3b65aa06c5
We allow resuming from the LCD via start print and resume print, it makes sense to clear the error on stop too. For this reason distinguish whether the action is performed automatically or manually (ie: interactively). The error is only cleared when the command is run interactively.
254 lines
8.0 KiB
C
Executable File
254 lines
8.0 KiB
C
Executable File
#ifndef ULTRALCD_H
|
|
#define ULTRALCD_H
|
|
|
|
#include "mesh_bed_calibration.h"
|
|
#include "config.h"
|
|
|
|
extern void menu_lcd_longpress_func(void);
|
|
extern void menu_lcd_lcdupdate_func(void);
|
|
|
|
// Call with a false parameter to suppress the LCD update from various places like the planner or the temp control.
|
|
void ultralcd_init();
|
|
|
|
//! LCD status severities
|
|
#define LCD_STATUS_CRITICAL 3 //< Heater failure
|
|
#define LCD_STATUS_ALERT 2 //< Other hardware issue
|
|
#define LCD_STATUS_INFO 1 //< Message times out after a while
|
|
#define LCD_STATUS_NONE 0 //< No alert message set
|
|
|
|
#define LCD_STATUS_INFO_TIMEOUT 20000
|
|
|
|
// Set the current status message (equivalent to LCD_STATUS_NONE)
|
|
void lcd_setstatus(const char* message);
|
|
void lcd_setstatuspgm(const char* message);
|
|
void lcd_setstatus_serial(const char* message);
|
|
|
|
//! return to the main status screen and display the alert message
|
|
//! Beware - it has sideeffects:
|
|
//! - always returns the display to the main status screen
|
|
//! - always makes lcd_reset (which is slow and causes flicker)
|
|
//! - does not update the message if there is one with the same (or higher) severity present
|
|
void lcd_setalertstatus(const char* message, uint8_t severity = LCD_STATUS_ALERT);
|
|
void lcd_setalertstatuspgm(const char* message, uint8_t severity = LCD_STATUS_ALERT);
|
|
|
|
//! Get/reset the current alert level
|
|
uint8_t get_message_level();
|
|
void lcd_reset_alert_level();
|
|
|
|
void lcd_adjust_z();
|
|
void lcd_pick_babystep();
|
|
void lcd_alright();
|
|
void show_preheat_nozzle_warning();
|
|
void lcd_wait_interact();
|
|
void lcd_loading_filament();
|
|
void lcd_change_success();
|
|
void lcd_loading_color();
|
|
void lcd_sdcard_stop();
|
|
void lcd_pause_print();
|
|
void lcd_pause_usb_print();
|
|
void lcd_resume_print();
|
|
void lcd_print_stop(); // interactive print stop
|
|
void print_stop(bool interactive=false);
|
|
#ifdef TEMP_MODEL
|
|
void lcd_temp_model_cal();
|
|
#endif //TEMP_MODEL
|
|
void lcd_load_filament_color_check();
|
|
|
|
extern void lcd_belttest();
|
|
extern bool lcd_selftest();
|
|
|
|
void lcd_menu_statistics();
|
|
|
|
void lcd_status_screen(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
|
|
void lcd_menu_extruder_info(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
|
|
void lcd_menu_show_sensors_state(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
|
|
|
|
#ifdef TMC2130
|
|
bool lcd_crash_detect_enabled();
|
|
void lcd_crash_detect_enable();
|
|
void lcd_crash_detect_disable();
|
|
#endif
|
|
|
|
extern const char* lcd_display_message_fullscreen_P(const char *msg, uint8_t &nlines);
|
|
extern const char* lcd_display_message_fullscreen_P(const char *msg);
|
|
|
|
extern void lcd_return_to_status();
|
|
extern void lcd_wait_for_click();
|
|
extern bool lcd_wait_for_click_delay(uint16_t nDelay);
|
|
extern void lcd_show_fullscreen_message_and_wait_P(const char *msg);
|
|
// 0: no, 1: yes, -1: timeouted
|
|
extern int8_t lcd_show_yes_no_and_wait(bool allow_timeouting = true, bool default_yes = false);
|
|
// 0: no, 1: yes, -1: timeouted
|
|
extern int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting = true, bool default_yes = false);
|
|
extern int8_t lcd_show_multiscreen_message_two_choices_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes,
|
|
const char *first_choice, const char *second_choice, uint8_t second_col = 7);
|
|
extern int8_t lcd_show_multiscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting = true, bool default_yes = false);
|
|
// Ask the user to move the Z axis up to the end stoppers and let
|
|
// the user confirm that it has been done.
|
|
|
|
#ifndef TMC2130
|
|
extern bool lcd_calibrate_z_end_stop_manual(bool only_z);
|
|
#endif
|
|
|
|
// Show the result of the calibration process on the LCD screen.
|
|
extern void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, uint8_t point_too_far_mask);
|
|
|
|
extern void lcd_diag_show_end_stops();
|
|
|
|
|
|
#define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
|
|
#define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x))
|
|
#define LCD_MESSAGERPGM(x) lcd_setstatuspgm((x))
|
|
#define LCD_ALERTMESSAGERPGM(x) lcd_setalertstatuspgm((x))
|
|
|
|
|
|
// To be used in lcd_commands_type.
