EMERGENCY_DUMP and EMERGENCY_SERIAL_DUMP are mutually exclusive"
|
|
#endif
|
|
#if defined(MENU_DUMP) && defined(MENU_SERIAL_DUMP)
|
|
#error "MENU_DUMP and MENU_SERIAL_DUMP are mutually exclusive"
|
|
#endif
|
|
|
|
// Reduce internal duplication
|
|
#if defined(EMERGENCY_DUMP) || defined(EMERGENCY_SERIAL_DUMP)
|
|
#define EMERGENCY_HANDLERS
|
|
#endif
|
|
|
|
#endif //_CONFIG_H
|