3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Enhanced Firmware for Original Prusa i3 3D printer
651 Commits 3 Branches 78 Tags 40 MiB
C++ 72.3%
C 21.8%
Shell 4.7%
Python 1.1%
815dfcb14b
Go to file
bubnikv 815dfcb14b Implemented a stepper timer reset after a long blocking cli() 
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
2018-01-20 15:39:21 +01:00
ArduinoAddons
Firmware Implemented a stepper timer reset after a long blocking cli() 2018-01-20 15:39:21 +01:00
hex_files
LICENSE
README.md

README.md

Original Prusa i3 MK2 Firmware

General instructions

Pre-compiled hex output on PRUSA RESEARCH site: http://prusa3d.com/downloads/firmware/

Just download and flash it to the electronics

Build instructions

Step 1

Install arduino

Step 2

Remove Liquid Crystal library from your arduino or rename it

Step 3

Install the arduino addon located in the root of this repo. Don't forget to install correct version!

Step 4

Copy the configuration file matching your printer from variants folder to the the Firmware folder

Step 5

Rename it to "Configuration_prusa.h"

Step 6

Compile the firmware

Step 7

Upload the firmware to board