|
|
enum class LcdCommands : uint_least8_t
|
|
{
|
|
Idle,
|
|
LoadFilament,
|
|
StopPrint,
|
|
FarmModeConfirm,
|
|
LongPause,
|
|
PidExtruder,
|
|
Layer1Cal,
|
|
#ifdef TEMP_MODEL
|
|
TempModel,
|
|
#endif //TEMP_MODEL
|
|
NozzleCNG,
|
|
};
|
|
|
|
extern LcdCommands lcd_commands_type;
|
|
extern int8_t FSensorStateMenu;
|
|
|
|
enum class CustomMsg : uint_least8_t
|
|
{
|
|
Status, //!< status message from lcd_status_message variable
|
|
MeshBedLeveling, //!< Mesh bed leveling in progress
|
|
FilamentLoading, //!< Loading filament in progress
|
|
PidCal, //!< PID tuning in progress
|
|
TempCal, //!< PINDA temperature calibration
|
|
TempCompPreheat, //!< Temperature compensation preheat
|
|
M0Wait, //!< M0/M1 Wait command working even from SD
|
|
M117, //!< M117 Set the status line message on the LCD
|
|
Resuming, //!< Resuming message
|
|
};
|
|
|
|
extern CustomMsg custom_message_type;
|
|
extern uint8_t custom_message_state;
|
|
|
|
extern bool UserECoolEnabled();
|
|
extern bool FarmOrUserECool();
|
|
|
|
#ifdef TMC2130
|
|
#define SILENT_MODE_NORMAL 0
|
|
#define SILENT_MODE_STEALTH 1
|
|
#define SILENT_MODE_OFF SILENT_MODE_NORMAL
|
|
#else
|
|
#define SILENT_MODE_POWER 0
|
|
#define SILENT_MODE_SILENT 1
|
|
#define SILENT_MODE_AUTO 2
|
|
#define SILENT_MODE_OFF SILENT_MODE_POWER
|
|
#endif
|
|
|
|
#ifdef IR_SENSOR_ANALOG
|
|
extern bool bMenuFSDetect;
|
|
void printf_IRSensorAnalogBoardChange();
|
|
#endif //IR_SENSOR_ANALOG
|
|
|
|
extern int8_t SilentModeMenu;
|
|
extern uint8_t SilentModeMenu_MMU;
|
|
|
|
extern bool cancel_heatup;
|
|
extern bool isPrintPaused;
|
|
|
|
extern uint8_t scrollstuff;
|
|
|
|
|
|
void lcd_ignore_click(bool b=true);
|
|
void lcd_commands();
|
|
|
|
|
|
extern bool bSettings; // flag (i.e. 'fake parameter') for 'lcd_hw_setup_menu()' function
|
|
void lcd_hw_setup_menu(void); // NOT static due to using inside "util" module ("nozzle_diameter_check()")
|
|
|
|
enum class FilamentAction : uint_least8_t
|
|
{
|
|
None, //!< 'none' state is used as flag for (filament) autoLoad (i.e. opposite for 'autoLoad' state)
|
|
Load,
|
|
AutoLoad,
|
|
UnLoad,
|
|
MmuLoad,
|
|
MmuUnLoad,
|
|
MmuEject,
|
|
MmuCut,
|
|
Preheat,
|
|
Lay1Cal,
|
|
};
|
|
|
|
extern FilamentAction eFilamentAction;
|
|
extern bool bFilamentPreheatState;
|
|
extern bool bFilamentAction;
|
|
void mFilamentItem(uint16_t nTemp,uint16_t nTempBed);
|
|
void mFilamentItemForce();
|
|
void lcd_generic_preheat_menu();
|
|
void unload_filament(bool automatic = false);
|
|
|
|
|
|
void lcd_wait_for_heater();
|
|
void lcd_wait_for_cool_down();
|
|
void lcd_move_e(); // NOT static due to usage in Marlin_main
|
|
|
|
void lcd_temp_cal_show_result(bool result);
|
|
#ifdef PINDA_THERMISTOR
|
|
bool lcd_wait_for_pinda(float temp);
|
|
#endif //PINDA_THERMISTOR
|
|
|
|
|
|
char reset_menu();
|
|
uint8_t choose_menu_P(const char *header, const char *item, const char *last_item = nullptr);
|
|
|
|
void lcd_calibrate_pinda();
|
|
void lcd_temp_calibration_set();
|
|
|
|
#if (LANG_MODE != 0)
|
|
void lcd_language();
|
|
#endif
|
|
|
|
void lcd_wizard();
|
|
bool lcd_autoDepleteEnabled();
|
|
|
|
//! @brief Wizard state
|
|
enum class WizState : uint8_t
|
|
{
|
|
Run, //!< run wizard? Main entry point.
|
|
Restore, //!< restore calibration status
|
|
Selftest, //!< self test
|
|
Xyz, //!< xyz calibration
|
|
Z, //!< z calibration
|
|
#ifdef TEMP_MODEL
|
|
TempModel, //!< Temp model calibration
|
|
#endif //TEMP_MODEL
|
|
IsFil, //!< Is filament loaded? First step of 1st layer calibration
|
|
PreheatPla, //!< waiting for preheat nozzle for PLA
|
|
Preheat, //!< Preheat for any material
|
|
LoadFilCold, //!< Load filament for MMU
|
|
LoadFilHot, //!< Load filament without MMU
|
|
IsPla, //!< Is PLA filament?
|
|
Lay1CalCold, //!< First layer calibration, temperature not selected yet
|
|
Lay1CalHot, //!< First layer calibration, temperature already selected
|
|
RepeatLay1Cal, //!< Repeat first layer calibration?
|
|
Finish, //!< Deactivate wizard
|
|
};
|
|
|
|
void lcd_wizard(WizState state);
|
|
|
|
extern void lcd_experimental_toggle();
|
|
extern void lcd_experimental_menu();
|
|
|
|
#ifdef PINDA_TEMP_COMP
|
|
extern void lcd_pinda_temp_compensation_toggle();
|
|
#endif //PINDA_TEMP_COMP
|
|
|
|
#endif //ULTRALCD_H
|